An investigation into the temperature distribution resulting from cutting of compact bone using a reciprocating bone saw

Surgical procedures such as osteotomy and hip replacement involve the cutting of bone with the aid of various manual and powered cutting instruments including manual and powered bone saws. The basic mechanics of bone sawing processes are consistent with most other material sawing processes such as for wood or metal. Frictional rubbing between the blade of the saw and the bone results in the generation of localised heating of the cut bone. Research studies have been carried out which consider the design of the bone saw which deals with specifics of the saw teeth geometry and research which examines the effect of drilling operations on heating of the bone has shown that elevated temperatures will occur from frictional overheating. This overheating in localised areas is known to have an impact on the rate of healing of the bone post operation and the sharpness life of the blade. The purpose of this study was to measure the temperature at three zones at fixed intervals of 3mm, 6mm, and 9mm away from the cutting zone. It should be noted that it was the first time that this measurement technique was used to measure the temperature gradient through the bone specimen thereby establishing the extent to which clinicians are experiencing thermal injury during sawing of bone while using a reciprocating saw. The effect of various cutting feed rate on temperature elevation was also investigated in this research. The results showed that there will be a region of bone at least 9mm either side of the cutting blade experiencing thermal injury as temperatures in this region exceeded the threshold temperature of 44°C for necrosis (cell death).

Acoustic emission analysis of the effect of a 2D wedge shaped blade on the compact bone cutting process

Surgeons may use a number of cutting instruments such as osteotomes and chisels to cut bone during an operative procedure. The initial loading of cortical bone during the cutting process results in the formation of microcracks in the vicinity of the cutting zone with main crack propagation to failure occuring with continued loading. When a material cracks, energy is emitted in the form of Acoustic Emission (AE) signals that spread in all directions, therefore, AE transducers can be used to monitor the occurrence and development of microcracking and crack propagation in cortical bone. In this research, number of AE signals (hits) and related parameters including amplitude, duration and absolute energy (abs-energy) were recorded during the indentation cutting process by a wedge blade on cortical bone specimens. The cutting force was also measured to correlate between load-displacement curves and the output from the AE sensor. The results from experiments show AE signals increase substantially during the loading just prior to fracture between 90% and 100% of maximum fracture load. Furthermore, an amplitude threshold value of 64dB (with approximate abs-energy of 1500 aJ) was established to saparate AE signals associated with microcracking (41 – 64dB) from fracture related signals (65 – 98dB). The results also demonstrated that the complete fracture event which had the highest duration value can be distinguished from other growing macrocracks which did not lead to catastrophic fracture. It was observed that the main crack initiation may be detected by capturing a high amplitude signal at a mean load value of 87% of maximum load and unsteady crack propagation may occur just prior to final fracture event at a mean load value of 96% of maximum load. The author concludes that the AE method is useful in understanding the crack initiation and fracture during the indentation cutting process.

Some results of study of variations of light ions concentration and their connections with the ionizing radiation and sub-micron aerosol content in air under the conditions of Tbilisi city

Results of analysis of variations of sum light ions concentration and their connections with radon, galactic cosmic rays intensity and content of sub-micron aerosols by diameter ≥ 0.1 micron in surface boundary layer of Tbilisi city are given.

Variations and application conditions of the data type "Image" : the foundation of computational visualistics

Visualistics, computer science, picture syntax, picture semantics, picture pragmatics, interactive pictures

Micro scale modeling grain boundary damage under creep conditions

Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2014

Impact of cultivation conditions on N-glycosylation of influenza A virus hemagglutinin, on quasispecies composition, and on immunogenicity of virus preparations

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2014

Accumulation of micronutrients by sweet sorghum under field conditions

Samples of two cultivars of sweet sorghum (Brandes and Rio) grown on a Dark Red Latosol (Latossolo Roxo, Barra Bonita, SP.) were collected at intervals of 20 days during their life cycle and the contents of micronutrients were determined by routine procedures. Usually the physiological stages in which the rate of absorption was higher were not the same for both varieties.

