Litterfall production in intact and selectively logged forests in southern of Amazonia as a function of basal area of vegetation and plant density

Nutrient recycling in the forest is linked to the production and decomposition of litter, which are essential processes for forest maintenance, especially in regions of nutritionally poor soils. Human interventions in forest such as selecttive logging may have strong impacts on these processes. The objectives of this study were to estimate litterfall production and evaluate the influence of environmental factors (basal area of vegetation, plant density, canopy cover, and soil physicochemical properties) and anthropogenic factors (post-management age and exploited basal area) on this production, in areas of intact and exploited forest in southern Amazonia, located in the northern parts of Mato Grosso state. This study was conducted at five locations and the average annual production of litterfall was 10.6 Mg ha-1 year-1, higher than the values for the Amazon rainforest. There were differences in litterfall productions between study locations. Effects of historical logging intensity on litterfall production were not significant. Effects of basal area of vegetation and tree density on litterfall production were observed, highlighting the importance of local vegetation characteristics in litterfall production. This study demonstrated areas of transition between the Amazonia-Cerrado tend to have a higher litterfall production than Cerrado and Amazonia regions, and this information is important for a better understanding of the dynamics of nutrient and carbon cycling in these transition regions.

Estimating the colors of paintings

Observers can adjust the spectrum of illumination on paintings for optimal viewing experience. But can they adjust the colors of paintings for the best visual impression? In an experiment carried out on a calibrated color moni- tor images of four abstract paintings obtained from hyperspectral data were shown to observers that were unfamiliar with the paintings. The color volume of the images could be manipulated by rotating the volume around the axis through the average (a*, b*) point for each painting in CIELAB color space. The task of the observers was to adjust the angle of rotation to produce the best subjective impression from the paintings. It was found that the distribution of angles selected for data pooled across paintings and observers could be de- scribed by a Gaussian function centered at 10o, i.e. very close to the original colors of the paintings. This result suggest that painters are able to predict well what compositions of colors observers prefer.

Desarrollo de sistemas nano/micro-particulados con aplicación en la fotodegradación selectiva de contaminantes orgánicos en solución. Development of nano / micro-particles systems with application to selective photodegradation of organic pollutants in solution.

