899 resultados para Economies of density
Resumo:
Possible structures of La2C2 were studied and proposed by use of density functional theory. All proposed isomers are planar. The results indicate that the structure with the lowest symmetry (C-1) is the most stable. Linear isomers are not favored.
Resumo:
Background Chronic illness and premature mortality from malaria, water-borne diseases, and respiratory illnesses have long been known to diminish the welfare of individuals and households in developing countries. Previous research has also shown that chronic diseases among farming populations suppress labor productivity and agricultural output. As the illness and death toll from HIV/AIDS continues to climb in most of sub-Saharan Africa, concern has arisen that the loss of household labor it causes will reduce crop yields, impoverish farming households, intensify malnutrition, and suppress growth in the agricultural sector. If chronic morbidity and premature mortality among individuals in farming households have substantial impacts on household production, and if a large number of households are affected, it is possible that an increase in morbidity and mortality from HIV/AIDS or other diseases could affect national aggregate output and exports. If, on the other hand, the impact at the household farm level is modest, or if relatively few households are affected, there is likely to be little effect on aggregate production across an entire country. Which of these outcomes is more likely in West Africa is unknown. Little rigorous, quantitative research has been published on the impacts of AIDS on smallholder farm production, particularly in West Africa. The handful of studies that have been conducted have looked mainly at small populations in areas of very high HIV prevalence in southern and eastern Africa. Conclusions about how HIV/AIDS, and other causes of chronic morbidity and mortality, are affecting agriculture across the continent cannot be drawn from these studies. In view of the importance of agriculture, and particularly smallholder agriculture, in the economies of most African countries and the scarcity of resources for health interventions, it is valuable to identify, describe, and quantify the impact of chronic morbidity and mortality on smallholder production of important crops in West Africa. One such crop is cocoa. In Ghana, cocoa is a crop of national importance that is produced almost exclusively by smallholder households. In 2003, Ghana was the world’s second-largest producer of cocoa. Cocoa accounted for a quarter of Ghana’s export revenues that year and generated 15 percent of employment. The success and growth of the cocoa industry is thus vital to the country’s overall social and economic development. Study Objectives and Methods In February and March 2005, the Center for International Health and Development of Boston University (CIHD) and the Department of Agricultural Economics and Agribusiness (DAEA) of the University of Ghana, with financial support from the Africa Bureau of the U.S. Agency for International Development and from Mars, Inc., which is a major purchaser of West African cocoa, conducted a survey of a random sample of cocoa farming households in the Western Region of Ghana. The survey documented the extent of chronic morbidity and mortality in cocoa growing households in the Western Region of Ghana, the country’s largest cocoa growing region, and analyzed the impact of morbidity and mortality on cocoa production. It aimed to answer three specific research questions. (1) What is the baseline status of the study population in terms of household size and composition, acute and chronic morbidity, recent mortality, and cocoa production? (2) What is the relationship between household size and cocoa production, and how can this relationship be used to understand the impact of adult mortality and chronic morbidity on the production of cocoa at the household level? The study population was the approximately 42,000 cocoa farming households in the southern part of Ghana’s Western Region. A random sample of households was selected from a roster of eligible households developed from existing administrative information. Under the supervision of the University of Ghana field team, enumerators were graduate students of the Department of Agricultural Economics and Agribusiness or employees of the Cocoa Services Division. A total of 632 eligible farmers participated in the survey. Of these, 610 provided complete responses to all questions needed to complete the multivariate statistical analysis reported here.
