A procedure to evaluate the efficiency of utilization of dietary amino acid for poultry

The aim of this study was to develop a procedure based on Gompertz function to determine the efficiency of utilization of amino acid. The procedure was applied to determine the efficiency of utilization of dietary lysine, methionine+cystine and threonine by growing pullets and based on the efficiencies were estimated the requirements for the growth phase of birds. The Gompertz function was fitted to the data of feed intake, body weight, feather-free body protein weight and feather protein weight of four strains of laying hens in the growth phase. The rates of consumption and daily protein deposition (PD) were calculated. The amino acid deposition was obtained by multiplying the PD by the amino acid concentration in feather protein and feather-free body protein. The results showed that the efficiency of utilization of amino acid decreased with maturity and, conversely, there was a proportional increase of the requirement per kg of weight gain. The procedure based on the Gompertz function to determine the efficiency of utilization of amino acid proved to be suitable to evaluate the efficiency of utilization of amino acid and can be a useful tool to diagnose the effectiveness of the nutritional management, aiding in decision-making on the nutritional management.

Utilization of teflon and aluminum oxide for wheel cleaning in Minimum Quantity Lubrication (MQL) grinding

Researches concerning cooling-lubrication optimization in grinding have been conducted to contribute to a more sustainable process. An alternative to flood coolant is minimum quantity lubrication (MQL), which spray oil droplets in a compressed air jet. However, problems related to wheel cleaning were reported, due to wheel loading by a mixture of chips and oil, resulting in worsening of surface quality. This work aims to evaluate the viability of Teflon and aluminum oxide for wheel cleaning, compared to MQL without cleaning and MQL with cleaning by compressed air, through the following output variables: surface roughness, roundness, wheel wear, grinding power and acoustic emission. Vickers microhardness measurements and optical microscopy were also carried out. The results showed that both materials were efficient in cleaning the wheel, compared to MQL without cleaning, but not as satisfactory as compressed air. Much work is to be done in order to select the right material for wheel cleaning.

Utilization of Minimum Quantity Lubrication (MQL) with Water in CBN Grinding of Steel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

THE PARASITOID, Cotesia flavipes (CAMERON) (HYMENOPTERA: BRACONIDAE), INFLUENCES FOOD CONSUMPTION AND UTILIZATION BY LARVAL Diatraea saccharalis (F.) (LEPIDOPTERA: CRAMBIDAE)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The use of stable isotopes to investigate the effects of supplemental lysine and methionine on protein turnover and amino acid utilization in pacu, Piaractus mesopotamicus, juveniles

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Utilization of Ethyl Cyanoacrylate and 2-Octyl Cyanoacrylate Adhesives for Autogenous Bone Graft Fixation: Histomorphometric Study in Rats

The present study analyzes the repair process of autogenous bone graft in a block fixed with ethyl cyanoacrylate and 2-octyl cyanoacrylate adhesives in rat calvaria. Forty-eight rats, divided into 3 groups, received round osteotomies at the right parietal bone for the attainment of autogenous bone graft fragment, which was fixed at the opposite side to the donor site with ethyl cyanoacrylate (ethyl group) and 2-octyl cyanoacrylate (octyl group) adhesives. In the control group, bone fragment was only juxtaposed at the parietal bone surface without any fixation material. The animals were euthanized after 10 and 60 postoperative days. The calvariae were processed in a laboratory for the attainment of slides stained through the hematoxylin and eosin technique for histological and histometric analysis. The qualitative analysis showed a discrete inflammatory infiltrate in the control group and moderate inflammatory infiltrate in the ethyl and octyl groups at the 10-day period, which remained at the 60-day period, mainly in the octyl group. The bone fragment remained bonded to the recipient site through the adhesive, but graft incorporation was not observed in any of the specimens. Resorption was higher in the octyl group followed by the ethyl and control groups, both at the 10-and 60-day periods, but with no statistical significance (P < .05). Although promoting graft fixation and its maintenance at the recipient site, both studied adhesives did not allow the graft incorporation, producing a localized and discrete inflammatory reaction, which persisted at 60 days, being more intense in the octyl cyanoacrylate group.

