Towards a model for the measurement of data quality in websites

Websites are, nowadays, the face of institutions, but they are often neglected, especially when it comes to contents. In the present paper, we put forth an investigation work whose final goal is the development of a model for the measurement of data quality in institutional websites for health units. To that end, we have carried out a bibliographic review of the available approaches for the evaluation of website content quality, in order to identify the most recurrent dimensions and the attributes, and we are currently carrying out a Delphi Method process, presently in its second stage, with the purpose of reaching an adequate set of attributes for the measurement of content quality.

Is the pollination efficiency of long-lived orchid flowers affected by age?

The long-lived flowers of orchids increase the chances of pollination and thus the reproductive success of the species. However, a question arises: does the efficiency of pollination, expressed by fruit set, vary with the flower age? The objective of this study was to verify whether the flower age of Corymborkis flava(Sw.) Kuntze affects pollination efficiency. The following hypotheses were tested: 1) the fruit set of older flowers is lower than that of younger ones; 2) morphological observations (perianth and stigmatic area), stigma receptivity test by using a solution of hydrogen peroxide and hand-pollination tests are equally effective in defining the period of stigmatic receptivity. Flowers were found to be receptive from the first to the fourth day of anthesis. Fruit set of older flowers (third and fourth day) was lower than that of younger flowers. Morphological observations, the stigma receptivity test and hand-pollinations were equally effective in defining the period of stigmatic receptivity. However, to evaluate the maximum degree of stigma receptivity of orchid species with long-lived flowers, we recommend hand-pollinations, beyond the period of receptivity.

Use efficiency of variable rate of nitrogen prescribed by optical sensor in corn

ABSTRACT The efficiency of nitrogen fertilizer in corn is usually low, negatively affecting plant nutrition, the economic return, and the environment. In this context, a variable rate of nitrogen, prescribed by crop sensors, has been proposed as an alternative to the uniform rate of nitrogen traditionally used by farmers. This study tested the hypothesis that variable rate of nitrogen, prescribed by optical sensor, increases the nitrogen use efficiency and grain yield as compared to uniform rate of nitrogen. The following treatments were evaluated: 0; 70; 140; and 210 kg ha-1 under uniform rate of nitrogen, and 140 kg ha -1 under variable rate of nitrogen. The nitrogen source was urea applied on the soil surface using a distributor equipped with the crop sensor. In this study, the grain yield ranged from 10.2 to 15.5 Mg ha-1, with linear response to nitrogen rates. The variable rate of nitrogen increased by 11.8 and 32.6% the nitrogen uptake and nitrogen use efficiency, respectively, compared to the uniform rate of nitrogen. However, no significant increase in grain yield was observed, indicating that the major benefit of the variable rate of nitrogen was reducing the risk of environmental impact of fertilizer.

EVALUATING THE EFFICIENCY PROGRESS WITH TECHNOLOGY IN A SPANISH HOTEL CHAIN

ABSTRACTThis paper analyzes the changes in the total factor productivity index of a Spanish hotel chain in the period from 2007 to 2010 with the purpose of identifying efficiency patterns for the chain in a period of financial crisis. The data envelopment analysis (DEA) Malmquist productivity index was used to estimate productivity change in 38 hotels of the AC chain. Results reveal AC hotels' efficiency trends and, therefore, their competitiveness in the recession period; they also show the changes experienced in these hotels' total productivity and its components: technological and efficiency changes. Positive efficiency changes were due to positive technical efficiency rather than technological efficiency. The recession period certainly influenced the performance of AC Hotels, which focused on organizational changes rather than investing in technology.

The measurement by serological means of the impact of the Hong Kong/68 influenza virus on a population

In order to obtain evidence on the size of the impact of the Hong Kong/68 variant of influenza A2 virus on the population of São Paulo, Brazil, serum samples taken in 1967 before this variant appeared and during successive years after it appeared were examined for their antibody content. Haemagglutination-inhibition tests performed on a total of 2726 serum samples from adults showed a sharp decrease in 1969 of the proportion of sera without antibody to the Hong Kong/68 variant and a corresponding mercase in the proportion with high titres. It was concluded that about three-quarters of the adult population became infected at some time after the variant appeared, the majority in the first year of prevalence.

Compression Efficiency Analysis of Wyner-Ziv Video Coding with Motion Compensated Side Information Interpolation

The Wyner-Ziv video coding (WZVC) rate distortion performance is highly dependent on the quality of the side information, an estimation of the original frame, created at the decoder. This paper, characterizes the WZVC efficiency when motion compensated frame interpolation (MCFI) techniques are used to generate the side information, a difficult problem in WZVC especially because the decoder only has available some reference decoded frames. The proposed WZVC compression efficiency rate model relates the power spectral of the estimation error to the accuracy of the MCFI motion field. Then, some interesting conclusions may be derived related to the impact of the motion field smoothness and the correlation to the true motion trajectories on the compression performance.

