Strontium isotope ratios and concentrations in fossil fish teeth

We analyzed 87Sr/86Sr ratios in foraminifera, pore fluids, and fish teeth for samples ranging in age from Eocene to Pleistocene from four Ocean Drilling Program sites distributed around the globe: Site 1090 in the Cape Basin of the Southern Ocean, Site 757 on the Ninetyeast Ridge in the Indian Ocean, Site 807 on the Ontong-Java Plateau in the western equatorial Pacific, and Site 689 on the Maud Rise in the Southern Ocean. Sr isotopic ratios for dated foraminifera consistently plot on the global seawater Sr isotope curve. For Sites 1090, 757, and 807 Sr isotopic values of the pore fluids are generally less radiogenic than contemporaneous seawater values, as are values for fossil fish teeth. In contrast, pore fluid 87Sr/86Sr values at Site 689 are more radiogenic than contemporaneous seawater, and the corresponding fish teeth also record more radiogenic values. Thus, Sr isotopic values preserved in fossil fish teeth are consistently altered in the direction of the pore fluid values; furthermore, there is a correlation between the magnitude of the offset between the pore fluids and the seawater curve, and the associated offset between the fish teeth and the seawater curve. These data suggest that the hydroxyfluorapatite of the fossil fish teeth continues to recrystallize and exchange Sr with its surroundings during burial and diagenesis. Therefore, Sr chemostratigraphy can be used to determine rough ages for fossil fish teeth in these cores, but cannot be used to fine-tune age models. In contrast to the Sr isotopic system, our Nd concentration data, combined with published isotopic and rare earth element data, suggest that fish teeth acquire Nd during early diagenesis while they are still in direct contact with seawater. The concentrations of Nd acquired at this stage are extremely high relative to the concentrations in surrounding pore fluids. As a result, Nd isotopes are not altered during burial and later diagenesis. Therefore, fossil fish teeth from a variety of marine environments preserve a reliable and robust record of deep seawater Nd isotopic compositions from the time of deposition.

Gas hydrate structures and C1-C5 hydrocarbons at individual sites in the Gulf of Mexico

Gas hydrate samples from various locations in the Gulf of Mexico (GOM) differ considerably in their microstructure. Distinct microstructure characteristics coincide with discrete crystallographic structures, gas compositions and calculated thermodynamic stabilities. The crystallographic structures were established by X-ray diffraction, using both conventional X-ray sources and high-energy synchrotron radiation. The microstructures were examined by cryo-stage Field-Emission Scanning Electron Microscopy (FE-SEM). Good sample preservation was warranted by the low ice fractions shown from quantitative phase analyses. Gas hydrate structure II samples from the Green Canyon in the northern GOM had methane concentrations of 70-80% and up to 30% of C2-C5 of measured hydrocarbons. Hydrocarbons in the crystallographic structure I hydrate from the Chapopote asphalt volcano in the southern GOM was comprised of more than 98% methane. Fairly different microstructures were identified for those different hydrates: Pores measuring 200-400 nm in diameter were present in structure I gas hydrate samples; no such pores but dense crystal surfaces instead were discovered in structure II gas hydrate. The stability of the hydrate samples is discussed regarding gas composition, crystallographic structure and microstructure. Electron microscopic observations showed evidence of gas hydrate and liquid oil co-occurrence on a micrometer scale. That demonstrates that oil has direct contact to gas hydrates when it diffuses through a hydrate matrix.

Mineralogical, geochemical, and lipid biomarker study of cabonate precipitates at station GeoB9908-1

Carbonate precipitates recovered from 2,000 m water depth at the Dolgovskoy Mound (Shatsky Ridge, north eastern Black Sea) were studied using mineralogical, geochemical and lipid biomarker analyses. The carbonates differ in shape from simple pavements to cavernous structures with thick microbial mats attached to their lower side and within cavities. Low d13C values measured on carbonates (-41 to -32 per mill V-PDB) and extracted lipid biomarkers indicate that anaerobic oxidation of methane (AOM) played a crucial role in precipitating these carbonates. The internal structure of the carbonates is dominated by finely laminated coccolith ooze and homogeneous clay layers, both cemented by micritic high-magnesium calcite (HMC), and pure, botryoidal, yellowish low-magnesium calcite (LMC) grown in direct contact to microbial mats. d18O measurements suggest that the authigenic HMC precipitated in equilibrium with the Black Sea bottom water while the yellowish LMC rims have been growing in slightly 18O-depleted interstitial water. Although precipitated under significantly different environmental conditions, especially with respect to methane availability, all analysed carbonate samples show lipid patterns that are typical for ANME-1 dominated AOM consortia, in the case of the HMC samples with significant contributions of allochthonous components of marine and terrestrial origin, reflecting the hemipelagic nature of the primary sediment.

