Tiller size/density compensation in grazed Tifton 85 bermudagrass swards

The objective of this study was to evaluate the occurrence of the tiller size/density compensation mechanism in Tifton 85 bermudagrass swards grazed by sheep under continuous stocking. Treatments corresponded to four sward steady state conditions (5, 10, 15, and 20 cm of sward surface height), maintained by sheep grazing. The experimental design was a complete randomized block with four replicates. Pasture responses evaluated include: tiller population density, tiller mass, leaf mass and leaf area per tiller, and herbage mass. Tiller volume, leaf area index, tiller leaf/stem ratio, and tiller leaf area/volume ratio were calculated and simple regression analyses between tiller population density and tiller mass were performed. Measurements were made in December, 1998, and January, April, and July, 1999. The swards showed a tiller size/density compensation mechanism in which high tiller population densities were associated with small tillers and vice-versa, except in July, 1999. Regression analyses revealed that linear coefficients were steeper than the theoretical expectation of -3/2. Increments in herbage mass were attributable to increases in tiller mass in December and January. Leaf area/volume ratio values of Tifton 85 tillers were much lower than those commonly found for temperate grass species.

Selecció dels paràmetres de fabricació per CN per obtenir acabats òptims mitjançant una eina CAM

L’ús dels sistemes CAD/CAM s’ha fet un lloc important a les indústries en què intervenen els processos de mecanització, ja que aquests softwares redueixen el temps per crear un programa de control numèric i permeten mecanitzar superfícies complicades de dues i tres dimensions. La introducció en el mercat d’aquests sistemes de fabricació assistida per ordinador ha fet que apareguessin un elevat nombre de paràmetres de control associats a cada un dels cicles de mecanització. L’elecció del cicle i dels paràmetres repercuteix també en el temps de tall, l’acabat superficial, la vida i el desgast de l’eina, i en el preu final de la peça entre d’altres. L’equip d’investigació del GREPP (Grup de Recerca en Enginyeria de Procés, Producte i Producció) va fer un estudi previ de diferents paràmetres, controlant quatre estratègies de mecanització i tres paràmetres de procés, del sistema CAM per tal d’obtenir el millor acabat superficial. L’objecte del projecte final de carrera és fer noves experimentacions de la investigació iniciada pel grup de recerca del GREPP, ampliant les geometries i algun factor de control per tal de tenir un major nombre de dades i així, poder saber el comportament que tenen aquests factors en el temps de tall i la rugositat superficial

Practical considerations for improving the productivity of mass spectrometry-based proteomics.

Mass spectrometry (MS) is currently the most sensitive and selective analytical technique for routine peptide and protein structure analysis. Top-down proteomics is based on tandem mass spectrometry (MS/ MS) of intact proteins, where multiply charged precursor ions are fragmented in the gas phase, typically by electron transfer or electron capture dissociation, to yield sequence-specific fragment ions. This approach is primarily used for the study of protein isoforms, including localization of post-translational modifications and identification of splice variants. Bottom-up proteomics is utilized for routine high-throughput protein identification and quantitation from complex biological samples. The proteins are first enzymatically digested into small (usually less than ca. 3 kDa) peptides, these are identified by MS or MS/MS, usually employing collisional activation techniques. To overcome the limitations of these approaches while combining their benefits, middle-down proteomics has recently emerged. Here, the proteins are digested into long (3-15 kDa) peptides via restricted proteolysis followed by the MS/MS analysis of the obtained digest. With advancements of high-resolution MS and allied techniques, routine implementation of the middle-down approach has been made possible. Herein, we present the liquid chromatography (LC)-MS/MS-based experimental design of our middle-down proteomic workflow coupled with post-LC supercharging.

Toll-like receptor 3 expressed by melanoma cells as a target for therapy?

