Eucalyptol, an essential oil, reduces contractile activity in rat cardiac muscle

Eucalyptol is an essential oil that relaxes bronchial and vascular smooth muscle although its direct actions on isolated myocardium have not been reported. We investigated a putative negative inotropic effect of the oil on left ventricular papillary muscles from male Wistar rats weighing 250 to 300 g, as well as its effects on isometric force, rate of force development, time parameters, post-rest potentiation, positive inotropic interventions produced by Ca2+ and isoproterenol, and on tetanic tension. The effects of 0.3 mM eucalyptol on myosin ATPase activity were also investigated. Eucalyptol (0.003 to 0.3 mM) reduced isometric tension, the rate of force development and time parameters. The oil reduced the force developed by steady-state contractions (50% at 0.3 mM) but did not alter sarcoplasmic reticulum function or post-rest contractions and produced a progressive increase in relative potentiation. Increased extracellular Ca2+ concentration (0.62 to 5 mM) and isoproterenol (20 nM) administration counteracted the negative inotropic effects of the oil. The activity of the contractile machinery evaluated by tetanic force development was reduced by 30 to 50% but myosin ATPase activity was not affected by eucalyptol (0.3 mM), supporting the idea of a reduction of sarcolemmal Ca2+ influx. The present results suggest that eucalyptol depresses force development, probably acting as a calcium channel blocker.

Estudo da camada limite atmosférica em regiões metropolitanas costeiras com simulações de brisa marítima

O principal objetivo deste trabalho foi identificar e caracterizar a evolução diária da Camada Limite Atmosférica (CLA) na Região da Grande Vitória (RGV), Estado do Espírito Santo, Brasil e na Região de Dunkerque (RD), Departamento Nord Pas-de-Calais, França, avaliando a acurácia de parametrizações usadas no modelo meteorológico Weather Research and Forecasting (WRF) em detectar a formação e atributos da Camada Limite Interna (CLI) que é formada pelas brisas marítimas. A RGV tem relevo complexo, em uma região costeira de topografia acidentada e uma cadeia de montanhas paralela à costa. A RD tem relevo simples, em uma região costeira com pequenas ondulações que não chegam a ultrapassar 150 metros, ao longo do domínio de estudos. Para avaliar os resultados dos prognósticos feitos pelo modelo, foram utilizados os resultados de duas campanhas: uma realizada na cidade de Dunkerque, no norte da França, em Julho de 2009, utilizando um sistema light detection and ranging (LIDAR), um sonic detection and ranging (SODAR) e dados de uma estação meteorológica de superfície (EMS); outra realizada na cidade de Vitória – Espírito Santo, no mês de julho de 2012, também usando um LIDAR, um SODAR e dados de uma EMS. Foram realizadas simulações usando três esquemas de parametrizações para a CLA, dois de fechamento não local, Yonsei University (YSU) e Asymmetric Convective Model 2 (ACM2) e um de fechamento local, Mellor Yamada Janjic (MYJ) e dois esquemas de camada superficial do solo (CLS), Rapid Update Cycle (RUC) e Noah. Tanto para a RGV quanto para a RD, foram feitas simulações com as seis possíveis combinações das três parametrizações de CLA e as duas de CLS, para os períodos em que foram feitas as campanhas, usando quatro domínios aninhados, sendo os três maiores quadrados com dimensões laterais de 1863 km, 891 km e 297 km, grades de 27 km, 9 km e 3 km, respectivamente, e o domínio de estudo, com dimensões de 81 km na direção Norte-Sul e 63 km na Leste-Oeste, grade de 1 km, com 55 níveis verticais, até um máximo de, aproximadamente, 13.400 m, mais concentrados próximos ao solo. Os resultados deste trabalho mostraram que: a) dependendo da configuração adotada, o esforço computacional pode aumentar demasiadamente, sem que ocorra um grande aumento na acurácia dos resultados; b) para a RD, a simulação usando o conjunto de parametrizações MYJ para a CLA com a parametrização Noah produziu a melhor estimativa captando os fenômenos da CLI. As simulações usando as parametrizações ACM2 e YSU inferiram a entrada da brisa com atraso de até três horas; c) para a RGV, a simulação que usou as parametrizações YSU para a CLA em conjunto com a parametrização Noah para CLS foi a que conseguiu fazer melhores inferências sobre a CLI. Esses resultados sugerem a necessidade de avaliações prévias do esforço computacional necessário para determinadas configurações, e sobre a acurácia de conjuntos de parametrizações específicos para cada região pesquisada. As diferenças estão associadas com a capacidade das diferentes parametrizações em captar as informações superficiais provenientes das informações globais, essenciais para determinar a intensidade de mistura turbulenta vertical e temperatura superficial do solo, sugerindo que uma melhor representação do uso de solo é fundamental para melhorar as estimativas sobre a CLI e demais parâmetros usados por modelos de dispersão de poluentes atmosféricos.