Sistemas de automação e manutenção de edifícios: eficiência energética dos sistemas de elevação vertical para transporte de pessoas

O presente trabalho incide sobre a análise da eficiência energética dos elevadores. Para se poder entender esta questão, são apresentadas diversas informações que permitem conhecer os factores associados aos consumos de energia activa, procurando-se perceber qual o rendimento destes equipamentos. Inicialmente são analisados os diversos componentes, que fazem parte de um elevador e os locais em que esses componentes são instalados. Abordam-se as diferentes soluções de accionamento, os diversos tipos de utilização e as diferentes tecnologias que podem ser aplicadas. O estudo dos consumos de energia eléctrica dos elevadores, foi efectuado com base na metodologia desenvolvida pelo grupo E4, do programa Utilização Eficiente da Energia, da Comunidade Europeia, cujo suporte foi o DRAFT ISSO/DIS 25745 - 1 Energy Performance of Lifts and Escalators - Part 1: Energy Measurement and Conformance. Os consumos de energia eléctrica serão caracterizados com os elevadores a serem monitorizados individualmente e sem carga na cabina. A apresentação de resultados obtidos terá em linha de conta: a energia eléctrica consumida com o equipamento em modo de funcionamento, ou seja, com este a realizar ciclos completos, e a potência eléctrica consumida com a instalação em modo de standby, ou seja em não operação. No presente trabalho, são divulgados estudos do grupo E4, em que foram monitorizados elevadores em quatro países da Europa: Portugal, Alemanha, Itália e Polónia. Estes estudos permitem estimar os consumos anuais de energia eléctrica, a nível de funcionamento e a nível de standby e estimar o consumo total, seguindo como base a metodologia anteriormente referida. Para se caracterizar o parque Europeu de elevadores, o grupo E4 recorreu à ELA, Associação Europeia de Elevadores, tendo assim sido possível estimar o consumo anual numa Europa a 27, acrescido do parque da Suíça e da Noruega. Pretende-se com isso poder estimar o potencial de redução no consumo energético no parque analisado, com a aplicação das Melhores Tecnologias Disponíveis (MTD) e com a aplicação de tecnologias que ainda estão em fase de desenvolvimento. (MTND). Paralelamente o autor irá apresentar as monitorizações que efectuou a três elevadores, para os quais procurou validar as leituras efectuadas, comparando os consumos obtidos, com os consumos registados pelas monitorizações do grupo E4 e respectivas estimativas de consumos anuais de energia. As monitorizações do autor, serão utilizadas na catalogação desses três equipamentos a nível de classes de eficiência energética, tendo por base a VDI 4707/Part 1 - Lifts - Energy Efficiency - VDI manual Building Services - Volume 5: Transportation Systems. Procura-se, também, criar um método de apoio na tomada de decisão nas diversas fases de um ciclo do elevador, nomeadamente: desde a especificação, a selecção do sistema de accionamento, a selecção dos sistemas auxiliares, a instalação e a operação do elevador, com vista à melhoria da eficiência energética, e á instalação futura ou à modernização dos equipamentos existentes. Abordam-se as barreiras existentes que inibem a mudança no sector de elevação, para a implementação das MTD no parque de elevadores existente ou no desenvolvimento de novas tecnologias que possibilitem a melhoria da eficiência energética, MTND. Por ultimo, aborda-se de forma simples a temática da supervisão técnica nos elevadores, através da monitorização e supervisão dos diversos componentes, com vista à optimização da gestão da manutenção e procurando interligar esta gestão à melhoria da eficiência energética. Consegue-se concluir que apenas com a aplicação das MTD, podem ser obtidos ganhos de eficiência energética, e também que este tema não tem tido a importância que merece, pois, na análise da eficiência energética de um edifício, a eficiência dos elevadores não é tida em consideração. A ausência de legislação específica, que torne a análise da eficiência energética dos elevadores obrigatória, será um dos problemas referidos. Reforça-se que, a potencialidade de poupança energética na Europa não deve ser desprezada.

