Physiological investigation of periosteum structure and its application in periosteum tissue engineering

Although many different materials, techniques and methods, including artificial or engineered bone substitutes, have been used to repair various bone defects, the restoration of critical-sized bone defects caused by trauma, surgery or congenital malformation is still a great challenge to orthopedic surgeons. One important fact that has been neglected in the pursuit of resolutions for large bone defect healing is that most physiological bone defect healing needs the periosteum and stripping off the periosteum may result in non-union or non-healed bone defects. Periosteum plays very important roles not only in bone development but also in bone defect healing. The purpose of this project was to construct a functional periosteum in vitro using a single stem cell source and then test its ability to aid the repair of critical-sized bone defect in animal models. This project was designed with three separate but closely-linked parts which in the end led to four independent papers. The first part of this study investigated the structural and cellular features in periostea from diaphyseal and metaphyseal bone surfaces in rats of different ages or with osteoporosis. Histological and immunohistological methods were used in this part of the study. Results revealed that the structure and cell populations in periosteum are both age-related and site-specific. The diaphyseal periosteum showed age-related degeneration, whereas the metaphyseal periosteum is more destructive in older aged rats. The periosteum from osteoporotic bones differs from normal bones both in terms of structure and cell populations. This is especially evident in the cambial layer of the metaphyseal area. Bone resorption appears to be more active in the periosteum from osteoporotic bones, whereas bone formation activity is comparable between the osteoporotic and normal bone. The dysregulation of bone resorption and formation in the periosteum may also be the effect of the interaction between various neural pathways and the cell populations residing within it. One of the most important aspects in periosteum engineering is how to introduce new blood vessels into the engineered periosteum to help form vascularized bone tissues in bone defect areas. The second part of this study was designed to investigate the possibility of differentiating bone marrow stromal cells (BMSCs) into the endothelial cells and using them to construct vascularized periosteum. The endothelial cell differentiation of BMSCs was induced in pro-angiogenic media under both normoxia and CoCl2 (hypoxia-mimicking agent)-induced hypoxia conditions. The VEGF/PEDF expression pattern, endothelial cell specific marker expression, in vitro and in vivo vascularization ability of BMSCs cultured in different situations were assessed. Results revealed that BMSCs most likely cannot be differentiated into endothelial cells through the application of pro-angiogenic growth factors or by culturing under CoCl2-induced hypoxic conditions. However, they may be involved in angiogenesis as regulators under both normoxia and hypoxia conditions. Two major angiogenesis-related growth factors, VEGF (pro-angiogenic) and PEDF (anti-angiogenic) were found to have altered their expressions in accordance with the extracellular environment. BMSCs treated with the hypoxia-mimicking agent CoCl2 expressed more VEGF and less PEDF and enhanced the vascularization of subcutaneous implants in vivo. Based on the findings of the second part, the CoCl2 pre-treated BMSCs were used to construct periosteum, and the in vivo vascularization and osteogenesis of the constructed periosteum were assessed in the third part of this project. The findings of the third part revealed that BMSCs pre-treated with CoCl2 could enhance both ectopic and orthotopic osteogenesis of BMSCs-derived osteoblasts and vascularization at the early osteogenic stage, and the endothelial cells (HUVECs), which were used as positive control, were only capable of promoting osteogenesis after four-weeks. The subcutaneous area of the mouse is most likely inappropriate for assessing new bone formation on collagen scaffolds. This study demonstrated the potential application of CoCl2 pre-treated BMSCs in the tissue engineering not only for periosteum but also bone or other vascularized tissues. In summary, the structure and cell populations in periosteum are age-related, site-specific and closely linked with bone health status. BMSCs as a stem cell source for periosteum engineering are not endothelial cell progenitors but regulators, and CoCl2-treated BMSCs expressed more VEGF and less PEDF. These CoCl2-treated BMSCs enhanced both vascularization and osteogenesis in constructed periosteum transplanted in vivo.

Wood properties and processing outcomes for plantation grown African mahogany (Khaya senegalensis) trees from Clare, Queensland (18 and 20 year-old trees) and Katherine, Northern Territory (14 year-old trees).