Efeito da adição de óleo essencial de pimenta rosa (Schinus terebinthifolius Raddi) microencapsulado em queijo minas frescal

A pimenta rosa é o fruto da aroeira (Schinus terebinthifolius Raddi), uma planta nativa do Brasil. A extração e caracterização do seu óleo essencial viabiliza a sua utilização industrial. Este trabalho teve como objetivo avaliar o efeito da adição de óleo essencial de pimenta rosa em queijo Minas Frescal . Foram identificados 95,36% dos constituintes do óleo essencial, sendo o δ-careno-3 o componente majoritário. O óleo essencial de pimenta rosa apresentou características antioxidante (2,53 ± 0,28 μmols de trolox por mL de óleo) e antimicrobiana para o desenvolvimento de Staphylococcus aureus. Foi observado, no teste de difusão em ágar, a formação do halo de inibição de 1,35 ± 0,32 cm, e na análise de concentração inibitória mínima, o valor de 3,13%. O óleo essencial é sensível à degradação no meio em que se encontra, portanto necessita de processos tecnológicos para assegurar sua ação. Para proteger o óleo essencial foi realizada a microencapsulação por meio da secagem por spray dryer. O óleo foi microencapsulado utilizando três formulações com diferentes concentrações de goma arábica, maltodextrina e amido modificado como papel de parede. As microcápsulas obtidas foram analisadas quanto às suas características físico-químicas e morfológicas e foi selecionada uma formulação para posterior adição ao queijo Minas Frescal. A formulação com 5% de amido modificado, 10% de maltodextrina e 5% de goma arábica foi selecionada. Para definição da concentração de óleo essencial que foi utilzada no queijo, foi realizado teste sensorial de ordenação-preferência, visto que a concentração inibitória mínima (3,13%) era muito alta para ser utilizada nos queijos. A formulação com 0,01% de óleo essencial foi a preferida e utilizada para fabricação dos queijos. Foram elaborados e caracterizados os queijos controle (CO) e o queijo com adição das microcápsulas de óleo essencial de pimenta rosa (OEPR). Em relação às características físico-químicas, os queijos CO e OEPR só apresentaram diferença significativa em relação à umidade (P= 0,0021; α=0,05). O queijo OEPR teve boa aceitação sensorial com média de aceitação global de 7,6 ± 0,97, não apresentando diferença significativa, ao nível de 95% de confiança, do queijo controle (7,6 ± 1,18). Para avaliar a capacidade do óleo essencial de pimenta rosa microencapsulado em inibir o desenvolvimento de S. aureus, foram inoculadas nos queijos CO e OEPR concentrações iniciais de 106 UFG.g. Os queijos foram armazenados em BOD à temperatura de 4 ± 1 °C até realização das análises, que ocorreram nos tempos: 0, 3, 6, 9, 12, 15 e 30 dias. Houve redução de 1,53 ciclos Log no queijo adicionado de óleo essencial de pimenta rosa. De acordo com os resultados obtidos, conclui-se que o óleo essencial de pimenta rosa é uma alternativa viável de utilização em queijo Minas Frescal , devido ao seu potencial antioxidante, antimicrobiano e à sua aceitação sensorial.

