Low-pressure environment and remodelling of the forearm vein in Brescia-Cimino haemodialysis access.

BACKGROUND: The aim of the study was to determine which, and to what extent, haemodynamic parameters contribute to the remodelling of the venous limb of the Brescia-Cimino haemodialysis access. METHODS: The dimensions of the radial artery and the venous limb of the haemodialysis access were measured by an echo-tracking technique. In six ESRD patients undergoing primary arteriovenous fistula (AVF) formation, vessel diameter, wall thickness, blood pressure and blood flow were measured after the operation, and at 1 and 3 months follow-up. The contralateral forearm vessels in their native position served as baseline values for comparison. RESULTS: The diameter of the proximal antecubital vein progressively increased over the study period without reaching significant differences (4430, 5041 and 6620 microm at weeks 1, 4 and 12 respectively), whereas the intima-media thickness remained unchanged. The venous dilatation was associated with a reduction of the mean shear stress that culminated after the operation and progressively returned to normal venous values at 3 months (24.5 vs 10.4 dyne/cm(2), P<0.043). Thus the venous limb of the AVF undergoes eccentric hypertrophy as demonstrated by the increase in wall cross-sectional area (4.42 vs 6.32 mm(2) at week 1 vs week 12, P<0.028). At the time of the operation, the blood pressure in the AVF was 151+/-14/92.4+/-11 mmHg vs 49+/-19/24.5+/-6 mmHg (means+/-SEM) for the radial artery and the venous limb of the vascular access, respectively. One year after the operation the blood pressure in the venous limb had not changed: 42+/-14/25.3+/-7 mmHg (means+/-SEM). Under these conditions, the systolo-diastolic diameter changes observed in the radial artery and the antecubital vein were within a similar range at all time points: 56+/-17 vs 90+/-26 microm (means+/-SEM) at week 12. CONCLUSIONS: The increased circumferential stress resulting from the flow-mediated dilatation rather than the elevation of blood pressure appears to represent the main contributing factor to the eccentric hypertrophy of the venous limb of Brescia-Cimino haemodialysis access.

Stable isotope compositions of mammoth teeth from Niederweningen, Switzerland: Implications for the Late Pleistocene climate, environment, and diet

Oxygen and carbon isotope compositions of well-preserved mammoth teeth from the Middle Wurmian (40-70 ka) peat layer of Niederweningen, the most important mammoth site in Switzerland, were analysed to reconstruct Late Pleistocene palaeoclimatic and palaeoenvironmental conditions. Drinking water (delta(18)O values of approximately -12.3 +/- 0.9 parts per thousand were calculated front oxygen isotope compositions of mammoth tooth enamel apatite using a species-specific calibration for modern elephants. These delta(18)O(H2O) values reflect the mean oxygen isotope composition of the palaeo-precipitation and are similar to those directly measured for fate Pleistocene groundwater from aquifers in northern Switzerland and southern Germany. Using a present-day delta(18)O(H2)o-precipitation-air temperature relation for Switzerland, a mean annual air temperature (MAT) of around 4.3 +/- 2.1 degrees C can be calculated for the Middle Wurmian at this site. This MAT is in good agreement with palaeotemperature estimates on the basis of Middle Wurmian groundwater recharge temperatures and beetle assemblages. Hence, the climatic conditions in this region were around 4 degrees C cooler during the Middle Wurmian interstadial phase, around 45-50ka BP, than they are today. During this period the mammoths from Niederweningen lived in an open tundra-like, C(3) plant-dominated environment as indicated by enamel (delta(13)C values of -11.5 +/- 0.3 parts per thousand and pollen and macroplant fossils found in the embedding peat. The low variability of enamel delta(13)C and delta(18)O values from different mammoth teeth reflects similar environmental conditions and supports a relatively small time frame for the fossil assemblage. (C) 2006 Elsevier Ltd and INQUA. All rights reserved.

Gènes, environnement et neurodéveloppement: te cas de la schizophrénie [Schizophrenia: genes, environment and neurodevelopment].

Psychoses are complex diseases resulting from the interaction between genetic vulnerability factors and various environmental risk factors during the brain development and leading to the emergence of the clinical phenotype at the end of adolescence. Among the mechanisms involved, a redox imbalance plays an important role, inducing oxidative stress damaging to developing neurons. As a consequence, the excitatory/inhibitory balance in cortex and the pathways connecting brain areas are both impaired. Childhood and adolescence appear as critical periods of vulnerability for deleterious environmental insults. Antioxidants, applied during the environmental impacts, should allow preventing these impairments as well as their clinical consequences.

