Introdução ao estudo de custos

Unidade 1

Classificação dos custos agroindustriais

A ferramenta de custos se mostra relevante do ponto de vista gerencial, auxiliando no controle de gastos e na tomada de decisões nas empresas. Para melhor entender este conceito, o material apresenta a taxonomia dos sistemas de custos, além de suas classificações quanto à natureza, à identificação com o produto e à variação quantitativa. Como o estoque representa grande parte dos custos de produção, são apresentadas três formas contábeis para avaliação dos mesmos: PEPS (primeiro a entrar, primeiro a sair), UEPS (último a entrar, primeiro a sair) e Custo Médio.

Estrutura dos custos agroindustriais

Inicialmente coloca-se o conceito de produção agroindustrial, que abrange desde as atividades agrícolas anteriores ao processamento industrial até a transformação primária dos produtos obtidos na exploração agrária. As especificidades do setor são apresentadas e os principais custos agroindustriais relativos ao mesmo são citados. As peculiaridades dos custos agroindustriais com mão-de-obra, remuneração do proprietário, capital fixo, materiais, pastagens administração, seguros financiamentos, conservação e reparação e os riscos são adaptados para este setor industrial, que se diferencia dos outros por suas próprias características anteriormente descritas. Finalmente sugerem-se ações para que os custos agroindustriais sejam melhor gerenciados, ajudando na expansão da competitividade do setor nos mercados interno e externo.

Gestão de projectos: modelo para gestão e controlo de custos de obras de construção civil

Hoje em dia onde o mercado da construção civil é cada vez mais competitivo e as empresas de construção civil tendem em apresentar orçamentos com os custos cada vez mais inferiores, diminuindo as margens de lucro por forma a garantir trabalho para alimentar a sua massa. Deste modo, é fulcral apostar em ferramentas ou em métodos que apoiem a equipa de direcção de obra de forma a garantir as margens previstas antes do início dos trabalhos. É neste contexto que este trabalho foi desenvolvido, garantindo uma aplicação informática numa folha de cálculo MS Excel e com recurso ao programa de planeamento MS Project, que aplica um método de controlo de custos de uma forma simples e funcional sem grandes encargos de aquisição de softwares ou de formação específica.

A formação e o desenvolvimento de arranjos cooperativos sob a ótica da imersão social e da economia dos custos de transação: um estrudo de caso na Coopercam e na Unipesca

The current study analyzes the birth and development of two strategic alliances established between shrimp producers in Rio Grande do Norte: the Unipesca and the Coopercam. To achieve this aim, two approaches which, at first sight, could be considered contradictory were used: the Transactional Costs Economy and Embeddedness. The first approach is fundamentally based in the studies of Williamson (1985; 1991; 1996; 1999; 2000; 2002). Embededness, on the other hand, went through the review of a series of authors, such as Burt (1992), Granovetter (1973; 1985), Uzzi (1997), Gulati (1994; 1995; 1997; 1998; 1999; 2000), Nielsen (2005), Ring (2002), Ring and Van de Ven (1994), Zafirovski (2002), among others. To analyze the birth and development of the cooperatives in this study, Gulati s work (1998) was used. This study shows the steps to be studied for a better comprehension of an alliance: the decision of starting an alliance and the choice of the partners, the decision about the governance structure, the evolution of the alliance and the development of the companies which established this partnership. To carry this study out, a study case accordingly to Yin s proposal (2001) was adopted. Semi-structured interviews with pre-defined plots were conducted in two phases: in the beginning of 2006 and in the beginning of 2007. The subjects from the research were, in 2006, representative members of the main associations and corporations, besides the shrimp producers from the state, when the context of the activity was set. In the second phase, in 2007, representative members from the two cooperatives that were listed above were interviewed the president from Coopercam and the marketing manager from Unipesca. Besides these two members, directors from two important organizations in each of these cooperatives were also interviewed, giving out the necessary information for the research. Secondary data was also collected from the Brazilian Association of Crab producers website, as well as from news from important newspapers in RN, such as Tribuna do Norte. The primary data was analyzed in terms of quality, accordingly to the documental analysis technique. Thus, through the data that was collected, it can be concluded that the reasons that motivated the companies to cooperate can be explained in terms of the transactional costs economy. However, the choice of partners is more connected to aspects approached by the social embededness. When aspects related to development and evolution were analyzed, it could be seen that both aspects from TCE and Embededness were vital to explain the development of the cooperatives mentioned

Inserção de fornecedores locais como fonte de desempenhos em custos de transação e legitimidade: estudo de caso na cadeia produtiva do petróleo e gás do Rio Grande do Norte

