Standardized electrical tests for electrical equipment in road vehicles Case: Visedo Oy PowerMASTER M-frame

Electrical road vehicles were common at the begin of the 20th century but internal combustion engines took a victory from electrical motors in road vehicles. The acknowledgement of the environment, and the price and the availability of the crude oil are reasons for the comeback of the electrical vehicles. Advancement in industrial technology and political atmosphere in EU as the directive 20--20--20, which consists of reducing fossil emission, increasing renewable energy and increasing the energy efficiency, have made the electrification popular again. In this thesis tests based on standard ISO 16750--2 electrical loads for electrical equipment in road vehicles are made for Visedo Oy's PowerMASTER M-frame power electronics device. This device is designed for mainly drive trains in mobile work machines and marine vessels but can be used in other application in its power range which also includes road vehicles. The functionality of the device is tested with preliminary tests which act as a framework for the tests based on standards.

Design and Material Selection of High-Speed Rotating Electrical Machines

The increasing emphasis on energy efficiency is starting to yield results in the reduction in greenhouse gas emissions; however, the effort is still far from sufficient. Therefore, new technical solutions that will enhance the efficiency of power generation systems are required to maintain the sustainable growth rate, without spoiling the environment. A reduction in greenhouse gas emissions is only possible with new low-carbon technologies, which enable high efficiencies. The role of the rotating electrical machine development is significant in the reduction of global emissions. A high proportion of the produced and consumed electrical energy is related to electrical machines. One of the technical solutions that enables high system efficiency on both the energy production and consumption sides is high-speed electrical machines. This type of electrical machines has a high system overall efficiency, a small footprint, and a high power density compared with conventional machines. Therefore, high-speed electrical machines are favoured by the manufacturers producing, for example, microturbines, compressors, gas compression applications, and air blowers. High-speed machine technology is challenging from the design point of view, and a lot of research is in progress both in academia and industry regarding the solution development. The solid technical basis is of importance in order to make an impact in the industry considering the climate change. This work describes the multidisciplinary design principles and material development in high-speed electrical machines. First, high-speed permanent magnet synchronous machines with six slots, two poles, and tooth-coil windings are discussed in this doctoral dissertation. These machines have unique features, which help in solving rotordynamic problems and reducing the manufacturing costs. Second, the materials for the high-speed machines are discussed in this work. The materials are among the key limiting factors in electrical machines, and to overcome this limit, an in-depth analysis of the material properties and behavior is required. Moreover, high-speed machines are sometimes operating in a harsh environment because they need to be as close as possible to the rotating tool and fully exploit their advantages. This sets extra requirements for the materials applied.

Electrical properties of some single crystal dodecaborides /|nby Jyoti Burte. -- 260 St. Catharines [Ont. : s. n.],