Resumo:
This thesis is focused on the application of numerical atomic basis sets in studies of the structural, electronic and transport properties of silicon nanowire structures from first-principles within the framework of Density Functional Theory. First we critically examine the applied methodology and then offer predictions regarding the transport properties and realisation of silicon nanowire devices. The performance of numerical atomic orbitals is benchmarked against calculations performed with plane waves basis sets. After establishing the convergence of total energy and electronic structure calculations with increasing basis size we have shown that their quality greatly improves with the optimisation of the contraction for a fixed basis size. The double zeta polarised basis offers a reasonable approximation to study structural and electronic properties and transferability exists between various nanowire structures. This is most important to reduce the computational cost. The impact of basis sets on transport properties in silicon nanowires with oxygen and dopant impurities have also been studied. It is found that whilst transmission features quantitatively converge with increasing contraction there is a weaker dependence on basis set for the mean free path; the double zeta polarised basis offers a good compromise whereas the single zeta basis set yields qualitatively reasonable results. Studying the transport properties of nanowire-based transistor setups with p+-n-p+ and p+-i-p+ doping profiles it is shown that charge self-consistency affects the I-V characteristics more significantly than the basis set choice. It is predicted that such ultrascaled (3 nm length) transistors would show degraded performance due to relatively high source-drain tunnelling currents. Finally, it is shown the hole mobility of Si nanowires nominally doped with boron decreases monotonically with decreasing width at fixed doping density and increasing dopant concentration. Significant mobility variations are identified which can explain experimental observations.
Resumo:
Thin film dielectrics based on titanium, zirconium or hafnium oxides are being introduced to increase the permittivity of insulating layers in transistors for micro/nanoelectronics and memory devices. Atomic layer deposition (ALD) is the process of choice for fabricating these films, as it allows for high control of composition and thickness in thin, conformal films which can be deposited on substrates with high aspect-ratio features. The success of this method depends crucially on the chemical properties of the precursor molecules. A successful ALD precursor should be volatile, stable in the gas-phase, but reactive on the substrate and growing surface, leading to inert by-products. In recent years, many different ALD precursors for metal oxides have been developed, but many of them suffer from low thermal stability. Much promise is shown by group 4 metal precursors that contain cyclopentadienyl (Cp = C5H5-xRx) ligands. One of the main advantages of Cp precursors is their thermal stability. In this work ab initio calculations were carried out at the level of density functional theory (DFT) on a range of heteroleptic metallocenes [M(Cp)4-n(L)n], M = Hf/Zr/Ti, L = Me and OMe, in order to find mechanistic reasons for their observed behaviour during ALD. Based on optimized monomer structures, reactivity is analyzed with respect to ligand elimination. The order in which different ligands are eliminated during ALD follows their energetics which was in agreement with experimental measurements. Titanocene-derived precursors, TiCp*(OMe)3, do not yield TiO2 films in atomic layer deposition (ALD) with water, while Ti(OMe)4 does. DFT was used to model the ALD reaction sequence and find the reason for the difference in growth behaviour. Both precursors adsorb initially via hydrogen-bonding. The simulations reveal that the Cp* ligand of TiCp*(OMe)3 lowers the Lewis acidity of the Ti centre and prevents its coordination to surface O (densification) during both of the ALD pulses. Blocking this step hindered further ALD reactions and for that reason no ALD growth is observed from TiCp*(OMe)3 and water. The thermal stability in the gas phase of Ti, Zr and Hf precursors that contain cyclopentadienyl ligands was also considered. The reaction that was found using DFT is an intramolecular α-H transfer that produces an alkylidene complex. The analysis shows that thermal stabilities of complexes of the type MCp2(CH3)2 increase down group 4 (M = Ti, Zr and Hf) due to an increase in the HOMO-LUMO band gap of the reactants, which itself increases with the electrophilicity of the metal. The reverse reaction of α-hydrogen abstraction in ZrCp2Me2 is 1,2-addition reaction of a C-H bond to a Zr=C bond. The same mechanism is investigated to determine if it operates for 1,2 addition of the tBu C-H across Hf=N in a corresponding Hf dimer complex. The aim of this work is to understand orbital interactions, how bonds break and how new bonds form, and in what state hydrogen is transferred during the reaction. Calculations reveal two synchronous and concerted electron transfers within a four-membered cyclic transition state in the plane between the cyclopentadienyl rings, one π(M=X)-to-σ(M-C) involving metal d orbitals and the other σ(C-H)-to-σ(X-H) mediating the transfer of neutral H, where X = C or N. The reaction of the hafnium dimer complex with CO that was studied for the purpose of understanding C-H bond activation has another interesting application, namely the cleavage of an N-N bond and resulting N-C bond formation. Analysis of the orbital plots reveals repulsion between the occupied orbitals on CO and the N-N unit where CO approaches along the N-N axis. The repulsions along the N-N axis are minimized by instead forming an asymmetrical intermediate in which CO first coordinates to one Hf and then to N. This breaks the symmetry of the N-N unit and the resultant mixing of MOs allows σ(NN) to be polarized, localizing electrons on the more distant N. This allowed σ(CO) and π(CO) donation to N and back-donation of π*(Hf2N2) to CO. Improved understanding of the chemistry of metal complexes can be gained from atomic-scale modelling and this provides valuable information for the design of new ALD precursors. The information gained from the model decomposition pathway can be additionally used to understand the chemistry of molecules in the ALD process as well as in catalytic systems.