The inclusion of local suppliers in production chains has considerable impact on its performance, but most notably in its main actors. The results of this process may be of different kinds and can be analyzed from economic or institutional approaches. This study aimed to verify the existence of different performances of Petrobras due to the inclusion of local suppliers in the oil and gas production chain in the state of Rio Grande do Norte, from the viewpoints of transaction costs and the Institutional Theory. In order to this, were made the characterization of the PROMINP, the description of its actions and results, the mapping of its institutional context of reference, and identification of results obtained by Petrobras in terms of transaction costs and legitimacy. The theoretical framework is based on authors dealing with industrial concentration, as like Marshall, Krugman, Porter and Schmitz, from the sociological perspective of neoinstitucional theory, as like DiMaggio and Powell and Scott and Meyer, and transaction costs, as like Williamson. This is a qualitative research, with data collection done by consulting secondary fonts and semi-structured interviews with nineteen actors of three groups, namely: actors involved in actions of the program, representatives of enterprises and representative of Petrobras. To analyze the content was used the Suchman s model (1995) for categories associated with strategies of legitimation and fourteen variables associated with the three variables assets specificity, bounded rationality and opportunism (Williamson, 1995, 1989) in the case of transaction costs. The results indicate that PROMINP has achieved its objectives by encouraging the increased participation of local companies in the oil and gas production chain, reflecting in the economic development of the state. The Redepetro/RN, fostered and built upon the interaction of the participants, is presented as a solution of continuity to the participation of enterprises in the chain, after the closure of the actions of the program. PROMINP demands responses to coercive, legislative and regulatory pressures of the organizational field, whose institutional context of reference is wide. From the point of view of legitimacy, through strategies to gain cognitive legitimacy and maintaining pragmatic legitimacy, Petrobras can manipulate the environment, ensuring the compliance of the constituents to their technical and institutional demands. Enterprises, in turn, respond to the demands through compliance with technical demands, mainly through the certification of processes, and cultural changes. There aren t clear gains related to the transaction costs, however, gains in legitimacy can be seen as a cumulative capital that can serve as a competitive differential that generates economic gains. In terms of theoretical findings, it was found that, due to its explanatory power for actions that are difficult to explain only in economic terms, Institutional Theory may be used as theoretical support concurrent with other theories. TCE model has limitations in explaining the program actions. In the case, it s emphasized that Petrobras doesn t seek only economic efficiency, but has in its mission the commitment to social development.

Influência da vermiculita expandida na resistência à compressão e reologia de pastas cimentantes de poços de petróleo

Several problems related to the loss of hydraulic seal in oilwells, causing gas migration and/or contamination of the production zone by water, have been reported. The loss of the hydraulic seal is a consequence of cracks which can be occasioned either by the invasion of gas during the wait on cement or by the expansion of the casing causing the fracture of the cement sheath. In case of the pressure of the formation is higher than the pressure in the annulus, gas can migrate into the slurry and form microannulus, which are channels where gas migrates after the cement is set. Cracks can be also occasioned by the fracture of the cement sheath when it does not withstand the thermal and dynamic loads. In reservoirs where the oil is heavy, steam water injection operation is required in order to get the oil flowing. This operation increases the temperature of the casing, and then it expands and causes the fracture of the cement sheath in the annulus. When the failures on the cement are detected, remedial cementing is required, which raise costs caused by the interventions. Once the use of cement in the construction civil sector is older than its use in the petroleum sector, it is common to bring technologies and solutions from the civil construction and apply them on the petroleum area. In this context, vermiculite, a mineral-clay widely encountered in Brazil, has been used, on its exfoliated form, in the civil construction, especially on the manufacture of lights and fireproof concretes with excellent thermal and acoustical properties. It has already been reported in scientific journals, studies of the addition of exfoliated vermiculite in Portland cements revealing good properties related to oilwell cementing operations. Thus, this study aimed to study the rheological behavior, thickening time, stability and compressive strength of the slurries made of Portland cement and exfoliated vermiculite in 5 different compositions, at room temperature and heated. The results showed that the compressive strength decreased with the addition of exfoliated vermiculite, however the values are still allowed for oiwell cementing operations. The thickening time of the slurry with no exfoliated vermiculite was 120 min and the thickening time of the slurry with 12 % of exfoliated vermiculite was 98 min. The stability and the rheological behavior of the slurries revealed that the exfoliated vermiculite absorbed water and therefore increased the viscosity of the slurries, even though increasing the factor cement-water. The stability experiment carried out at 133 ºF showed that, there was neither sedimentation nor reduction of the volume of the cement for the slurry with 12 % of exfoliated vermiculite. Thus, the addition of exfoliated vermiculite accelerates the set time of the cement and gives it a small shrinkage during the wait on cement, which are important to prevent gas migration