PURPOSE: The immunomodulatory properties of Toll-like receptors (TLR) agonists have inspired their use as experimental adjuvants for vaccination of cancer patients. However, it is now well recognized that TLR expression is not restricted to immune cells but can also be found in many cell types, including those giving rise to tumors. It is therefore mandatory to explore the potential effects of TLR triggering directly on tumor cells. EXPERIMENTAL DESIGN: In the present work, we have investigated TLR3 protein expression in melanoma cell lines derived from patients, and analyzed the effects of TLR3 agonists on tumor cell survival. Moreover, we used RNA interference to stably knock down TLR3 expression and study the involvement of this receptor in dsRNA-induced effects on melanoma cells viability. RESULTS: Human melanoma cells can express functional TLR3 protein. Interestingly, the engagement of the receptor by TLR3 agonists can directly inhibit cell proliferation and induce tumor cell death when combined to treatment with either type I IFN or protein synthesis inhibitors. These effects were shown by RNA interference to be largely dependent on TLR3. Moreover, TLR3-mediated cell death involves the activation of caspases and engages both extrinsic and intrinsic apoptotic pathways. CONCLUSION: TLR3 protein can be expressed in human melanoma cells, where it can deliver proapoptotic and antiproliferative signaling. Altogether, these results suggest that TLR3 agonists represent very promising adjuvants for cancer vaccines not only based on their well-described immunostimulatory properties, but also due to their newly identified cytostatic and cytotoxic effects directly on tumor cells.

HLA class I - associated immunodominance affects CTL responsiveness to an ESO recombinant protein tumor antigen vaccine.

PURPOSE: Vaccination with full-length human tumor antigens aims at inducing or increasing antitumor immune responses, including CD8 CTL in cancer patients across the HLA barrier. We have recently reported that vaccination with a recombinant tumor-specific NY-ESO-1 (ESO) protein, administered with Montanide and CpG resulted in the induction of specific integrated antibody and CD4 T cell responses in all vaccinated patients examined, and significant CTL responses in half of them. Vaccine-induced CTL mostly recognized a single immunodominant region (ESO 81-110). The purpose of the present study was to identify genetic factor(s) distinguishing CTL responders from nonresponders. EXPERIMENTAL DESIGN: We determined the HLA class I alleles expressed by CTL responders and nonresponders using high-resolution molecular typing. Using short overlapping peptides spanning the ESO immunodominant CTL region and HLA class I/ESO peptide tetramers, we determined the epitopes recognized by the majority of vaccine-induced CTL. RESULTS: CTL induced by vaccination with ESO protein mostly recognized distinct but closely overlapping epitopes restricted by a few frequently expressed HLA-B35 and HLA-Cw3 alleles. All CTL responders expressed at least one of the identified alleles, whereas none of the nonresponders expressed them. CONCLUSIONS: Expression of HLA-B35 and HLA-Cw3 is associated with the induction of immunodominant CTL responses following vaccination with recombinant ESO protein. Because recombinant tumor-specific proteins are presently among the most promising candidate anticancer vaccines, our findings indicate that the monitoring of cancer vaccine trials should systematically include the assessment of HLA association with responsiveness.

Mycorrhizal dependency of mangaba tree under increasing phosphorus levels

The objective of this study was to evaluate the mycorrhizal dependency of mangaba tree (Hancornia speciosa) plantlets, under increasing levels of phosphorus fertilization. The experimental design was completely randomized in a 4×5 factorial arrangement with three mycorrhizal fungi inocula - Gigaspora margarita, Glomus etunicatum, or a pool of native mycorrhizal fungi (Acaulospora longula, Glomus clarum, Gigaspora albida, Paraglomus sp.) -, and a nonmycorrhizal control, in combination with five levels of phosphorus applied to the substrate: 0, 25, 50, 75, and 100 mg kg-1. After 180 days of growth, plantlets with inoculation of native mycorrhizal pool produced more shoot and root dry biomass and had higher shoot phosphorus content and accumulation. The noninoculated control showed the lowest values, independently of the phosphorus level. The highest relative mycorrhizal dependency occurred with the inoculation of native mycorrhizal fungi. Plants with mycorrhizal fungi did not respond to phosphorus addition above 50 mg kg-1. Mangaba tree is highly dependent on mycorrhiza, but the degree of dependency varies according to phosphorus levels and fungal inocula. In general, mangaba tree is more responsive to mycorrhizal fungi inoculation than to phosphorus addition.

