Gravitational energy of Kerr and Kerr anti-de Sitter space-times in the teleparallel geometry

In the context of the hamiltonian formulation of the teleparallel equivalent of general relativity we compute the gravitational energy of Kerr and Kerr Anti-de Sitter (Kerr-AdS) space-times. The present calculation is carried out by means of an expression for the energy of the gravitational field that naturally arises from the integral form of the constraint equations of the formalism. In each case, the energy is exactly computed for finite and arbitrary spacelike two-spheres, without any restriction on the metric parameters. In particular, we evaluate the energy at the outer event horizon of the black holes. © SISSA/ISAS 2003.

The surface geometry of exotic nuclei

We analyze the surface geometry of the spherical even-even Ca, Ni, Sn and Pb nuclei using two approaches: The relativistic Dirac-Hartree-Bogoliubov one with several parameter sets and the non-relativistic Hartree-Fock-Bogoliubov one with the Gogny force. The proton and neutron density distributions are fitted to two-parameter Fermi density distributions to obtain the half-density radii and diffuseness parameters. Those parameters allow us to determine the nature of the neutron skins predicted by the models. The calculations are compared with existing experimental data. © 2007 American Institute of Physics.

Influence of the tool edge geometry on specific cutting energy at high-speed cutting

This paper presents specific cutting energy measurements as a function of the cutting speed and tool cutting edge geometry. The experimental work was carried out on a vertical CNC machining center with 7,500 rpm spindle rotation and 7.5 kW power. Hardened steels ASTM H13 (50 HRC) were machined at conventional cutting speed and high-speed cutting (HSC). TiN coated carbides with seven different geometries of chip breaker were applied on dry tests. A special milling tool holder with only one cutting edge was developed and the machining forces needed to calculate the specific cutting energy were recorded using a piezoelectric 4-component dynamometer. Workpiece roughness and chip formation process were also evaluated. The results showed that the specific cutting energy decreased 15.5% when cutting speed was increased up to 700%. An increase of 1 °in tool chip breaker chamfer angle lead to a reduction in the specific cutting energy about 13.7% and 28.6% when machining at HSC and conventional cutting speed respectively. Furthermore the workpiece roughness values evaluated in all test conditions were very low, closer to those of typical grinding operations (∼0.20 μm). Probable adiabatic shear occurred on chip segmentation at HSC Copyright © 2007 by ABCM.

Conceptual spaces and consciousness: Integrating cognitive and affective processes

In the book Conceptual Spaces: the Geometry of Thought [2000] Peter Gärdenfors proposes a new framework for cognitive science. Complementary to symbolic and subsymbolic [connectionist] descriptions, conceptual spaces are semantic structures constructed from empirical data representing the universe of mental states. We argue that Gärdenfors' modeling can be used in consciousness research to describe the phenomenal conscious world, its elements and their intrinsic relations. The conceptual space approach affords the construction of a universal state space of human consciousness, where all possible kinds of human conscious states could be mapped. Starting from this approach, we discuss the inclusion of feelings and emotions in conceptual spaces, and their relation to perceptual and cognitive states. Current debate on integration of affect/emotion and perception/cognition allows three possible descriptive alternatives: emotion resulting from basic cognition; cognition resulting from basic emotion, and both as relatively independent functions integrated by brain mechanisms. Finding a solution for this issue is an important step in any attempt of successful modeling of natural or artificial consciousness. After making a brief review of proposals in this area, we summarize the essentials of a new model of consciousness based on neuro-astroglial interactions. © 2011 World Scientific Publishing Company.

Brachioradial pruritus - Descriptive analysis of Brazilian case series

Background The epidemiology and clinical features of brachioradial pruritus are variably described in the literature. We sought to analyze these features in a large group of Brazilian patients. Patients and Methods In a descriptive, observational study, we identified all patients with a final diagnosis of brachioradial pruritus seen over a one-year period and re-trospectively reviewed their records. The diagnosis was made after clinical-laboratory investigation had ruled out other causes of chronic pruritus. Demographic and clinical variables were collected along with pruritus characteristics, and analyzed using des-criptive statistics. Results Forty-three patients were identified; their mean age was 55.9 years, with predominance of women (81.4%) and Caucasians (86%). In 52%, the pruritus worsened with heat and sun exposure; 58.1% had intermittent complaints; the ice-pack sign was present only in 20.9%. The arms involving dermatomes C5-C6-C7-C8 (62.8%) were the most affected sites, while psychoactive drugs were the most frequently prescribed therapy. Conclusions Although uncommon, brachioradial pruritus should not be neglected in dermatological diagnosis. This case series analysis indicated that Brazilian patients from a tropical climate show characteristics similar to those described in other series from more temperate regions. © Blackwell Verlag GmbH, Berlin.