Ambiente para avaliação de controladores fuzzy aplicados ao método de elevação artificial por bombeio centrífugo submerso

From their early days, Electrical Submergible Pumping (ESP) units have excelled in lifting much greater liquid rates than most of the other types of artificial lift and developed by good performance in wells with high BSW, in onshore and offshore environments. For all artificial lift system, the lifetime and frequency of interventions are of paramount importance, given the high costs of rigs and equipment, plus the losses coming from a halt in production. In search of a better life of the system comes the need to work with the same efficiency and security within the limits of their equipment, this implies the need for periodic adjustments, monitoring and control. How is increasing the prospect of minimizing direct human actions, these adjustments should be made increasingly via automation. The automated system not only provides a longer life, but also greater control over the production of the well. The controller is the brain of most automation systems, it is inserted the logic and strategies in the work process in order to get you to work efficiently. So great is the importance of controlling for any automation system is expected that, with better understanding of ESP system and the development of research, many controllers will be proposed for this method of artificial lift. Once a controller is proposed, it must be tested and validated before they take it as efficient and functional. The use of a producing well or a test well could favor the completion of testing, but with the serious risk that flaws in the design of the controller were to cause damage to oil well equipment, many of them expensive. Given this reality, the main objective of the present work is to present an environment for evaluation of fuzzy controllers for wells equipped with ESP system, using a computer simulator representing a virtual oil well, a software design fuzzy controllers and a PLC. The use of the proposed environment will enable a reduction in time required for testing and adjustments to the controller and evaluated a rapid diagnosis of their efficiency and effectiveness. The control algorithms are implemented in both high-level language, through the controller design software, such as specific language for programming PLCs, Ladder Diagram language.

Custos e rentabilidade da produção de juvenis de tilápia-do-nilo em tanques-rede utilizando-se diferentes densidades de estocagem

Neste trabalho foi realizada a análise econômica da produção de juvenis de tilápia-do-nilo em tanques-rede utilizando-se diferentes densidades de estocagem. O experimento foi desenvolvido em área aquícola, em delineamento de blocos casualizados, com quatro densidades de estocagem (100, 200, 300 e 400 peixes m-3), avaliadas com seis repetições, em dois períodos de criação: de março a abril de 2005 (52 dias - peso inicial de 43,08 ± 2,98 g e peso final de 262,14 ± 47,86 g) e de março a abril de 2006 (58 dias - peso inicial de 43,16 ± 5,34 g e peso final 314,24 ± 73,30 g). Foram avaliadas as seguintes variáveis econômicas: custo da ração mais custo do juvenil dividido pela biomassa, em R$ kg-1; porcentagem do custo da ração por quilo de peixe produzido sobre o preço de venda; porcentagem do custo do juvenil por quilo de peixe produzido sobre o preço de venda e; porcentagem dos custos da ração mais do juvenil por quilo de peixe produzido sobre o preço de venda. da menor densidade de estocagem (100) para a maior (400), ocorreu diminuição no ganho de peso diário e elevação do índice de conversão alimentar aparente, mas essa redução não comprometeu a taxa de sobrevivência. Entretanto, o ganho de biomassa aumentou com o adensamento de peixes. As maiores receitas líquidas foram obtidas nas densidades de estocagem de 100 e 200 peixes m-3. Os preços não remuneraram os custos operacionais (efetivo e total) em maiores densidades (300 e 400 peixes m-3). Os melhores resultados para a produção de juvenis de tilápia-do-nilo foram obtidos com densidades de até 200 peixes m-3.

Mapeamento das formas do relevo para estimativa de custos de fertilização em cana-de-açúcar

A modelagem matemática associada ao conhecimento da variabilidade dos atributos do solo e mapeamento das formas do relevo pode auxiliar no manejo da fertilidade do solo em usinas sucroalcooleiras. O presente trabalho teve como objetivo avaliar o uso da geoestatística e da modelagem matemática na estimativa de custos de fertilização, em diferentes formas do relevo. em uma área de 200 ha, foram identificadas duas formas de relevo, uma côncava e outra convexa, sendo os solos coletados nos pontos de cruzamento de uma malha, com intervalos regulares de 50 m, perfazendo um total de 623 pontos. As amostras foram submetidas a análises químicas, e, posteriormente, os dados foram avaliados por meio da estatística descritiva, geoestatística e modelagem matemática. Os resultados mostraram que, quando as formas do relevo são incorporadas às análises geoestatística e de modelagem matemática, ocorre aumento na eficiência de aplicação do calcário, fósforo e potássio no solo.