Determinación del coeficiente de rozamiento grano-pared en silos de pared corrugada mediante el método de los elementos discretos

El comportamiento de los materiales granulares almacenados en silos se ve afectado por varios parámetros, tanto aquellos característicos del material como de la geometría del silo. La determinación del coeficiente de rozamiento pared-partícula es uno de los parámetros de mayor importancia, siendo habituales en su determinación el uso de ensayos de corte directo. En el presente trabajo se estudia dicho coeficiente para el supuesto de una pared corrugada, el cual, teóricamente, debe representar a un valor efectivo que depende tanto del coeficiente de rozamiento grano-pared (para el caso de una pared lisa) y el ángulo de rozamiento interno del material. La determinación del rozamiento efectivo se ha realizado a través de la simulación por elementos discretos de un ensayo de corte sobre una pared corrugada. Los valores obtenidos han sido comparados con las prescripciones expuestas en la normativa vigente. La potencialidad del método de los elementos discretos permite el estudio de diversas configuraciones geométricas de la pared corrugada de los silos sin necesidad de realizar ensayos de laboratorio. Esto permitirá, en trabajos sucesivos, investigar la influencia de muy diversos factores en el valor del rozamiento efectivo grano-pared en este tipo de paredes. The mechanical behaviour of granular materials stored in silos is affected by numerous parameters, some of them being related to the characteristic of the stored materials and others to the geometry of the silo. The determination of the particle-wall friction coefficient (or wall friction) is of great importance and direct shear tests are usually conducted in order to obtain its value. In this work this variable is analysed for the case of a corrugated wall. This value is expected to be an effective value between the particle-wall friction coefficient (obtained for a flat wall) and the internal friction coefficient of the material under study. The effective wall friction determination has been carried out by using a discrete element model to simulate a direct shear test on a corrugated wall. The values obtained have been compared with prescriptions given in the current standards. The potential of the discrete element method allows different geometries of the silo corrugated wall to be considered without the necessity of developing laboratory tests. In future works it will allow the influence of numerous parameters on the effective wall friction in corrugated walls to be studied.

Introducing Nuclear Energy to High-School Students: The Spanish Young Generation in Nuclear (Jóvenes Nucleares) Lectures

One of the main goals of Spanish Young Generation (JJNN) is to spread knowledge about nuclear energy, not only pointing out its advantages and its role in our society, but also trying to correct some of the ideas that are due to the biased information and to the lack of knowledge. With this goal in mind, lectures were given in several high schools, aimed at students ranging from 14 to 18 years old. This paper explains the experience accumulated during those talks and the conclusions that can be drawn, so as to better focus the communication about nuclear energy, especially the one aimed at a young public. In order to evaluate the degree of knowledge and information on a specific topic of a given group of individuals, statistical methods must be used. At the beginning of each lecture (and sometimes at the end, in order to evaluate the impact of the talk) the students were submitted to a short survey conducted by Spanish Young Generation. It consisted in eight questions, dealing with the relation between the main environmental issues (global warming, acid rain, radioactive waste…) and nuclear energy. The answers can be surprising, especially for professionals of the nuclear field who, since they are so familiar with this topic, often forget that this is just the case of a minority of people. A better knowledge of the degree of information of a given group enables to focus and personalize the communication. Another communication tool is the direct contact with students: it starts with their questions, which can then lead to a small debate. If the surveys inform about the topics they are unaware of, the direct exchange with them enables to find the most effective way to provide them the information. Of course, it depends a lot on the public attending the talk (age, background…) and on the debate following the talk: a good communication, adapted to the public, is necessary. Therefore, the outcome of the performed exercise is that Spanish teenagers have still a lack of knowledge about nuclear energy. We can learn that items that are evident for nuclear young professionals are unknown for high school teenagers