Khaya senegalensis, African mahogany, a high-value hardwood, was introduced in the Northern Territory (NT) in the 1950s; included in various trials there and at Weipa, Q in the 1960s-1970s; planted on ex mine sites at Weipa (160 ha) until 1985; revived in farm plantings in Queensland and in trials in the NT in the 1990s; adopted for large-scale, annual planting in the Douglas-Daly region, NT from 2006 and is to have the planted area in the NT extended to at least 20,000 ha. The recent serious interest from plantation growers, including Forest Enterprises Australia Ltd (FEA), has seen the establishment of some large scale commercial plantations. FEA initiated the current study to process relatively young plantation stands from both Northern Territory and Queensland plantations to investigate the sawn wood and veneer recovery and quality from trees ranging from 14 years (NT – 36 trees) to 18-20 years (North Queensland – 31 trees). Field measures of tree size and straightness were complemented with log end splitting assessment and cross-sectional disc sample collection for laboratory wood properties measurements including colour and shrinkage. End-splitting scores assessed on sawn logs were relatively low compared to fast grown plantation eucalypts and did not impact processing negatively. Heartwood proportion in individual trees ranged from 50% up to 92 % of butt cross-sectional disc area for the visually-assessed dark coloured central heartwood and lighter coloured transition wood combined. Dark central heartwood proportion was positively related to tree size (R2 = 0.57). Chemical tests failed to assist in determining heartwood – sapwood boundary. Mean basic density of whole disc samples was 658 kg/m3 and ranged among trees from 603 to 712 kg/m3. When freshly sawn, the heartwood of African mahogany was orange-red to red. Transition wood appeared to be pinkish and the sapwood was a pale yellow colour. Once air dried the heartwood colour generally darkens to pinkish-brown or orange-brown and the effect of prolonged time and sun exposure is to darken and change the heartwood to a red-brown colour. A portable colour measurement spectrophotometer was used to objectively assess colour variation in CIE L*, a* and b* values over time with drying and exposure to sunlight. Capacity to predict standard colour values accurately after varying periods of direct sunlight exposure using results obtained on initial air-dried surfaces decreased with increasing time to sun exposure. The predictions are more accurate for L* values which represent brightness than for variation in the a* values (red spectrum). Selection of superior breeding trees for colour is likely to be based on dried samples exposed to sunlight to reliably highlight wood colour differences. A generally low ratio between tangential and radial shrinkages was found, which was reflected in a low incidence of board distortion (particularly cupping) during drying. A preliminary experiment was carried out to investigate the quality of NIR models to predict shrinkage and density. NIR spectra correlated reasonably well with radial shrinkage and air dried density. When calibration models were applied to their validation sets, radial shrinkage was predicted to an accuracy of 76% with Standard Error of Prediction of 0.21%. There was also a strong predictive power for wood density. These are encouraging results suggesting that NIR spectroscopy has good potential to be used as a non-destructive method to predict shrinkage and wood density using 12mm diameter increment core samples. Average green off saw recovery was 49.5% (range 40 to 69%) for Burdekin Agricultural College (BAC) logs and 41.9% (range 20 to 61%) for Katherine (NT) logs. These figures are about 10% higher than compared to 30-year-old Khaya study by Armstrong et al. (2007) however they are inflated as the green boards were not docked to remove wane prior to being tallied. Of the recovered sawn, dried and dressed volume from the BAC logs, based on the cambial face of boards, 27% could potentially be used for select grade, 40% for medium feature grade and 26% for high feature grades. The heart faces had a slightly higher recovery of select (30%) and medium feature (43%) grade boards with a reduction in the volume of high feature (22%) and reject (6%) grade boards. Distribution of board grades for the NT site aged 14 years followed very similar trends to those of the BAC site boards with an average (between facial and cambial face) 27% could potentially be used for select grade, 42% for medium feature grade, 26% for high feature grade and 5% reject. Relatively to some other subtropical eucalypts, there was a low incidence of borer attack. The major grade limiting defects for both medium and high feature grade boards recovered from the BAC site were knots and wane. The presence of large knots may reflect both management practices and the nature of the genetic material at the site. This stand was not managed for timber production with a very late pruning implemented at about age 12 years. The large amount of wane affected boards is indicative of logs with a large taper and the presence of significant sweep. Wane, knots and skip were the major grade limiting defects for the NT site reflecting considerable amounts of sweep with large taper as might be expected in younger trees. The green veneer recovered from billets of seven Khaya trees rotary peeled on a spindleless lathe produced a recovery of 83% of green billet volume. Dried veneer recovery ranged from 40 to 74 % per billet with an average of 64%. All of the recovered grades were suitable for use in structural ply in accordance to AS/NZ 2269: 2008. The majority of veneer sheets recovered from all billets was C grade (27%) with 20% making D grade and 13% B grade. Total dry sliced veneer recovery from the logs of the two largest logs from each location was estimated to be 41.1%. Very positive results have been recorded in this small scale study. The amount of colour development observed and the very reasonable recoveries of both sawn and veneer products, with a good representation of higher grades in the product distribution, is encouraging. The prospects for significant improvement in these results from well managed and productive stands grown for high quality timber should be high. Additionally, the study has shown the utility of non-destructive evaluation techniques for use in tree improvement programs to improve the quality of future plantations. A few trees combined several of the traits desired of individuals for a first breeding population. Fortunately, the two most promising trees (32, 19) had already been selected for breeding on external traits, and grafts of them are established in the seed orchard.

