Juvenile–adult tree associations in a continental Mediterranean ecosystem: no evidence for sustained and general facilitation at increased aridity

Question: How do tree species identity, microhabitat and water availability affect inter- and intra-specific interactions between juvenile and adult woody plants? Location: Continental Mediterranean forests in Alto Tajo Natural Park, Guadalajara, Spain. Methods: A total of 2066 juveniles and adults of four co-occurring tree species were mapped in 17 plots. The frequency of juveniles at different microhabitats and water availability levels was analysed using log-linear models. We used nearest-neighbour contingency table analysis of spatial segregation and J-functions to describe the spatial patterns. Results: We found a complex spatial pattern that varied according to species identity and microhabitat. Recruitment was more frequent in gaps for Quercus ilex, while the other three species recruited preferentially under shrubs or trees depending on the water availability level. Juveniles were not spatially associated to conspecific adults, experiencing segregation from them inmany cases. Spatial associations, both positive and negative, were more common at higher water availability levels. Conclusions: Our results do not agree with expectations from the stressgradient hypothesis, suggesting that positive interactions do not increase in importance with increasing aridity in the study ecosystem. Regeneration patterns are species-specific and depend on microhabitat characteristics and dispersal strategies. In general, juveniles do not look for conspecific adult protection. This work contributes to the understanding of species co-existence, proving the importance of considering a multispecies approach at several plots to overcome limitations of simple pair-wise comparisons in a limited number of sites.

Integrating periurban agrarian ecosystem services into spatial planning to cope with urban pressure

According to Corine Land Cover databases, in Europe between 1990 and 2000,77% of new artificial surfaces were built on previous agrarian areas. Urban sprawl ¡s far from being under control, between 2000 and 2006 new artificial land has grown in larger proportion than the decade before. In Spain, like in most countries, the impact of urban sprawl during the last decades has been especially significant in periurban agrarian spaces: between 2000 and 2006, 73% of new artificial surfaces were built on previous agrarian areas. The indirect impact of this trend has been even more relevant, as the expectations of appreciation in the value of land after new urban developments reinforce the ongoing trend of abandonment of agricultural land. In Madrid between 1980 and 2000 the loss of agricultural land due to abandonment of exploitation was 2-fold that due to transformation into urban areas. By comparing four case studies: Valladolild, Montpellier.Florence and Den Haag, this paper explores if urban and territorial planning may contribute to reduce urban pressure on the hinterland. In spite of their diversity, these regions have in common a relative prosperity arising from their territorial endowments, though their landscapes are still under pressure. The three last ones have been working for years on mainstream concepts like multifunctional agriculture. The systematic comparison and the analysis of successful approaches provide some clues on how to reconsider urban planning in order to preserve agricultural land. The final remarks highlight the context in which public commitment, legal protection instruments and financial strategies may contribute to the goals of urban, peri-urban or regional planning about fostering agrarian ecosystem services

Opportunities and challenges in the mobile media ecosystem

Increasing availability (andaffordability) of mobile broadband - In 2015 half of the subscriber base will be in 3G/4G, and 80% in 2020 (27% in 2011) - 7.6 billion mobile users by 2020 (5.4 billion in 2011). Mobile subscribers per 100 inhabitants:99%. Increasing availability (and affordability) of smartphones - In 2020 81% of phones sold globally will be smartphones (2.5 billion) from 26% in 2011 (400 million) - 595 million tablets in 2020 (70 million in 2011)

MPEG-M: A Digital Media Ecosystem for Interoperable Applications

MPEG-M is a suite of ISO/IEC standards (ISO/IEC 23006) that has been developed under the auspices of Moving Picture Experts Group (MPEG). MPEG-M, also known as Multimedia Service Platform Technologies (MSPT), facilitates a collection of multimedia middleware APIs and elementary services as well as service aggregation so that service providers can offer users a plethora of innovative services by extending current IPTV technology toward the seamless integration of personal content creation and distribution, e-commerce, social networks and Internet distribution of digital media.