PreVi011.3 ':i or~ : indicat e('. tk~t ho t~)rE's sed ~-Al B 12 1i~2, ~' a semiconductor. r:Toreove r , the s i mpl.(~ electronic t heory also indi cates that ~ -AIB1 2 should be a semico nductor, since thf're is one nonbonding e 'Le ctrofl per AlB12- uni t. JPor these reasons, we decided to measure t he electrical n ropert i ~ s of ~ -AlB1 2 single crystal s . Singl e crystal s of¥- AIB 12 ab ou t 1 x 1 r1n1 . size were grown from a copper mel t at 12500 C. The melt technique coupled. 1,vi th slow cooling vilas used because of i ts advantages such as : siTYInle set- up of the expe rimon t ; only e ;l.sil y available c hemi cals are required and it i s a c omparatively strair::bt forvvard y,le t hod still yielding crystal s big enouGh for OtU' purpose . Copper rms used as a solvent , i nst8ad of previOl.wly used aluminum , because it allows c.l.'ystal growth at hig he r t emneratures. HovlGver, the cry s tals of ] -AlB12 shm'red very hi gh res i s t ance a t r oom temperature . From our neasureJ'lents we conclude that the r esistivity of j3- Al B12 is, at least, given as ~ = 4. x 107 oblD .em •• Those results are inc ons i s t ent wi 'uh the ones .. reported by IIiss Khin fo r bot- pressed j3-AlB12 g i ven a s = 7600 ohm . em . or I e s s . ' Since tbe hot pressing was done at about 800 - ' 9000C i n ~ rap hi te moul ds 1,7i th 97% AlB12- p oVJder, vie thi nk there is pas s ib i 1 i ty th a.t lower borides or borot] carbide are , being formed, ':.Jhich are k11 own to be good semiconductors . v7e tried to ro-pe r-AlB12 by addi'J,'?: agents s uch as l:Ig , IG.-InO 4. ' HgS04 , KI12PO 4·' etc. to t he melt .. However , all these re age 11 t eel either reduced the yield and size of t lJe crystals or r;ave crystals of high r esis'can ce again. We think tba t molten copper keeps t he i mpurities off . There is also a pos s i bil i ty t hc:!,t these doping agents get oxidi~::;ed at '1 250°C • Hence, we co ~ clud e that J -AIB12 has v~ ry high r es i stance at r oom temperature . This was a l s o C011 - fi rmed by checki ng the siYlgle and. polycrystals of .~-AIB12 from Norton Co., Ontario and Cooper Nletallurgical Association. Boron carbide has been reported to be a semiconductor with ~ - 0.3 to 0.8 ohm . cm. for hotpres sed s araples. Boron carbide b e inq: struct urally related to ¥-AIB12 , we de cided to study the electrical prone rties of it~ Single crystals. These crystals were cut from a Single melt grovvn crystal a t Norton Co., Ontario. The resistivity of th," se crystal s was measured by the Van der Pam-v' s ~ nethod, which \vas very c onvenient fo r our crystal sha-pp.s. Some of the crystals showed resistivity ~ == 0.50 ob,Tn.cr] . i n agreement with the previously reported results . However , a few crystals showed lower resistivity e.g . 0 .13 and 0.20 ohm.cra • • The Hall mobility could .not be measured and th8reiore i s lower than 0 .16 em 2 v - 1 sec -1 • This is in agreement \vith t he re1)orted Hall mobility for pyrolytic boron . _ 2 -1 -1 carbide as 0.13 cm v sec • We also studied the orientation of the boron carbide crystals by the Jjaue-method. The inclination of c-axis with res pect to x-ray be81Il was det ermined . This was found to be 100 t o 20° f or normal resistivity sarnples (0.5 ohm . cm.) and 27 - 30° for t he lower r esistivity samples (0.1 ~5 to 0.20 ohm.cm .). This indica tes the possibility that th.e r es if.1tivity of B13C3 i s orientation dependent.

Some electrical properties of semi-conductor crystals / |nPhyu Phyu Khin. -- 260 St. Catharines, Ont. : [s. n.],

SiC and AtB 12 have been prepared and their resistivities and Hall voltages measured. The resistivities and Hall voltages were measured by the Van der Pauw's method, using spring loaded tungsten contacts. In this method, the major requirement is to have samples of plane parallel surfaces of arbitrary shape with four small contacts at the circumference. Similar measurements were made with a number of SiC crystals obtained from the Norton Research Corporation (Canada)-Ltd., Carolina Aluminum Co., Exolon Co. and Carborundum Co. It was found that resistivity, carrier concentration and mobility of ions depend on the type of impurity. AtB 12 was prepared from the melt containing At and B in the ratio of 4:1. They formed amber-colour pseudo tetragonal crystals. As the crystals obtained were small for electrical measurements, hot pressed lumps have been used to measure their resistivity.

The effects of moisture, cation concentration, temperature, density and composition of soils on their electrical resistivity

The effects. of moisture, cation concentration, dens ity , temper~ t ure and grai n si ze on the electrical resistivity of so il s are examined using laboratory prepared soils. An i nexpen si ve method for preparing soils of different compositions was developed by mixing various size fractions i n the laboratory. Moisture and cation c oncentration are related to soil resistivity by powe r functions, whereas soil resistiv ity and temperature, density, Yo gravel, sand , sil t, and clay are related by exponential functions . A total of 1066 cases (8528 data) from all the experiments were used in a step-wise multiple linear r egression to determine the effect of each variable on soil resistivity. Six variables out of the eight variables studied account for 92.57/. of the total variance in so il resistivity with a correlation coefficient of 0.96. The other two variables (silt and gravel) did not increase the · variance. Moisture content was found to be - the most important Yo clay. variable- affecting s oil res istivi ty followed by These two variables account for 90.81Yo of the total variance in soil resistivity with a correlation ~oefficient ·.of 0 . 95. Based on these results an equation to ' ~~ed{ ct soil r esist ivi ty using moisture and Yo clay is developed . To t est the predicted equation, resistivity measurements were made on natural soils both in s i tu a nd i n the laboratory. The data show that field and laboratory measurements are comparable. The predicted regression line c losely coinciqes with resistivity data from area A and area B soils ~clayey and silty~clayey sands). Resistivity data and the predicted regression line in the case of c layey soils (clays> 40%) do not coincide, especially a t l ess than 15% moisture. The regression equation overestimates the resistivity of so i l s from area C and underestimates for area D soils. Laboratory prepared high clay soils give similar trends. The deviations are probably caused by heterogeneous distribution of mo i sture and difference in the type o f cl ays present in these soils.

