¡QUE TENGA UN VERANO DIVERTIDO Y SEGURO! : PROTÉJASE de las PICADURAS DE MOSQUITOS

This sheet, printed in Spanish, tells how to prevent mosquito bites such as: Night or day, be prepared ; Use insect repellent ; Wear protective clothes ; Mosquito-proof your home.

Przestrzenne formy upamiętniania Zagłady

This book is a synthesizing reflection on the Holocaust commemoration, in which space becomes a starting point for discussion. The author understands space primarily as an amalgam of physical and social components, where various commemorative processes may occur. The first part of the book draws attention to the material aspect of space, which determines its character and function. Material culture has been a long ignored and depreciated dimension of human culture in the humanities and social sciences, because it was perceived as passive and fully controlled by human will, and therefore insignificant in the course of social and historical processes. An example of the Nazi system perfectly illustrates how important were the restrictions and prohibitions on the usage of mundane objects, and in general, the whole material culture in relation to macro and micro space management — the state, cities, neighborhoods and houses, but also parks and swimming pools, factories and offices or shops and theaters. The importance of things and space was also clearly visible in exploitative policies present in overcrowded ghettos and concentration and death camps. For this very reason, when we study spatial forms of Holocaust commemoration, it should be acknowledged that the first traces, proofs and mementoes of the murdered were their things. The first "monuments" showing the enormity of the destruction are thus primarily gigantic piles of objects — shoes, glasses, toys, clothes, suitcases, toothbrushes, etc., which together with the extensive camps’ space try to recall the scale of a crime impossible to understand or imagine. The first chapter shows the importance of introducing the material dimension in thinking about space and commemoration, and it ends with a question about one of the key concepts for the book, a monument, which can be understood as both object (singular or plural) and architecture (sculptures, buildings, highways). However, the term monument tends to be used rather in a later and traditional sense, as an architectural, figurative form commemorating the heroic deeds, carved in stone or cast in bronze. Therefore, the next chapter reconstructs this narrower line of thinking, together with a discussion about what form a monument commemorating a subject as delicate and sensitive as the Holocaust should take on. This leads to an idea of the counter-monument, the concept which was supposed to be the answer to the mentioned representational dilemma on the one hand, and which would disassociate it from the Nazi’s traditional monuments on the other hand. This chapter clarifies the counter-monument definition and explains the misunderstandings and confusions generated on the basis of this concept by following the dynamics of the new commemorative form and by investigating monuments from the ‘80s and ‘90s erected in Germany. In the next chapter, I examine various forms of the Holocaust commemoration in Berlin, a city famous for its bold, monumental, and even controversial projects. We find among them the entire spectrum of memorials – big, monumental, and abstract forms, like Peter Eisenman’s Memorial to the Murdered Jews of Europe or Daniel Liebeskind’s Jewish Museum Berlin; flat, invisible, and employing the idea of emptiness, like Christian Boltanski’s Missing House or Micha Ullman’s Book Burning Memorial; the dispersed and decentralized, like Renata Stih and Frieder Schnock’s Memory Places or Gunter Demnig’s Stumbling Blocks. I enrich