IDENTIFICACIÓN DEL PROBLEMA DE ESTUDIO. Las sustancias orgánicas solubles en agua no biodegradables tales como ciertos herbicidas, colorantes industriales y metabolitos de fármacos de uso masivo son una de las principales fuentes de contaminación en aguas subterráneas de zonas agrícolas y en efluentes industriales y domésticos. Las reacciones fotocatalizadas por irradiación UV-visible y sensitizadores orgánicos e inorgánicos son uno de los métodos más económicos y convenientes para la descomposición de contaminantes en subproductos inocuos y/o biodegradables. En muchas aplicaciones es deseable un alto grado de especificidad, efectividad y velocidad de degradación de un dado agente contaminante que se encuentra presente en una mezcla compleja de sustancias orgánicas en solución. En particular son altamente deseables sistemas nano/micro -particulados que formen suspensiones acuosas estables debido a que estas permiten una fácil aplicación y una eficaz acción descontaminante en grandes volúmenes de fluidos. HIPÓTESIS Y PLANTEO DE LOS OBJETIVOS. El objetivo general de este proyecto es desarrollar sistemas nano/micro particulados formados por polímeros de impresión molecular (PIMs) y foto-sensibilizadores (FS). Un PIMs es un polímero especialmente sintetizado para que sea capaz de reconocer específicamente un analito (molécula plantilla) determinado. La actividad de unión específica de los PIMs en conjunto con la capacidad fotocatalizadora de los sensibilizadores pueden ser usadas para lograr la fotodescomposición específica de moléculas “plantilla” (en este caso un dado contaminante) en soluciones conteniendo mezclas complejas de sustancias orgánicas. MATERIALES Y MÉTODOS A UTILIZAR. Se utilizaran técnicas de polimerización en mini-emulsión para sintetizar los sistemas nano/micro PIM-FS para buscar la degradación de ciertos compuestos de interés. Para caracterizar eficiencias, mecanismos y especificidad de foto-degradación en dichos sistemas se utilizan diversas técnicas espectroscópicas (estacionarias y resueltas en el tiempo) y de cromatografía (HPLC y GC). Así mismo, para medir directamente distribuciones de afinidades de unión y eficiencia de foto-degradación se utilizaran técnicas de fluorescencia de molécula/partícula individual. Estas determinaciones permitirán obtener resultados importantes al momento de analizar los factores que afectan la eficiencia de foto-degradación (nano/micro escala), tales como cantidad y ubicación de foto- sensibilizadores en las matrices poliméricas y eficiencia de unión de la plantilla y los productos de degradación al PIM. RESULTADOS ESPERADOS. Los estudios propuestos apuntan a un mejor entendimiento de procesos foto-iniciados en entornos nano/micro-particulados para aplicar dichos conocimientos al diseño de sistemas optimizados para la foto-destrucción selectiva de contaminantes acuosos de relevancia social; tales como herbicidas, residuos industriales, metabolitos de fármacos de uso masivo, etc. IMPORTANCIA DEL PROYECTO. Los sistemas nano/micro-particulados PIM-FS que se propone desarrollar en este proyecto se presentan como candidatos ideales para tratamientos específicos de efluentes industriales y domésticos en los cuales se desea lograr la degradación selectiva de compuestos orgánicos. Los conocimientos adquiridos serán indispensables para construir una plataforma versátil de sistemas foto-catalíticos específicos para la degradación de diversos contaminantes orgánicos de interés social. En lo referente a la formación de recursos humanos, el proyecto propuesto contribuirá en forma directa a la formación de 3 estudiantes de postgrado y 2 estudiantes de grado. En las capacidades institucionales se contribuirá al acondicionamiento del Laboratorio para Microscopía Óptica Avanzada (LMOA) en el Dpto. de Química de la UNRC y al montaje de un sistema de microscopio de fluorescencia que permitirá la aplicación de técnicas avanzadas de espectroscopia de fluorescencia de molecula individual. Water-soluble organic molecules such as certain non-biodegradable herbicides, industrial dyes and metabolites of widespread use drugs are a major source of pollution in groundwater from agricultural areas and in industrial and domestic effluents. Photo-catalytic reactions by UV-visible irradiation and organic sensitizers are one of the most economical and convenient methods for the decomposition of pollutants into harmless byproducts. In many applications it is highly desirable a high degree of specificity, effectiveness and speed of degradation of specific pollutants present in a complex mixture. In particular nano/micro-particles systems that form stable aqueous suspensions are highly desirable because they allow for easy application and effective decontamination of large volumes of fluids. Herein we propose the development of nano/micro particles composed by molecularly imprinted polymers (MIP) and photo-sensitizers (PS). The specific binding of MIP and the photo-catalytic ability of the sensitizers are used to achieve the photo-decomposition of specific "template" molecules in complex mixtures. Mini-emulsion polymerization techniques will be used to synthesize nano/micro MIP-FS systems. Spectroscopy (steady-state and time resolved) and chromatography (GC and HPLC) will be used to characterize efficiency, mechanisms and specificity of photo-degradation in these systems. In addition single molecule/particle fluorescence spectroscopy techniques will be used to directly measure distributions of binding affinities and photo-degradation efficiency in individual particles. The proposed studies point to a more detailed understanding of the factors affecting the photo-degradation efficiency in nano/micro-particles and to apply that knowledge in the design of optimized systems for photo-selective destruction of socially relevant aqueous pollutants.

Development of a new method for the characterisation of bioreactors concerning heat and mass transfer

Since the specific heat transfer coefficient (UA) and the volumetric mass transfer coefficient (kLa) play an important role for the design of biotechnological processes, different techniques were developed in the past for the determination of these parameters. However, these approaches often use imprecise dynamic methods for the description of stationary processes and are limited towards scale and geometry of the bioreactor. Therefore, the aim of this thesis was to develop a new method, which overcomes these restrictions. This new approach is based on a permanent production of heat and oxygen by the constant decomposition of hydrogen peroxide in continuous mode. Since the degradation of H2O2 at standard conditions only takes place by the support of a catalyst, different candidates were investigated for their potential (regarding safety issues and reaction kinetic). Manganese-(IV)-oxide was found to be suitable. To compensate the inactivation of MnO2, a continuous process with repeated feeds of fresh MnO2 was established. Subsequently, a scale-up was successfully carried out from 100 mL to a 5 litre glass bioreactor (UniVessel®)To show the applicability of this new method for the characterisation of bioreactors, it was compared with common approaches. With the newly established technique as well as with a conventional procedure, which is based on an electrical heat source, specific heat transfer coefficients were measured in the range of 17.1 – 24.8 W/K for power inputs of about 50 – 70 W/L. However, a first proof of concept regarding the mass transfer showed no constant kLa for different dilution rates up to 0.04 h-1.Based on this, consecutive studies concerning the mass transfer should be made with higher volume flows, due to more even inflow rates. In addition, further experiments are advisable, to analyse the heat transfer in single-use bioreactors and in larger common systems.

Bounding right-arm rotation distances

Rotation distance quantifies the difference in shape between two rooted binary trees of the same size by counting the minimum number of elementary changes needed to transform one tree to the other. We describe several types of rotation distance, and provide upper bounds on distances between trees with a fixed number of nodes with respect to each type. These bounds are obtained by relating each restricted rotation distance to the word length of elements of Thompson's group F with respect to different generating sets, including both finite and infinite generating sets.