Collective Labour Agreement between the Public Utilities Commission of the City of St. Catharines and Local 556, The International Brotherhood of Electrical Workers, 1952

In 1952, Local 556 of The International Brotherhood of Electrical Workers negotiated a contract with The Public Utilities Commission of the City of St. Catharines. The contract was to be in effect from July 1952 to September 1953. The document is unsigned.

Electrical Development Company of Ontario certificate of stock ownership, ca. 1910.

The Electrical Development Company of Ontario was created in 1903. It was one of three private power companies that had water power leases with the Niagara Parks Commission, but was the only one that was financed with Canadian capital. The company built the Toronto Power Generating Station at Niagara Falls beginning in 1906, and the power house was completed in 1913. During the construction, there was much debate about whether the utility should remain privately operated or become a public utility. In 1920, the company became part of the public utility.

Crystallinity, Magnetic and Electrical Properties of Bi doped LaVO3

We report the results of crystal structure, magnetization and resistivity measurements of Bi doped LaVO3. X-ray diffraction (XRD) shows that if doping Bi in the La site is less than ten percent, the crystal structure of La1-xBixVO3 remains unchanged and its symmetry is orthorhombic. However, for higher Bi doping (>10%) composite compounds are found where the XRD patterns are characterized by two phases: LaVO3+V2O3. Energy-dispersive analysis of the x-ray spectroscopy (EDAX) results are used to find a proper atomic percentage of all samples. The temperature dependence of the mass magnetization of pure and single phase doped samples have transition temperatures from paramagnetic to antiferromagnetic region at TN=140 K. This measurement for bi-phasic samples indicates two transition temperatures, at TN=140 K (LaVO3) and TN=170 K (V2O3). The temperature dependence of resistivity reveals semiconducting behavior for all samples. Activation energy values for pure and doped samples are extracted by fitting resistivity versus temperature data in the framework of thermal activation process.

Dynamic Performance Evaluation of Canadian Fixed-Income Funds using Markov Regime Switching Models

This thesis examines the performance of Canadian fixed-income mutual funds in the context of an unobservable market factor that affects mutual fund returns. We use various selection and timing models augmented with univariate and multivariate regime-switching structures. These models assume a joint distribution of an unobservable latent variable and fund returns. The fund sample comprises six Canadian value-weighted portfolios with different investing objectives from 1980 to 2011. These are the Canadian fixed-income funds, the Canadian inflation protected fixed-income funds, the Canadian long-term fixed-income funds, the Canadian money market funds, the Canadian short-term fixed-income funds and the high yield fixed-income funds. We find strong evidence that more than one state variable is necessary to explain the dynamics of the returns on Canadian fixed-income funds. For instance, Canadian fixed-income funds clearly show that there are two regimes that can be identified with a turning point during the mid-eighties. This structural break corresponds to an increase in the Canadian bond index from its low values in the early 1980s to its current high values. Other fixed-income funds results show latent state variables that mimic the behaviour of the general economic activity. Generally, we report that Canadian bond fund alphas are negative. In other words, fund managers do not add value through their selection abilities. We find evidence that Canadian fixed-income fund portfolio managers are successful market timers who shift portfolio weights between risky and riskless financial assets according to expected market conditions. Conversely, Canadian inflation protected funds, Canadian long-term fixed-income funds and Canadian money market funds have no market timing ability. We conclude that these managers generally do not have positive performance by actively managing their portfolios. We also report that the Canadian fixed-income fund portfolios perform asymmetrically under different economic regimes. In particular, these portfolio managers demonstrate poorer selection skills during recessions. Finally, we demonstrate that the multivariate regime-switching model is superior to univariate models given the dynamic market conditions and the correlation between fund portfolios.

