981 resultados para Crack (Droga)


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Mode of access: Internet.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Detection of a fatigue crack in a welded frame structure is studied in this paper using coupled response measurements. Similarity to real engineering structures is maintained in the fabrication of the test frame with hollow section chords and branch members. The fatigue crack was created by a special reciprocating mechanism that generates cyclic stress on a beam member of the structure. The methodology of coupled response measurements is first demonstrated on a single hollow section beam by analytical simulation and experimental validation. The issues of using this approach for fatigue crack detection in real structures are then examined. Finally, the experimental results of the frame under different scenarioes are presented. The existence of the crack is clearly observable from the FRF plots. It is suggested that this approach offers the potential to detect cracks in welded frame structures and is a useful tool for routine maintenance work and health assessment.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

While the general mechanisms of hot tearing are understood, i.e. the inability of liquid to feed imposed strain on the mushy material, work continues on improving the understanding of the mechanisms at play. A hot tear test rig that measures the temperature and load imposed on the mushy zone during solidification has been successfully used to study hot tearing. The mould has now been modified to incorporate a window above the hot spot region to allow observation of hot tear formation and growth. Combining information from visual observation with load and temperature data has led to a better understanding of the mechanism of hot tearing. Tests were carried out on an Al-0.5 wt-% Cu alloy. It was found that load development began at about 90% solid and a hot tear formed a short time later, at between 93% and 96% solid. Hot tearing started at a very low load.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The depths of cracks in desiccating plastic concrete are estimated by considering the effects of the suction (negative pore pressure) associated with desiccation and applying five failure models derived from fracture, theories combined with theories drawn from geotechnical engineering under the assumption that plastic concrete is a frictional particulate material. The estimated crack depths vary with the depth of desiccation, the suction profile, and a small number of material parameters that depend on the model adopted and are comparatively easy to estimate accurately. Four of the models predict excessively large crack depths. The fifth, however, predicts shallower crack depths that increase with the age of the concrete and are consistent with those of analogous desiccation cracks in coal mine tailings. It thus offers a relatively robust method of estimating the depth of desiccation cracks. Confirmation of this with data for plastic concrete is clearly desirable but not possible at present.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Many potential applications for sintered aluminium are limited by the poor fatigue properties of the material. In order to increase understanding of the fatigue mechanisms in sintered aluminium, fatigue tests were carried out on a sintered 2xxx series aluminium alloy, AMB-2712. The alloy has a fatigue endurance strength of approximately 145 MPa (R = 0.1). Three regions were identified on the fatigue fracture surfaces. Region I contains the initiation site and transgranular crack propagation. When the size of the cyclic plastic zone ahead of the crack becomes comparable to the grain size, microstructural damage at the crack tip results in a transition to intergranular propagation. Region 2 mainly contains intergranularly fractured material, whilst the final fracture area makes up Region 3, in the form of dimple coalescence and intergranular failure. Transgranular fractographic features observed on fatigued specimens include fissure-type striations, cross-hatched grains, furrowed grains and grains containing step-like features. (c) 2006 Elsevier B.V. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este estudo teve por objetivo identificar e descrever associações entre bem-estar subjetivo, construto formado por satisfação geral com a vida e afetos positivos e negativos,e autoeficáciapara abstinência de drogas em dependentes de cocaína/crack em processo de abstinência. Utilizou, para avaliar as variáveis, as Escalas de Afetos Positivos e Negativos, de Satisfação Geral com a Vida, de Autoeficácia para Abstinência de Drogas, de Avaliação para Mudança da Universidade de Rhode Island e um questionário de dados sócio-demográficos e socioculturais. Participaram 70 homens, dependentes de cocaína/crack, jovens e de baixa escolaridade.Eram pessoas de rendimentos de até três salários mínimos (63%), que foram internadas mais de uma vez (65%), autodeclaradas abstinentes no momento da coleta dos dados. Os participantes possuíam níveis médiosde autoeficácia para abstinência de drogas, níveis baixos de bem-estar subjetivo, e estavam satisfeitos com suas vidas. Cálculos de correlação de Pearson revelaram que não há associação entre bem-estar subjetivoe autoeficácia para abstinência de drogas, entre prontidão para mudança no consumo de drogas e bem-estar subjetivo, nem entre prontidão para mudança no consumo de drogas eautoeficácia para abstinência de drogas. Resultados de análise de variância revelaram que não houve diferençasnos níveis de bem-estar subjetivo entreos diferentes os agrupamentos de prontidão para mudanças nem entre as médias de autoeficácia para abstinência de drogas entre os diferentes agrupamentos de prontidão para mudanças no consumo de drogas. A discussão abordou os resultados diante do fato de a internação dos participantes ter sido involuntária ou voluntária, do tempo de internação, do seu estágio de prontidão para mudar seu comportamento de consumo de drogas e das características de seu grupo de abstinência diante da literatura da área. Finalmente, apontou, em conclusão, limitações e agenda de pesquisa futura.