Stability analysis of the 2007 Chehalis lake landslide based on long-range terrestrial photogrammetry and airborne LIDAR data

On December 4th 2007, a 3-Mm3 landslide occurred along the northwestern shore of Chehalis Lake. The initiation zone is located at the intersection of the main valley slope and the northern sidewall of a prominent gully. The slope failure caused a displacement wave that ran up to 38 m on the opposite shore of the lake. The landslide is temporally associated with a rain-on-snow meteorological event which is thought to have triggered it. This paper describes the Chehalis Lake landslide and presents a comparison of discontinuity orientation datasets obtained using three techniques: field measurements, terrestrial photogrammetric 3D models and an airborne LiDAR digital elevation model to describe the orientation and characteristics of the five discontinuity sets present. The discontinuity orientation data are used to perform kinematic, surface wedge limit equilibrium and three-dimensional distinct element analyses. The kinematic and surface wedge analyses suggest that the location of the slope failure (intersection of the valley slope and a gully wall) has facilitated the development of the unstable rock mass which initiated as a planar sliding failure. Results from the three-dimensional distinct element analyses suggest that the presence, orientation and high persistence of a discontinuity set dipping obliquely to the slope were critical to the development of the landslide and led to a failure mechanism dominated by planar sliding. The three-dimensional distinct element modelling also suggests that the presence of a steeply dipping discontinuity set striking perpendicular to the slope and associated with a fault exerted a significant control on the volume and extent of the failed rock mass but not on the overall stability of the slope.

Mechanisms of agglomeration: Evidence from the location of new manufacturing firms in Spain

El objetivo de esta investigación es aportar evidencia sobre las fuentes de las economías de aglomeración para el caso español. De todas las maneras posibles que se han tomado en la literatura para medir las economías de aglomeración, nosotros lo analizamos a partir de las decisiones de localización de las empresas manufactureras. La literatura reciente ha puesto de relieve que el análisis basado en la disyuntiva localización / urbanización (relaciones dentro de un mismo sector) no es suficiente para entender las economías de aglomeración. Sin embargo, las relaciones entre los diferentes sectores sí resultan significativas al examinar por qué las empresas que pertenecen a diferentes sectores se localizan unas al lado de las otras. Con esto en mente, intentamos explicar que relaciones entre diferentes sectores pueden explicar coaglomeración. Para ello, nos centramos en aquellas relaciones entre sectores definidos a partir de los mecanismos de aglomeración de Marshall, es decir, labor market, input sharing y knowledge spillovers. Trabajamos con el labor market pooling en la medida en que los dos sectores utilizan los mismos trabajadores (clasificación de ocupaciones). Con el segundo mecanismo de Marshall, input sharing, introducimos cómo dos sectores tienen una relación de comprador / vendedor. Por último, nos referimos a dos sectores que utilizan las mismas tecnologías en cuanto a los knowledge spillovers. Con el fin de capturar todos los efectos de los mecanismos de aglomeracion en España, en esta investigación trabajamos con dos ámbitos geográficos, los municipios y los mercados de trabajo locales. La literatura existente nunca se ha puesto de acuerdo en cual es el ámbito geográfico en el que mejor trabajan los mecanismos Marshall, por lo que hemos cubierto todas las unidades geográficas potenciales.

On the effect of the geographical scope of agglomeration economies on firm location

This article analyses how agglomeration economies shaped the location decisions of new manufacturing start-ups in Catalan municipalities in 2001-2005. We estimate whether the locations of new firms are spatially autocorrelated and whether this phenomenon is industry-specific. Our aim is to estimate the geographical scope of agglomeration economies on firm entries. The data set comes from a compulsory register of manufacturing establishments (REIC: Catalan Manufacturing Establishments Register). JEL classification: R1, R3 Keywords: firm location; spatial autocorrelation

Location Determinants of New Firms: Does Skill Level of Human Capital Really Matter?

This paper is about the role played by stock of human capital on location decisions of new manufacturing plants. We analyse the effect of several skill levels (from basic school to PhD) on decisions about the location of plants in various industries and, therefore, of different technological levels. We also test whether spatial aggregation level biases the results and determine the most appropriate areas to be considered in analyses of these phenomena. Our main statistical source is the Register of Manufacturing Establishments of Catalonia (REIC), which has plant-level microdata on the locations of new manufacturing plants. Keywords: agglomeration economies, industrial location, human capital, count-data models, spatial econometrics.