The effect of perturbation warning on attention switching abilities during dual-task performance in young and older adults

This study examined whether providing an auditory warning would facilitate attention switching abilities in older adults during dual-tasking. Fifteen young and 16 older adults performed a tracking task while recovering their balance from a support surface translation. For half of the trials, an auditory warning was presented to inform participants of the upcoming translation. Performance was quantified through electromyographic (EMG) recordings of the lower limb muscles, while the ability to switch attention between tasks was determined by tracking task error. Providing warning of an upcoming loss of balance resulted in both young and older adults increasing their leg EMG activity by 10-165% (p<0.05) in preparation for the upcoming translation. However, no differences in the timing of attention switching were observed with or without the warning (p=0.424). Together, these findings suggest that providing a perturbation warning has minimal benefits in improving attention switching abilities for balance recovery in healthy older adults.

Bounding of switching activity in logic circuits

Thèse diffusée initialement dans le cadre d'un projet pilote des Presses de l'Université de Montréal/Centre d'édition numérique UdeM (1997-2008) avec l'autorisation de l'auteur.

Code-Switching Between Cultures And Languages : Creative connectivity

Problème: Ma thèse porte sur l’identité individuelle comme interrogation sur les enjeux personnels et sur ce qui constitue l’identification hybride à l’intérieur des notions concurrentielles en ce qui a trait à l’authenticité. Plus précisément, j’aborde le concept des identifications hybrides en tant que zones intermédiaires pour ce qui est de l’alternance de codes linguistiques et comme négociation des espaces continuels dans leur mouvement entre les cultures et les langues. Une telle négociation engendre des tensions et/ou apporte le lien créatif. Les tensions sont inhérentes à n’importe quelle construction d’identité où les lignes qui définissent des personnes ne sont pas spécifiques à une culture ou à une langue, où des notions de l’identité pure sont contestées et des codes communs de l’appartenance sont compromis. Le lien créatif se produit dans les exemples où l’alternance de code linguistique ou la négociation des espaces produit le mouvement ouvert et fluide entre les codes de concurrence des références et les différences à travers les discriminations raciales, la sexualité, la culture et la langue. Les travaux que j’ai sélectionnés représentent une section transversale de quelques auteurs migrants provenant de la minorité en Amérique du Nord qui alternent les codes linguistiques de cette manière. Les travaux détaillent le temps et l’espace dans leur traitement de l’identité et dans la façon dont ils cernent l’hybridité dans les textes suivants : The Woman Warrior de Maxine Hong Kingston (1975-76), Hunger of Memory de Richard Rodriguez (1982), Comment faire l’amour avec un nègre sans se fatiguer de Dany Laferrière (1985), Borderlands/La Frontera de Gloria Anzalduá (1987), Lost in Translation de Eva Hoffman (1989), Avril ou l’anti-passion de Antonio D’Alfonso (1990) et Chorus of Mushrooms de Hiromi Goto (1994). Enjeux/Questions La notion de l’identification hybride est provocante comme sujet. Elle met en question l’identité pure. C’est un sujet qui a suscité beaucoup de discussions tant en ce qui a trait à la littérature, à la politique, à la société, à la linguistique, aux communications, qu’au sein même des cercles philosophiques. Ce sujet est compliqué parce qu’il secoue la base des espaces fixes et structurés de l’identité dans sa signification culturelle et linguistique. Par exemple, la notion de patrie n’a pas les représentations exclusives du pays d’origine ou du pays d’accueil. De même, les notions de race, d’appartenance ethnique, et d’espaces sexuels sont parfois négativement acceptées si