Modelización de contactos termoelastohidrodinámicos

La mejora en la eficiencia energética y la reducción de la tasa de fallos en los contactos lubricados son aspectos que resultan de gran interés en numerosos sectores de la industria, y plantean en estos momentos nuevas dificultades operativas y retos para un futuro próximo. Los avances tecnológicos han incrementado las exigencias técnicas que se requieren a los aceites para cumplir su función al extender sus variables operativas a un mayor espectro de aplicaciones, tanto de condiciones de funcionamiento como a la gran variedad de nuevos materiales constitutivos de los engranajes en los que se tiene que utilizar. Por ello, actualmente se está incentivado el desarrollo de nuevos procedimientos que permitan comprender el comportamiento de este tipo de contactos lubricados, con el fin de lograr mejoras técnicas en su diseño y la correcta selección del aceite. En esta Tesis Doctoral se presenta una metodología de cálculo numérico que permite simular el comportamiento de contactos elastohidrodinámicos (EHD) puntuales, como puede ser el caso de un rodamiento. La resolución de este problema presenta diversas complejidades matemáticas y exige el desarrollo de un elaborado procedimiento de cálculo basado en técnicas multinivel. Para hacer del procedimiento una herramienta válida en un gran número de condiciones de funcionamiento y tipos de lubricantes, se ha tenido en cuenta en el cálculo la posible aparición de comportamientos no-Newtonianos del lubricante y fenómenos de generación y disipación de calor, provocados por el movimiento relativo del fluido y las superficies en contacto. Para la validación del procedimiento, se han contrastado los resultados numéricos obtenidos con nuestro método, con los resultados numéricos y experimentales publicados por otros autores y con valores experimentales propios medidos en un equipo de ensayo de contacto puntual tipo MTM. El desarrollo de este programa ha dotado a la División de Ingeniería de Máquinas de una herramienta que ha permitido, y sobre todo va permitir, evaluar la importancia de cada uno de los parámetros reológicos en los diferentes problemas que va a tener que abordar, evaluación que hasta el momento se realizaba con métodos aproximados que describen la fenomenología con mucha menos precisión. A la hora de emplear nuestro procedimiento numérico para simular situaciones reales, nos hemos encontrado con el obstáculo de que es muy complicado encontrar, en la bibliografía y bases de datos, los parámetros que caracterizan el comportamiento reológico del lubricante en las condiciones de presión, temperatura y grado de cizallamiento habituales en las que se trabaja en este tipo de contactos, y las pocas medidas que existen para estas condiciones de funcionamiento son poco fiables. Por ello como complemento al objetivo principal de esta Tesis hemos desarrollado una metodología para caracterizar los lubricantes en estas condiciones extremas. Dicha metodología está basada en la buena descripción que hace nuestro programa del coeficiente de fricción, lo que nos ha permitido obtener los parámetros reológicos del III lubricante a partir de las medidas experimentales del coeficiente de fricción generado en un equipo MTM lubricado con el lubricante que se desea caracterizar. Madrid, Octubre de 2012 IV Improving energy efficiency and reducing the failure rate in lubricated contacts are issues that are of great interest in many sectors of industry, and right now posed operational difficulties and new challenges for the near future. Technological advances have increased the technical demands required to oils to fulfil its role by extending its operational variables to a wider range of applications, both operating conditions and to the wide variety of new materials which constitute the gear in which must be used. For this reason, has being encouraged currently to develop new procedures to understand the behaviour of this type of lubricated contacts, in order to achieve improvements in design techniques and the correct oil selection. In this Thesis we present a numerical methodology to simulate the puntual elastohydrodynamic contact behaviour (EHD), such as a roller bearing. The resolution of this problem presents various mathematical complexities and requires the development of an elaborate calculation procedure based on multilevel techniques. To make the procedure a valid tool in a wide range of operating conditions and types of lubricants, has been taken into account in calculating the possible occurrence of non-Newtonian behaviour of the lubricant and phenomena of generation and dissipation of heat, caused by the fluid relative motion and contacting surfaces. For the validation of the method, we have compared the numerical results obtained with our method with numerical and experimental results published by other authors also with own experimental values measured on point-contact test equipment MTM. The development of this program has provided the Machines Engineering Division of a tool that has allowed, and especially will allow to evaluate the importance of each of the rheological parameters on the various problems that will have to be addressed, evaluation performed hitherto described methods that phenomenology approximated with much less accuracy. When using our numerical procedure to simulate real situations we have encountered the obstacle that is very difficult to find, in the literature and database, parameters characterizing the rheological behaviour of the lubricant in the usual conditions of pressure, temperature and shear rate in which you work in this type of contact, and the few measures that exist for these operating conditions are unreliable. Thus in addition to the main objective of this thesis, we have developed a methodology to characterize the lubricants in these extreme conditions. This methodology is based on the good description, which makes our program, of the coefficient of friction, that allowed us to obtain the lubricant rheological parameters from experimental measurements of the friction coefficient generated on lubricated MTM equipment with the lubricant to be characterized.