Resumo:
This PhD thesis concerns the computational modeling of the electronic and atomic structure of point defects in technologically relevant materials. Identifying the atomistic origin of defects observed in the electrical characteristics of electronic devices has been a long-term goal of first-principles methods. First principles simulations are performed in this thesis, consisting of density functional theory (DFT) supplemented with many body perturbation theory (MBPT) methods, of native defects in bulk and slab models of In0.53Ga0.47As. The latter consist of (100) - oriented surfaces passivated with A12O3. Our results indicate that the experimentally extracted midgap interface state density (Dit) peaks are not the result of defects directly at the semiconductor/oxide interface, but originate from defects in a more bulk-like chemical environment. This conclusion is reached by considering the energy of charge transition levels for defects at the interface as a function of distance from the oxide. Our work provides insight into the types of defects responsible for the observed departure from ideal electrical behaviour in III-V metal-oxidesemiconductor (MOS) capacitors. In addition, the formation energetics and electron scattering properties of point defects in carbon nanotubes (CNTs) are studied using DFT in conjunction with Green’s function based techniques. The latter are applied to evaluate the low-temperature, low-bias Landauer conductance spectrum from which mesoscopic transport properties such as the elastic mean free path and localization length of technologically relevant CNT sizes can be estimated from computationally tractable CNT models. Our calculations show that at CNT diameters pertinent to interconnect applications, the 555777 divacancy defect results in increased scattering and hence higher electrical resistance for electron transport near the Fermi level.
Resumo:
Copper is the main interconnect material in microelectronic devices, and a 2 nm-thick continuous Cu film seed layer needs to be deposited to produce microelectronic devices with the smallest features and more functionality. Atomic layer deposition (ALD) is the most suitable method to deposit such thin films. However, the reaction mechanism and the surface chemistry of copper ALD remain unclear, which is deterring the development of better precursors and design of new ALD processes. In this thesis, we study the surface chemistries during ALD of copper by means of density functional theory (DFT). To understand the effect of temperature and pressure on the composition of copper with substrates, we used ab initio atomistic thermodynamics to obtain phase diagram of the Cu(111)/SiO2(0001) interface. We found that the interfacial oxide Cu2O phases prefer high oxygen pressure and low temperature while the silicide phases are stable at low oxygen pressure and high temperature for Cu/SiO2 interface, which is in good agreement with experimental observations. Understanding the precursor adsorption on surfaces is important for understanding the surface chemistry and reaction mechanism of the Cu ALD process. Focusing on two common Cu ALD precursors, Cu(dmap)2 and Cu(acac)2, we studied the precursor adsorption on Cu surfaces by means of van der Waals (vdW) inclusive DFT methods. We found that the adsorption energies and adsorption geometries are dependent on the adsorption sites and on the method used to include vdW in the DFT calculation. Both precursor molecules are partially decomposed and the Cu cations are partially reduced in their chemisorbed structure. It is found that clean cleavage of the ligand−metal bond is one of the requirements for selecting precursors for ALD of metals. 2 Bonding between surface and an atom in the ligand which is not coordinated with the Cu may result in impurities in the thin film. To have insight into the reaction mechanism of a full ALD cycle of Cu ALD, we proposed reaction pathways based on activation energies and reaction energies for a range of surface reactions between Cu(dmap)2 and Et2Zn. The butane formation and desorption steps are found to be extremely exothermic, explaining the ALD reaction scheme of original experimental work. Endothermic ligand diffusion and re-ordering steps may result in residual dmap ligands blocking surface sites at the end of the Et2Zn pulse, and in residual Zn being reduced and incorporated as an impurity. This may lead to very slow growth rate, as was the case in the experimental work. By investigating the reduction of CuO to metallic Cu, we elucidated the role of the reducing agent in indirect ALD of Cu. We found that CuO bulk is protected from reduction during vacuum annealing by the CuO surface and that H2 is required in order to reduce that surface, which shows that the strength of reducing agent is important to obtain fully reduced metal thin films during indirect ALD processes. Overall, in this thesis, we studied the surface chemistries and reaction mechanisms of Cu ALD processes and the nucleation of Cu to form a thin film.