Rheological behaviour and functionality of inulin-extra virgin olive oil-based mashed potatoes

Developing products having a high nutritional value and good storage stability during freezing is a challenge. Inulin (I) and extra virgin olive oil (EVOO) have interesting functional properties. The e?ect of the addition of I and EVOO blends at di?erent I:EVOO ratios (0:0, 0:60, 15:45, 30:30, 45:15, 60:0, 30:45 and 45:30) on the rheological, physical, sensory and structural properties of fresh and frozen ? thawed mashed potatoes formulated without and with added cryoprotectants was analysed and compared. Addition of I and EVOO (either alone or blended) reduced apparent viscosity and pseudoplasticity producing softer systems, indicating that both ingredients behave as soft ?llers. Samples with added I at the higher concentrations )1 (?45 g kg ) showed lower ?ow index and consistency, which is related to formation of smaller I particles; microphotographs indicated that gelling properties of I depended mostly upon processing. Frozen ? thawed samples were judged more acceptable and creamier than their fresh counterparts.

Hardening digital systems with distributed functionality: robust networks

Collaborative hardening and hardware redundancy are nowadays the most interesting solutions in terms of fault tolerance achieved and low extra cost imposed to the project budget. Thanks to the powerful and cheap digital devices that are available in the market, extra processing capabilities can be used for redundant tasks, not only in early data processing (sensed data) but also in routing and interfacing1

On the importance of shrub encroachment by sprouters, climate, species richness and anthropic factors for ecosystem multifunctionality in semi-arid Mediterranean ecosystems

One of the most important changes taking place in drylands worldwide is the increase of the cover and dominance of shrubs in areas formerly devoid of them (shrub encroachment). A large body of research has evaluated the causes and consequences of shrub encroachment for both ecosystem structure and functioning. However, there are virtually no studies evaluating how shrub encroachment affects the ability of ecosystems to maintain multiple functions and services simultaneously (multifunctionality). We aimed to do so by gathering data from ten ecosystem functions linked to the maintenance of primary production and nutrient cycling and storage (organic C, activity of β-glucosidase, pentoses, hexoses, total N, total available N, amino acids, proteins, available inorganic P, and phosphatase activity), and summarizing them in a multifunctionality index (M). We assessed how climate, species richness, anthropic factors (distance to the nearest town, sandy and asphalted road, and human population in the nearest town at several historical periods) and encroachment by sprouting shrubs impacted both the functions in isolation and M along a regional (ca. 350 km) gradient in Mediterranean grasslands and shrublands dominated by a non-sprouting shrub. Values of M were higher in those grasslands and shrublands containing sprouting shrubs (43 and 62%, respectively). A similar response was found when analyzing the different functions in isolation, as encroachment by sprouting shrubs increased functions by 2–80% compared to unencroached areas. Encroachment was the main driver of changes in M along the regional gradient evaluated, followed by anthropic factors and species richness. Climate had little effects on M in comparison to the other factors studied. Similar responses were observed when evaluating the functions in isolation. Overall, our results showed that M was higher at sites with higher sprouting shrub cover, longer distance to roads and higher perennial plant species richness. Our study is the first documenting that ecosystem multifunctionality in shrublands is enhanced by encroaching shrubs differing in size and leaf attributes. Our findings reinforce the idea that encroachment effects on ecosystem functioning cannot be generalized, and that are largely dependent on the traits of the encroaching shrub relative to those of the species being replaced.

