Evaluation of the identification protocol for newborns in a private hospital

This exploratory-descriptive quantitative study aimed to evaluate the protocol for identifying newborns admitted to the Neonatal Intensive and Semi-intensive Therapy Unit of a private hospital. The case series was made up of 540 observation opportunities, selected by simple random probability sampling. The data was collected between May and August 2010 according to a form and analyzed by descriptive statistic. The protocol's general performance had a conformity index of 82.2%. There were three stages to the protocol: identification components, the identification wristbands' condition and the number of identification wristbands. The highest percentage of conformity (93%) was attributed to the second stage and the lowest (89.3%) to the third, presenting a statistically significant difference of p=0.046. In the group of 'special' neonates, 88.5% conformity was achieved. These results will make it possible to restructure the protocol for identifying newborns and to establish care and managerial goals so as to improve the quality of care and the patients' safety.

Gauging food and nutritional care quality in hospitals

Background: Food and nutritional care quality must be assessed and scored, so as to improve health institution efficacy. This study aimed to detect and compare actions related to food and nutritional care quality in public and private hospitals. Methods: Investigation of the Hospital Food and Nutrition Service (HFNS) of 37 hospitals by means of structured interviews assessing two quality control corpora, namely nutritional care quality (NCQ) and hospital food service quality (FSQ). HFNS was also evaluated with respect to human resources per hospital bed and per produced meal. Results: Comparison between public and private institutions revealed that there was a statistically significant difference between the number of hospital beds per HFNS staff member (p = 0.02) and per dietitian (p < 0.01). The mean compliance with NCQ criteria in public and private institutions was 51.8% and 41.6%, respectively. The percentage of public and private health institutions in conformity with FSQ criteria was 42.4% and 49.1%, respectively. Most of the actions comprising each corpus, NCQ and FSQ, varied considerably between the two types of institution. NCQ was positively influenced by hospital type (general) and presence of a clinical dietitian. FSQ was affected by institution size: large and medium-sized hospitals were significantly better than small ones. Conclusions: Food and nutritional care in hospital is still incipient, and actions concerning both nutritional care and food service take place on an irregular basis. It is clear that the design of food and nutritional care in hospital indicators is mandatory, and that guidelines for the development of actions as well as qualification and assessment of nutritional care are urgent.

Formazione, apprendimento e nuove prospettive e-learning. Lo sviluppo delle nuove tecnologie didattiche e la creazione di sistemi di apprendimento lungo l’intero arco della vita

The thesis of this paper is based on the assumption that the socio-economic system in which we are living is characterised by three great trends: growing attention to the promotion of human capital; extremely rapid technological progress, based above all on the information and communication technologies (ICT); the establishment of new production and organizational set-ups. These transformation processes pose a concrete challenge to the training sector, which is called to satisfy the demand for new skills that need to be developed and disseminated. Hence the growing interest that the various training sub-systems devote to the issues of lifelong learning and distance learning. In such a context, the so-called e-learning acquires a central role. The first chapter proposes a reference theoretical framework for the transformations that are shaping post-industrial society. It analyzes some key issues such as: how work is changing, the evolution of organizational set-ups and the introduction of learning organization, the advent of the knowledge society and of knowledge companies, the innovation of training processes, and the key role of ICT in the new training and learning systems. The second chapter focuses on the topic of e-learning as an effective training model in response to the need for constant learning that is emerging in the knowledge society. This chapter starts with a reflection on the importance of lifelong learning and introduces the key arguments of this thesis, i.e. distance learning (DL) and the didactic methodology called e-learning. It goes on with an analysis of the various theoretic and technical aspects of e-learning. In particular, it delves into the theme of e-learning as an integrated and constant training environment, characterized by customized programmes and collaborative learning, didactic assistance and constant monitoring of the results. Thus, all the aspects of e-learning are taken into exam: the actors and the new professionals, the virtual communities as learning subjects, the organization of contents in learning objects, the conformity to international standards, the integrated platforms and so on. The third chapter, which concludes the theoretic-interpretative part, starts with a short presentation of the state-of-the-art e-learning international market that aims to understand its peculiarities and its current trends. Finally, we focus on some important regulation aspects related to the strong impulse given by the European Commission first, and by the Italian governments secondly, to the development and diffusion of e-learning. The second part of the thesis (chapters 4, 5 and 6) focus on field research, which aims to define the Italian scenario for e-learning. In particular, we have examined some key topics such as: the challenges of training and the instruments to face such challenges; the new didactic methods and technologies for lifelong learning; the level of diffusion of e-learning in Italy; the relation between classroom training and online training; the main factors of success as well as the most critical aspects of the introduction of e-learning in the various learning environments. As far as the methodological aspects are concerned, we have favoured a qualitative and quantitative analysis. A background analysis has been done to collect the statistical data available on this topic, as well as the research previously carried out in this area. The main source of data is constituted by the results of the Observatory on e-learning of Aitech-Assinform, which covers the 2000s and four areas of implementation (firms, public administration, universities, school): the thesis has reviewed the results of the last three available surveys, offering a comparative interpretation of them. We have then carried out an in-depth empirical examination of two case studies, which have been selected by virtue of the excellence they have achieved and can therefore be considered advanced and emblematic experiences (a large firm and a Graduate School).