Resumo:
The effectiveness of corporate governance mechanisms has been a subject of academic research for many decades. Although the large majority of corporate governance studies prior to mid 1990s were based on data from developed market economies such as the U.S., U.K. and Japan, in recent years researchers have begun examining corporate governance in transition economies. A comparison of China and India offers a unique environment for analyzing the effectiveness of corporate governance. First, both countries state-owned enterprise (SOE) reform strategies hinges on the Modern Enterprise System characterized by the separation of ownership and control. Ownership of an SOE’s assets is distributed among the government, institutional investors, managers, employees, and private investors. Effective control rights are assigned to management, which generally has a very small, or even nonexistent ownership stake. This distinctive shareholding structure creates conflict of interest not only between management (insiders) and outside investors but also between large shareholders and minority investors. Moreover, because both governments desire to retain some control—in part through partial retained ownership of commercialized SOEs, further conflicts arise between politicians and firms. Second, directors in publicly listed firms in both countries are predominantly drawn from institutions with significant non-market objectives: the government and other state enterprises, particularly in China, and extended families, particularly in India. As a result, the effectiveness of internal governance mechanisms, such as the number of independent directors on the board and the number of independent supervisors on the supervisory committee, are likely to be quiet limited, although this has yet to be fully evaluated. Third, because of the political nature of the privatization process itself, typical external governance mechanisms, such as debt (in conjunction with appropriate bankruptcy procedures), takeover threats, legal protection of investors, product market competition, etc., have not been effective. Bank loans have traditionally been viewed as grants from the state designed to bail out failing firms. State-owned banks retain monopoly or quasi-monopoly positions in the banking sector and profit is not their overriding objective. If political favor is deemed appropriate, subsidized loans, rescheduling of overdue debt or even outright transfer of funds can be arranged with SOEs (soft budget constraints). In addition, a market for private, non-bank debt is limited in India and has yet to be established China. There is no active merger or takeover activity in Chinese stock markets to discipline management. Information available in the capital markets is insufficient to keep at arm’s length of the corporate decisions. In light of the above peculiarities, China and India share many of the typical institutional characteristics as a transition economy, including poor legal protection of creditors and investors, the absence of an effective takeover market, an underdeveloped capital market, a relative inefficient banking system and significant interference of politicians in firm management. Su (2005) finds that the extent of political interference, managerial entrenchment and institutional control can help explain corporate dividend policies and post-IPO financing choices in this situation. Allen et al. (2005) demonstrate that standard corporate governance mechanisms are weak and ineffective for publicly listed firms while alternative governance mechanisms based on reputation and relationship have been remarkably effective in the private sector. Because the peculiarities are significant in this context, the differences in the political-economies of the two countries are likely to be evident in such relational terms. In this paper we explore the peculiarities of corporate governance in this transitional environment through a systematic examination of certain aspects of these reputational and relationship dimensions. Utilising the methods of social network analysis we identify the inter-organisational relationships at board level formed by equity holdings and by shared directors. Using data drawn from the Orbis database we map these relations among the 3700 largest firms in India and China respectively and identify the roles played in these relational networks by the particularly characteristic institutions in each case. We find greatly different social network structures in each case with some support in these relational dimensions for their distinctive features of governance. Further, the social network metrics allow us to considerably refine proxies for political interference, managerial entrenchment and institutional control used in earlier econometric analysis.