Soybean cultivar BR-16-AHAS tolerance to the herbicide imazapyr

The objective of this work was to evaluate the effect of the transgenic soybean BR-16-AHAS genetic constitution on the tolerance to the herbicide imazapyr. BR-16-AHAS was crossed with ten other genotypes. The experimental design was a complete randomized block, in a 2x12x3 factorial arrangement, with two sowing periods (winter and summer), twelve crossing groups and three plant positions (upper, mid and lower), with three replicates. The plants were treated with 100 g ha-1 a.i. of imazapyr at the V3/V4 stage. For each position of the plant (upper, mid and lower), the following variables were assessed: number of pods, number of seeds, seed weight, number of seeds per pod and the 100 seeds weight. The effect of the herbicide varied according to the more affected plant position (upper, mid and lower) of each genotype. The use of the same gene ahas of BR-16-AHAS, in various genotypes, results in materials with good tolerance to imazapyr; tolerance levels depend not only on the ahas gene, but also on the presence of other genes.

French Swiss physicians' attitude toward palliative sedation: Influence of prognosis and type of suffering.

OBJECTIVE: Palliative sedation is a last resort medical act aimed at relieving intolerable suffering induced by intractable symptoms in patients at the end-of-life. This act is generally accepted as being medically indicated under certain circumstances. A controversy remains in the literature as to its ethical validity. There is a certain vagueness in the literature regarding the legitimacy of palliative sedation in cases of non-physical refractory symptoms, especially "existential suffering." This pilot study aims to measure the influence of two independent variables (short/long prognosis and physical/existential suffering) on the physicians' attitudes toward palliative sedation (dependent variable). METHODS: We used a 2 × 2 experimental design as described by Blondeau et al. Four clinical vignettes were developed (vignette 1: short prognosis/existential suffering; vignette 2: long prognosis/existential suffering; vignette 3: short prognosis/physical suffering; vignette 4: long prognosis/physical suffering). Each vignette presented a terminally ill patient with a summary description of his physical and psychological condition, medication, and family situation. The respondents' attitude towards sedation was assessed with a six-point Likert scale. A total of 240 vignettes were sent to selected Swiss physicians. RESULTS: 74 vignettes were completed (36%). The means scores for attitudes were 2.62 ± 2.06 (v1), 1.88 ± 1.54 (v2), 4.54 ± 1.67 (v3), and 4.75 ± 1.71 (v4). General linear model analyses indicated that only the type of suffering had a significant impact on the attitude towards sedation (F = 33.92, df = 1, p = 0.000). Significance of the results: The French Swiss physicians' attitude toward palliative sedation is more favorable in case of physical suffering than in existential suffering. These results are in line with those found in the study of Blondeau et al. with Canadian physicians and will be discussed in light of the arguments given by physicians to explain their decisions.

Phase I safety and pharmacodynamic of inecalcitol, a novel VDR agonist with docetaxel in metastatic castration-resistant prostate cancer patients.

PURPOSE: We conducted a phase I multicenter trial in naïve metastatic castrate-resistant prostate cancer patients with escalating inecalcitol dosages, combined with docetaxel-based chemotherapy. Inecalcitol is a novel vitamin D receptor agonist with higher antiproliferative effects and a 100-fold lower hypercalcemic activity than calcitriol. EXPERIMENTAL DESIGN: Safety and efficacy were evaluated in groups of three to six patients receiving inecalcitol during a 21-day cycle in combination with docetaxel (75 mg/m2 every 3 weeks) and oral prednisone (5 mg twice a day) up to six cycles. Primary endpoint was dose-limiting toxicity (DLT) defined as grade 3 hypercalcemia within the first cycle. Efficacy endpoint was ≥30% PSA decline within 3 months. RESULTS: Eight dose levels (40-8,000 μg) were evaluated in 54 patients. DLT occurred in two of four patients receiving 8,000 μg/day after one and two weeks of inecalcitol. Calcemia normalized a few days after interruption of inecalcitol. Two other patients reached grade 2, and the dose level was reduced to 4,000 μg. After dose reduction, calcemia remained within normal range and grade 1 hypercalcemia. The maximum tolerated dose was 4,000 μg daily. Respectively, 85% and 76% of the patients had ≥30% PSA decline within 3 months and ≥50% PSA decline at any time during the study. Median time to PSA progression was 169 days. CONCLUSION: High antiproliferative daily inecalcitol dose has been safely used in combination with docetaxel and shows encouraging PSA response (≥30% PSA response: 85%; ≥50% PSA response: 76%). A randomized phase II study is planned.