Industrial Location and Space: New Insights

This paper tries to resolve some of the main shortcomings in the empirical literature of location decisions for new plants, i.e. spatial effects and overdispersion. Spatial effects are omnipresent, being a source of overdispersion in the data as well as a factor shaping the functional relationship between the variables that explain a firm’s location decisions. Using Count Data models, empirical researchers have dealt with overdispersion and excess zeros by developments of the Poisson regression model. This study aims to take this a step further, by adopting Bayesian methods and models in order to tackle the excess of zeros, spatial and non-spatial overdispersion and spatial dependence simultaneously. Data for Catalonia is used and location determinants are analysed to that end. The results show that spatial effects are determinant. Additionally, overdispersion is descomposed into an unstructured iid effect and a spatially structured effect. Keywords: Bayesian Analysis, Spatial Models, Firm Location. JEL Classification: C11, C21, R30.

Electrode location and clinical outcome in hippocampal electrical stimulation for mesial temporal lobe epilepsy.

PURPOSE: To study the clinical outcome in hippocampal deep brain stimulation (DBS) for the treatment of patients with refractory mesial temporal lobe epilepsy (MTLE) according to the electrode location. METHODS: Eight MTLE patients implanted in the hippocampus and stimulated with high-frequency DBS were included in this study. Five underwent invasive recordings with depth electrodes to localize ictal onset zone prior to chronic DBS. Position of the active contacts of the electrode was calculated on postoperative imaging. The distances to the ictal onset zone were measured as well as atlas-based hippocampus structures impacted by stimulation were identified. Both were correlated with seizure frequency reduction. RESULTS: The distances between active electrode location and estimated ictal onset zone were 11±4.3 or 9.1±2.3mm for patients with a >50% or <50% reduction in seizure frequency. In patients (N=6) showing a >50% seizure frequency reduction, 100% had the active contacts located <3mm from the subiculum (p<0.05). The 2 non-responders patients were stimulated on contacts located >3mm to the subiculum. CONCLUSION: Decrease of epileptogenic activity induced by hippocampal DBS in refractory MTLE: (1) seems not directly associated with the vicinity of active electrode to the ictal focus determined by invasive recordings; (2) might be obtained through the neuromodulation of the subiculum.

Hard instances of algorithms and proof systems

"Vegeu el resum a l'inici del document del fitxer adjunt."

Approximation algorithms for two-state anti-ferromagnetic spin systems on bounded degree graphs

In a seminal paper [10], Weitz gave a deterministic fully polynomial approximation scheme for counting exponentially weighted independent sets (which is the same as approximating the partition function of the hard-core model from statistical physics) in graphs of degree at most d, up to the critical activity for the uniqueness of the Gibbs measure on the innite d-regular tree. ore recently Sly [8] (see also [1]) showed that this is optimal in the sense that if here is an FPRAS for the hard-core partition function on graphs of maximum egree d for activities larger than the critical activity on the innite d-regular ree then NP = RP. In this paper we extend Weitz's approach to derive a deterministic fully polynomial approximation scheme for the partition function of general two-state anti-ferromagnetic spin systems on graphs of maximum degree d, up to the corresponding critical point on the d-regular tree. The main ingredient of our result is a proof that for two-state anti-ferromagnetic spin systems on the d-regular tree, weak spatial mixing implies strong spatial mixing. his in turn uses a message-decay argument which extends a similar approach proposed recently for the hard-core model by Restrepo et al [7] to the case of general two-state anti-ferromagnetic spin systems.

Growth in a Cross-Section of Cities: Location, Increasing Returns or Random Growth?