descriptions of the monuments by signaling at this point their second, extended life, which manifests itself in the alternative modes of (mis)use, consisting of various social activities or artistic performances. The formal wealth of the outlined projects creates a wide panorama of possible solutions to the Holocaust commemoration problems. However, the discussions accompanying the building of monuments and their "future life" after realization emphasize the importance of the social component that permeates the biography of the monument, and therefore significantly influences its foreseen design. The book also addresses the relationship of space, place and memory in a specific situation, when commemoration is performed secretly or remains as unrealized potential. Although place is the most common space associated with memory, today the nature of this relationship changes, and is what indicates popularity and employment of such terms as Marc Augé’s non-places or Pierre Nora’s site of memory. I include and develop these concepts about space and memory in my reflections to describe qualitatively different phenomena occurring in Central and Eastern European countries. These are unsettling places in rural areas like glades or parking lots, markets and playgrounds in urban settings. I link them to the post-war time and modernization processes and call them sites of non-memory and non-sites of memory. Another part of the book deals with a completely different form of commemoration called Mystery of memory. Grodzka Gate - NN Theatre in Lublin initiated it in 2000 and as a form it situates itself closer to the art of theater than architecture. Real spaces and places of everyday interactions become a stage for these performances, such as the “Jewish town” in Lublin or the Majdanek concentration camp. The minimalist scenography modifies space and reveals its previously unseen dimensions, while the actors — residents and people especially related to places like survivors and Righteous Among the Nations — are involved in the course of the show thanks to various rituals and symbolic gestures. The performance should be distinguished from social actions, because it incorporates tools known from religious rituals and art, which together saturate the mystery of memory with an aura of uniqueness. The last discussed commemoration mode takes the form of exposition space. I examine an exhibition concerning the fate of the incarcerated children presented in one of the barracks of the Majdanek State Museum in Lublin. The Primer – Children in Majdanek Camp is unique for several reasons. First, because even though it is exhibited in the camp barrack, it uses a completely different filter to tell the story of the camp in comparison to the exhibitions in the rest of the barracks. For this reason, one experiences immersing oneself in all subsequent levels of space and narrative accompanying them – at first, in a general narrative about the camp, and later in a specifically arranged space marked by children’s experiences, their language and thinking, and hence formed in a way more accessible for younger visitors. Second, the exhibition resigns from didacticism and distancing descriptions, and takes an advantage of eyewitnesses and survivors’ testimonies instead. Third, the exhibition space evokes an aura of strangeness similar to a fairy tale or a dream. It is accomplished thanks to the arrangement of various, usually highly symbolic material objects, and by favoring the fragrance and phonic sensations, movement, while belittling visual stimulations. The exhibition creates an impression of a place open to thinking and experiencing, and functions as an asylum, a radically different form to its camp surrounding characterized by a more overwhelming and austere space.