Co-creación de semiconductores

El mercado de los semiconductores está saturado de productos similares y de distribuidores con una propuesta de servicios similar. Los procesos de Co-Creación en los que el cliente colabora en la definición y desarrollo del producto y proporciona información sobre su utilidad, prestaciones y valor percibido, con el resultado de un producto que soluciona sus necesidades reales, se están convirtiendo en un paso adelante en la diferenciación y expansión de la cadena de valor. El proceso de diseño y fabricación de semiconductores es bastante complejo, requiere inversiones cada vez mayores y demanda soluciones completas. Se requiere un ecosistema que soporte el desarrollo de los equipos electrónicos basados en dichos semiconductores. La facilidad para el diálogo y compartir información que proporciona internet, las herramientas basadas en web 2.0 y los servicios y aplicaciones en la nube; favorecen la generación de ideas, el desarrollo y evaluación de productos y posibilita la interacción entre diversos co-creadores. Para iniciar un proceso de co-creación se requiere métodos y herramientas adecuados para interactuar con los participantes e intercambiar experiencias, procesos para integrar la co-creación dentro de la operativa de la empresa, y desarrollar una organización y cultura que soporten y fomenten dicho proceso. Entre los métodos más efectivos están la Netnografía que estudia las conversaciones de las comunidades en internet; colaboración con usuarios pioneros que van por delante del Mercado y esperan un gran beneficio de la satisfacción de sus necesidades o deseos; los estudios de innovación que permiten al usuario definir y a menudo crear su propia solución y la externalización a la multitud, que mediante una convocatoria abierta plantea a la comunidad retos a resolver a cambio de algún tipo de recompensa. La especialización de empresas subcontratistas en el desarrollo y fabricación de semiconductores; facilita la innovación abierta colaborando con diversas entidades en las diversas fases del desarrollo del semiconductor y su ecosistema. La co-creación se emplea actualmente en el sector de los semiconductores para detectar ideas de diseños y aplicaciones, a menudo mediante concursos de innovación. El servicio de soporte técnico y la evaluación de los semiconductores con frecuencia es fruto de la colaboración entre los miembros de la comunidad fomentada y soportada por los fabricantes del producto. Con el programa EBVchips se posibilita el acceso a empresas pequeñas y medianas a la co-creación de semiconductores con los fabricantes en un proceso coordinado y patrocinado por el distribuidor EBV. Los semiconductores configurables como las FPGAs constituyen otro ejemplo de co-creación mediante el cual el fabricante proporciona el circuito integrado y el entorno de desarrollo y los clientes crean el producto final definiendo sus características y funcionalidades. Este proceso se enriquece con bloques funcionales de diseño, IP-cores, que a menudo son creados por la comunidad de usuarios. ABSTRACT. The semiconductor market is saturated of similar products and distributors with a similar proposal for services. The processes of co-creation in which the customer collaborates in the definition and development of the product and provides information about its utility, performance and perceived value, resulting in a product that solves their real needs, are becoming a step forward in the differentiation and expansion of the value chain. The design and semiconductor manufacturing process is quite complex, requires increasingly higher investments and demands complete solutions. It requires an ecosystem that supports the development of electronic equipments based on such semiconductors. The ease of dialogue and sharing information that provides internet, web 2.0-based tools and services and applications in the cloud; favor the generation of ideas, the development and evaluation of products and allows the interaction between various co-creators. To start a process of co-creation adequate methods and tools are required to interact with the participants and exchange experiences, processes to integrate the co-creation within the operations of the company, and developing an organization and culture that support and promote such process. Among the most effective methods are the Netnography that studies the conversations of the communities on the internet; collaboration with Lead Users who are ahead of the market and expect a great benefit from the satisfaction of their needs or desires; Innovation studies that allow the user to define and often create their own solution and Crowdsourcing, an open call to the community to solve challenges in exchange for some kind of reward. The specialization of subcontractors in the development and manufacture of semiconductors; facilitates open innovation in the context of collaboration with different entities working in the different phases of the development of the semiconductor and its ecosystem. Co-creation is used currently in the semiconductor sector to detect ideas of designs and applications, often through innovation’s contests. Technical support and evaluation of semiconductors frequently is the result of collaboration between members of the community fostered and supported by the manufacturers of the product. The EBVchips program provides access to small and medium-sized companies to the co-creation of semiconductors with manufacturers in a process coordinated and sponsored by the Distributor EBV. Configurable semiconductors like FPGAs are another example of co-creation whereby the manufacturer provides the integrated circuit and the development environment and customers create the final product by defining their features and functionality. This process is enriched with IP-cores, designs blocks that are often created by the user community.

Global research alliance modelling platform (GRAMP): an open web platform for modelling greenhouse gas emissions from agro-ecosystems

Carbon (C) and nitrogen (N) process-based models are important tools for estimating and reporting greenhouse gas emissions and changes in soil C stocks. There is a need for continuous evaluation, development and adaptation of these models to improve scientific understanding, national inventories and assessment of mitigation options across the world. To date, much of the information needed to describe different processes like transpiration, photosynthesis, plant growth and maintenance, above and below ground carbon dynamics, decomposition and nitrogen mineralization. In ecosystem models remains inaccessible to the wider community, being stored within model computer source code, or held internally by modelling teams. Here we describe the Global Research Alliance Modelling Platform (GRAMP), a web-based modelling platform to link researchers with appropriate datasets, models and training material. It will provide access to model source code and an interactive platform for researchers to form a consensus on existing methods, and to synthesize new ideas, which will help to advance progress in this area. The platform will eventually support a variety of models, but to trial the platform and test the architecture and functionality, it was piloted with variants of the DNDC model. The intention is to form a worldwide collaborative network (a virtual laboratory) via an interactive website with access to models and best practice guidelines; appropriate datasets for testing, calibrating and evaluating models; on-line tutorials and links to modelling and data provider research groups, and their associated publications. A graphical user interface has been designed to view the model development tree and access all of the above functions.