Studies on the Cell Wall Structure and on the Mechanical Properties of Norway Spruce

The structure and the mechanical properties of wood of Norway spruce (Picea abies [L.] Karst.) were studied using small samples from Finland and Sweden. X-ray diffraction (XRD) was used to determine the orientation of cellulose microfibrils (microfibril angle, MFA), the dimensions of cellulose crystallites and the average shape of the cell cross-section. X-ray attenuation and x-ray fluorescence measurements were used to study the chemical composition and the trace element content. Tensile testing with in situ XRD was used to characterise the mechanical properties of wood and the deformation of crystalline cellulose within the wood cell walls. Cellulose crystallites were found to be 192 284 Å long and 28.9 33.4 Å wide in chemically untreated wood and they were longer and wider in mature wood than in juvenile wood. The MFA distribution of individual Norway spruce tracheids and larger samples was asymmetric. In individual cell walls, the mean MFA was 19 30 degrees, while the mode of the MFA distribution was 7 21 degrees. Both the mean MFA and the mode of the MFA distribution decreased as a function of the annual ring. Tangential cell walls exhibited smaller mean MFA and mode of the MFA distribution than radial cell walls. Maceration of wood material caused narrowing of the MFA distribution and removed contributions observed at around 90 degrees. In wood of both untreated and fertilised trees, the average shape of the cell cross-section changed from circular via ambiguous to rectangular as the cambial age increased. The average shape of the cell cross-section and the MFA distribution did not change as a result of fertilisation. The mass absorption coefficient for x-rays was higher in wood of fertilised trees than in that of untreated trees and wood of fertilised trees contained more of the elements S, Cl, and K, but a smaller amount of Mn. Cellulose crystallites were longer in wood of fertilised trees than in that of untreated trees. Kraft cooking caused widening and shortening of the cellulose crystallites. Tensile tests parallel to the cells showed that if the mean MFA is initially around 10 degrees or smaller, no systematic changes occur in the MFA distribution due to strain. The role of mean MFA in defining the tensile strength or the modulus of elasticity of wood was not as dominant as that reported earlier. Crystalline cellulose elongated much less than the entire samples. The Poisson ratio νca of crystalline cellulose in Norway spruce wood was shown to be largely dependent on the surroundings of crystalline cellulose in the cell wall, varying between -1.2 and 0.8. The Poisson ratio was negative in kraft cooked wood and positive in chemically untreated wood. In chemically untreated wood, νca was larger in mature wood and in latewood compared to juvenile wood and earlywood.

Resenha da publicação "Balance preliminar de las economías de América Latina y el Caribe" - Cepal, 2003

Consultoria Legislativa - Área IX - Política e Planejamento Econômicos, Desenvolvimento Econômico Economia Internacional.

Escritório de projetos na Câmara dos Deputados : estudo de caso - interação entre os escritórios setoriais e o Escritório Corporativo na Câmara dos Deputados

Este trabalho visa estudar o modelo de escritórios de projeto da Câmara dos Deputados, objetivando compreender como é a atual interação entre os escritórios e sugerir melhorias nesta interação. O referencial teórico adotado discute conceitos relacionados a gestão de projetos e a escritórios de projeto, identificando possíveis atribuições e tipos existentes. Para a análise deste estudo de caso, foi feita uma contextualização do surgimento da Gestão Estratégica de Câmara dos Deputados, bem como a apresentação do atual modelo de escritórios de projeto da Casa. A pesquisa realizada em todos os escritórios da Casa foi a qualitativa. Os resultados apresentam as dificuldades encontradas atualmente, em especial no uso da metodologia adotada pela Câmara, e apresenta sugestões feitas pelos próprios entrevistados. Conclui-se que há um desalinhamento entre os escritórios, porém um grande interesse em encontrar um equilíbrio entre o uso da metodologia e nos resultados obtidos pelo seu uso.