Sviluppo, implementazione e valutazione funzionale di un nuovo modello protesico di caviglia

Total ankle arthroplasty (TAA) is still not as satisfactory as total hip and total knee arthroplasty. For the TAA to be considered a valuable alternative to ankle arthrodesis, an effective range of ankle mobility must be recovered. The disappointing clinical results of the current generation of TAA are mostly related to poor understanding of the structures guiding ankle joint mobility. A new design (BOX Ankle) has been developed, uniquely able to restore physiologic ankle mobility and a natural relationship between the implanted components and the retained ligaments. For the first time the shapes of the tibial and talar components in the sagittal plane were designed to be compatible with the demonstrated ligament isometric rotation. This resulted in an unique motion at the replaced ankle where natural sliding as well as rolling motion occurs while at the same time full conformity is maintained between the three components throughout the flexion arc. According to prior research, the design features a spherical convex tibial component, a talar component with radius of curvature in the sagittal plane longer than that of the natural talus, and a fully conforming meniscal component. After computer-based modelling and preliminary observations in several trial implantation in specimens, 126 patients were implanted in the period July 2003 – December 2008. 75 patients with at least 6 months follow-up are here reported. Mean age was 62,6 years (range 22 – 80), mean follow-up 20,2 months. The AOFAS clinical score systems were used to assess patient outcome. Radiographs at maximal dorsiflexion and maximal plantar flexion confirmed the meniscalbearing component moves anteriorly during dorsiflexion and posteriorly during plantarflexion. Frontal and lateral radiographs in the patients, show good alignment of the components, and no signs of radiolucency or loosening. The mean AOFAS score was observed to go from 41 pre-op to 74,6 at 6 month follow-up, with further improvement at the following follow-up. These early results reveal satisfactory clinical scores, with good recovery of range of motion and reduction of pain. Radiographic assessment reveals good osteointegration. All these preliminary results confirm biomechanical studies and the validity of this novel ligamentcompatible prosthesis design. Surely it will be important to re-evaluate these patients later.

Dielektrische Relaxation und Retardation lokaler Prozesse in glasbildenden Materialien

Lokale sekundäre Prozesse in glasbildenden Materialien sind wegen ihrer Wechselwirkung mit der primären Relaxation von besonderem Interesse. Für D-Sorbitol wurde die beta-Relaxation mit drei verschiedenen dielektrischen Meßtechniken untersucht und die Ergebnisse miteinander verglichen. Im Gegensatz zu konventionellen Messungen der dielektrischen Retardation, detektiert eine echte dielektrische Relaxationsmessung den Zerfall des elektrischen Feldes unter der Bedingung einer konstanten dielektrischen Verschiebung. Eine weitere dielektrische Relaxationsmethode ist die Solvatationsdynamik. Sie detektiert die dielektrische Relaxation in der direkten Umgebung eines Farbstoffmoleküls. Die Übereinstimmung der lokal ermittelten und der makroskopisch gemittelten Ergebnisse für den Glaszustand weisen darauf hin, daß die Sekundärrelaxation in D-Sorbitol eine räumlich homogene Eigenschaft ist. Im Gegensatz zu beta-Prozessen anderer Materialien, zeigt nur der abgeschreckte Glaszustand von ortho-Terphenyl einen sekundären Prozeß. Es wurde beobachtet, daß die beta-Amplitude beim Ausheilen langsam abnimmt und im Gleichgewichtszustand der Flüssigkeit oberhalb der Glasübergangstemperatur völlig verschwindet. Viele glasbildende Materialien, wie z. B. Salol zeigen keinen dielektrischen beta-Prozeß. Im Gegensatz zu Messungen mit Standardkühlraten, zeigt eine stark abgeschreckte Salol-Probe eine symmetrische dielektrische Sekundärrelaxation. Diese neuartige Eigenschaft von Salol verschwindet irreversibel, wenn sich die Temperatur der Glasübergangstemperatur nähert.

Biomass Gasification - Process analysis and dimensioning aspects for downdraft units and gas cleaning lines

In such territories where food production is mostly scattered in several small / medium size or even domestic farms, a lot of heterogeneous residues are produced yearly, since farmers usually carry out different activities in their properties. The amount and composition of farm residues, therefore, widely change during year, according to the single production process periodically achieved. