Análises de elementos arquitetônicos de proteção solar em edificações institucionais na cidade de Natal/RN Diretrizes projetuais

The present work concerns the use of shade elements as architectural elements to block sunlight in public buildings. In a city like Natal, (5o South) the incidence of sunrays in any type of design should be a constant concern for all the architects. Besides, this habit of avoiding insolation in the environment is not a common practice. Within this context, the present work has the objective to dig deep into the knowledge of solar control, studying some cases and verifying its function according to the orientation and the original design of the building, having in mind if the shade elements usually used in the region have achieved their purpose of providing protection against the incidence of direct sun rays. This study considers the position of the shade element (horizontal and vertical), the angle formed between them and the respective facades, and the local of the buildings in relation to their orientation during the summer, winter and equinox solstice. As supporting instruments the solar map of the city and the protractor, for measuring shade angles, were used. It was concluded that in all the cases studied, it was not possible to obtain the maximum use of the elements. It was verified that the best type of shade element (more efficient) for the city of Natal is the mixed type (horizontal and vertical) and that the vertical shade elements are more efficient in the early mornings and late afternoon. The horizontal shade elements are used more effective at midday. We intend to present the results of this study to the architects in the region in order to show them the correct ways of using the shade elements according to the possible orientation on the facade, as a supporting tool at the time of designing a project as well as a subsidy for further discussions on the elaboration of the new urban standards for the city of Natal/RN

Adição de nanopartículas de Ti em matriz de Fe através da deposição por magnetron sputtering

Microalloyed steels constitute a specific class of steel with low amount of carbon and microalloying elements such as Vanadium (V), Niobium (Nb) and Titanium (Ti). The development and application of microalloyed steels and steels in general are limited to the handling of powders with particles of submicron or nanometer dimensions. Therefore, this work presents an alternative in order to construction of microalloyed steels utilizing the deposition by magnetron sputtering technique as a microalloying element addiction in which Ti nanoparticles are dispersed in an iron matrix. The advantage of that technique in relation to the conventional metallurgical processes is the possibility of uniformly disperse the microalloying elements in the iron matrix. It was carried out deposition of Ti onto Fe powder in high CH4, H2, Ar plasma atmosphere, with two deposition times. After the deposition, the iron powder with nanoparticles of Ti dispersed distributed, were compacted and sintered at 1120 ° C in resistive furnace. Characterization techniques utilized in the samples of powder before and after deposition of Ti were Granulometry, Scanning Electron Microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (DRX). In the case of sintered samples, it was carried out characterization by SEM and Vickers Microhardness assays. The results show which the deposition technique by magnetron sputtering is practicable in the dispersion of particles in iron matrix. The EDX microanalysis detected higher percentages of Ti when the deposition were carried out with the inert gas and when the deposition process was carried out with reactive gas. The presence of titanium in iron matrix was also evidenced by the results of X-ray diffraction peaks that showed shifts in the network matrix. Given these results it can be said that the technique of magnetron sputtering deposition is feasible in the dispersion of nanoparticles of iron matrix in Ti.

Estudo paramétrico da recuperação de óleo no processo de drenagem gravitacional com injeção de CO2

The gas injection has become the most important IOR process in the United States. Furthermore, the year 2006 marks the first time the gas injection IOR production has surpassed that of steam injection. In Brazil, the installation of a petrochemical complex in the Northeast of Brazil (Bahia State) offers opportunities for the injection of gases in the fields located in the Recôncavo Basin. Field-scale gas injection applications have almost always been associated with design and operational difficulties. The mobility ratio, which controls the volumetric sweep, between the injected gas and displaced oil bank in gas processes, is typically unfavorable due to the relatively low viscosity of the injected gas. Furthermore, the difference between their densities results in severe gravity segregation of fluids in the reservoirs, consequently leading to poor control in the volumetric sweep. Nowadays, from the above applications of gas injection, the WAG process is most popular. However, in attempting to solve the mobility problems, the WAG process gives rise to other problems associated with increased water saturation in the reservoir including diminished gas injectivity and increased competition to the flow of oil. The low field performance of WAG floods with oil recoveries in the range of 5-10% is a clear indication of these problems. In order to find na effective alternative to WAG, the Gas Assisted Gravity Drainage (GAGD) was developed. This process is designed to take advantage of gravity force to allow vertical segregation between the injected CO2 and reservoir crude oil due to their density difference. This process consists of placing horizontal producers near the bottom of the pay zone and injecting gás through existing vertical wells in field. Homogeneous models were used in this work which can be extrapolated to commercial application for fields located in the Northeast of Brazil. The simulations were performed in a CMG simulator, the STARS 2007.11, where some parameters and their interactions were analyzed. The results have shown that the CO2 injection in GAGD process increased significantly the rate and the final recovery of oil