Caracterização experimental e numérica do desempenho térmico de um edifício "gaioleiro": identificação de oportunidades de melhoria

O sector dos edifícios é responsável por uma percentagem significativa dos consumos de energia primária e de energia eléctrica em Portugal, associada principalmente ao conforto térmico dos seus ocupantes. A União Europeia pretende uma redução de 20%, até 2020, dos consumos de energia e consequentes emissões de CO2 através da melhoria da eficiência energética dos edifícios públicos e residenciais. Em Portugal, o Plano Nacional para a Eficiência Energética (PNAEE) tem por objectivo obter uma poupança anual de energia de pelo menos 1% até ao ano de 2016, tomando como base a média de consumos de energia final, registados entre 2001 e 2005. Neste contexto, os edifícios anteriores a 1990 (primeira versão do RCCTE) podem apresentar um potencial significativo de melhoria da sua eficiência energética com base na sua reabilitação. Os edifícios “Gaioleiros” (1880 – 1930) constituindo uma parte importante do património histórico da cidade de Lisboa, para os quais a informação sobre o seu desempenho térmico é limitada, considerou-se pertinente efectuar um estudo destinado à sua caracterização experimental e numérica, face à especificidade do comportamento térmico das suas paredes caracterizadas pela elevada espessura. No presente trabalho, apresenta-se a metodologia e os resultados experimentais da medição da resistência térmica das paredes e da medição das necessidades térmicas de aquecimento da habitação. Estes resultados experimentais foram utilizados na validação do modelo de simulação térmica da habitação, que posteriormente serviu para avaliar as suas necessidades térmicas de aquecimento (Nic) e de arrefecimento (Nvc), identificar oportunidades de melhoria e avaliar o respectivo potencial de reabilitação. Neste trabalho, como contributos para uma reabilitação sustentável, apresentam-se avaliações de oportunidades de melhoria com base em estratégias de reforço do isolamento térmico. Dos resultados obtidos concluiu-se que melhorando o isolamento térmico das paredes e vãos envidraçados é possível baixar consideravelmente os consumos de energia associados à habitação, cumprindo assim as exigências estabelecidas no RCCTE ao nível dos requisitos de qualidade térmica da envolvente e consumos energéticos para edifícios novos e grandes reabilitações.

Validation of a measurement scale for the relationship between the orientation to corporate social responsibility and other business strategic variables

The importance of Social Responsibility (SR) is higher if this business variable is related with other ones of strategic nature in business activity (competitive success that the company achieved, performance that the firms develop and innovations that they carries out). The hypothesis is that organizations that focus on SR are those who get higher outputs and innovate more, achieving greater competitive success. A scale for measuring the orientation to SR has defined in order to determine the degree of relationship between above elements. This instrument is original because previous scales do not exist in the literature which could measure, on the one hand, the three classics sub-constructs theoretically accepted that SR is made up and, on the other hand, the relationship between SR and the other variables. As a result of causal relationships analysis we conclude with a scale of 21 indicators, validated scale with a sample of firms belonging to the Autonomous Community of Extremadura and it is the first empirical validation of these dimensions we know so far, in this context.

Reward-risk efficiency in proportional reinsurance with different risk measures

We have studied, in particular under normality of the implied random variables, the connections between different measures of risk such as the standard deviation, the W-ruin probability and the p-V@R. We discuss conditions granting the equivalence of these measures with respect to risk preference relations and the equivalence of dominance and efficiency of risk-reward criteria involving these measures. Then more specifically we applied these concepts to rigorously face the problem of finding the efficient set of de Finetti’s variable quota share proportional reinsurance.

From efficiency to optimality in proportional reinsurance under group correlation

Based on our recent discovery of closed form formulae of efficient Mean Variance retentions in variable quota-share proportional reinsurance under group correlation, we analyzed the influence of different combination of correlation and safety loading levels on the efficient frontier, both in a single period stylized problem and in a multiperiod one.

Light pollution and energy efficiency: a case study of the village of Vialonga

Since industrialization and the formation of larger urban centers in the nineteenth century, pollution of the environment was always present in daily life in various ways, namely in the form of light. Light pollution can cause various consequences, both for humans and for their ecosystem, producing effects on environmental, social, economic and scientific level. In Portugal, the lighting is responsible for 3% of total electricity consumption, energy costs are in some cases more than 50% towards the costs incurred by municipalities with energy, checking-in recent years a trend similar to that improvement of illumination levels in the region (about 4 to 5% per year). Proper use of lighting brings many benefits both to the citizen and environment, since greater energy efficiency can contribute to reducing CO2 emissions, energy costs, as well as to decrease the use of resources not-renewable and/or contamination of renewable resources, which can occurs in the process of obtaining electricity. The present study has a main goal to analyze the illuminance levels associated to the public lighting of the village of Vialonga, Vila Franca de Xira (Portugal), to verify if it is efficient. The aim is also to relate the efficiency of street lighting with the existence of light pollution.

Digital radiography detector performance

The characterization of physical properties of digital imaging systems requires the determination and measurement of detectors’ physical performance. Those measures such as modulation transfer function (MTF), noise power spectra (NPS), and detective quantum efficiency (DQE) provide objective evaluations of digital detectors’ performance. To provide an MTF, NPS, and DQE calculation from raw-data images it is necessary to implement a method that is undertaken by two major steps: (1) image acquisition and (2) quantitative measure determination method. In this chapter a comprehensive description about a method to provide the measure of performance of digital radiography detectors is provided.