Further investigation of the initial fission-track length and geometry factor in apatite fission-track thermochronology

The external detector method (EDM) is a widely used technique in fission track thermochronology (FTT) in which two different minerals are concomitantly employed: spontaneous tracks are observed in apatite and induced ones in the muscovite external detector. They show intrinsic differences in detection and etching properties that should be taken into account. In this work, new geometry factor values, g, in apatite, were obtained by directly measuring the ρed/ρis ratios and independently determined [GQR]ed/is values through the measurement of projected lengths. Five mounts, two of which were large area prismatic sections and three samples composed of random-orientation pieces have been used to determine the g-values. A side effect of applying EDM is that the value of the initial confined induced fission track, L0, is not measured in routine analyses. The L 0-value is an important parameter to quantify with good confidence the degree of annealing of the spontaneous fission tracks in unknown-age samples, and is essential for accurate thermal history modeling. The impact of using arbitrary L0-values on the inference of sample thermal history is investigated and discussed. The measurement of the L0-value for each sample to be dated using an extra irradiated apatite mount is proposed. This extra mount can be also used for determining the g value as an extension of the ρed/ρis ratio method. Eight apatite samples from crystalline basement, with grains at random orientation, were used to determine the g-values. The results found are statistically in agreement with the values found for apatite samples (from Durango, Mexico) measured in prismatic section and also measured at random orientation. There was no observable variation in efficiency regarding crystal orientation, showing that it is relatively safe using non-prismatic grains, especially in samples with paucity of grains, as it is the case of most basin samples. Implications for the ζ-calibration and for the calibration of the direct (spectrometer-based) fission-track dating are also discussed.

Olhares que pensam e sentem: arte e mediação cultural na aula de geometria

Pós-graduação em Artes - IA

Um estudo sobre os conhecimentos geométricos adquiridos por alunos do ensino médio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A geometria em cursos de pedagogia da região de Presidente Prudente-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Descriptive study of HTLV infection in a population of pregnant women from the state of Pará, Northern Brazil

INTRODUÇÃO: No Brasil, estudos mostram que a soroprevalência do HTLV entre gestantes varia de 0 a 1,8%. Contudo, esta soroprevalência era desconhecida no Estado do Pará, Brasil. O presente estudo descreve, pela primeira vez, a soroprevalência do HTLV entre gestantes do Estado do Pará, Norte do Brasil. MÉTODOS: 13,382 gestantes foram submetidas à triagem para HTLV durante o pré-natal, e aquelas com sorologia alterada para anti-HTLV foram submetidas ao teste de Western Blot (WB), para confirmar e discriminar portadoras do HTLV-1 e do HTLV-2. RESULTADOS: A soroprevalência do HTLV na população de gestantes foi de 0,3%, sendo o HTLV-1 identificado em 95,3% das pacientes. O perfil demográfico das portadoras do HTLV foi de: mulheres com idade entre 20-40 anos (78,4%); residentes na região metropolitana de Belém (67,6%) e com nível educacional igual ao ensino médio (56,8%). Outras variáveis relacionadas à infecção foram: início das relações sexuais compreendido entre 12-18 anos (64,9%), e ter sido aleitada mais de 6 meses (51,4%). A maior parte das mulheres estudadas teve ao menos duas gestações anteriores (35,1%); e nenhum aborto (70,3%). Co-infecções (sífilis e HIV) foram descritas em 10,8% (4/37) das gestantes. A soroprevalência da infecção pelo HTLV em gestantes atendidas em Unidades Básicas de Saúde do Estado do Pará, Norte do Brasil foi de 0,3% semelhante à descrita em outros estudos brasileiros. As variáveis relacionadas com a infecção são indicadores importantes na identificação de gestantes com maior tendência a soropositividade pelo HTLV, sendo uma estratégia de controle e prevenção, evitando a transmissão vertical.

Influence of distance, geometry and number of control stations on quality of local geodetic networks for the purpose of georeferencing of rural properties

The implementation of local geodetic networks for georeferencing of rural properties has become a requirement after publication of the Georeferencing Technical Standard by INCRA. According to this standard, the maximum distance of baselines to GNSS L1 receivers is of 20 km. Besides the length of the baseline, the geometry and the number of geodetic control stations are other factors to be considered in the implementation of geodetic networks. Thus, this research aimed to examine the influence of baseline lengths higher than the regulated limit of 20 km, the geometry and the number of control stations on quality of local geodetic networks for georeferencing, and also to demonstrate the importance of using specific tests to evaluate the solution of ambiguities and on the quality of the adjustment. The results indicated that the increasing number of control stations has improved the quality of the network, the geometry has not influenced on the quality and the baseline length has influenced on the quality; however, lengths higher than 20 km has not interrupted the implementation, with GPS L1 receiver, of the local geodetic network for the purpose of georeferencing. Also, the use of different statistical tests, both for the evaluation of the resolution of ambiguities and for the adjustment, have enabled greater clearness in analyzing the results, which allow that unsuitable observations may be eliminated.