Análise paramétrica da simulação composicional do processo de Drenagem Gravitacional Assistida por Gás (GAGD)

In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2

Estudo da perda de carga e calor no poço injetor no processo De drenagem gravitacional assistida por vapor (SAGD)

The oil companies in the area in general are looking for new technologies that can increase the recovery factor of oil contained in reservoirs. These investments are mainly aimed at reducing the costs of projects which are high. Steam injection is one of these special methods of recovery in which steam is injected into the reservoir in order to reduce the viscosity of the oil and make it more mobile. The process assisted gravity drainage steam (SAGD) using steam injection in its mechanism, as well as two parallel horizontal wells. In this process steam is injected through the horizontal injection well, then a vapor chamber is formed by heating the oil in the reservoir and, by the action of gravitational forces, this oil is drained down to where the production well. This study aims to analyze the influence of pressure drop and heat along the injection well in the SAGD process. Numerical simulations were performed using the thermal simulator STARS of CMG (Computer Modeling Group). The parameters studied were the thermal conductivity of the formation, the flow of steam injection, the inner diameter of the column, the steam quality and temperature. A factorial design was used to verify the influence of the parameters studied in the recovery factor. We also analyzed different injection flow rates for the model with pressure drop and no pressure drop, as well as different maximum flow rates of oil production. Finally, we performed an economic analysis of the two models in order to check the profitability of the projects studied. The results showed that the pressure drop in injection well have a significant influence on the SAGD process.

Estudo do processo de drenagem gravitacional do óleo assistido com injeção de vapor e solvente

Como os recursos de hidrocarbonetos convencionais estão se esgotando, a crescente demanda mundial por energia impulsiona a indústria do petróleo para desenvolver mais reservatórios não convencionais. Os recursos mundiais de betume e óleo pesado são estimados em 5,6 trilhões de barris, dos quais 80% estão localizados na Venezuela, Canadá e EUA. Um dos métodos para explorar estes hidrocarbonetos é o processo de drenagem gravitacional assistido com injeção de vapor e solvente (ES-SAGD Expanding Solvent Steam Assisted Gravity Drainage). Neste processo são utilizados dois poços horizontais paralelos e situados verticalmente um acima do outro, um produtor na base do reservatório e um injetor de vapor e solvente no topo do reservatório. Este processo é composto por um método térmico (injeção de vapor) e um método miscível (injeção de solvente) com a finalidade de causar a redução das tensões interfaciais e da viscosidade do óleo ou betume. O objetivo deste estudo é analisar a sensibilidade de alguns parâmetros operacionais, tais como: tipo de solvente injetado, qualidade do vapor, distância vertical entre os poços, porcentagem de solvente injetado e vazão de injeção de vapor sobre o fator de recuperação para 5, 10 e 15 anos. Os estudos foram realizados através de simulações concretizadas no módulo STARS (Steam Thermal, and Advanced Processes Reservoir Simulator) do programa da CMG (Computer Modelling Group), versão 2010.10, onde as interações entre os parâmetros operacionais, estudados em um modelo homogêneo com características de reservatórios semelhantes aos encontrados no Nordeste Brasileiro, foram observadas. Os resultados obtidos neste estudo mostraram que os melhores fatores de recuperação ocorreram para níveis máximos do percentual de solvente injetado e da distância vertical entre os poços. Observou-se também que o processo será rentável dependendo do tipo e do valor do solvente injetado

Simulador de escoamento multifásico em poços de petróleo (SEMPP)