Dinâmica de crescimento de Centrolobium robustum (Vell.) Mart. ex Benth. (Leguminosae-Papilionoideae) na Floresta Atlântica, Rio de Janeiro, Brasil

O conhecimento sobre o ritmo de crescimento radial e a idade das árvores é um aspecto básico para compreender a dinâmica das populações, bem como o desenvolvimento e a sobrevivência das espécies. Nos trópicos, entretanto, estudos populacionais com este enfoque ainda são escassos, a despeito da urgente necessidade de preservação e manejo de suas florestas. Este trabalho tem por objetivo: i) Descrever a atividade cambial e o comportamento fenológico de Centrolobium robustum (Vell.) Mart. ex Benth., correlacionando estes parâmetros entre si; ii) Avaliar a influência da sazonalidade climática e do fotoperíodo sobre a atividade cambial e o comportamento fenológico e iii) Caracterizar o padrão estrutural dos anéis de crescimento e determinar, a partir destes, a idade e as taxas de crescimento radial da espécie na Reserva Biológica do Tinguá, RJ. Para a análise da atividade cambial, amostras de câmbio foram coletadas trimestralmente, processadas segundo técnicas usuais de anatomia vegetal e observadas sob microscopia ótica de campo claro, de fluorescência, de polarização e microscopia eletrônica de transmissão. O acompanhamento fenológico foi realizado mensalmente e os índices de atividade e de intensidade foram utilizados para analisar as fenofases reprodutivas e vegetativas, respectivamente. Para a investigação dendrocronológica, foram coletadas amostras com auxílio de sonda de Pressler, as quais foram polidas e observadas sob microscópio estereoscópico. Os resultados evidenciaram um ciclo anual de atividade e dormência cambial, caracterizados, respectivamente, pela presença de células em processo de divisão e diferenciação junto ao câmbio e de células completamente diferenciadas e deposição de calose em elementos de tubo crivado adjacentes à zona cambial. A dormência cambial coincidiu com a senescência e queda foliar, enquanto a atividade foi mais evidente na presença de folhas adultas na copa. A sazonalidade da atividade cambial apresentou correlação significativa com os dados de temperatura, precipitação e fotoperíodo do mês de realização das coletas. Foi constatado o regime sazonal da atividade cambial em associação ao clima e ao comportamento fenológico da espécie, conferindo caráter anual aos anéis de crescimento. Os resultados permitiram estabelecer o padrão dendroecológico de C. robustum e as idades e taxas de crescimento da população estudada.

A habilidade preditiva e os impactos dos choques na política monetária e no câmbio: comparações entre modelos DSGE, VAR e BVAR estimados para o Brasil

Este artigo compara a habilidade preditiva foradaamostra de um modelo DSGE (DynamicStochastic General EquilibriumModel)Novo-Keynesiano, especificado e estimado para o Brasil, com a de um modelo Autorregressivo Vetorial (VAR) e com a de um modelo AutorregressivoVetorial Bayesiano (BVAR). O artigo inova em relação a outros trabalhos similares feitos para o Brasil (Castro et al. (2011) e Caetano e Moura (2013)), ao escolher uma especificação para o modelo DSGE que, ao permitir o uso de um conjunto de informação mais rico, tornou possível computar-se a habilidade preditiva do DSGE a partir de previsões que são,verdadeiramente,previsõesfora da amostra. Ademais, diferentemente de outros artigos que utilizaram dados brasileiros, avalia-se em que medida as respostas das variáveis aos choques na política monetária e no câmbio, obtidas pelo modelo DSGE, se assemelham àquelas de um BVAR estimado através de procedimentos bayesianos desenvolvidos de forma consistente. O modelo DSGE estimado é similar ao utilizado por Justiniano e Preston (2010) e Alpanda (2010). O modelo BVAR foi estimado utilizando uma metodologia semelhante à desenvolvida por Sims e Zha (1998), Waggoner e Zha (2003) e Ramírez, Waggoner e Zha (2007).Os resultados obtidos mostram que o modelo DSGE é capaz de gerar, para algumas variáveis, previsões competitivas em relação às dos outros modelos rivais VAR e BVAR. Além disso, as respostas das variáveis aos choques nas políticas monetária e cambial, nos modelos DSGE e BVAR, são bastante similares.