Wedged analog tunable beam steering device based on cholesteric liquid crystals

In this work we propose a novel cholesteric liquid crystal beam steering device based on the Kerr effect. The first version of the device consists of two ITO coated glass plates, with intentionally prepared electrodes, assembled together with a thickness gradient between both sides of the device. One side of the cell has two substrates at direct contact; the other side has separated substrates to form the wedge. The cell was filled with a cholesteric liquid crystal. The liquid crystal material is an innovative mixture called 1892E with extremely low viscosity doped with a ZLI chiral nematogen. The proposed beam steering device based on cholesteric liquid crystals has great potential for many photonic applications. Results describing the performance of the device and the properties of the selected liquid crystals are presented.

Estrategias de Apropiación, Transformación y Usos en la Fábrica de Tabacos de Madrid

Tabacalera se presenta como un importante caso de estudio en cuanto a la posibilidad de gestión de dos actores completamente opuestos, el Centro Social Autogestionado La Tabacalera y Tabacalera Promoción del Arte, en los que se hace hincapié en la distinción de las distintas maneras de resolución que se han generado en un mismo edificio. Se pretende, mediante el análisis del caso específico, Tabacalera de Lavapiés, con una serie de cartografías, entrevistas y el contacto directo con sus participantes, rescatar estrategias y mecanismos de actuación que promuevan la gestión participativa, usuario/comunidad y sector público. Tomando la experiencia de este caso específico, se pretende desvelar métodos de actuación para aplicarse en contextos diferentes, concretamente en realidades latinoamericanas, donde el desarrollo desordenado y acelerado de las ciudades ha generado una serie de inmuebles de valor histórico en situación de ocupación informal con potencialidad de reactivación. Entender el fenómeno Tabacalera es una oportunidad en la que un referente promueve además de la reactivación de un inmueble en desuso, la participación de la comunidad de manera directa, proponiendo mediante una serie de técnicas de observación e implicación directa dentro de su estructura de funcionamiento, el estudio del real impacto inmediato en el edificio y la forma en la cual colectivos sociales y usuarios, se apropian de su espacio inmediato. Tabacalera is presented as an important case study as to the possibility of managing two completely opposing players, the Centro Social Autogestionado La Tabacalera and Tabacalera Promoción del Arte, where he emphasizes different ways of resolution have been generated by same building. It is intended by analyzing the specific case, Tabacalera de Lavapies, with a series of maps, interviews and direct contact with your participants, rescue strategies and mechanisms of action that promote participatory management, user / community and public sector. Taking the experience of this specific case, trying to reveal methods of action that could be applied in different contexts, specifically Latin American realities, where the disorderly and accelerated urban development has generated a number of properties of historical value in situations of informal employment with potential of reactivation. You understand the Tabacalera phenomenon is exhibited as an opportunity in which a reference also promotes the reactivation of a building into disuse the participation of the community directly, proposing through a series of techniques of observation and direct involvement within their structure working, studying real immediate impact on the building and the way in which social groups and users, appropriate their immediate space.

Análisis de la durabilidad de la cubierta plana invertida, a través del estudio de las interacciones e incompatibilidades entre las membranas sintéticas y el poliestireno extrusionado