Spillover effects of public capital formation: evidence from the spanish regions

Maybe because of the inconclusive nature of the results on the impact of public capital on output at the regional level, the issue of the possible existence of the regional spillovers from public capital formation has received little attention. The objective of this paper is to provide evidence on the possible existence of such spillovers. We consider the case of Spain and its seventeen regions. Our methodological approach consists in estimating an aggregate VAR model for Spain as well as seventeen region-specific VAR models in which both capital installed in the region and capital installed outside the region are allowed to play a role in enhancing regional output. The estimation results can be summarized as follows. The aggregate effects of public capital formation in Spain are important. They cannot, however, be captured in their entirety by the direct effects in each region from public capital installed in the region itself. When for each region both the capital installed in the region and the capital installed outside the region are considered the total disaggregated effect from the seventeen regional models are very much in line with the aggregate results. Furthermore, the aggregate effect seems to be due in almost equal parts to the direct and spillover effects of public capital formation. Ultimately, this paper establishes the relevance of both capital installed in each region and spillover effects in the understanding of the regional decomposition of the aggregate effects of public capital formation. In doing so it opens the door to some tantalizing and potentially highly charged research issues in terms of the determination of the optimal location of public investment projects.

A Multisectorial model of prices: the SAM approach

Social Accounting Matrices (SAM) are normally used to analyse the income generation process. They are also useful, however, for analysing the cost transmission and price formation mechanisms. For price contributions, Roland-Holst and Sancho (1995) used the SAM structure to analyse the price and cost linkages through a representation of the interdependence between activities, households and factors. This paper is a further analysis of the cost transmission mechanisms, in which I add the capital account to the endogenous components of the Roland-Holst and Sancho approach. By doing this I reflect the responses of prices to the exogenous shocks in savings and investment. I also present an additive decomposition of the global price effects into categories of interdependence that isolates the impact on price levels of shocks in the capital account. I use a 1994 Social Accounting Matrix to make an empirical application of the Catalan economy. Keywords: social accounting matrix, cost linkages, price transmission, capital account. JEL Classification: C63, C69, D59.

Safe dissection of the distally based anterolateral thigh flap.

Background The distally based anterolateral thigh (ALT) flap is an interesting reconstructive solution for complex soft tissue defects of the knee. In spite of a low donor site morbidity and wide covering surface as well as arch of rotation, it has never gained popularity among reconstructive surgeons. Venous congestion and difficult flap dissection in the presence of a variable anatomy of the vascular pedicle are the possible reasons.Methods An anatomical study of 15 cadaver legs was performed to further clarify the blood supply of the distally based ALT. Our early experience with the use of preoperative angiography and a safe flap design modification that avoids distal intramuscular skeletonization of the vascular pedicle and includes a subcutaneous strip ranging from the distal end of the flap to the pivot point is presented.Results The distally based ALT presents a constant and reliable retrograde vascular contribution from the superior genicular artery. Preoperative angiography reliably identified and avoided critical Shieh Type II pedicled flaps. The preservation of a subcutaneous strip ranging from the distal flap end to the upper knee was associated with the absence of venous congestion in a short case series.Conclusions Preoperative angiography and a flap design modification are proposed to allow the safe transfer of the distally based ALT to reconstruct soft tissue defects of the knee.

Longitudinal analysis of income-related health inequality: welfare foundations and alternative measures

This paper elaborates the approach to the longitudinal analysis of income-related health inequalities first proposed in Allanson, Gerdtham and Petrie (2010). In particular, the paper establishes the normative basis of their mobility indices by embedding their decomposition of the change in the health concentration index within a broader analysis of the change in “health achievement” or wellbeing. The paper further shows that their decomposition procedure can also be used to analyse the change in a range of other commonly-used incomerelated health inequality measures, including the generalised concentration index and the relative inequality index. We illustrate our work by extending their investigation of mobility in the General Health Questionnaire measure of psychological well-being over the first nine waves of the British Household Panel Survey from 1991 to 1999.

On Measuring the Efficiency of Monetary Policy

Cecchetti et al. (2006) develop a method for allocating macroeconomic performance changes among the structure of the economy, variability of supply shocks and monetary policy. We propose a dual approach of their method by borrowing well-known tools from production theory, namely the Farrell measure and the Malmquist index. Following FÄare et al (1994) we propose a decomposition of the efficiency of monetary policy. It is shown that the global efficiency changes can be rewritten as the product of the changes in macroeconomic performance, minimum quadratic loss, and efficiency frontier.