elles proviennent des codes socialement admis et normalisés de l’extérieur. De tels codes de la signification sont souvent définis par l’étiquette d’identification hétérosexuelle et blanche. Dans l’environnement généralisé d’aujourd’hui, plus que jamais, une personne doit négocier qui elle est, au sens de son appartenance à soi, en tant qu’individu et ce, face aux modèles locaux, régionaux, nationaux, voire même globaux de la subjectivité. Nous pouvons interpréter ce mouvement comme une série de couches superposées de la signification. Quand nous rencontrons une personne pour la première fois, nous ne voyons que la couche supérieure. D’ailleurs, son soi intérieur est caché par de nombreuses couches superposées (voir Joseph D. Straubhaar). Toutefois, sous cette couche supérieure, on retrouve beaucoup d’autres couches et tout comme pour un oignon, on doit les enlever une par une pour que l’individualité complète d’une personne soit révélée et comprise. Le noyau d’une personne représente un point de départ crucial pour opposer qui elle était à la façon dont elle se transforme sans cesse. Sa base, ou son noyau, dépend du moment, et comprend, mais ne s’y limite pas, ses origines, son environnement et ses expériences d’enfance, son éducation, sa notion de famille, et ses amitiés. De plus, les notions d’amour-propre et d’amour pour les autres, d’altruisme, sont aussi des points importants. Il y a une relation réciproque entre le soi et l’autre qui établit notre degré d’estime de soi. En raison de la mondialisation, notre façon de comprendre la culture, en fait, comment on consomme et définit la culture, devient rapidement un phénomène de déplacement. À l’intérieur de cette arène de culture généralisée, la façon dont les personnes sont à l’origine chinoises, mexicaines, italiennes, ou autres, et poursuivent leur évolution culturelle, se définit plus aussi facilement qu’avant. Approche Ainsi, ma thèse explore la subjectivité hybride comme position des tensions et/ou des relations créatrices entre les cultures et les langues. Quoique je ne souhaite aucunement simplifier ni le processus, ni les questions de l’auto-identification, il m’apparaît que la subjectivité hybride est aujourd’hui une réalité croissante dans l’arène généralisée de la culture. Ce processus d’échange est particulièrement complexe chez les populations migrantes en conflit avec leur désir de s’intégrer dans les nouveaux espaces adoptés, c’est-à-dire leur pays d’accueil. Ce réel désir d’appartenance peut entrer en conflit avec celui de garder les espaces originels de la culture définie par son pays d’origine. Ainsi, les références antérieures de l’identification d’une personne, les fondements de son individualité, son noyau, peuvent toujours ne pas correspondre à, ou bien fonctionner harmonieusement avec, les références extérieures et les couches d’identification changeantes, celles qu’elle s’approprie du pays d’accueil. Puisque nos politiques, nos religions et nos établissements d’enseignement proviennent des représentations nationales de la culture et de la communauté, le processus d’identification et la création de son individualité extérieure sont formées par le contact avec ces établissements. La façon dont une personne va chercher l’identification entre les espaces personnels et les espaces publics détermine ainsi le degré de conflit et/ou de lien créatif éprouvé entre les modes et les codes des espaces culturels et linguistiques. Par conséquent, l’identification des populations migrantes suggère que la « community and culture will represent both a hybridization of home and host cultures » (Straubhaar 27). Il y a beaucoup d’écrits au sujet de l’hybridité et des questions de l’identité et de la patrie, toutefois cette thèse aborde la valeur créative de l’alternance de codes culturels et linguistiques. Ce que la littérature indiquera Par conséquent, la plate-forme à partir de laquelle j’explore mon sujet de l’hybridité flotte entre l’interprétation postcoloniale de Homi Bhabha concernant le