Desenvolvimento de um sistema de planejamento, gestão de serviços e controle de custos em obras de construção civil

The increasing competitiveness of the construction industry, set in an economic environment in which the offer is now greater than the demand , causes the prices of many products and services, are strongly influenced by the processes of production and the final consumer. Thus, to become more competitive in the market and construction companies are seeking new alternatives to reduce and control costs, production processes and tools that allow for close monitoring of the construction schedule, with the consequent compliance deadline with the client. Based on this scenario, the creation of control tools, service management and planning work emerges as an investment opportunity and an area that can promote great benefits to construction companies. The goal of this work is to present a system of planning, service management and costs control that through worksheets provide information relating to the production phase of the work, allowing the visualization of possible irregularities in the planning and cost of the enterprise, enabling the company to take steps to achieve the goals of the enterprise in question, and correct them when necessary. The developed system has been used in a piece of real estate in Rio Grande do Norte, and the results showed that its use together allowed the construction company to accompany their results and take corrective and preventive actions during the production process, efficiently and effective

Análise dos custos assistenciais de uma operadora de plano de saúde no Brasil

The relevance of rising healthcare costs is a main topic in complementary health companies in Brazil. In 2011, these expenses consumed more than 80% of the monthly health insurance in Brazil. Considering the administrative costs, it is observed that the companies operating in this market work, on average, at the threshold between profit and loss. This paper presents results after an investigation of the welfare costs of a health plan company in Brazil. It was based on the KDD process and explorative Data Mining. A diversity of results is presented, such as data summarization, providing compact descriptions of the data, revealing common features and intrinsic observations. Among the key findings was observed that a small portion of the population is responsible for the most demanding of resources devoted to health care

Modelo bioeconômico para cálculo de custos e receitas em sistemas de produção de gado de corte visando à obtenção de valores econômicos de características produtivas e reprodutivas

Foi desenvolvido um modelo bioeconômico para o cálculo do desempenho, dos custos e das receitas para obtenção de valores econômicos de características de interesse econômico em sistemas de produção de gado de corte no Brasil. As informações de desempenho e de parâmetros biológicos e econômicos foram obtidas em uma propriedade de gado Nelore que realiza ciclo completo com venda de reprodutores. O modelo é determinístico e estático e foram usadas planilhas Excel para a realização dos cálculos. Com base nas informações originais, foram simulados dois sistemas de produção, um fazendo o ciclo completo com venda de reprodutores (CcoR) e o outro, de cria (Cc). Foram calculados os custos e as receitas para esses dois sistemas e, a partir disto, foram obtidos seus lucros anuais. Para o cálculo dos valores econômicos foram escolhidas as características peso à desmama (PD), peso adulto da vaca (PAV), taxa de prenhez (TP) e taxa de desmama (TD), que são de interesse nos dois sistemas de produção. Para avaliar o impacto das mudanças no desempenho das características sobre o lucro anual do sistema de produção, os valores iniciais das características foram aumentados em 1%. Esse aumento resultou em mudanças positivas no lucro, observando-se que a TD foi a característica que apresentou maior impacto nos dois sistemas. Para o CcoR, os valores econômicos para PD, PAV, TP e TD foram, respectivamente, R$ 0,40/kg, R$ 0,09/kg, R$ 3,20/1% e R$ 10,15/1%. Para Cc, estes valores foram, respectivamente, de R$ 1,31/kg, R$ 0,09/kg, R$ 2,41/1% e R$ 3,36/1%. O modelo foi capaz de reproduzir satisfatoriamente o sistema de produção de gado de corte estudado e pode ser adaptado para outras circunstâncias de produção.

Influência do relevo na produtividade e custos do harvester

Among the several variables that influence timber harvesting is the slope, which influences the productivity of forest machines. In this experiment the harvester was evaluated technically and economically while cutting and processing eucalyptus activity on different slope classes. The technical analysis included a study of time and movements by the method of continuous time; productivity was determined by the volume in cubic meters of wood processing. The economic analysis included the parameters of operational cost, production cost and energy consumption. The analysis of the data showed that productivity decreased according to the increase of the percent slope inclination, resulting in an effective work hour productivity increase from 18.72 to 39.71 m(3)sc, with a mean of operating cost of US$ 78.78 per work hour.