Exploring S-type orbits in the Pluto-Charon binary system

This work generates, through a sample of numerical simulations of the restricted three-body problem, diagrams of semimajor axis and eccentricity which defines stable and unstable zones for particles in S-type orbits around Pluto and Charon. Since we consider initial conditions with 0 <= e <= 0.99, we found several new stable regions. We also identified the nature of each one of these newly found stable regions. They are all associated to families of periodic orbits derived from the planar circular restricted three-body problem. We have shown that a possible eccentricity of the Pluto-Charon system slightly reduces, but does not destroy, any of the stable regions.

Desenvolvimento da Tecnologia de Soldagem do Titânio pelo Processo TIG Orbital no Segmento Aeroespacial Brasileiro - Parte 2: Caracterização das Juntas Soldadas

In this work, three welding programs for orbital TIG previously developed were used, using pulsed current and increasing speed (M), constant current (#B) and pulsed current and decreasing current (#C). One of those should be used for the propulsion system of the satellite CBERS (CHINA-BRAZIL EARTH RESOURCES SATELLITE). Welded joints using tubes of commercially pure titanium were obtained with these procedures, which were characterized by means of mechanical and metallographic tests. The obtained results show that the three welding procedures produce welded joints free of defects and with adequate shape. Although small differences on mechanical properties and microstructure have been observed, the three welding programs attained compatible results with international standards used in the aerospace segment. The welding program #B, due the reduced heat input used, was considered to obtain slightly advantage over the others.

Quantitative fractography under light microscopy: A digital image processing approach

This work is an example of the improvement on quantitative fractography by means of digital image processing and light microscopy. Two techniques are presented to investigate the quantitative fracture behavior of Ti-4Al-4V heat-treated alloy specimens, under Charpy impact testing. The first technique is the Minkowski method for fractal dimension measurement from surface profiles, revealing the multifractal character of Ti-4Al-4V fracture. It was not observed a clear positive correlation of fractal values against Charpy energies for Ti-4Al-4V alloy specimens, due to their ductility, microstructural heterogeneities and the dynamic loading characteristics at region near the V-notch. The second technique provides an entire elevation map of fracture surface by extracting in-focus regions for each picture from a stack of images acquired at successive focus positions, then computing the surface roughness. Extended-focus reconstruction has been used to explain the behavior along fracture surface. Since these techniques are based on light microscopy, their inherent low cost is very interesting for failure investigations.

Modified LPE system used to diffuse Cd to obtain InSb infrared detectors

We are presenting here p/n junctions obtained with a modified opened liquid-phase epitaxy (LPE) system, used to diffuse indium antimonide (InSb) doped with Cd over InSb doped with Te wafers, in order to make InSb infrared (IR) sensors. This technique has several advantages: the diffusion can be performed in bigger substrate areas improving the device production; this method decreases the device manipulation, decreasing human mistakes and increasing the process reproducibility. The opened LPE in this work produced sensors in the first case with vapor of the diffusion material, coming from a microholed carbon boat full of the diffusion material, over which is positioned the substrate at atmospheric pressure. In the second, the diffusion material is on the bottom of a quartz recipient, and the InSb/Te wafer works as its cover, and vacuum was used. The IR sensors produced with the first method measured 8.9 x 10(7) cm Hz(1/2)/W as detectivity value and higher IR spectral response at 4.6 mu m, and those produced with the second 2.8 x 10(9) cm Hz(1/2)/W, at 4.4 mu m. Besides the electrical-optical properties, the structural properties of diffused layers were investigated by X-ray diffraction (XRD), scanning electron and atomic force microscopy (SEM, AFM), energy-dispersive and secondary ion mass spectroscopy (EDS, SIMS). (C) 2007 Elsevier B.V. All rights reserved.

An investigation on sliding wear behavior of PVD coatings

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fatigue behavior of PVD coated Ti-6Al-4V alloy

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A Study of the Effect of Nitrogen and Air Plasma Immersion Ion Implantation Treatments on the Properties of Carbon Fiber

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Discoloration process modeling by neural network

The photo-oxidation of acid orange 52 dye was performed in the presence of H2O2, utilizing UV light, aiming the discoloration process modeling and the process variable influence characterization. The discoloration process was modeled by the use of feedforward neural network. Each sample was characterized by five independent variables (dye concentration, pH, hydrogen peroxide volume, temperature and time of operation) and a dependent variable (absorbance). The neural model has also provided, through Garson Partition coefficients and the Pertubation method, the independent variable influence order determination. The results indicated that the time of operation was the predominant variable and reaction mean temperature was the lesser influent variable. The neural model obtained presented coefficients of correlation on the order 0.98, for sets of trainability, validation and testing, indicating the power of prediction of the model and its character of generalization. (c) 2007 Elsevier B.V. All rights reserved.