troisième espace hybride; le modèle d’hétéroglossie de Mikhail Bakhtine qui englobent plusieurs de mes exemples; la représentation de Roland Barthes sur l’identité comme espace transgressif qui est un modèle de référence et la contribution de Chantal Zabus sur le palimpseste et l’alternance de codes africains. J’utilise aussi le modèle de Sherry Simon portant sur l’espace urbain hybride de Montréal qui établit un lien important avec la valeur des échanges culturels et linguistiques, et les analyses de Janet Paterson. En effet, la façon dont elle traite la figure de l’Autre dans les modèles littéraires au Québec fournisse un aperçu régional et national de l’identification hybride. Enfin, l’exploration du bilinguisme de Doris Sommer comme espace esthétique et même humoristique d’identification situe l’hybridité dans une espace de rencontre créative. Conséquence Mon approche dans cette thèse ne prétend pas résoudre les problèmes qui peuvent résulter des plates-formes de la subjectivité hybride. Pour cette raison, j’évite d’aborder toute approche politique ou nationaliste de l’identité qui réfute l’identification hybride. De la même façon, je n’amène pas de discussion approfondie sur les questions postcoloniales. Le but de cette thèse est de démontrer à quel point la subjectivité hybride peut être une zone de relation créatrice lorsque l’alternance de codes permet des échanges de communication plus intimes entre les cultures et les langues. C’est un espace qui devient créateur parce qu’il favorise une attitude plus ouverte vis-à-vis les différents champs qui passent par la culture, aussi bien la langue, que la sexualité, la politique ou la religion. Les zones hybrides de l’identification nous permettent de contester les traditions dépassées, les coutumes, les modes de communication et la non-acceptation, toutes choses dépassées qui emprisonnent le désir et empêchent d’explorer et d’adopter des codes en dehors des normes et des modèles de la culture contenus dans le discours blanc, dominant, de l’appartenance culturelle et linguistique mondialisée. Ainsi, il appert que ces zones des relations multi-ethniques exigent plus d’attention des cercles scolaires puisque la population des centres urbains à travers l’Amérique du Nord devient de plus en plus nourrie par d’autres types de populations. Donc, il existe un besoin réel d’établir une communication sincère qui permettrait à la population de bien comprendre les populations adoptées. C’est une invitation à stimuler une relation plus intime de l’un avec l’autre. Toutefois, il est évident qu’une communication efficace à travers les frontières des codes linguistiques, culturels, sexuels, religieux et politiques exige une négociation continuelle. Mais une telle négociation peut stimuler la compréhension plus juste des différences (culturelle ou linguistique) si des institutions académiques offrent des programmes d’études intégrant davantage les littératures migrantes. Ma thèse vise à illustrer (par son choix littéraire) l’identification hybride comme une réalité importante dans les cultures généralisées qui croissent toujours aujourd’hui. Les espaces géographiques nous gardent éloignés les uns des autres, mais notre consommation de produits exotiques, qu’ils soient culturels ou non, et même notre consommation de l’autre, s’est rétrécie sensiblement depuis les deux dernières décennies et les indicateurs suggèrent que ce processus n’est pas une tendance, mais plutôt une nouvelle manière d’éprouver la vie et de connaître les autres. Ainsi les marqueurs qui forment nos frontières externes, aussi bien que ces marqueurs qui nous définissent de l’intérieur, exigent un examen minutieux de ces enjeux inter(trans)culturels, surtout si nous souhaitons nous en tenir avec succès à des langues et des codes culturels présents, tout en favorisant la diversité culturelle et linguistique. MOTS-CLÉS : identification hybride, mouvement ouvert, alternance de code linguistique, négociation des espaces, tensions, connectivité créative