Resumo:
1. Barnacles are a good model organism for the study of open populations with space-limited recruitment. These models are applicable to other species with open supply of new individuals and resource limitation. The inclusion of space in models leads to reductions in recruitment with increasing density, and thus predictions of population size and stability are possible. 2. Despite the potential generality of a demographic theory for open space-limited populations, the models currently have a narrow empirical base. In this study, a model for an open population with space-limited recruitment was extended to include size-specific survival and promotions to any size class. The assumptions of this model were tested using data from a pan-European study of the barnacle Chthamalus montagui Southward. Two models were constructed: a 6-month model and a periodic annual model. Predicted equilibria and their stabilities were compared between shores. 3. Tests of model assumptions supported the extension of the theory to include promotions to any size class. Mortality was found to be size-specific and density independent. Studied populations were open, with recruitment proportional to free space. 4. The 6-month model showed a significant interaction between time and location for equilibrium free space. This may have been due to contrasts in the timing of structuring processes (i.e. creating and filling space) between Mediterranean and Atlantic systems. Integration of the 6-month models into a periodic annual model removed the differences in equilibrium-free space between locations. 5. Model predictions show a remarkable similarity between shores at a European scale. Populations were persistent and all solutions were stable. This reflects the apparent absence of density-dependent mortality and a high adult survivorship in C. montagui. As populations are intrinsically stable, observations of fluctuations in density are directly attributable to variations in the environmental forcing of recruitment or mortality
Resumo:
The applicability of density functional (DF) methods has progressed greatly since the first workshop of this series ten years ago. Applications that show both the successes and the limitations can be found in the fields of: (a) the structures of the isomers of atomic clusters. and (b) the structure of organic molecules and polymers, and their reactions with additional molecules. We shall review some of the results and the lessons to be learned from them. (C) 2001 Elsevier Science B.V. All rights reserved.
Resumo:
A model of the polymerization of ring oligomers of bisphenol A polycarbonate (BPA-PC) is used to investigate the influence of dimensionality (2D or 3D), density and temperature on the size distribution of the polymer chains. The polymerization step is catalyzed by a single active particle, conserves the number and type of the chemical bonds, and occurs without a significant gain in either potential energy or configurational entropy. Monte Carlo and molecular dynamics simulations show that polymerization of cyclic oligomers occurs readily at high density and is driven by the entropy associated with the distribution of interparticle bonds. Polymerization competes at lower densities with long range diffusion, which favors small molecular species, and is prevented if the system is sufficiently dilute. Polymerization occurs in 2D via a weakly first order transition as a function of density and is characterized by low hysteresis and large fluctuations in the size of polymer chains. Polymerization occurs more readily in 3D than in 2D, and is favored by increasing temperature, as expected for an entropy-driven process. (C) 2001 American Institute of Physics.
Resumo:
The interaction between supernova ejecta and circumstellar matter, arising from previous episodes of mass loss, provides us with a means of constraining the progenitors of supernovae. Radio observations of a number of supernovae show quasi-periodic deviations from a strict power-law decline at late times. Although several possibilities have been put forward to explain these modulations, no single explanation has proven to be entirely satisfactory. Here we suggest that Luminous blue variables undergoing S-Doradus type variations give rise to enhanced phases of mass loss that are imprinted on the immediate environment of the exploding star as a series of density enhancements. The variations in mass loss arise from changes in the ionization balance of Fe, the dominant ion that drives the wind. With this idea, we find that both the recurrence timescale of the variability and the amplitude of the modulations are in line with the observations. Our scenario thus provides a natural, single-star explanation for the observed behaviour that is, in fact, expected on theoretical grounds.