Spatio-temporal pattern formation in microemulsions under different physical and chemical conditions

Otto-von-Guericke-Universität Magdeburg, Fakultät für Naturwissenschaften, Dissertation, 2016

Growth, molt and survival of Palaemonetes argentinus (Decapoda, Caridea) under different light-dark conditions

Growth, survival and molting rate in Palaemonetes argentinus Nobili, 1901 were compared under different light-dark conditions. During 80 days, 150 immatures of both sexes (initial mean weight 0.09±0.002g), from Los Padres lagoon, Mar del Plata, Argentina, were maintained in aquaria at 19±0.4°C under three light conditions: 0:24, 10:14 and 13:11 (L-D). They were fed daily on an artificial diet (45% proteins, 17.2% lipids, 7% water, 7% ash). Good weight increment was obtained with the three treatments, finding a positive linear correlation between mean weight and time (0:24, r=0.97; 10:14, r=0.99; 13:11, r=0.98). There were no significant differences in the percentage increment in mean weight among the treatments (0:24, 19.3%; 10:14, 29.3% and 13:11, 26.5%) (p<0.05). Molting rate was significantly higher at a long-day photoperiod (MR=1.7) than at a short-day (MR=0.6) or continuous dark condition (MR=0.3) (p<0.05). The lowest survival was found in animals maintained under 13:11 L-D conditions (77%), being statistically different of the other two treatments (92% and 89% at 10:14 and 0:24, respectively) (p<0.05). These results suggest that the best growth and survival in P. argentinus result with a 10:14 L-D cycle, and that the growth is less affected by photoperiod than molting rate and survival.

Oviposition behavior of Zabrotes subfasciatus females (Coleoptera, Bruchidae) under conditions of host deprivation

Oviposition of Zabrotes subfasciatus (Boheman, 1833) on Phaseolus vulgaris (Linnaeus, 1753) was studied immediately after emergence of the adults throughout the females life and in situations of host deprivation lasting for 1 to 10 days. The number of eggs laid daily, longevity, duration of oviposition and distribution of eggs per grain were studied. The number of eggs laid per day varied significantly, with the oviposition peak in the presence of the host (control group) occurring between day 2 and day 5 of oviposition. In the absence of the host, a shift in the oviposition peak to the first day after deprivation was observed, except for the group deprived for one day which showed a peak between days 1 and 4 after introduction of the host. The distribution of the eggs per grain in the control group and in the groups deprived of the host for 2, 5, 8 and 10 days, a larger egg aggregation was observed for all deprived groups compared to the control group.

Tolerance to salinities shocks of the invasive mussel Limnoperma fortunei under experimental conditions

The golden mussel, Limnoperna fortunei (Dunker, 1857), has been found in the estuarine regions of South America, including the Patos Lagoon (Brazil), a huge choked lagoon with an estuarine region that is highly unstable chemically. Limnoperna fortunei space-temporal variability in the lagoon's estuarine region demonstrated the need to evaluate this species' ability to survive under salinity shocks. A set of experiments was conducted under controlled laboratory conditions. Specimens were tested under salinities of 2, 4, 6, 8 and 12 ppt, and were exposed for periods of 24, 48, 72, 96 and 240 hours. The mussel can survive (90%) up to a salinity shock of 2 ppt for periods of at least 10 days. Considering the influence of climatic and stochastic events and the chemical instability of the Patos Lagoon estuarine region, it's unlikely that populations could survive for longer periods (more than a year) in this area.

Shape and size variations of Aegla uruguayana (Anomura, Aeglidae) under laboratory conditions: A geometric morphometric approach to the growth

Crustacean growth studies typically use modal analysis rather than focusing on the growth of individuals. In the present work, we use geometric morphometrics to determine how organism shape and size varies during the life of the freshwater crab, Aegla uruguayana Schmitt, 1942. A total of 66 individuals from diverse life cycle stages were examined daily and each exuvia was recorded. Digital images of the dorsal region of the cephalothorax were obtained for each exuvia and were subsequently used to record landmark configurations. Moult increment and intermoult period were estimated for each crab. Differences in shape between crabs of different sizes (allometry) and sexes (sexual dimorphism; SD) were observed. Allometry was registered among specimens; however, SD was not statistically significant between crabs of a given size. The intermoult period increased as size increased, but the moult frequency was similar between the sexes. Regarding ontogeny, juveniles had short and blunt rostrum, robust forehead region, and narrow cephalothorax. Unlike juveniles crabs, adults presented a well-defined anterior and posterior cephalothorax region. The rostrum was long and stylised and the forehead narrow. Geometric morphometric methods were highly effective for the analysis of aeglid-individual- growth and avoided excessive handling of individuals through exuvia analysis.