La cubierta plana invertida se forma, cuando sobre una membrana impermeable se coloca un aislamiento térmico. Estos materiales pueden separarse con capas auxiliares que impiden el contacto directo entre ellos. Muchos de los materiales que forman esta solución constructiva pueden ser polímeros, como lo son algunas membranas impermeables, las capas auxiliares separadoras o el poliestireno extrusionado (XPS). La mayoría de los polímeros son incompatibles entre sí, por lo que en esta tesis se plantea como hipótesis la posibilidad de que se produzcan interacciones e incompatibilidades entre algunos de estos materiales. Por ello se hace una búsqueda bibliográfica y documental de otras investigaciones que pudieran estar relacionadas con el tema, y se estudian y analizan normas y documentación facilitada por fabricantes. Sin embargo, tras consultar toda la bibliografía y documentación que se referencia en esta tesis doctoral, no fue encontrado ningún trabajo de investigación sobre la influencia de la interacción entre los materiales que componen las cubiertas planas invertidas, y de cómo afecta esta a la durabilidad de las mismas. El propósito de esta tesis es el análisis de la durabilidad de la cubierta plana invertida, desde el punto de vista de las interacciones e incompatibilidades que pueden producirse entre los materiales formantes de esta solución constructiva. Además de este objetivo general, se estudian alternativas que puedan prolongar el ciclo de vida de la cubierta plana invertida. Para ello, se desarrolla un plan experimental con el fin de analizar dichas incompatibilidades, y estudiar los factores que las condicionan. Algunos de los resultados obtenidos, muestran que determinadas láminas impermeables utilizadas normalmente para la construcción de cubiertas planas, pueden interactuar con el XPS y sufrir deterioro. El contacto con el mismo, la incorrecta separación, la presión y el calor, son factores determinantes para que se produzca deterioro. Se puede señalar como una de las conclusiones de esta investigación, que la protección térmica que proporciona el XPS a la cubierta plana invertida, puede no ser suficiente (dependiendo del espesor del mismo, y de la ubicación de la cubierta fundamentalmente), para reducir la cantidad de calor que alcanza la línea de contacto entre los materiales, y por tanto paliar las interacciones que se producen. Además, aunque los geotextiles utilizados como capas auxiliares separadoras, en los gramajes por metro cuadrado, recomendados por algunas de las normas reguladoras de este tipo de cubiertas minoran las interacciones, estas siguen produciéndose. ABSTRACT The inverted flat roof is formed from a waterproofing membrane on which the thermal insulation is placed. These materials may be separated with auxiliary layers, which prevent the direct contact between them. Many of the materials forming this constructive solution can be polymers, such as some waterproofing membranes, the auxiliary separating layers, or the extruded polystyrene board (XPS). Most polymers are incompatible, so this thesis hypothesized that interactions and incompatibilities between some of these materials might be possible. Therefore, a literature search, and other documentation that could be related to the topic, are studied and analyzed, as well as, standards and documentation provided by manufacturers. However, after consulting all literature and documents referenced in this dissertation, it was not found any research about the influence of interaction between the materials forming the inverted flat roof, and how this affects to the durability of them. The purpose of this thesis is the analysis of the durability of the inverted flat roof, from the point of view of interactions and incompatibilities may occur between the materials setting up this constructive solution. Along with this general objective, alternatives that can prolong the life cycle of the inverted roof are studied. To get this, an experimental plan is developed, in order to analyze these incompatibilities, and study the factors conditioning them. Some of the results show, that certain normally used waterproofing laminas for building flat roofs, may interact with XPS producing lamina deterioration. Contact, incorrect separation, pressure and heat, are determinant factors for degradation. It can be pointed out, as one of the conclusions of this research, that the thermal protection provided by XPS to the inverted flat roof, cannot be enough (depending on the XPS thickness, and the location of the flat mainly) to reduce the amount of heat that reaches the contact line between materials, and thus to cut down interactions. Furthermore, although geotextiles used as auxiliary separating layers, within the weights per square meter recommended by some of the regulating rules of this type of roofs reduce interactions, these still occur.

Maintaining distances with the engineer: patterns of coexistence in plant communities beyond the patch-bare dichotomy

Two-phase plant communities with an engineer conforming conspicuous patches and affecting the performance and patterns of coexisting species are the norm under stressful conditions. To unveil the mechanisms governing coexistence in these communities at multiple spatial scales, we have developed a new point-raster approach of spatial pattern analysis, which was applied to a Mediterranean high mountain grassland to show how Festuca curvifolia patches affect the local distribution of coexisting species. We recorded 22 111 individuals of 17 plant perennial species. Most coexisting species were negatively associated with F. curvifolia clumps. Nevertheless, bivariate nearest-neighbor analyses revealed that the majority of coexisting species were confined at relatively short distances from F. curvifolia borders (between 0-2 cm and up to 8 cm in some cases). Our study suggests the existence of a fine-scale effect of F. curvifolia for most species promoting coexistence through a mechanism we call 'facilitation in the halo'. Most coexisting species are displaced to an interphase area between patches, where two opposite forces reach equilibrium: attenuated severe conditions by proximity to the F. curvifolia canopy (nutrient-rich islands) and competitive exclusion mitigated by avoiding direct contact with F. curvifolia.