Resumo:
This article shows the main results obtained from the Delphi study, which was made of politicians and technicians from the Department of Social Policy in the County Council of Gipuzkoa, concerning the possibility of cooperativizing the provision of social services in this historical territory. With this in mind, the structure of this article is in two different parts. The first part develops the theoretical framework which serves as inspiration for the empirical work, where note is made of the main theoretical proposals that have a bearing on the collective dimension of citizen participation in the management of public services. Among the various models, those which prioritise public participation through social and solidarity economy entities stand out. The second part concerns itself with the presentation of the field research results. To this end, the methodological notes concerning the preparation process for the Delphi analysis are presented first and this is immediately followed by a synthesis of the main results obtained in this study. The article ends with a section of conclusions and future lines of action.
Resumo:
Experimental measurements of density at different temperatures ranging from 293.15 to 313.15 K, the speed of sound and osmotic coefficients at 298.15 K for aqueous solution of 1-ethyl-3-methylimidazolium bromide ([Emim][Br]), and osmotic coefficients at 298.15 K for aqueous solutions of 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) in the dilute concentration region are taken. The data are used to obtain compressibilities, expansivity, apparent and limiting molar properties, internal pressure, activity, and activity coefficients for [Emim][Br] in aqueous solutions. Experimental activity coefficient data are compared with that obtained from Debye-Hückel and Pitzer models. The activity data are further used to obtain the hydration number and the osmotic second virial coefficients of ionic liquids. Partial molar entropies of [Bmim][Cl] are also obtained using the free-energy and enthalpy data. The distance of the closest approach of ions is estimated using the activity data for ILs in aqueous solutions and is compared with that of X-ray data analysis in the solid phase. The measured data show that the concentration dependence for aqueous solutions of [Emim][Br] can be accounted for in terms of the hydrophobic hydration of ions and that this IL exhibits Coulombic interactions as well as hydrophobic hydration for both the cations and anions. The small hydration numbers for the studied ILs indicate that the low charge density of cations and their hydrophobic nature is responsible for the formation of the water-structure-enforced ion pairs.
Resumo:
Non-ideal behaviour of 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF6] in ethylene glycol monomethyl ether; CH3OCH2CH2OH (EGMME), ethylene glycol dimethyl ether; CH3OCH2CH2OCH3 (EGDME) and diethylene glycol dimethyl ether; CH3(OCH2CH2)2OCH3 (DEGDME) have been investigated over the whole composition range at T = (298.15 to 318.15) K. To gain insight into the mixing behaviour, results of density measurements were used to estimate excess molar volumes, image, apparent molar volumes, Vphi,i, partial molar volumes, image, excess partial molar volumes, image, and their limiting values at infinite dilution, image, image, and image, respectively. Volumetric results have been analyzed in the light of Prigogine–Flory–Patterson (PFP) statistical mechanical theory. Measurements of refractive indices n were also performed for all the binary mixtures over whole composition range at T = 298.15 K. Deviations in refractive indices ?phin and the deviation of molar refraction ?xR have been calculated from experimental data. Refractive indices results have been correlated with volumetric results and have been interpreted in terms of molecular interactions. Excess properties are fitted to the Redlich–Kister polynomial equation to obtain the binary coefficients and the standard errors.
Resumo:
Until now, there has been little empirical evidence that EU Emissions Trading Scheme (ETS) transaction costs are incurred at firm level. The transaction costs (internal costs, capital costs, consultancy and trading costs) incurred by Irish firms under the EU ETS during its pilot phase (2005-2007) were measured and analysed. Evidence for the sources of transaction costs, their magnitude and the distribution of costs shows that these were mainly administrative in nature. Considerable variation in costs was found due to economies of scale, as the costs per tonne of CO2 were lower for participants with larger allocations. For the largest firms - accounting for over half the emissions - average transaction costs were €0.05 per tonne. However, for small firms, average transaction costs were €2.02 - over 18% of the current allowance price. This supports the concerns that transaction costs are excessive for smaller participants. The immediate policy implication is that additional attention will be needed to address different sizes of firms, number of installations per firm, and the size of the initial allocations.