The multiphase flow occurrence in the oil and gas industry is common throughout fluid path, production, transportation and refining. The multiphase flow is defined as flow simultaneously composed of two or more phases with different properties and immiscible. An important computational tool for the design, planning and optimization production systems is multiphase flow simulation in pipelines and porous media, usually made by multiphase flow commercial simulators. The main purpose of the multiphase flow simulators is predicting pressure and temperature at any point at the production system. This work proposes the development of a multiphase flow simulator able to predict the dynamic pressure and temperature gradient in vertical, directional and horizontal wells. The prediction of pressure and temperature profiles was made by numerical integration using marching algorithm with empirical correlations and mechanistic model to predict pressure gradient. The development of this tool involved set of routines implemented through software programming Embarcadero C++ Builder® 2010 version, which allowed the creation of executable file compatible with Microsoft Windows® operating systems. The simulator validation was conduct by computational experiments and comparison the results with the PIPESIM®. In general, the developed simulator achieved excellent results compared with those obtained by PIPESIM and can be used as a tool to assist production systems development

Efeito da perda de carga e calor no poço injetor no processo de drenagem gravitacional assistido com vapor e solvente

Nowadays, most of the hydrocarbon reserves in the world are in the form of heavy oil, ultra - heavy or bitumen. For the extraction and production of this resource is required to implement new technologies. One of the promising processes for the recovery of this oil is the Expanding Solvent Steam Assisted Gravity Drainage (ES-SAGD) which uses two parallel horizontal wells, where the injection well is situated vertically above the production well. The completion of the process occurs upon injection of a hydrocarbon additive at low concentration in conjunction with steam. The steam adds heat to reduce the viscosity of the oil and solvent aids in reducing the interfacial tension between oil/ solvent. The main force acting in this process is the gravitational and the heat transfer takes place by conduction, convection and latent heat of steam. In this study was used the discretized wellbore model, where the well is discretized in the same way that the reservoir and each section of the well treated as a block of grid, with interblock connection with the reservoir. This study aims to analyze the influence of the pressure drop and heat along the injection well in the ES-SAGD process. The model used for the study is a homogeneous reservoir, semi synthetic with characteristics of the Brazilian Northeast and numerical simulations were performed using the STARS thermal simulator from CMG (Computer Modelling Group). The operational parameters analyzed were: percentage of solvent injected, the flow of steam injection, vertical distance between the wells and steam quality. All of them were significant in oil recovery factor positively influencing this. The results showed that, for all cases analyzed, the model considers the pressure drop has cumulative production of oil below its respective model that disregards such loss. This difference is more pronounced the lower the value of the flow of steam injection

Nova técnica para obtenção de fraturas com altíssima condutividade em poços de petróleo

Increase hydrocarbons production is the main goal of the oilwell industry worldwide. Hydraulic fracturing is often applied to achieve this goal due to a combination of attractive aspects including easiness and low operational costs associated with fast and highly economical response. Conventional fracturing usually involves high-flowing high-pressure pumping of a viscous fluid responsible for opening the fracture in the hydrocarbon producing rock. The thickness of the fracture should be enough to assure the penetration of the particles of a solid proppant into the rock. The proppant is driven into the target formation by a carrier fluid. After pumping, all fluids are filtered through the faces of the fracture and penetrate the rock. The proppant remains in the fracture holding it open and assuring high hydraulic conductivity. The present study proposes a different approach for hydraulic fracturing. Fractures with infinity conductivity are formed and used to further improve the production of highly permeable formations as well as to produce long fractures in naturally fractured formations. Naturally open fractures with infinite conductivity are usually encountered. They can be observed in rock outcrops and core plugs, or noticed by the total loss of circulation during drilling (even with low density fluids), image profiles, pumping tests (Mini-Frac and Mini Fall Off), and injection tests below fracturing pressure, whose flow is higher than expected for radial Darcian ones. Naturally occurring fractures are kept open by randomly shaped and placed supporting points, able to hold the faces of the fracture separate even under typical closing pressures. The approach presented herein generates infinite conductivity canal held open by artificially created parallel supporting areas positioned both horizontally and vertically. The size of these areas is designed to hold the permeable zones open supported by the impermeable areas. The England & Green equation was used to theoretically prove that the fracture can be held open by such artificially created set of horizontal parallel supporting areas. To assess the benefits of fractures characterized by infinite conductivity, an overall comparison with finite conductivity fractures was carried out using a series of parameters including fracture pressure loss and dimensionless conductivity as a function of flow production, FOI folds of increase, flow production and cumulative production as a function of time, and finally plots of net present value and productivity index