Formação docente no Espírito Santo : diálogos com a pesquisa “Trabalho docente na educação básica no Brasil”

Esta dissertação objetiva analisar as compreensões dos profissionais da educação dos anos finais do Ensino Fundamental e do Ensino Médio da rede estadual dos municípios Guarapari, Nova Venécia, Viana e Vitória, sobre os seus processos de formação inicial e continuada na interface com as dimensões constitutivas da identidade e das condições de trabalho docente, a partir do banco de dados do Espírito Santo relativos à pesquisa “Trabalho Docente na Educação Básica no Brasil”, realizada em 2009, em sete Estados, incluído este, sob a coordenação geral do Grupo de Estudos sobre Políticas Educacionais e Trabalho Docente da Universidade Federal de Minas Gerais. A hipótese em discussão é que as políticas públicas educacionais implantadas no Espírito Santo nas últimas décadas têm promovido mudanças nas dimensões constitutivas da identidade e das condições de trabalho docente e também na formação dos profissionais da educação, implicando a baixa participação desses sujeitos em atividades e programas de formação continuada. Trata-se de um estudo quali-quantitativo no qual a metodologia consiste no intercruzamento dos dados coletados pelo survey da referida pesquisa, indicadores da identidade, perfil e condição de trabalho docente com os indicadores de formação. Os dados produzidos dialogaram com a produção teórica dos interlocutores Dubar, Nóvoa, Oliveira, Tardif e, Tardif, Lessard, além do aporte proveniente dos autores contemplados na revisão de literatura. Os resultados deste estudo indicam que a participação dos sujeitos da amostra em processos de formação continuada foi ainda menos expressiva do que a constatada no Espírito Santo e no Brasil, e que a centralidade adquirida pelo professor e seus processos de formação inicial e continuada não significou valorização profissional e condições adequadas de trabalho tidas como dimensões indissociáveis e igualmente importantes para alçar melhoria na qualidade da Educação Básica, a exemplo da predominância de baixos salários, apesar de a maioria dos participantes ser pós-graduada, do trabalho em mais de duas unidades educacional e da falta de apoio/orientação para o trabalho com alunos com necessidades especiais. Esses resultados vão de encontro às compreensões dos professores visto que, embora eles tenham reconhecido o seu papel como fundamental, não consideraram “receber mais” “capacitação para a atividade que exerce” entre as três medidas mais importantes para melhorar a qualidade do trabalho.

Tradutor das galáxias : questões de competência tradutória da cultura pop em webcomics

Dissertação (mestrado)—Universidade de Brasília, Instituto de Letras, Departamento de Línguas Estrangeiras e Tradução, Programa de Pós-Graduação em Estudos da Tradução, 2016.

The essential role of democracy in the Bush Doctrine: the invasions of Iraq and Afghanistan

Everyone knows that democracy played a role in the Bush Doctrine. What not everyone knows is that this role was essential for the doctrine to be put into operation under which the Iraq invasion was prepared and launched. We argue moreover that, even if aggressive, the Bush doctrine is compatible with the American Liberal Tradition. To demonstrate these arguments we analyze the links between democracy, security, and the US national interests as expressed in the pillars of the American foreign policy since the end of Cold War. The consequential belief of the Bush Administration on the positive effect of exporting democracy by the use of force to Afghanistan and Iraq to fight terrorism will be remarked. It will be shown, however, that in the first years of the Bush Administration, among the justifications for the military interventions in the two countries, security reasons prevailed over democratic concerns, although the latter was significantly present since the early hours after September 11. It was only when it became clear that WMDs did not exist in Iraq that the exporting of democracy as the ultimate weapon to fight terrorism grew remarkably and prevailed over security reasons to invade those rogue states. The paper uses quantitative and qualitative content analysis of the speeches of President Bush and his Secretaries of State and Defense.

Influence of leaf retention on cutting propagation of Lavandula dentata L.

Vegetative propagation of lavender offers several advantages over sexual propagation, among them crop homogeneity and yield of higher quality essential oil. However, Lavandula species have been propagated mostly by seeds and are said to be recalcitrant to rooting when propagated by cuttings. During cutting propagation, one of the important variables that influence the rooting capacity of cuttings is the leaf retention. The objective of this work was to evaluate the influence of leaf retention on rooting of L. dentata cuttings. Apical cuttings of L. dentata of 10 cm in length, keeping approximately 1/3, 1/2 or 2/3 of their leaves were planted in commercial substrate Plantmax HT® under intermittent mist. After two months, averages of root number, length of the longest root, root fresh and dry weights, and the survival percentage were evaluated. Root length and fresh weight were statistically greater with 2/3 of leaf retention and when fewer leaves were kept on the cuttings, lower means of root dry weight was observed. Under the conditions applied in this study, greater leaf retention was better for rooting of L. dentata cuttings.