This article analyzes empirically the main existing theories on income and population city growth: increasing returns to scale, locational fundamentals and random growth. To do this we implement a threshold nonlinearity test that extends standard linear growth regression models to a dataset on urban, climatological and macroeconomic variables on 1,175 U.S. cities. Our analysis reveals the existence of increasing returns when per-capita income levels are beyond $19; 264. Despite this, income growth is mostly explained by social and locational fundamentals. Population growth also exhibits two distinct equilibria determined by a threshold value of 116,300 inhabitants beyond which city population grows at a higher rate. Income and population growth do not go hand in hand, implying an optimal level of population beyond which income growth stagnates or deteriorates

Multisensory mechanisms in temporo-parietal cortex support self-location and first-person perspective.

Self-consciousness has mostly been approached by philosophical enquiry and not by empirical neuroscientific study, leading to an overabundance of diverging theories and an absence of data-driven theories. Using robotic technology, we achieved specific bodily conflicts and induced predictable changes in a fundamental aspect of self-consciousness by altering where healthy subjects experienced themselves to be (self-location). Functional magnetic resonance imaging revealed that temporo-parietal junction (TPJ) activity reflected experimental changes in self-location that also depended on the first-person perspective due to visuo-tactile and visuo-vestibular conflicts. Moreover, in a large lesion analysis study of neurological patients with a well-defined state of abnormal self-location, brain damage was also localized at TPJ, providing causal evidence that TPJ encodes self-location. Our findings reveal that multisensory integration at the TPJ reflects one of the most fundamental subjective feelings of humans: the feeling of being an entity localized at a position in space and perceiving the world from this position and perspective.

Extreme Precipitation Modelling Using Geostatistics and Machine Learning Algorithms

The paper presents an approach for mapping of precipitation data. The main goal is to perform spatial predictions and simulations of precipitation fields using geostatistical methods (ordinary kriging, kriging with external drift) as well as machine learning algorithms (neural networks). More practically, the objective is to reproduce simultaneously both the spatial patterns and the extreme values. This objective is best reached by models integrating geostatistics and machine learning algorithms. To demonstrate how such models work, two case studies have been considered: first, a 2-day accumulation of heavy precipitation and second, a 6-day accumulation of extreme orographic precipitation. The first example is used to compare the performance of two optimization algorithms (conjugate gradients and Levenberg-Marquardt) of a neural network for the reproduction of extreme values. Hybrid models, which combine geostatistical and machine learning algorithms, are also treated in this context. The second dataset is used to analyze the contribution of radar Doppler imagery when used as external drift or as input in the models (kriging with external drift and neural networks). Model assessment is carried out by comparing independent validation errors as well as analyzing data patterns.

Break zones in the distributions of alleles and species in alpine plants

Aim  We test for the congruence between allele-based range boundaries (break zones) in silicicolous alpine plants and species-based break zones in the silicicolous flora of the European Alps. We also ask whether such break zones coincide with areas of large elevational variation.Location  The European Alps.Methods  On a regular grid laid across the entire Alps, we determined areas of allele- and species-based break zones using respective clustering algorithms, identifying discontinuities in cluster distributions (breaks), and quantifying integrated break densities (break zones). Discontinuities were identified based on the intra-specific genetic variation of 12 species and on the floristic distribution data from 239 species, respectively. Coincidence between the two types of break zones was tested using Spearman's correlation. Break zone densities were also regressed on topographical complexity to test for the effect of elevational variation.Results  We found that two main break zones in the distribution of alleles and species were significantly correlated. Furthermore, we show that these break zones are in topographically complex regions, characterized by massive elevational ranges owing to high mountains and deep glacial valleys. We detected a third break zone in the distribution of species in the eastern Alps, which is not correlated with topographic complexity, and which is also not evident from allelic distribution patterns. Species with the potential for long-distance dispersal tended to show larger distribution ranges than short-distance dispersers.Main conclusions  We suggest that the history of Pleistocene glaciations is the main driver of the congruence between allele-based and species-based distribution patterns, because occurrences of both species and alleles were subject to the same processes (such as extinction, migration and drift) that shaped the distributions of species and genetic lineages. Large elevational ranges have had a profound effect as a dispersal barrier for alleles during post-glacial immigration. Because plant species, unlike alleles, cannot spread via pollen but only via seed, and thus disperse less effectively, we conclude that species break zones are maintained over longer time spans and reflect more ancient patterns than allele break zones.Conny Thiel-Egenter and Nadir Alvarez contributed equally to this paper and are considered joint first authors.