Morphometric characteristics of Prochilodus lineatus (Valenciennes 1847), of the migratory and resident stocks of the river Mogí-Guaçu, São Paulo State, Brazil

A espécie Prochilodus lineatus é de grande importância comercial na região dos rios Grande, Pardo e Mogi-Guaçu e tem como característica a formação de grandes cardumes, apta a desenvolver amplos deslocamentos migratórios. O presente trabalho objetivou avaliar, por meio das características morfométricas e etária, se os curimbatás (P. lineatus) dos diferentes estoques migradores e residentes constituem uma única população, havendo interação entre as sub-populações no período de piracema (migração reprodutiva). Utilizou-se um delineamento inteiramente casualizado em esquema fatorial 4 x 2, com quatro tipos de estoques (um residente e três migradores) e dois sexos (macho e fêmea) com trinta repetições, considerando cada peixe como unidade experimental. Foi observada variação de 80,19% para o primeiro componente principal e 8,09% do segundo componente principal fornecida pelas dez variáveis morfométricas dos estoques residentes e migradores. O estoque residente correspondeu aos maiores valores para todas as variáveis morfométricas. Houve sobreposição dos escores individuais das mesmas características entre os estoques migradores. Observou-se predominância de machos entre os estoques residentes e migrador I e II. As semelhanças morfométricas verificadas entre os estoques migradores indicam tratar-se de uma única população, com pequenas variações interpopulacional.

Influência do armazenamento de ramas para plantio em algumas características agronômicas da mandioca

Nas condições do Estado de São Paulo é freqüente o armazenamento de ramas de mandioca (Manihot esculenta Crantz) para aguardar a melhor oportunidade de efetuar o plantio. Utilizam-se os sistemas de empilhamento horizontal e vertical, sendo mais comum o primeiro. Raramente, empregam-se ramas recém-colhidas para plantio. 0 presente trabalho teve por objetivo estudar o efeito do material de plantio em alguns parâmetros fitotécnicos da cultura, em função dos diferentes estádios fisiológicos causados pelo armazenamento ou não das ramas. Num esquema fatorial de 2 x 3, em blocos ao acaso com quatro repetições, utilizaram-se dois cultivares - IAC 12-829 e SRT 1287-Fibra, de alta e baixa capacidade de ramificação respectivamente - e três tipos de manivas, originárias de ramas recém-colhidas e de ramas conservadas por 105 dias nos sistemas de empilhamento horizontal e vertical. O experimento foi desenvolvido no ano agrícola 1991/92, na Estação Experimental do Vale do Paranapanema (IAC), Assis (SP), em latossolo vermelho-escuro, álico, textura média. Os resultados mais relevantes mostraram que: (a) O armazenamento de ramas em pilhas horizontais provocou aumento no número de hastes primárias dos dois cultivares e aumentou o peso da parte aérea do SRT 1287-Fibra; (b) O SRT 1287-Fibra foi mais influenciado pelo armazenamento da rama na posição horizontal que o IAC 12-829; (c) Este, em média, foi superior na produção de raízes, não diferindo, entretanto, do primeiro quando as manivas provinham de ramas armazenadas na posição horizontal; (d) As ramas procedentes do armazenamento na posição vertical comportaram-se similarmente às não armazenadas.

Desenvolvimento e assistência social : uma avaliação da efetividade da política de assistência social nos municípios de Assú e Mossoró (2004 -2008)