Relatório de estágio e Breve análise das opções das empresas do PSI20 sobre instrumentos financeiros derivados

Relatório de estágio, Mestrado, Contabilidade e Finanças, Instituto Politécnico de Santarém, Escola Superior de Gestão e Tecnologia, 2015

Detecção multiutilizador do domínio da frequência para sistemas DS-CDMA

Os Sinais de Espalhamento de Espectro de Sequência Directa exibem propriedades cicloestacionárias que implicam redundância entre componentes de frequência espaçadas por múltiplos da taxa de símbolo. Nesta tese, é apresentado um cancelador de interferência multiutilizador (Cancelador por translação na frequência - FSC) que tira partido desta propriedade. Este cancelador linear opera no domínio da frequência no sinal espalhado de tal forma que minimiza a interferência e ruído na saída (Critério do Mínimo Erro Quadrado Médio). Além de testado para o caso de antena única, são avaliadas as performances das configurações de antenas múltiplas para o caso de beamforming e canais espacialmente descorrelacionados considerando sistemas síncronos e sistemas com desalinhamento no tempo dos perfis de canais (ambos UMTS-TDD). Essas configurações divergiam na ordem da combinação temporal, combinação espacial e detecção multiutilizador. As configurações FSC foram avaliadas quando concatenadas com o PIC-2D. Os resultados das simulações mostram consideráveis melhorias nos resultados relativamente ao RAKE-2D convencional e PIC-2D. Foi atingida performance próximo ao RAKE de utilizador único quando o FSC foi avaliado concatenado com PIC-2D em quase todas as configurações. Todas as configurações foram avaliadas com modulação QPSK, 8-PSK e 16-QAM. Foi introduzida codificação Turbo e identificou-se as situações da vantagem de utilização do FSC antes do PIC-2D. As modulações 8-PSK e 16-QAM foram igualmente testadas com codificação.

Relevância do resultado integral: caso da Euronext Lisbon

Dissertação de Mestrado, Contabilidade, Faculdade de Economia, Universidade do Algarve, 2015

Simulação, em software adequado, da sintomatologia vibracional de avarias mecânicas de máquinas rotativas

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica na Área de Manutenção e Produção

Diagnóstico de avarias em máquinas rotativas utilizando a análise de órbitas

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica Perfil Manutenção e Produção

A Saída Voluntária de um Estado membro da Zona Euro (e UE). Caso Concreto de Portugal

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Ciência Política e Relações Internacionais, Especialização de Estudos Europeus.

Occurrence of wide-band tracheids in Cactaceae: wood variation during Pilosocereus auriasetus development

Studies of wide-band tracheids (WBTs) have aroused the interest of researchers who have searched to understand their origin, function, and phylogenetic implications. The present research has the objective of studying the distribution of WBTs, together with anatomic aspects of vegetative organs in different stages of Pilosocereus aurisetus, in order to understand the occurrence of WBTs in columnar cacti. Transverse and longitudinal sections of the stem (apex, middle, and base) and the root were made. The epidermis was present in the photosynthetic stem, but was substituted by periderm which was already well established in the root. The differentiation of the cortex is visible in the middle of the stem, becoming homogeneous in the base. WBTs were observed in the base and middle of young stems (WBT monomorphic wood); common in stems of globular cacti. However, WBTs/ fibrous dimorphic wood was observed in the base of adult stems, a result of the cambial activity producing vessel elements and fibers. This wood polymorphism of the Cactaceae can be interpreted as cambial variation, a common character of Caryophyllales. Due to the small size of the plant, the presence of WBTs in the young stem may be related to water retention necessary for its development, rather than to physical support of the plant.

Seasonality and growth rings in lianas of Bignoniaceae

Lianas are one of the most important components of tropical forest, and yet one of the most poorly known organisms. Therefore, our paper addresses questions on the environmental and developmental aspects that influence the growth of lianas of Bignoniaceae, tribe Bignonieae. In order to better understand their growth, we studied the stem anatomy, seasonality of formation and differentiation of secondary tissues, and the influence of the cambial variant in xylem development on a selected species: Tynanthus cognatus. Afterwards, we compared the results found in T. cognatus with 31 other species of Bignonieae to identify general patterns of growth in lianas of this tribe. We found that cambial activity starts toward the end of the rainy season and onset of the dry season, in contrast to what is known for tropical trees and shrubs. Moreover, their pattern of xylem formation and differentiation is strongly influenced by the presence of massive wedges of phloem produced by a variant cambium. Thus, the variant cambium is the first to commence its activity and only subsequently does cambial activity progress towards the center of the regular region, leading to the formation of confluent growth rings. In summary, we conclude that: the cambium responds to environmental changes; the xylem growth rings are annual and produced in a brief period of about 2 months, something that may explain why lianas possess narrow stems; and furthermore, phloem wedges greatly influence cambial activity.