Developing an Effective Construction Training Program for Hispanic and American Supervisors and Craft Workers, 2007

Hispanics are a large and growing part of the United States workforce. Projections of the U.S. Census Bureau (2001) state that, by the year 2050, Hispanics will account for 25% of the population. For the Midwest in particular, the Hispanic population is expected to increase 35% by the year 2025. The construction industry is expected to experience a greater percentage increase of its Hispanic population, due to the labor-intensive nature of the industry. This study addresses the expected increase of Hispanic workers in the construction industry by testing the best approaches for delivering training to construction crews with Hispanic workers as well as American supervisors and laborers in the state of Iowa. The research methodology consisted of assessing the effects on communication, safety, work environment, and productivity as a result of the integration training. Results show that integration on-site training decreases workers’ desire to move and increases quality of work and productivity. Most importantly, experimental design was used to show the increasing levels of direct construction communication due to the Toolbox Integration Course for Hispanic Workers and American Supervisors (TICHA) designed as part of this project. This study recommends the creation of a quasi-governmental or association program that can offer continuous research and training that can benefit the construction industry as well as society as a whole. The industry involvement in this process is crucial for contractors. Not only do contractors benefit from reduced insurance premiums when workers act safely, but workers with better communication skills are more productive.

Polymers as carriers for rhizobial inoculant formulations

The aim of this work was to evaluate the efficiency of carboxymethyl cellulose (CMC) and starch blends as carrier materials of rhizobial inoculants regarding their capacity to maintain viable cells and promote cowpea (Vigna unguiculata) nodulation. The experimental design adopted was completely randomized, with three replicates. Forty different compositions of carboxymethyl cellulose (CMC) with starch, compatibilized or not with different proportions of MgO or ZnO, were evaluated regarding their ability of maintaining rhizobial viable cells during the storage period of one month at room temperature, in an initial screening. Thereafter, selected inoculant carrier blends were evaluated regarding their ability to maintain viable rhizobial cells for a period of 165 days, and their performance as inoculant carriers was compared to a peat-based inoculant carrier under greenhouse conditions. Rhizobial cells were better maintained in blends containing 50-60% CMC. Compatibilizing agents did not increase survival of rhizobial cells for 30 days of storage. The cowpea nodulation of polymer blends was statistically the same of peat-based inoculants. CMC/starch polymer blends are efficient carriers to rhizobial inoculants for up to 165 days of storage, when compatibilized with MgO (1%).

Single nucleotide polymorphisms, apoptosis, and the development of severe late adverse effects after radiotherapy.