Diet and breeding success of long-eared owls in a semi-arid environment

Only a few studies, and mostly in temperate climates in Europe, have examined the breeding and diet of long-eared owls (Asia otus) compared to studies of cavity-breeding owls, possibly because of the difficulties in reaching the nests of the former. Here we studied a population of long-eared owls, monitoring the diet of breeding owls and that of owls at a communal roost, every two to three months during 2006 -2009, in a semi-arid region in Israel. It was found that the studied owls produced more young than in most countries in Europe. Diet was not associated with breeding parameters of the owls, whereas laying date was negatively correlated with both clutch size and number of nestlings. We found that more social voles (Microtus socialis) and fewer birds and house mice (Mus musculus) made up the diet at nests than that of adults at the roosts. The diet and breeding of long-eared owls in Israel differ from that in Europe, with birds and mice comprising an important part of the diet, in addition to voles.

Office of Location and Environment Manual, August 2009

This manual captures the experience of practitioners in the Iowa Department of Transportation’s (Iowa DOT’s) Office of Location and Environment (OLE). It also documents the need for coordinated project development efforts during the highway project planning, or location study phase and engineering design. The location study phase establishes: * The definition of, and need for, the highway improvement project * The range of alternatives and many key attributes of the project’s design * The recommended alternative, its impacts, and the agreed-to conditions for project approval The location study process involves developing engineering alternatives, collecting engineering and environmental data, and completing design refinements to accomplish functional designs. The items above also embody the basic content required for projects compliant with the National Environmental Policy Act (NEPA) of 19691, which directs federal agencies to use a systematic, interdisciplinary approach during the planning process whenever proposed actions (or “projects”) have the potential for environmental impacts. In doing so, NEPA requires coordination with stakeholders, review, comment, and public disclosure. Are location studies and environmental studies more about the process or the documents? If properly conducted, they concern both—unbiased and reasonable processes with quality and timely documents. In essence, every project is a story that needs to be told. Engineering and environmental regulations and guidance, as documented in this manual, will help project staff and managers become better storytellers.

Supplemental Information to the August 2008 Agriculture and Environment Task Force Report, August 2008

The Rebuild Iowa Agriculture and Environment Task Force respectfully submits its report to the Rebuild Iowa Advisory Commission (RIAC) for consideration of the impacts of the tornadoes, storms, high winds, and flooding affecting Iowa’s agriculture sector and environment. The Task Force was required to address very complex and multi-faceted issues. Understanding that there were a broad range of immediate concerns, as well as critical issues that need to be addressed in the future, the Task Force structured its work in two sessions. To better address the issues and priorities of the Task Force, this report categorizes the issues as agriculture, conservation, environment, and livestock.

Management of nanomaterials safety in research environment

Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health). The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3 - highest hazard to Nano1 - lowest hazard). Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material) are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal). The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and management are promoting innovation and discoveries by ensuring them a safe environment even in the case of very novel products. The proposed measures are not considered as constraints but as a support to their research. This methodology is being implemented at the Ecole Polytechnique de Lausanne in over 100 research labs dealing with nanomaterials. It is our opinion that it would be useful to other research and academia institutions as well. [Authors]

Applicability of a distributed watershed pollution model in a data-poor environment in Santa Catarina State, Brazil

Intensification of agricultural production without a sound management and regulations can lead to severe environmental problems, as in Western Santa Catarina State, Brazil, where intensive swine production has caused large accumulations of manure and consequently water pollution. Natural resource scientists are asked by decision-makers for advice on management and regulatory decisions. Distributed environmental models are useful tools, since they can be used to explore consequences of various management practices. However, in many areas of the world, quantitative data for model calibration and validation are lacking. The data-intensive distributed environmental model AgNPS was applied in a data-poor environment, the upper catchment (2,520 ha) of the Ariranhazinho River, near the city of Seara, in Santa Catarina State. Steps included data preparation, cell size selection, sensitivity analysis, model calibration and application to different management scenarios. The model was calibrated based on a best guess for model parameters and on a pragmatic sensitivity analysis. The parameters were adjusted to match model outputs (runoff volume, peak runoff rate and sediment concentration) closely with the sparse observed data. A modelling grid cell resolution of 150 m adduced appropriate and computer-fit results. The rainfall runoff response of the AgNPS model was calibrated using three separate rainfall ranges (< 25, 25-60, > 60 mm). Predicted sediment concentrations were consistently six to ten times higher than observed, probably due to sediment trapping along vegetated channel banks. Predicted N and P concentrations in stream water ranged from just below to well above regulatory norms. Expert knowledge of the area, in addition to experience reported in the literature, was able to compensate in part for limited calibration data. Several scenarios (actual, recommended and excessive manure applications, and point source pollution from swine operations) could be compared by the model, using a relative ranking rather than quantitative predictions.