O Sangyo em Dolls: um encontro do Bunraku com Takeshi Kitano

This work aims to investigate the relationship between the Bunraku theater and the film Dolls (2002), by the Japanese director Takeshi Kitano. To do so, it was initially done a theoretical study of this theater, detailing its key elements, and thus allowing a direct analysis of the film to be made. The main objective here was to reveal the film‟s connections with the Bunraku. The Sangyo refers to the simultaneous presence of three arts in the Bunraku theater: the narrative, the music and the manipulation of puppets. In Dolls, the director Takeshi Kitano presents a narrative through three different stories, all built with references to the Bunraku. As in the theater the three distinct arts harmonize on stage, in Dolls three separate stories will perform in harmony within the film. By confronting the Bunraku Theater with the film Dolls, the intention is to establish the connections between the scenic language of the Bunraku, the dramaturgy of Chikamatsu and also the cinema of Kitano. These connections allow to the understanding of how characteristics of a secular art, governed by strong rules and conventions, can be presented again through another language: the cinematic language and its particular set of codes and conventions

Increasing the value of household appliances by adding a heat pump system

Historically, domestic tasks such as preparing food and washing and drying clothes and dishes were done by hand. In a modern home many of these chores are taken care of by machines such as washing machines, dishwashers and tumble dryers. When the first such machines came on the market customers were happy that they worked at all! Today, the costs of electricity and customers’ environmental awareness are high, so features such as low electricity, water and detergent use strongly influence which household machine the customer will buy. One way to achieve lower electricity usage for the tumble dryer and the dishwasher is to add a heat pump system. The function of a heat pump system is to extract heat from a lower temperature source (heat source) and reject it to a higher temperature sink (heat sink) at a higher temperature level. Heat pump systems have been used for a long time in refrigerators and freezers, and that industry has driven the development of small, high quality, low price heat pump components. The low price of good quality heat pump components, along with an increased willingness to pay extra for lower electricity usage and environmental impact, make it possible to introduce heat pump systems in other household products. However, there is a high risk of failure with new features. A number of household manufacturers no longer exist because they introduced poorly implemented new features, which resulted in low quality and product performance. A manufacturer must predict whether the future value of a feature is high enough for the customer chain to pay for it. The challenge for the manufacturer is to develop and produce a high-performance heat pump feature in a household product with high quality, predict future willingness to pay for it, and launch it at the right moment in order to succeed. Tumble dryers with heat pump systems have been on the market since 2000. Paper I reports on the development of a transient simulation model of a commercial heat pump tumble dryer. The measured and simulated results were compared with good similarity. The influence of the size of the compressor and the condenser was investigated using the validated simulation model. The results from the simulation model show that increasing the cylinder volume of the compressor by 50% decreases the drying time by 14% without using more electricity.  Paper II is a concept study of adding a heat pump system to a dishwasher in order to decrease the total electricity usage. The dishwasher, dishware and water are heated by the condenser, and the evaporator absorbs the heat from a water tank. The majority of the heat transfer to the evaporator occurs when ice is generated in the water tank. An experimental setup and a transient simulation model of a heat pump dishwasher were developed. The simulation results show a 24% reduction in electricity use compared to a conventional dishwasher heated with an electric element. The simulation model was based on an experimental setup that was not optimised. During the study it became apparent that it is possible to decrease electricity usage even more with the next experimental setup.

Produktutveckling av en provdocka för lekredskapsutveckling

Detta projekt beställdes av lekredskapstillverkaren HAGS i Aneby. De behövde en docka i en 4-årings storlek till sin produktutveckling. Det företaget frågar efter är en så antropomorfiskt korrekt docka som möjligt med framför allt korrekta proportioner på huvud och lemmar. Denna docka skulle användas för att fastställa måtten på nya produkter och för säkrare säkerhetstester. För att dockan skulle vara könsneutral så fick både dockan och projektet namnet KIM. Projektet har gått igenom flera faser. Först specificerades vad som skulle göras och vilka delar som var viktigast att fokusera på. Sedan löstes hur dockans alla leder skall fungera, hur ytan skall behandlas och hur allting skall monteras. Den huvudsakliga metoden för framtagandet av koncept och slutresultat har varit en iterativ process där lösningar har tagits fram, testats, ändrats och testats igen. Det som har framställts i projektet är koncept för ett helt skelett som med lättare modifieringar kan användas till flera applikationer. Delarna i skelettet är konstruerade efter en ”One Size Fits All” princip där ett litet antal delar kan användas till flera funktionsområden. En del arbete återstår, huvudet har inte fått sin slutgiltiga konstruktion och både händer och fötter behöver gå igenom ett par designfaser för att färdigställas. Det som framför allt återstår av projektet är tillverkning av alla delar, vilket innebär mycket arbete med en 3d-skrivare för alla leder och skulptering för hand för alla mjukdelar.

PROTÉJASE del ZIKA y de otras enfermedades transmitidas por el mosquito

This Spanish language sheet gives tips on how to protect yourself from mosquito bites such as using insect repellent, wearing protective clothes and mosquito-proofing your home.

El futuro de la ropa ecológica en Colombia a partir de las tendencias desarrolladas en Reino Unido y Suecia y su impacto ambiental