Modelling energy utilization in poultry

Models of daily energy requirement can help to establish better and more profitable feeding programs for poultry. Studies have been conducted at UNESP-Jaboticabal-Brazil with the aim of studying energy utilization in broiler breeders, laying hens, and broilers, and to establish metabolisable energy requirement models. The factorial approach was used to partition the energy requirements into maintenance, growth, and production components. The resulting models consider body weight, weight gain, egg production, and environmental temperature for the determination of the energy requirements of poultry. These models were evaluated in performance trials and provided good estimates. Therefore, they can be used to establish nutritional programs. The aim of this chapter is to describe the development of these models and to outline the results of our studies at UNESP.

Análise da aplicabilidade da ferramenta FTA no estudo de falhas de manutenção em uma indústria

The competitiveness in the industrial sector is increasingly fierce. In this context, the quality of maintenance is often neglected due to the sense of urgency that arises in these companies. Thus, it becomes increasingly necessary to use tools of Reliability Centered Maintenance to assist in managing maintenance effectively and efficiently, and directing resources .This study aims to evaluate the use of the fault tree to identify critical paths in the maintenance sector in an industry. The proposal is uses the tools of Reliability Centered Maintenance (MCC) for the collection, disposal and prioritizing causes problems in the transport industry. The study has its focus on the theoretical foundation of problem solving methods and techniques to identify the root causes, using the fault tree

Evaluation of the pre-inoculum utilization in biosurfactant production by solid-state fermentation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sucrose utilization by Zymomonas mobilis: Levan production optimization using submerged fermentation

Levan is an extracellular polysaccharide (EPS), constituted by linked fructose units β (2,6), obtained by transfructosilation reaction during fermentation of microorganisms in a sucrose rich culture medium. The bacterial levan production is a good alternative of fructose source, besides having certain functional characteristics in the human body, such as a hypocholesterolemic and an anticarcinogenic agent. In the food industry, the levan can be used to fix colors and flavors, as well as to thickening and stabilizing agent in foods. This work aimed to analyze the kinetic parameters for levan production by Zymomonas mobilis CCT 4494, using submerged fermentation. The response surface methodology (RSM), was utilized to predict the optimization of medium for exopolymer production and the independent variables studied were: initial pH, incubation temperature, sucrose, KCl, K2SO4, MgSO4 and CaCl2. It was observed that the bacterium Z. mobilis CCT 4494 well adapted in medium containing high concentrations of sucrose.

Co-simulation tools for networked control systems: revision and utilization

Networked control systems (NCSs) are distributed control systems in which the sensors, actuators, and controllers are physically separated and connected through an industrial network. The main challenge related to the development of NCSs is the degenerative effects caused by the inclusion of this communication network in the closed loop control. In order to mitigate these effects, co-simulation tools for NCS have been developed to study the network influence in the NCS. This paper presents a revision about co-simulation tools for NCS and the application of two of these tools for the design and evaluation of NCSs. The TrueTime and Jitterbug tools were used together to evaluate the main configuration parameter that affects the performance of CAN-based NCS and to verify the NCS quality of control under various timing conditions including different transmission period of messages and network delays. Therefore, the simulation results led to the conclusion that despite the transmission period of messages is the most significant factor among the analyzed in the design of NCS, its influence is related to the kind of system with greater effects in NCSs with fast dynamics.

Service Utilization Patterns of Homeless Youth

Few studies exist on the types of characteristics associated with service utilization (e.g., shelters, food programs) among homeless youth in the U.S. Services are important, however, because without food and shelter, numerous homeless youth resort to trading sex in order to meet their daily survival needs. Access to physical and mental health services gives homeless youth more of an opportunity to integrate into mainstream society than they would otherwise have. To address this gap in our understanding, my study examines what traits (e.g. age, race, abuse history) correlate with the use of shelters, food programs, street outreach, counseling, STD/STI testing, and HIV testing among homeless youth. The Theory of Reasoned Action is used as an ideological framework in conjunction with theoretical constructs of risk, need, and prior service exposure. Data were obtained from the Social Network and Homeless Youth Project (SNHYP), a sample of 249 Midwestern homeless youth ages 14 to 21, which used trained interviewers to conduct structured interviews with youth. Respondents were interviewed in both shelters and on the street over a period of approximately one year. My findings revealed that homeless youth’s service usage varied across gender, sexual orientation, age, having recently held a job, and having ever been physically or sexually abused, in addition to other characteristics. Conversely, service use was not associated with social network size or subjective norms (i.e. attitudes of peers, such as acceptance of condom use) of youths’ social networks. By examining these areas, my study builds on previous research on homeless youth and lays the framework for future research on service utilization by homeless youth.