Validación de HP UV-LED para la detección en continuo de contaminantes en aguas continentales mediante fluorescencia

La preservación del medio ambiente, el avance en las técnicas para que el impacto de la actividad humana sobre la fauna y flora sea lo menor posible, hacen que se deban monitorizar los diversos indicadores de calidad. El presente estudio viene motivado debido a que actualmente existen sistemas de medida y control en continuo de la calidad de las aguas, al margen de los estudios de laboratorio por toma de muestras, a través de los cuales se obtienen indicadores de calidad. El desarrollo tecnológico en analizadores en continuo para la medida de fósforo, amonio, DBO y otros, hacen que cada vez se consiga un control más exhaustivo de la calidad en tiempo real. Sin embargo, la detección temprana de contaminantes que no deben encontrarse presentes en el agua, hacen que el desarrollo de sensores de detección de estos contaminantes sea de gran utilidad. A este respecto, las técnicas mediante fluorescencia presentan enormes ventajas, ya que no existe contacto directo con la muestra, reduciéndose el desgaste y alargando el tiempo entre mantenimientos, como se ha comprobado en numerosos desarrollos con tecnología láser. Para la producir fluorescencia, tradicionalmente se vienen utilizando en el laboratorio principalmente lámparas de gas y monocromadores. Los nuevos LED de alta potencia en el espectro ultravioleta son una alternativa muy interesante que además puede ser aplicada en los mencionados sistemas de medición en continuo. En este trabajo se realiza un estudio de viabilidad de estos dispositivos como fuentes de excitación para la producción de fluorescencia tomando como contaminantes los hidrocarburos. El funcionamiento en estaciones en continuo hace que se tenga que realizar además ensayos de vida acelerados, así como estudios de modos de trabajo. Al respecto de la fluorescencia producida, se estudia la influencia de factores que pueden afectar a las medidas, tales como la temperatura. El estudio del espectro y su análisis para la identificación del contaminante es otro de los puntos desarrollados en este trabajo. Por último, y dado que la monitorización se realiza en modo continuo, es necesario un sistema de comunicaciones compacto y fiable: en este apartado se analizan los metamateriales como solución tecnológica, ya que se adapta perfectamente a la filosofía de estas estaciones de medición. ABSTRACT Currently the monitoring of quality indicators is a need to preserve the environment and minimize the impact of human activity on the fauna and flora. Currently there are measuring systems and continuous monitoring of water quality, regardless of sampling laboratory studies, through which quality indicators are obtained. Technological development in continuous analyzers for the measurement of phosphorus, ammonia, BOD and others increasingly make a more comprehensive real-time quality control is achieved. However, early detection of contaminants that should not be present in the water, make the development of sensors for detecting these contaminants is very useful. In this regard, fluorescence techniques have huge advantages, since there is no direct contact with the sample, reducing wear and extending the time between maintenance, as has been demonstrated in numerous developments in laser technology. To produce fluoresce, traditionally are being used mainly gas lamps and monochromators at the laboratory. The new high-power LEDs in the ultraviolet spectrum are a very interesting alternative that can also be applied in the above continuous measurement systems. In this paper a viability study of these devices as excitation sources to produce fluorescence using hydrocarbon as contaminants is performed. The stations in continuous operation makes it necessary to also perform accelerated life tests and studies operating modes. In regard to the fluorescence produced, the influence of factors that may affect the measurements, such as temperature is studied. The study of the spectrum and analysis to identify the contaminant is another of the points developed in this work. Finally, since the monitoring is carried out in continuous mode, a compact and reliable communication is necessary: in this section metamaterials as a technological solution is analyzed since it fits perfectly with the philosophy of these measuring stations.

La Revista El Arquitecto Peruano: reseña de la Cultura Arquitectónica del Perú 1937/1977