Council Bluffs Interstate System (I-29, I-80 and I-480) Final Environment Impact Statement, July, 2005

The Iowa Department of Transportation (Iowa DOT), Nebraska Department of Roads (NDOR), and the Federal Highway Administration (FHWA) are proposing improvements to the interstate system in the Omaha/Council Bluffs metropolitan area, extending across the Missouri River on Interstate 80 (I-80) to east of the Interstate 480 (I-480) interchange in Omaha, Nebraska (see Figure 1-1). The study considers long-term, broad-based transportation improvements along Interstate I-29 (I-29), I-80, and I-480, including approximately 18 mainline miles of interstate and 14 interchanges (3 system1, 11 service), that would add capacity and correct functional issues along the mainline and interchanges and upgrade the I-80 Missouri River Crossing. These improvements, once implemented, would bring the segments of I-80 and I-29 up to current engineering standards and modernize the roadway to accommodate future traffic needs.

Effect of the environment inside and outside the cage on the activity and behaviour test performance of silver foxes

Selostus: Kasvatushäkin ympäristön vaikutus hopeakettujen käyttäytymiseen

The efficacy of a protective cream in a real-world apprentice hairdresser environment.

The object of this study was to compare the protective action of a new barrier cream (Excipial Protect, Spirig Pharma AG, Egerkingen, Switzerland) to its vehicle in the context of hand irritation of apprentice hairdressers caused by repeated shampooing and exposure to hair-care products. This was a double-blind cross-over comparing Excipial Protect (containing aluminium chlorohydrate 5% as active ingredient) against its vehicle alone. The efficacy of the creams was evaluated taking into account: (1) clinical scores by researchers, (2) biometric measurements, (3) subjective opinions of the subjects. An analysis of variance was performed considering order of application, degree of atopy, and reported number of shampoos. We observed very little difference in efficacy between the protective cream and its vehicle. The presence, however, of aluminium chlorhydrate in the protective cream was shown to have a positive effect against work-related irritation. The cosmetic qualities of the creams seemed, to the participants, to be as important as their real protective and hydrating properties, an important factor in compliance issues.

Decomposing Cross-Country Gaps in Obesity and Overweight: Does the Social Environment Matter?

[cat] Una qüestió clau sobre la producció de salut relativament poc explorada es refereix a la influència dels factors socioeconòmics i mediambientals sobre el pes i l’obesitat. Aquesta problemàtica adquireix particular rellevància quan es comparen dos països Mediterranis com Itàlia i Espanya. És interessant adonar-se que l’obesitat a Espanya és 5 punts percentual més elevada al 2003 mentre que a l’any 1990 era aproximadament la mateixa en ambdós països. Aquesta article presenta una descomposició no lineal dels gaps o diferencials en taxes de sobrepès (índex de massa corporal – IMC- entre 25 i 29.9 9 kg/m2), obesitat classe 1 (IMC≥30 kg/m2) i classe 2 (IMC≥35 kg/m2) entre Espanya i Itàlia per gènere i grups d’edat. En explicar aquests gaps entre països aïllem les influències dels estils de vida, els efectes socioeconòmics i els mediambientals. Els nostres resultats indiquen que quan no es controla pels efectes mediambientals (efectes de grup o ‘peer effects’) els hàbits alimentaris i el nivell educatiu són els principals predictors del gaps totals entre països (36-52%), si bé aquests dos factors exerceixen un impacte diferenciat segons gènere i edat. Un tant paradoxalment, quan controlem pels efectes de grup aquests predictors perden la seva capacitat explicativa i els efectes de grup passen a explicar entre el 46-76% dels gaps en sobrepès i obesitat i mostren un patró creixent amb l’edat.