Durante los últimos años, los consumidores han tomado conciencia acerca del cuidado medio ambiental, obligando a las empresas a realizar modificaciones tanto en sus procesos como en los insumos empleados. Un claro ejemplo de ello es la ropa ecológica, esta industria busca promover la fabricación de prendas de vestir a partir de insumos orgánicos y/o reciclados, minimizando desperdicios e impacto durante su proceso de producción. Actualmente, hay varias empresas que han empezado a fabricar este tipo de prendas, especialmente en Europa, siendo Suecia y Reino Unido los más representativos. El presente trabajo estudió la factibilidad de la ropa ecológica en Colombia, tomando como punto de referencia los países mencionados. Para lograrlo, se realizaron encuestas a una muestra representativa, al igual que un análisis detallado sobre la producción y tendencias de consumo de la ropa ecológica en Bogotá, Colombia. Además, mediante las encuestas aplicadas, se estudió el comportamiento del consumidor colombiano y se realizó un comparativo frente a estudios desarrollados en países europeos en los últimos años. En conclusión, se encontró que a pesar de la ausencia de empresas y tiendas enfocadas en dicha industria, el consumidor colombiano estaría dispuesto a comprar ropa ecológica. A lo largo del documento, se explica con detalle las características que buscan los colombianos al momento de comprar estas prendas, el lugar en donde prefieren hacerlo, el valor que están dispuestos a pagar y las razones o motivos por los cuales realizan estas acciones.

Relación entre las condiciones de higiene y seguridad y la exposición ambiental a solventes orgánicos en pintores de automóviles de la localidad de barrios unidos, Bogotá 2015

Introducción. Los trabajadores de los talleres de reparación de automóviles conviven diariamente con la exposición a los solventes orgánicos, exposición que se convierte en un riesgo para su salud que generalmente en el corto plazo se presenta como déficits de concentración, memoria y tiempo de reacción y en el largo plazo produciendo graves repercusiones clínicas como efectos mutagénicos y carcinogénicos. Objetivo. Caracterizar las condiciones higiénicas y de seguridad de trabajadores ocupacionalmente expuestos a solventes orgánicos y determinar los niveles ambientales de benceno, tolueno y xileno (BTX) en talleres de lámina y pintura automotriz de la ciudad de Bogotá. Materiales y métodos. Se hizo un estudio de corte transversal en 60 trabajadores que laboran expuestos a solventes orgánicos en talleres de reparación automotriz en Bogotá. Se realizó una encuesta con variables sociodemográficas, laborales y se determinaron los niveles en aire de benceno, tolueno y xileno. Para los muestreos ambientales, las bombas se colocaron en una posición fija representativa del ambiente general, con el objeto de conocer la distribución de los solventes en el área de trabajo. Se realizó un análisis descriptivo por conteos de frecuencia, medidas de tendencia central y dispersión. Se utilizó prueba de bondad de ajuste para distribución normal (Kolmogorov-Smirnov o Shapiro Wilk), prueba t Student para comparación de medias, o en su defecto prueba U de Mann Whitney para comparación de medianas. Para identificar la relación entre las características sociodemográficas y ocupacionales con la exposición a BTX, se utilizaron pruebas de asociación Chi cuadrado o análisis de correlación según la naturaleza de las variables. El nivel de significancia para cada prueba fue 0.05. Resultados. La edad promedio de los trabajadores fue de 43 años y un tiempo total de exposición a solventes de 20 años. Respecto al uso de protección corporal, 45 (75%) de los trabajadores manifestaron que usaban uniforme, mientras que 14 (23,3%) usaban ropa de calle durante la jornada laboral. El 46,7% manifestaron usar protección respiratoria. La concentración de benceno en aire fue entre 0,1 y 0,45 mg/l (mediana de 0,31 mg/l; DE 0,13 mg/l); la de tolueno estuvo entre 8,25 y 27,22 mg/l (mediana de 14,5 mg/l; DE 6.99 mg/l) y la de xileno entre 19,34 y 150,15 mg/l (mediana de 70,12 mg/l; DE 40,82 mg/l). Conclusión. Los pintores de automóviles están expuestos a niveles elevados de solventes en los lugares de trabajo y no cuentan con condiciones de higiene y seguridad industrial adecuados. Un gran número de pintores son informales lo que les impide el acceso a los beneficios del Sistema de Seguridad Social Integral.