La tesis se centra en el análisis de 356 números de la revista El Arquitecto Peruano publicados entre 1937 y 1977. La revista fue fundada en agosto de 1937 por Fernando Belaúnde Terry, arquitecto graduado en la University of Texas at Austin en 1935 quien la dirigió por 25 años hasta marzo de 1963. Desde abril de 1963 la dirige Miguel Cruchaga Belaunde. Durante esta última etapa la revista deja de ser regular, publicándose intermitentemente con varios años sin editarse, hasta desaparecer finalmente en 1977. La revista es la publicación periódica de arquitectura más importante del siglo XX en el Perú. La investigación ubica a la revista en el contexto nacional donde se desarrolló vinculando además los diversos eventos de la arquitectura y el urbanismo del panorama internacional sucedidos durante las tres décadas de estudio. El trabajo empieza por establecer una secuencia de periodos. Esta se basa en la identificación de una estructura fija existente en la revista conformada por las secciones permanentes. Una paulatina inserción de secciones temporales fue complementando y detallando nuevas temáticas y contenidos generando variantes de la estructura fija a lo largo del tiempo. Como resultado de este proceso se reconocen 5 periodos vinculados a una serie de temas vertebrales durante la dirección de Fernando Belaunde: Periodo 1 (Agosto de 1937 a marzo de 1942). Vivienda Unifamiliar. Periodo 2 (Abril de 1942 a mayo de 1944). Urbanismo moderno. Periodo 3 (Junio de 1944 a diciembre de 1949). Vivienda Colectiva. Periodo 4 (Enero-febrero de 1950 a enero-febrero de 1956). Proyectos y obras. Periodo 5 (Marzo-abril de 1956 a enero-febrero-marzo de 1963). Territorio. Los años finales bajo la dirección de Miguel Cruchaga conforman el último Periodo. En la década de los treinta, durante el primer periodo se analiza el rol que un grupo de revistas de arquitectura europeas y norteamericanas tuvieron en la construcción formal y temática de El Arquitecto Peruano. En sus inicios existen influencias de The Architectural Forum, The American Architect, Architecture, California Arts and Architecture y Architectural Digest . Y junto a estas, las revistas alemanas Moderne Bauformen e Innen Dekoration. A raíz de la Segunda Guerra Mundial, las referencias a las revistas alemanas desaparecen y las relaciones con Estados Unidos se intensifican por la posición del Perú dentro del área de influencia norteamericana. El canal de las revistas no fue el único medio de influencia, durante los años cuarenta hubo un marco de apertura hacia Latinoamérica que incluyó viajes de cooperación de arquitectos norteamericanos por el sur del continente. Como parte de estos vínculos, en 1945 Paul Lester Wiener de Town Planning Associates y Richard Neutra, - ambos miembros del CIAM y el segundo Presidente del CIAM USA- prestaron asistencia a la iniciativa más importante promovida por la revista peruana, un proyecto de vivienda popular para obreros y empleados llamado el Plan Peruano. La revista tuvo siempre una fuerte actitud de cambio de la realidad existente en el medio peruano. Para modelar su nueva versión de la realidad instrumentó una serie de campañas de prensa. En la más importante utilizó las ideas del urbanismo moderno que circulaban durante la guerra nacidas en los CIAM de entreguerras. El Arquitecto Peruano aprovecha la coyuntura de los primeros años de la posguerra para canalizar sus iniciativas, tomando como modelo de su propuesta la idea de la Neighborhood Unit, convirtiéndolo en proyecto y finalmente construyendo la Unidad Vecinal N°3, el proyecto de mayor escala asociado con la revista. A esta perspectiva favorable para las ideas vertidas por la publicación se une el hecho de que su Director, es elegido Diputado por Lima y es un miembro muy cercano al gobierno de turno que dio la cobertura legal y de gestión para cristalizar los proyectos desde 1945 hasta 1948. Durante este periodo se producen las propuestas de mayor alcance promovidas por Fernando Belaunde y difundidas por la revista, como el propio Plan Peruano de Vivienda, los Centros Climáticos de Invierno, el Plan Piloto de Lima y los Concursos de Vivienda popular. Existe un trabajo anterior sobre la revista, restringido al campo del urbanismo realizado en 1992 por el historiador Antonio Zapata y titulado El joven Belaunde: Historia de la revista El Arquitecto Peruano en donde se inclina el peso de la revista hacia la Vivienda Social y se señala a Walter Gropius como el arquitecto más influyente en la publicación. La presente tesis plantea que el Plan Peruano es la punta del iceberg, pero que todos estos proyectos relacionados con la revista, conforman un conjunto indisoluble y que el paquete completo tiene una directa influencia de proyectos, ideas y labor editorial de José Luis Sert desarrollada desde finales de los años veinte hasta los años cincuenta. Sus libros Can Our Cities Survive? , The Heart of the City y la revista del GATEPAC AC Documentos de Actividad Contemporánea tienen improntas claras en la revista peruana que atraviesan tres de los periodos propuestos. Durante la década de los cuarenta cuando Sert junto a Wiener fueron socios en Town Plannning Associates y tuvieron contacto directo con el director de la revista así como