Edaphic controls on ecosystem-level carbon allocation in two contrasting Amazon forests

Three components of carbon allocation, biomass, flux, and partitioning, were measured in two contrasting Amazon forests growing under similar climatic conditions. Allocation to aboveground compartments was highest in a high-stature forest growing on clay soils, while allocation to fine roots was higher in a short-stature forest growing on white sands. Differences in carbon allocation components where not proportional between the two forests, with soils controlling a trade-off between allocation to fine roots versus aboveground parts.

Stem CO2 efflux and its contribution to ecosystem CO2 efflux decrease with drought in a Mediterranean forest stand

tThe rate of metabolic processes demanding energy in tree stems changes in relation with prevailing cli-matic conditions. Tree water availability can affect stem respiration through impacts on growth, phloemtransport or maintenance of diverse cellular processes, but little is known on this topic. Here we moni-tored seasonal changes in stem CO2efflux (Fs), radial growth, sap flow and non-structural carbohydrates intrees of Quercus ilex in a Mediterranean forest stand subjected since 2003 to either partial (33%) through-fall exclusion (E) or unchanged throughfall (C). Fsincreased exponentially during the day by an effectof temperature, although sap flow attenuated the increase in Fsduring the day time. Over the year, Fsalso increased exponentially with increasing temperatures, but Fscomputed at a standard temperatureof 15?C (F15s) varied by almost 4-fold among dates. F15swas the highest after periods of stem growth anddecreased as tree water availability decreased, similarly in C and E treatments. The decline in F15swas notlinked to a depletion of soluble sugars, which increased when water stress was higher. The proportionof ecosystem respiration attributed to the stems was highest following stem growth (23.3%) and lowestduring the peak of drought (6.5%). High within-year variability in F15smakes unadvisable to pool annualdata of Fsvs. temperature to model Fsat short time scales (hours to months) in Mediterranean-type for-est ecosystems. We demonstrate that water availability is an important factor governing stem CO2effluxand suggest that trees in Mediterranean environments acclimate to seasonal drought by reducing stemrespiration. Stem respiratory rates do not seem to change after a long-term increase in drought intensity,however.

Modelización de servicios ecosistémicos en una cuenca hidrológica del área mediterránea = Modeling ecosystem services in a mediterranean area river basin