Application to quantify fetal lung branching on rat explants

Recently, regulating mechanisms of branching morphogenesis of fetal lung rat explants have been an essential tool for molecular research. The development of accurate and reliable segmentation techniques may be essential to improve research outcomes. This work presents an image processing method to measure the perimeter and area of lung branches on fetal rat explants. The algorithm starts by reducing the noise corrupting the image with a pre-processing stage. The outcome is input to a watershed operation that automatically segments the image into primitive regions. Then, an image pixel is selected within the lung explant epithelial, allowing a region growing between neighbouring watershed regions. This growing process is controlled by a statistical distribution of each region. When compared with manual segmentation, the results show the same tendency for lung development. High similarities were harder to obtain in the last two days of culture, due to the increased number of peripheral airway buds and complexity of lung architecture. However, using semiautomatic measurements, the standard deviation was lower and the results between independent researchers were more coherent

Combining Formal Methods and Functional Strategies Regarding the Reverse Engineering of Interactive Applications

Abstract. Graphical user interfaces (GUIs) make software easy to use by providing the user with visual controls. Therefore, correctness of GUI’s code is essential to the correct execution of the overall software. Models can help in the evaluation of interactive applications by allowing designers to concentrate on its more important aspects. This paper describes our approach to reverse engineer an abstract model of a user interface directly from the GUI’s legacy code. We also present results from a case study. These results are encouraging and give evidence that the goal of reverse engineering user interfaces can be met with more work on this technique.

Spatial variability of particle size fractions of an Oxisol cultivated with conilon coffee

Information on the spatial distribution of particle size fractions is essential for use planning and management of soils. The aim of this work to was to study the spatial variability of particle size fractions of a Typic Hapludox cultivated with conilon coffee. The soil samples were collected at depths of 0-0.20 and 0.20-0.40 m in the coffee canopy projection, totaling 109 georeferentiated points. At the depth of 0.2-0.4 m the clay fraction showed average value significantly higher, while the sand fraction showed was higher in the depth of 0-0.20 m. The silt showed no significant difference between the two depths. The particle size fractions showed medium and high spatial variability. The levels of total sand and clay have positive and negative correlation, respectively, with the altitude of the sampling points, indicating the influence of landscape configuration.

Automated image analysis of lung branching morphogenesis from microscopic images of fetal rat explants

Background: Regulating mechanisms of branching morphogenesis of fetal lung rat explants have been an essential tool for molecular research. This work presents a new methodology to accurately quantify the epithelial, outer contour and peripheral airway buds of lung explants during cellular development from microscopic images. Methods: The outer contour was defined using an adaptive and multi-scale threshold algorithm whose level was automatically calculated based on an entropy maximization criterion. The inner lung epithelial was defined by a clustering procedure that groups small image regions according to the minimum description length principle and local statistical properties. Finally, the number of peripheral buds were counted as the skeleton branched ends from a skeletonized image of the lung inner epithelial. Results: The time for lung branching morphometric analysis was reduced in 98% in contrast to the manual method. Best results were obtained in the first two days of cellular development, with lesser standard deviations. Non-significant differences were found between the automatic and manual results in all culture days. Conclusions: The proposed method introduces a series of advantages related to its intuitive use and accuracy, making the technique suitable to images with different lightning characteristics and allowing a reliable comparison between different researchers.

Automated image analysis of lung branching morphogenesis

Regulating mechanisms of branchingmorphogenesis of fetal lung rat explants have been an essential tool formolecular research.This work presents a new methodology to accurately quantify the epithelial, outer contour, and peripheral airway buds of lung explants during cellular development frommicroscopic images. Methods.Theouter contour was defined using an adaptive and multiscale threshold algorithm whose level was automatically calculated based on an entropy maximization criterion. The inner lung epithelium was defined by a clustering procedure that groups small image regions according to the minimum description length principle and local statistical properties. Finally, the number of peripheral buds was counted as the skeleton branched ends from a skeletonized image of the lung inner epithelia. Results. The time for lung branching morphometric analysis was reduced in 98% in contrast to themanualmethod. Best results were obtained in the first two days of cellular development, with lesser standard deviations. Nonsignificant differences were found between the automatic and manual results in all culture days. Conclusions. The proposed method introduces a series of advantages related to its intuitive use and accuracy, making the technique suitable to images with different lighting characteristics and allowing a reliable comparison between different researchers.