Efectos de una intervención educativa en la promoción de la actividad física, otros comportamientos saludables y los conocimientos para la prevención del cáncer de pulmón en jóvenes del colegio La Merced en Bogotá D.C., Colombia

Introducción: El cáncer de pulmón es el tipo de cáncer más mortal a nivel mundial, al cual se atribuyen una de cada cinco muertes anualmente. El objetivo de este estudio fue determinar los efectos de una intervención educativa en la promoción de la actividad física, otros comportamientos saludables y los conocimientos para la prevención del cáncer de pulmón en jóvenes estudiantes de una institución educativa pública en Bogotá, Colombia. Métodos: Estudio experimental no controlado en 243 estudiantes de sexo femenino (Edad 14±1,5 años). La intervención educativa se desarrolló en tres momentos: una sesión educativa con una duración de 60 minutos acorde a la Guía para la Comunicación Educativa en el Marco del Control del Cáncer, en Colombia. Segundo, se enviaron tres correos electrónicos con información acerca del cáncer pulmonar; finalmente se desarrollaron actividades grupales. Para la toma de datos se utilizaron el cuestionario Cáncer Awareness Measure (CAM) y el Sistema de Vigilancia de Factores de Riesgo del Comportamiento (BRFSS). La evaluación se realizó en un período de seguimiento a 1, 3 y 6 meses post-intervención. Resultados: La intervención educativa incrementó significativamente los conocimientos de las jóvenes sobre los signos de alarma del cáncer pulmonar y los principales factores de riesgo modificables, tales como el consumo de cigarrillo, la exposición al humo del mismo y el sedentarismo, al sexto mes post-intervención. Las mejoras en el cambio comportamental no lograron significancia estadística. Conclusiones: Una intervención educativa mejora los conocimientos acerca de la detección temprana y la prevención del cáncer de pulmón, así como los comportamientos saludables en jóvenes estudiantes en Bogotá, Colombia. Se requiere de estudios controlados aleatorizados.

Spectral asymptotic properties of semi-regular non-commutative harmonic oscillators

The study carried out in this thesis is devoted to spectral analysis of systems of PDEs related also with quantum physics models. Namely, the research deals with classes of systems that contain certain quantum optics models such as Jaynes-Cummings, Rabi and their generalizations that describe light-matter interaction. First we investigate the spectral Weyl asymptotics for a class of semiregular systems, extending to the vector-valued case results of Helffer and Robert, and more recently of Doll, Gannot and Wunsch. Actually, the asymptotics by Doll, Gannot and Wunsch is more precise (that is why we call it refined) than the classical result by Helffer and Robert, but deals with a less general class of systems, since the authors make an hypothesis on the measure of the subset of the unit sphere on which the tangential derivatives of the X-Ray transform of the semiprincipal symbol vanish to infinity order. Abstract Next, we give a meromorphic continuation of the spectral zeta function for semiregular differential systems with polynomial coefficients, generalizing the results by Ichinose and Wakayama and Parmeggiani. Finally, we state and prove a quasi-clustering result for a class of systems including the aforementioned quantum optics models and we conclude the thesis by showing a Weyl law result for the Rabi model and its generalizations.

A comprehensive study on robotic manipulation of deformable linear objects

There are many deformable objects such as papers, clothes, ropes in a person’s living space. To have a robot working in automating the daily tasks it is important that the robot works with these deformable objects. Manipulation of deformable objects is a challenging task for robots because these objects have an infinite-dimensional configuration space and are expensive to model, making real-time monitoring, planning and control difficult. It forms a particularly important field of robotics with relevant applications in different sectors such as medicine, food handling, manufacturing, and household chores. In this report, there is a clear review of the approaches used and are currently in use along with future developments to achieve this task. My research is more focused on the last 10 years, where I have systematically reviewed many articles to have a clear understanding of developments in this field. The main contribution is to show the whole landscape of this concept and provide a broad view of how it has evolved. I also explained my research methodology by following my analysis from the past to the present along with my thoughts for the future.