La modelización es un proceso por el que se obtienen modelos de los procesos del ´mundo real´ mediante la utilización de simplificaciones. Sin embargo, las estimaciones obtenidas con el modelo llevan implícitas incertidumbre que se debe evaluar. Mediante un análisis de sensibilidad se puede mejorar la confianza en los resultados, sin embargo, este paso a veces no se realiza debido básicamente al trabajo que lleva consigo este tipo de análisis. Además, al crear un modelo, hay que mantener un equilibrio entre la obtención de resultados lo más exactos posible mediante un modelo lo más sencillo posible. Por ello, una vez creado un modelo, es imprescindible comprobar si es necesario o no incluir más procesos que en un principio no se habían incluido. Los servicios ecosistémicos son los procesos mediante los cuales los ecosistemas mantienen y satisfacen el bienestar humano. La importancia que los servicios ecosistémicos y sus beneficios asociados tienen, junto con la necesidad de realizar una buena gestión de los mismos, han estimulado la aparición de modelos y herramientas para cuantificarlos. InVEST (Integrated Valuation of Ecosystem Services and Tradoffs) es una de estas herramientas específicas para calcular servicios eco-sistémicos, desarrollada por Natural Capital Project (Universidad de Stanford, EEUU). Como resultado del creciente interés en calcular los servicios eco-sistémicos, se prevé un incremento en la aplicación del InVEST. La investigación desarrollada en esta Tesis pretende ayudar en esas otras importantes fases necesarias después de la creación de un modelo, abarcando los dos siguientes trabajos. El primero es la aplicación de un análisis de sensibilidad al modelo en una cuenca concreta mediante la metodología más adecuada. El segundo es relativo a los procesos dentro de la corriente fluvial que actualmente no se incluyen en el modelo mediante la creación y aplicación de una metodología que estudiara el papel que juegan estos procesos en el modelo InVEST de retención de nutrientes en el área de estudio. Los resultados de esta Tesis contribuirán a comprender la incertidumbre involucrada en el proceso de modelado. También pondrá de manifiesto la necesidad de comprobar el comportamiento de un modelo antes de utilizarlo y en el momento de interpretar los resultados obtenidos. El trabajo en esta Tesis contribuirá a mejorar la plataforma InVEST, que es una herramienta importante en el ámbito de los servicios de los ecosistemas. Dicho trabajo beneficiará a los futuros usuarios de la herramienta, ya sean investigadores (en investigaciones futuras), o técnicos (en futuros trabajos de toma de decisiones o gestión ecosistemas). ABSTRACT Modeling is the process to idealize real-world situations through simplifications in order to obtain a model. However, model estimations lead to uncertainties that have to be evaluated formally. The role of the sensitivity analysis (SA) is to assign model output uncertainty based on the inputs and can increase confidence in model, however, it is often omitted in modelling, usually as a result of the growing effort it involves. In addition, the balance between accuracy and simplicity is not easy to assess. For this reason, when a model is developed, it is necessary to test it in order to understand its behavior and to include, if necessary, more complexity to get a better response. Ecosystem services are the conditions and processes through which natural ecosystems, and their constituent species, sustain and fulfill human life. The relevance of ecosystem services and the need to better manage them and their associated benefits have stimulated the emergence of models and tools to measure them. InVEST, Integrated Valuation of Ecosystem Services and Tradoffs, is one of these ecosystem services-specific tools developed by the Natural Capital Project (Stanford University, USA). As a result of the growing interest in measuring ecosystem services, the use of InVEST is anticipated to grow exponentially in the coming years. However, apart from model development, making a model involves other crucial stages such as its evaluation and application in order to validate estimations. The work developed in this thesis tries to help in this relevant and imperative phase of the modeling process, and does so in two different ways. The first one is to conduct a sensitivity analysis of the model, which consists in choosing and applying a methodology in an area and analyzing the results obtained. The second is related to the in-stream processes that are not modeled in the current model, and consists in creating and applying a methodology for testing the streams role in the InVEST nutrient retention model in a case study, analyzing the results obtained. The results of this Thesis will contribute to the understanding of the uncertainties involved in the modeling process. It will also illustrate the need to check the behavior of every model developed before putting them in production and illustrate the importance of understanding their behavior in terms of correctly interpreting the results obtained in light of uncertainty. The work in this thesis will contribute to improve the InVEST platform, which is an important tool in the field of ecosystem services. Such work will benefit future users, whether they are researchers (in their future research), or technicians (in their future work in ecosystem conservation or management decisions).

Water, agriculture and ecosystem services in climate change vulnerable agricultural regions of Spain and Jordan

Irrigated agricultural landscapes generate a valuable set of ecosystem services, which are threatened by water scarcity in many aridand semi‐arid regions of the world. In the Mediterranean region, climate change is expected to decrease water availability through reduced precipitation and more frequent drought spells. At the same time, climate change, demographic and economic development and an agricultural sector highly dependent on irrigation, will raise water demand, increasing experienced water scarcity and affecting the provision of ecosystem services from water resources and agro-ecosystems. In this context, policy makers face the challenge of balancing the provision of different ecosystem services, including agricultural income and production and also water ecosystem protection.

Analysing trade-offs between food production and ecosystem services in tropical forests of lowland Bolivia

The expansion of agricultural land is responsible for most tropical deforestation. Historically, smallholder farming and shifting cultivation has been reported as the main agent of deforestation. However, the increasing global demand for food in recent years has greatly boosted the development of medium and large-scale commercial agriculture which is nowadays causing the majority of tropical forest cover loss, particularly in Latin America.