Application to quantify fetal lung branching on rat explant

Recently, regulating mechanisms of branching morphogenesis of fetal lung rat explants have been an essential tool for molecular research. The development of accurate and reliable segmentation techniques may be essential to improve research outcomes. This work presents an image processing method to measure the perimeter and area of lung branches on fetal rat explants. The algorithm starts by reducing the noise corrupting the image with a pre-processing stage. The outcome is input to a watershed operation that automatically segments the image into primitive regions. Then, an image pixel is selected within the lung explant epithelial, allowing a region growing between neighbouring watershed regions. This growing process is controlled by a statistical distribution of each region. When compared with manual segmentation, the results show the same tendency for lung development. High similarities were harder to obtain in the last two days of culture, due to the increased number of peripheral airway buds and complexity of lung architecture. However, using semiautomatic measurements, the standard deviation was lower and the results between independent researchers were more coherent.

Preliminary clinical trial in percutaneous nephrolithotomy using a real-time navigation system for percutaneous kidney access

Background: Precise needle puncture of renal calyces is a challenging and essential step for successful percutaneous nephrolithotomy. This work tests and evaluates, through a clinical trial, a real-time navigation system to plan and guide percutaneous kidney puncture. Methods: A novel system, entitled i3DPuncture, was developed to aid surgeons in establishing the desired puncture site and the best virtual puncture trajectory, by gathering and processing data from a tracked needle with optical passive markers. In order to navigate and superimpose the needle to a preoperative volume, the patient, 3D image data and tracker system were previously registered intraoperatively using seven points that were strategically chosen based on rigid bone structures and nearby kidney area. In addition, relevant anatomical structures for surgical navigation were automatically segmented using a multi-organ segmentation algorithm that clusters volumes based on statistical properties and minimum description length criterion. For each cluster, a rendering transfer function enhanced the visualization of different organs and surrounding tissues. Results: One puncture attempt was sufficient to achieve a successful kidney puncture. The puncture took 265 seconds, and 32 seconds were necessary to plan the puncture trajectory. The virtual puncture path was followed correctively until the needle tip reached the desired kidney calyceal. Conclusions: This new solution provided spatial information regarding the needle inside the body and the possibility to visualize surrounding organs. It may offer a promising and innovative solution for percutaneous punctures.

Validation of percutaneous puncture trajectory during renal access using 4D ultrasound reconstruction

Background: An accurate percutaneous puncture is essential for disintegration and removal of renal stones. Although this procedure has proven to be safe, some organs surrounding the renal target might be accidentally perforated. This work describes a new intraoperative framework where tracked surgical tools are superimposed within 4D ultrasound imaging for security assessment of the percutaneous puncture trajectory (PPT). Methods: A PPT is first generated from the skin puncture site towards an anatomical target, using the information retrieved by electromagnetic motion tracking sensors coupled to surgical tools. Then, 2D ultrasound images acquired with a tracked probe are used to reconstruct a 4D ultrasound around the PPT under GPU processing. Volume hole-filling was performed in different processing time intervals by a tri-linear interpolation method. At spaced time intervals, the volume of the anatomical structures was segmented to ascertain if any vital structure is in between PPT and might compromise the surgical success. To enhance the volume visualization of the reconstructed structures, different render transfer functions were used. Results: Real-time US volume reconstruction and rendering with more than 25 frames/s was only possible when rendering only three orthogonal slice views. When using the whole reconstructed volume one achieved 8-15 frames/s. 3 frames/s were reached when one introduce the segmentation and detection if some structure intersected the PPT. Conclusions: The proposed framework creates a virtual and intuitive platform that can be used to identify and validate a PPT to safely and accurately perform the puncture in percutaneous nephrolithotomy.