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Esta pesquisa estudou adolescentes internadas para tratamento de dependência de drogas no Centro de Recuperação Álcool e Drogas Desafio Jovem. Objetivou descrever as características psicossociais e a psicodinâmica dessas adolescentes, além de identificar comportamentos de riscos e de proteção à saúde das participantes. Para coleta de dados, foram utilizados o Questionário de Identificação Sócio-Demográfico e Consumo de Substâncias Psicoativas, o teste projetivo H.T.P. (House-Tree-Person) e o Inventário de Triagem do Uso de Drogas (DUSI) . Fizeram parte do estudo 14 adolescentes na faixa de 12 a 17 anos. A maioria das adolescentes (78,57%) são filhas de pais separados. A primeira substância usada, na faixa de idade de 9 a 14 anos, foi o cigarro (42,86%), a segunda foi a maconha (35,71%), a terceira, na faixa de 9 a 15 anos foi o álcool (21,43%) e a quarta substância, na faixa de 9 a 16 anos foi o crack (35,71%). A droga predileta das adolescentes é o crack (42,9%). A carência afetiva é vista como reflexo da própria história de vida, com o desamparo, com ausência de afeto, falta de confiança, isolamento, falta de contatos sociais seguros, descontentamento com o ambiente familiar que se apresenta restritivo, apresentando vulnerabilidade que se faz presente em relação às pressões vividas no ambiente familiar. O pai se constitui quase sempre ausente na elaboração das adolescentes. Situações, como negligência, violência e abandono paterno, bem como o envolvimento com drogas lícitas e ilícitas pelos pais e outros familiares, devem ser objeto de medidas de proteção de políticas públicas de promoção de saúde familiar e comunitária e de redução de danos relacionados ao uso de substâncias psicoativas.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study analysed news media content to examine the role played by celebrity drug use in young people's perceptions of drug use. We know that young people have access to discourses of drug use through music and other media which may emphasise short term gains (of pleasure or sexual success) over longer term health and social problems. This study goes beyond a simple modelling approach by using Media Framing Analysis (MFA) to take an in-depth look at the messages themselves and how they are 'framed'. New stories about Amy Winehouse's drug use were used and we conducted focus groups with young people asking them questions about drugs, celebrity and the media. Frames identified include: 'troubled genius', 'losing patience' and 'glamorization or gritty realism'. Initially, the press championed Winehouse's musical talent but soon began to tire of her recklessness; the participants tended to be unimpressed with Winehouse's drug use, characterising her as a promising artist who had 'gone off the rails'. Young people were far more critical of Winehouse than might be expected, demonstrating that concerns about the influence of celebrity drug use and its impact on future health risk behaviour among young people may have been over-simplified and exaggerated. This study illustrates the need to understand young people and their frames of reference within popular culture when designing drug awareness information relevant to them. Furthermore, it indicates that critical media skills analysis may contribute to health risk education programmes related to drug use.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fatigue crack initiation and propagation in aluminium butt welds has been investigated. It is shown that the initiation of cracks from both buried defects and. from the weld reinforcement may be quantified by predictive laws based on either linear elastic fracture mechanics, or on Neuber's rule of stress and strain ooncentrations. The former is preferable on the grounds of theoretical models of crack tip plasticity, although either may be used as the basis of an effeotive design criteria against crack initiation. Fatigue lives fol1owing initiation were found to follow predictions based on the integration of a Paris type power law. The effect of residual stresses from the welding operation on both initiation and propagation was accounted for by a Forman type equation. This incorporated the notional stress ratio produced by the residual stresses after various heat treatments. A fracture mechanics analysis was found to be useful in describing the fatigue behaviour of the weldments at increased temperatures up to 300°C. It is pointed out, however, that the complex interaction of residual stresses, frequency, and changes in fracture mode necessitate great caution in the application of any general design criteria against crack initiation and growth at elevated. temperatures.