Influence of Excitation Signal on Impedance-based Structural Health Monitoring

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Optimal Frequency Range Selection for PZT Transducers in Impedance-Based SHM Systems

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produtividade do milho safrinha e modificações químicas de um latossolo em sistema plantio direto em função de espécies de cobertura após calagem superficial

Modern agriculture is undergoing profound changes, with demands for more efficient management practices in the production systems used in each area. The objectives of this study were: to evaluate the effect of different covering species on a no-tillage system; to find the results of lime application on soil surface after sowing those forage species; measure the effects on soil chemical properties and subsequent effect on corn yield; and to determine the dry matter produced by each species used. The experiment was conducted on November, 2002, in the town of Palotina, Parana State, Brazil. A randomized block design was used, with 4 repetitions, in a 2x6 factorial scheme -two depths of soil sampling (0-10 and 10-20 cm) and six types of forage covering on the soil (Mucuna deeringiana, Crotalaria juncea, Setaria incana, Pennisetum glancum and Eleusine gracilis, as well as a mix of all these species). 3 t ha(-1) of dolomitic limestone were applied in total surface area, without amending. The covering species associated with the surface limestone application showed improvement in soil fertility, mainly in the layer of 10-20 cm, with prominence to Elensine gracilis, Crotalaria juncea and Setaria incana. Eleusine gracilis and Crotalaria juncea featured the largest dry matter production; however, the great amount of straw of Eleusine gracilis damaged the productivity of corn. Grain and corn straw productivity was higher when previously cultivated along with Setaria incana and the mix of forage species covering.

Movimentos sociais e transformação societária: concepções teóricas presentes na tradição marxista

Este ensaio tem como objetivo discutir premissas de análise da temática movimentos sociais e transformação societária presentes na formulação marxista. Para tanto, retoma o pensamento de autores clássicos, em especial, Lênin, Rosa Luxemburgo e Gramsci. Destaca, com base nesses autores, as determinações fundamentais para a análise das lutas sociais da classe trabalhadora, enfatizando a teoria da organização, a ampla participação das massas e a construção de uma nova hegemonia

A questão urbana e a produção acadêmica do Serviço Social brasileiro em foco

O artigo aborda a questão urbana como objeto de pesquisa do Serviço Social. Resulta de pesquisa teórica e de análise das produções sobre esta temática, tendo por base artigos dos anais dos Encontros Nacionais de Pesquisadores em Serviço Social (ENPESS), no período 2000-2010. A ampliação e diversidade de espaços sócio-ocupacionais não correspondem necessariamente ao desenvolvimento de pesquisas, com aprofundamento teórico-metodológico exigido pela complexidade da questão urbana na contemporaneidade. Há crescente interesse pela temática de pesquisadores, profissionais e estudantes e esforços de sistematização e pesquisa evidenciados no número de trabalhos e na busca de qualidade dos mesmos. Mas há também necessidade de aprofundamento teórico-metodológico para uma produção do conhecimento em consonância com o Projeto Ético-Politico, o que supõe construção de vias de superação da sociabilidade capitalista

Influence of rutin treatment on biochemical alterations in experimental diabetes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A percepção dos moradores da comunidade do Passo da Pátria em Natal-RN

This essay: The perception environmental of the Passo da Pátria dwellers in Natal-RN has as its goal, investigate the perception of the dwellers in an degraded environment in ways of urbanizing, at the Potengi River riverine. This is an area in zone environmental risk, which year after year was even forgotten by the municipality, but which attracted a huge estranger public because of its facility in access urbanized areas in Natal at the same rate of its natural riches from the mangue and the sea. Front to problems of economical nature as scarce job offers, its habitants build their dwellings without any kind order or social protection, occupying an inadequate space for the well keeping of the urban environmental equilibrium. The analyzed community is exposed to water floods, tropical diseases, and to criminal problems like gangsters and drug dealers. We propose in such essay observe the connivance of the dwellers with the natural environment and their expectations o citizen transformations. This essay has as its bases the studies of Tuan (1983), Nunes (2000) and principally in Wilhem Reich (1998) in who we found our concept of perception, that here plays like an important analytical category to confront our corpus. Our first chapter debates the concept of place, not in an historical materialistic vision, but within an phenomenological survey; the second chapter presents the impacts of the urbanization in the community perception, and in the third one is analyzed the perception of the Passo da Pátria community. Based in this analyzes we confirmed that the conditions of living of the dwellers are extremely dangerous; but, the most of them do not see such dangers, even saying that are well living in its community