Plasma Polymerised Organic Thin Films-A Study on the Structural, Electrical and Nonlinear Optical Properties for Possible Applications

This proposed thesis is entitled “Plasma Polymerised Organic Thin Films: A study on the Structural, Electrical, and Nonlinear Optical Properties for Possible Applications. Polymers and polymer based materials find enormous applications in the realm of electronics and optoelectronics. They are employed as both active and passive components in making various devices. Enormous research activities are going on in this area for the last three decades or so, and many useful contributions are made quite accidentally. Conducting polymers is such a discovery, and eversince the discovery of conducting polyacetylene, a new branch of science itself has emerged in the form of synthetic metals. Conducting polymers are useful materials for many applications like polymer displays, high density data storage, polymer FETs, polymer LEDs, photo voltaic devices and electrochemical cells. With the emergence of molecular electronics and its potential in finding useful applications, organic thin films are receiving an unusual attention by scientists and engineers alike. This is evident from the vast literature pertaining to this field appearing in various journals. Recently, computer aided design of organic molecules have added further impetus to the ongoing research activities in this area. Polymers, especially, conducting polymers can be prepared both in the bulk and in the thinfilm form. However, many applications necessitate that they are grown in the thin film form either as free standing or on appropriate substrates. As far as their bulk counterparts are concerned, they can be prepared by various polymerisation techniques such as chemical routes and electrochemical means. A survey of the literature reveals that polymers like polyaniline, polypyrrole, polythiophene, have been investigated with a view to studying their structural electrical and optical properties. Among the various alternate techniques employed for the preparation of polymer thin films, the method of plasma polymerisation needs special attention in this context. The technique of plasma polymerisation is an inexpensive method and often requires very less infra structure. This method includes the employment of ac, rf, dc, microwave and pulsed sources. They produce pinhole free homogeneous films on appropriate substrates under controlled conditions. In conventional plasma polymerisation set up, the monomer is fed into an evacuated chamber and an ac/rf/dc/ w/pulsed discharge is created which enables the monomer species to dissociate, leading to the formation of polymer thin films. However, it has been found that the structure and hence the properties exhibited by plasma polymerized thin films are quite different from that of their counterparts produced by other thin film preparation techniques such as electrochemical deposition or spin coating. The properties of these thin films can be tuned only if the interrelationship between the structure and other properties are understood from a fundamental point of view. So very often, a through evaluation of the various properties is a pre-requisite for tailoring the properties of the thin films for applications. It has been found that conjugation is a necessary condition for enhancing the conductivity of polymer thin films. RF technique of plasma polymerisation is an excellent tool to induce conjugation and this modifies the electrical properties too. Both oxidative and reductive doping can be employed to modify the electrical properties of the polymer thin films for various applications. This is where organic thin films based on polymers scored over inorganic thin films, where in large area devices can be fabricated with organic semiconductors which is difficult to achieve by inorganic materials. For such applications, a variety of polymers have been synthesized such as polyaniline, polythiophene, polypyrrole etc. There are newer polymers added to this family every now and then. There are many virgin areas where plasma polymers are yet to make a foray namely low-k dielectrics or as potential nonlinear optical materials such as optical limiters. There are also many materials which are not been prepared by the method of plasma polymerisation. Some of the materials which are not been dealt with are phenyl hydrazine and tea tree oil. The advantage of employing organic extracts like tea tree oil monomers as precursors for making plasma polymers is that there can be value addition to the already existing uses and possibility exists in converting them to electronic grade materials, especially semiconductors and optically active materials for photonic applications. One of the major motivations of this study is to synthesize plasma polymer thin films based on aniline, phenyl hydrazine, pyrrole, tea tree oil and eucalyptus oil by employing both rf and ac plasma polymerisation techniques. This will be carried out with the objective of growing thin films on various substrates such as glass, quartz and indium tin oxide (ITO) coated glass. There are various properties namely structural, electrical, dielectric permittivity, nonlinear optical properties which are to be evaluated to establish the relationship with the structure and the other properties. Special emphasis will be laid in evaluating the optical parameters like refractive index (n), extinction coefficient (k), the real and imaginary components of dielectric constant and the optical transition energies of the polymer thin films from the spectroscopic ellipsometric studies. Apart from evaluating these physical constants, it is also possible to predict whether a material exhibit nonlinear optical properties by ellipsometric investigations. So further studies using open aperture z-scan technique in order to evaluate the nonlinear optical properties of a few selected samples which are potential nonlinear optical materials is another objective of the present study. It will be another endeavour to offer an appropriate explanation for the nonlinear optical properties displayed by these films. Doping of plasma polymers is found to modify both the electrical conductivity and optical properties. Iodine is found to modify the properties of the polymer thin films. However insitu iodine doping is tricky and the film often looses its stability because of the escape of iodine. An appropriate insitu technique of doping will be developed to dope iodine in to the plasma polymerized thin films. Doping of polymer thin films with iodine results in improved and modified optical and electrical properties. However it requires tools like FTIR and UV-Vis-NIR spectroscopy to elucidate the structural and optical modifications imparted to the polymer films. This will be attempted here to establish the role of iodine in the modification of the properties exhibited by the films

Electrical Characteristics of n-ZnO/p-Si Heterojunction Diodes Grown by Pulsed Laser Deposition at Different Oxygen Pressures

Heterojunction diodes of n-type ZnO/p-type silicon (100) were fabricated by 12 pulsed laser deposition of ZnO films on p-Si substrates in oxygen ambient at 13 different pressures. These heterojunctions were found to be rectifying with a 14 maximum forward-to-reverse current ratio of about 1,000 in the applied 15 voltage range of -5 V to +5 V. The turn-on voltage of the heterojunctions was 16 found to depend on the ambient oxygen pressure during the growth of the ZnO 17 film. The current density–voltage characteristics and the variation of the 18 series resistance of the n-ZnO/p-Si heterojunctions were found to be in line 19 with the Anderson model and Burstein-Moss (BM) shift.