Joint estimates of automatic and discretionary fiscal policy for the OECD

Official calculations of automatic stabilizers are seriously flawed since they rest on the assumption that the only element of social spending that reacts automatically to the cycle is unemployment compensation. This puts into question many estimates of discretionary fiscal policy. In response, we propose a simultaneous estimate of automatic and discretionary fiscal policy. This leads us, quite naturally, to a tripartite decomposition of the budget balance between revenues, social spending and other spending as a bare minimum. Our headline results for a panel of 20 OECD countries in 1981-2003 are .59 automatic stabilization in percentage-points of primary surplus balances. All of this stabilization remains following discretionary responses during contractions, but arguably only about 3/5 of it remains so in expansions while discretionary behavior cancels the rest. We pay a lot of attention to the impact of the Maastricht Treaty and the SGP on the EU members of our sample and to real time data.

Joint estimates of automatic and discretionary fiscal policy: the OECD 1981-2003

Official calculations of automatic stabilizers are seriously flawed since they rest on the assumption that the only element of social spending that reacts automatically to the cycle is unemployment compensation. This puts into question many estimates of discretionary fiscal policy. In response, we propose a simultaneous estimate of automatic and discretionary fiscal policy. This leads us, quite naturally, to a tripartite decomposition of the budget balance between revenues, social spending and other spending as a bare minimum. Our headline results for a panel of 20 OECD countries in 1981-2003 are .59 automatic stabilization in percentage-points of primary surplus balances. All of this stabilization remains following discretionary responses during contractions, but arguably only about 3/5 of it remains so in expansions while discretionary behavior cancels the rest. We pay a lot of attention to the impact of the Maastricht Treaty and the SGP on the EU members of our sample and to real time data.

Joint estimates of automatic and discretionary fiscal policy: the OECD 1981-2003

Official calculations of automatic stabilizers are seriously flawed since they rest on the assumption that the only element of social spending that reacts automatically to the cycle is unemployment compensation. This puts into question many estimates of discretionary fiscal policy. In response, we propose a simultaneous estimate of automatic and discretionary fiscal policy. This leads us, quite naturally, to a tripartite decomposition of the budget balance between revenues, social spending and other spending as a bare minimum. Our headline results for a panel of 20 OECD countries in 1981-2003 are .59 automatic stabilization in percentage-points of primary surplus balances. All of this stabilization remains following discretionary responses during contractions, but arguably only about 3/5 of it remains so in expansions while discretionary behavior cancels the rest. We pay a lot of attention to the impact of the Maastricht Treaty and the SGP on the EU members of our sample and to real time data.

The Analysis of Accounting Multipliers: The NAMEA Approach in the Case of Catalonia

The aim of this paper is the analysis of the Catalan economy (2001) with the use of a National Accounting Matrix with environmental accounts (NAMEA) for the Catalan economy with 2001 data. We will focus on the analysis of the emission multipliers and we will also analyse the impact of a 10% reduction in greenhouse emissions on emission multipliers. This emission-reduction percentage would bring the Catalan economy into compliance with the maximum emissions level allowed by the Kyoto Protocol. We consider three possible scenarios that would allow this goal to be met. First, we will simulate a 10% reduction in regional emissions and a 5% drop in the endogenous income of the multipliers' model (production, factorial and private income). Second, we will simulate a 10% reduction in emissions and a 10% increase in endogenous income. Finally, we will simulate a 10% reduction in emissions and a 5% increase in endogenous income. Additionally, we will analyse the decomposition of the emission multipliers into own effects, open effects and circular effects to capture the different channels of the emission generation process. Keywords: NAMEA, emission multipliers, Kyoto Protocol.

Structural decomposition analysis and input-output subsystems: An application to Spanish CO2 emissions

Analysis of gas emissions by the input-output subsystem approach provides detailed insight into pollution generation in an economy. Structural decomposition analysis, on the other hand, identifies the factors behind the changes in key variables over time. Extending the input-output subsystem model to account for the changes in these variables reveals the channels by which environmental burdens are caused and transmitted throughout the production system. In this paper we propose a decomposition of the changes in the components of CO2 emissions captured by an input-output subsystems representation. The empirical application is for the Spanish service sector, and the economic and environmental data are for years 1990 and 2000. Our results show that services increased their CO2 emissions mainly because of a rise in emissions generated by non-services to cover the final demand for services. In all service activities, the decomposed effects show an increase in CO2 emissions due to a decrease in emission coefficients (i.e., emissions per unit of output) compensated by an increase in emissions caused both by the input-output coefficients and the rise in demand for services. Finally, large asymmetries exist not only in the quantitative changes in the CO2 emissions of the various services but also in the decomposed effects of these changes. Keywords: structural decomposition analysis, input-output subsystems, CO2 emissions, service sector.