PURPOSE: Evidence has accumulated in recent years suggestive of a genetic basis for a susceptibility to the development of radiation injury after cancer radiotherapy. The purpose of this study was to assess whether patients with severe radiation-induced sequelae (RIS; i.e., National Cancer Institute/CTCv3.0 grade, > or =3) display both a low capacity of radiation-induced CD8 lymphocyte apoptosis (RILA) in vitro and possess certain single nucleotide polymorphisms (SNP) located in candidate genes associated with the response of cells to radiation. EXPERIMENTAL DESIGN: DNA was isolated from blood samples obtained from patients (n = 399) included in the Swiss prospective study evaluating the predictive effect of in vitro RILA and RIS. SNPs in the ATM, SOD2, XRCC1, XRCC3, TGFB1, and RAD21 genes were screened in patients who experienced severe RIS (group A, n = 16) and control subjects who did not manifest any evidence of RIS (group B, n = 18). RESULTS: Overall, 13 and 21 patients were found to possess a total of <4 and > or =4 SNPs in the candidate genes. The median (range) RILA in group A was 9.4% (5.3-16.5) and 94% (95% confidence interval, 70-100) of the patients (15 of 16) had > or =4 SNPs. In group B, median (range) RILA was 25.7% (20.2-43.2) and 33% (95% confidence interval, 13-59) of patients (6 of 18) had > or =4 SNPs (P < 0.001). CONCLUSIONS: The results of this study suggest that patients with severe RIS possess 4 or more SNPs in candidate genes and low radiation-induced CD8 lymphocyte apoptosis in vitro.

Raman analysis of multilayer automotive paints in forensic science: measurement variability and depth profile?

The aim of this work is to study the influence of several analytical parameters on the variability of Raman spectra of paint samples. In the present study, microtome thin section and direct (no preparation) analysis are considered as sample preparation. In order to evaluate their influence on the measures, an experimental design such as 'fractional full factorial' with seven factors (including the sampling process) is applied, for a total of 32 experiments representing 160 measures. Once the influence of sample preparation highlighted, a depth profile of a paint sample is carried out by changing the focusing plane in order to measure the colored layer under a clearcoat. This is undertaken in order to avoid sample preparation such a microtome sectioning. Finally, chemometric treatments such as principal component analysis are applied to the resulting spectra. The findings of this study indicate the importance of sample preparation, or more specifically, the surface roughness, on the variability of the measurements on a same sample. Moreover, the depth profile experiment highlights the influence of the refractive index of the upper layer (clearcoat) when measuring through a transparent layer.

Adaptation of anthurium cultivars as cut flowers in a subtropical area

The objective of this work was to evaluate the adaptation of anthurium (Anthurium andraeanum) cultivars as cut flowers in a subtropical area, located in north of Paraná State, Brazil. The Apalai, Ianomami, Kinã, nK 102, Parakanã, Rubi, and Terena cultivars were cultivated in a nursery under 80% shade. The number of leaves and inflorescences, floral stem length, length and width of inflorescences, and spadix length were evaluated. The experimental design was in completely randomized blocks, with six replicates and five plants per plot. During the 18 months evaluated, 'Parakanã' produced 11 inflorescences per plant, whereas the other cultivars produced seven to nine inflorescences per plant. The number of leaves produced per plant was: 'Ianomami', 25; 'Parakanã', 20; 'Apalai' and 'Terena', 15; 'Kinã' and 'Rubi', 11; and 'nK 102', 9. The Apalai, nK 102, Parakanã, and Rubi cultivars are the most recommended as cut flowers; the Ianomami cultivar is not recommended as a cut flower in this region.

Cover plants with potential use for crop-livestock integrated systems in the Cerrado region

The objective of this work was to evaluate the effects of lignin, hemicellulose, and cellulose concentrations in the decomposition process of cover plant residues with potential use in no-tillage with corn, for crop-livestock integrated system, in the Cerrado region. The experiment was carried out at Embrapa Cerrados, in Planaltina, DF, Brazil in a split plot experimental design. The plots were represented by the plant species and the subplots by harvesting times, with three replicates. The cover plants Urochloa ruziziensis, Canavalia brasiliensis, Cajanus cajan, Pennisetum glaucum, Mucuna aterrima, Raphanus sativus, Sorghum bicolor were evaluated together with spontaneous plants in the fallow. Cover plants with lower lignin concentrations and, consequently, higher residue decomposition such as C. brasiliensis and U. ruziziensis promoted higher corn yield. High concentrations of lignin inhibit plant residue decomposition and this is favorable for the soil cover. Lower concentrations of lignin result in accelerated plant decomposition, more efficient nutrient cycling, and higher corn yield.