Modelización de servicios ecosistémicos en una cuenca hidrológica del área mediterránea = Modeling ecosystem services in a mediterranean area river basin

La modelización es un proceso por el que se obtienen modelos de los procesos del ´mundo real´ mediante la utilización de simplificaciones. Sin embargo, las estimaciones obtenidas con el modelo llevan implícitas incertidumbre que se debe evaluar. Mediante un análisis de sensibilidad se puede mejorar la confianza en los resultados, sin embargo, este paso a veces no se realiza debido básicamente al trabajo que lleva consigo este tipo de análisis. Además, al crear un modelo, hay que mantener un equilibrio entre la obtención de resultados lo más exactos posible mediante un modelo lo más sencillo posible. Por ello, una vez creado un modelo, es imprescindible comprobar si es necesario o no incluir más procesos que en un principio no se habían incluido. Los servicios ecosistémicos son los procesos mediante los cuales los ecosistemas mantienen y satisfacen el bienestar humano. La importancia que los servicios ecosistémicos y sus beneficios asociados tienen, junto con la necesidad de realizar una buena gestión de los mismos, han estimulado la aparición de modelos y herramientas para cuantificarlos. InVEST (Integrated Valuation of Ecosystem Services and Tradoffs) es una de estas herramientas específicas para calcular servicios eco-sistémicos, desarrollada por Natural Capital Project (Universidad de Stanford, EEUU). Como resultado del creciente interés en calcular los servicios eco-sistémicos, se prevé un incremento en la aplicación del InVEST. La investigación desarrollada en esta Tesis pretende ayudar en esas otras importantes fases necesarias después de la creación de un modelo, abarcando los dos siguientes trabajos. El primero es la aplicación de un análisis de sensibilidad al modelo en una cuenca concreta mediante la metodología más adecuada. El segundo es relativo a los procesos dentro de la corriente fluvial que actualmente no se incluyen en el modelo mediante la creación y aplicación de una metodología que estudiara el papel que juegan estos procesos en el modelo InVEST de retención de nutrientes en el área de estudio. Los resultados de esta Tesis contribuirán a comprender la incertidumbre involucrada en el proceso de modelado. También pondrá de manifiesto la necesidad de comprobar el comportamiento de un modelo antes de utilizarlo y en el momento de interpretar los resultados obtenidos. El trabajo en esta Tesis contribuirá a mejorar la plataforma InVEST, que es una herramienta importante en el ámbito de los servicios de los ecosistemas. Dicho trabajo beneficiará a los futuros usuarios de la herramienta, ya sean investigadores (en investigaciones futuras), o técnicos (en futuros trabajos de toma de decisiones o gestión ecosistemas). ABSTRACT Modeling is the process to idealize real-world situations through simplifications in order to obtain a model. However, model estimations lead to uncertainties that have to be evaluated formally. The role of the sensitivity analysis (SA) is to assign model output uncertainty based on the inputs and can increase confidence in model, however, it is often omitted in modelling, usually as a result of the growing effort it involves. In addition, the balance between accuracy and simplicity is not easy to assess. For this reason, when a model is developed, it is necessary to test it in order to understand its behavior and to include, if necessary, more complexity to get a better response. Ecosystem services are the conditions and processes through which natural ecosystems, and their constituent species, sustain and fulfill human life. The relevance of ecosystem services and the need to better manage them and their associated benefits have stimulated the emergence of models and tools to measure them. InVEST, Integrated Valuation of Ecosystem Services and Tradoffs, is one of these ecosystem services-specific tools developed by the Natural Capital Project (Stanford University, USA). As a result of the growing interest in measuring ecosystem services, the use of InVEST is anticipated to grow exponentially in the coming years. However, apart from model development, making a model involves other crucial stages such as its evaluation and application in order to validate estimations. The work developed in this thesis tries to help in this relevant and imperative phase of the modeling process, and does so in two different ways. The first one is to conduct a sensitivity analysis of the model, which consists in choosing and applying a methodology in an area and analyzing the results obtained. The second is related to the in-stream processes that are not modeled in the current model, and consists in creating and applying a methodology for testing the streams role in the InVEST nutrient retention model in a case study, analyzing the results obtained. The results of this Thesis will contribute to the understanding of the uncertainties involved in the modeling process. It will also illustrate the need to check the behavior of every model developed before putting them in production and illustrate the importance of understanding their behavior in terms of correctly interpreting the results obtained in light of uncertainty. The work in this thesis will contribute to improve the InVEST platform, which is an important tool in the field of ecosystem services. Such work will benefit future users, whether they are researchers (in their future research), or technicians (in their future work in ecosystem conservation or management decisions).