Geosynthetic-Reinforced Soil Structure Built to Restore Original Geometry of a 12 m High Slope After Failure Using Local Soil

This paper presents a study case in which a geosynthetic-reinforced soil (GRS) structure was used to rebuild a 12 m high slope after its failure. The failed slope is located between the parking lot of a private company and a public school. Due to surrounding structures restrictions, this project required a solution with rapidity in execution. In addition, as a requirement established by its owner, this structure should recover the original geometry of the slope. Besides the importance regarding surrounding constructions, an interesting aspect of this study case relies on the versatility of geosynthetic materials. A woven geotextile was used as reinforcement. Five other geosynthetic materials were used in this study case. Facing comprised a geocell filled with local soil cover and grass mats, resulting in a green facing. A geonet was used to hold the grass mats in place before grass roots development. Regarding the drainage system, geocomposite drains and geopipes were installed to drain subsurface water. A nonwoven geotextile was used as filter in drainage trenches, which were placed near the structure toe. Additionally to the GRS structure, the lower portion of the slope was reinforced with soil nailing technique. The face of the nailed soil portion was covered with sandbags and shotcrete. It emphasizes the flexibility of GRS structures regarding their application with other technical options in Geotechnical Engineering. The economic aspect of this study case also deserves attention. It did not require soil transportation and other design and construction steps, e.g. concrete structures design and construction.

Undergraduate research in medical education: a descriptive study of students' views

Background: Medical students engage in curricular and extracurricular activities, including undergraduate research (UR). The advantages, difficulties and motivations for medical students pursuing research activities during their studies have rarely been addressed. In Brazil, some medical schools have included undergraduate research into their curriculum. The present study aimed to understand the reality of scientific practice among medical students at a well-established Brazilian medical school, analyzing this context from the students' viewpoint.Methods: A cross-sectional survey based on a questionnaire applied to students from years one to six enrolled in an established Brazilian medical school that currently has no curricular UR program.Results: The questionnaire was answered by 415 students, 47.2% of whom were involved in research activities, with greater participation in UR in the second half of the course. Independent of student involvement in research activities, time constraints were cited as the main obstacle to participation. Among students not involved in UR, 91.1% said they favored its inclusion in the curriculum, since this would facilitate the development of such activity. This approach could signify an approximation between the axes of teaching and research. Among students who had completed at least one UR project, 87.7% said they would recommend the activity to students entering the course.Conclusion: Even without an undergraduate research program, students of this medical school report strong involvement in research activities, but discussion of the difficulties inherent in its practice is important to future developments.

Impact of Quantity of Resin, C-factor, and Geometry on Resin Composite Polymerization Shrinkage Stress in Class V Restorations

Objective: This study evaluated the effect of quantity of resin composite, C-factor, and geometry in Class V restorations on shrinkage stress after bulk fill insertion of resin using two-dimensional finite element analysis.Methods: An image of a buccolingual longitudinal plane in the middle of an upper first premolar and supporting tissues was used for modeling 10 groups: cylindrical cavity, erosion, and abfraction lesions with the same C-factor (1.57), a second cylindrical cavity and abfraction lesion with the same quantity of resin (QR) as the erosion lesion, and then all repeated with a bevel on the occlusal cavosurface angle. The 10 groups were imported into Ansys 13.0 for two-dimensional finite element analysis. The mesh was built with 30,000 triangle and square elements of 0.1 mm in length for all the models. All materials were considered isotropic, homogeneous, elastic, and linear, and the resin composite shrinkage was simulated by thermal analogy. The maximum principal (MPS) and von Mises stresses (VMS) were analyzed for comparing the behavior of the groups.Results: Different values of angles for the cavosurface margin in enamel and dentin were obtained for all groups and the higher the angle, the lower the stress concentration. When the groups with the same C-factor and QR were compared, the erosion shape cavity showed the highest MPS and VMS values, and abfraction shape, the lowest. A cavosurface bevel decreased the stress values on the occlusal margin. The geometry factor overcame the effects of C-factor and QR in some situations.Conclusion: Within the limitations of the current methodology, it is possible to conclude that the combination of all variables studied influences the stress, but the geometry is the most important factor to be considered by the operator.

Cartan geometry of spacetimes with a nonconstant cosmological function Lambda

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)