con los principales colaboradores, y durante la década posterior. A la luz de las evidencias analizadas, la figura de José Luis Sert emerge como la del arquitecto más influyente para la revista El Arquitecto Peruano a lo largo de todo su recorrido. ABSTRACT The thesis focuses on the analysis of 356 issues of the magazine El Arquitecto Peruano published between 1937 and 1977. The magazine was founded in august 1937 by Fernando Belaunde Terry, graduated from the University of Texas at Austin in 1935 who leaded it 25 years until March 1963. Since April 1963 was leaded by Miguel Cruchaga Belaunde. During this last stage the magazine ceases to be published on regular times, being published intermittently, unreleased several years, and finally disappear in 1977. El Arquitecto Peruano is the most important magazine of architecture of the twentieth century in Peru. The research located the magazine in the national context where was developed further by linking the various events of architecture and urbanism of the international scene occurred during the three decades of study. The research begins to establish a sequence of periods. This identification is based on a fixed structure existing in the journal formed by the permanent sections. A gradual insertion of temporary sections was complementing and detailing new themes and contents generating variants of the fixed structure over time. As a result of this process we recognize five periods linked to a series of central themes developed under the lead of Fernando Belaunde: Period 1 (September 1937 to March 1942): The Small House. Period 2 (April 1942 to May 1944). Modern urbanism. Period 3 (June 1944 to December 1949). Housing. Period 4 (January-February 1950 January-February 1956). Projects and Buildings. Period 5 (March-April 1956 January-February-March 1963). Territory. The final years under the direction of Miguel Cruchaga make the last Period. In the thirties, during the first period, is analyzed the role that a group of European and American magazines in architecture had in formal construction and thematic of the magazine. In the beginning there are influences of The Architectural Forum, The American Architect, Architecture, California Arts and Architecture and Architectural Digest. And along with these, the german magazine Moderne Bauformen and Innen Dekoration. Following World War II, the references to german magazines disappear and US relations are intensified by the position of Peru in the area of US influence. The magazines was not the only ways of influence, during the forties there was an open framework with Latin America that included cooperation trips of american architects on the south of the continent. As part of these links, in 1945 Paul Lester Wiener of Town Planning Associates and Richard Neutra, -both members of CIAM and the second President of the CIAM USAassisted the most important initiative promoted by the peruvian magazine, a popular housing project for workers and employees called El Plan Peruano. The magazine always has a strong attitude of change of the reality in the peruvian scene. To model the new version of reality created a series of media campaigns. In the biggest it used the ideas of modern urbanism that circulated during the war born in the CIAM of twenties and thirties. El Arquitecto Peruano take advantage of the situation of the early postwar years to direct their initiatives, modeled his proposal with the idea of Neighborhood Unit, making project and finally building the Unidad Vecinal N° 3, the larger scale project linked with the magazine. This favorable outlook for the ideas expressed by the publication joins the fact that its Director is elected deputy for Lima and is very close member to the current government who gave legal instruments and management to crystallize projects from 1945 to 1948. During this period of far-reaching proposals promoted by Fernando Belaunde and diffused by the magazine, as El Plan Peruano itself, the Centros Climaticos de Invierno, the Plan Piloto for Lima and the Concusos de Vivienda Popular. There is an earlier work on the magazine, restricted to the field of urbanism in 1992 by historian Antonio Zapata, entitled El Joven Belaunde: Historia de la revista El Arquitecto Peruano where the weight of the magazine leans Social Housing and notes Walter Gropius as the most influential architect in the publication. This thesis suggests that El Plan Peruano is the end of the iceberg, but these related projects to the magazine, form an inseparable whole and that the whole package has a direct influence of projects, ideas and editorial work of José Luis Sert developed from late twenties to the fifties. His book Can Our Cities Survive? , The Heart of the City and the magazine of GATEPAC AC Documentos de Actividad Contemporanea have clear signs in the peruvian magazine cross three of the proposed periods. During the forties when Sert and Wiener were partners in Town Plannning Associates and had direct contact with the director of the magazine as well as with key colaborators, and during the following decade. In light of the evidence examined, the shape of José Luis Sert emerges as the most influential architect to the peruvian magazine along its entire route.