This thesis, whose title is DEVELOPMENT AND SOCIAL ASSISTANCE: AN EFFECTIVENESS EVALUATION IN SOCIAL ASSISTENCE POLICY IN THE CITIES OF ASSÚ AND MOSSORÓ/RN (2004/2008), has as main aim to evaluate effectiveness in Social Assistance Policy in the cities of Assu and Mossoró/RN, from 2004 to 2008, identifying its impacts and effects in life of its users. The methodological process for the research was composed by: a) Literature review on this theme, development of public policies; social public policies, public policy evaluation and Social Assistance Policy in Brazil; b) Documental research from Municipal Management of Social Development and Municipal Counsels of Social Assistance in the cities of Assu and Mossoró/RN about the object of this study and empirical field; c) Field Research constituted by the realization of Focal Groups with Social Assistance users and semistructured interviews with municipal managers from Assú and Mossoró. It was also taken into account participant observations in events and activities related to Social Assistance previously mentioned, considering field management and also the response to users demands. Articulating the themes of Development and Public Social Policy in Social Assistance was the theoretical purpose for this thesis. To achieve this purpose, it was performed two theoretical displacements related, at the same time, to the notion of development and to the concept of Social Assistance, which means to comprehend development as social change and improvement in users life quality, expressed in the expansion of their capacities and liberties (SEN, 1993, 2000), and the Social Assistance as an element for development. Such displacements provide a view of Public policy and Social Policies and evaluate National Policy of Social Assistance achieved in those cities. As product, this thesis presents a methodological purpose for effectiveness evaluation in Public Policy, taking into account expansion of capacities and liberties, concluding that Social Assistance Policy in Assú and Mossoró/RN, even in lesser extent had its impact and caused effective results in the life of their users and provided an expansion of their capacities and liberties, improving life quality and empowered agent condition for those subjects. The results show that this Policy has been proved to be effective, and consequently, it was considered, in this thesis, to be also an element and an allied for development

O santo do purgatório:a transformação mítica do cangaceiro Jararaca em herói

This research intends to narrate the journey of a simple man who was turned into a saint by a group of believers in Mossoró, west of Rio Grande do Norte. We recognized in the story of José Leite Santana, the "cangaceiro" Jararacá, an appropriated land to build an investigative approach of how characters as different as bandit and saint can be interconnected. From the believers speech, a narrative was created about these detachments of concepts based on the hero myth that is shown here as a part of men´s dealing with death

Diálogos da Alma: uma outra história da loucura

The tesis intends to awake a new way of looking at madness. It presents as reference the Psychiatric Hospital Doctor João Machado (Natal/RN) and histories of life and narratives of four intern residents. The research in an ethical horizon, intends to give back to the subjects the voices long silented behind the institutions walls by their families and society in general. As well as to open the interpretations of science to receive and to dialogue with other itineraries of thought that, if on one hand does not restitute the explanation of the Real, on the other hand expresses other forms to see the world. Dislocated of the bigger social environment, the people identified as insane, construct their histories endowed with autonomy and displacements in relation to the social rules and structures that characterize our society, as much as in relation to the logical principles of thought that assume an objective and rational reality. As well as a remnants bedspread configured in a complex and unfinished object, the break up of histories of life of the interns, interviews with medical on psychiatrists to the Doctor João Machado Hospital, documents of the institution and depositions of that house, were the raw material to construct, with this tesis, another chapter of the 'history of madness'. In elapsing of the work innumerable voices have been heard. Some that study the phenomenon of madness, others that live this 'state of the being' in the world. We opt to detaching the first of an open conception on the theme through intellectuals as: João da Costa Machado, Ulysses Pernambucano, Nise da Silveira and Boris Cyrulnik. They express ethics compromised to the humanity of the being

Modelos para análise e dimensionamento de painéis de alvenaria estrutural

The main objective of this thesis was the study of bracing panels of structural masonry, by applying the Finite Element Method and Strut and Tie Method. It was analyzed the following aspects: the effect of orthotropy on the behavior of the panels; distribution of horizontal forces between panels for buildings; comparison between Equivalent Frame and Finite Elements models; panels design with the Strut and Tie Method. The results showed that one should not disregard the orthotropy, otherwise this can lead to models stiffer than the real. Regarding the distribution of horizontal forces, showed that the disregard of lintels and shear deformation leads to significant differences in the simplified model. The results showed also that the models in Finite Element and Equivalent Frame exhibit similar behavior in respect to stiffness of panels and stress distribution over the sessions requested. It was discussing criteria for designing Strut and Tie Method models in one floor panels. Then, the theoretical strength these panels was compared with the rupture strength of panels tested in the literature. The theoretical maximum strength were always less than the rupture strength of the panels obtained in tests, due to the fact that the proposed model cannot represent the behavior of the masonry after the start of the panel cracking due to plasticization of the reinforcement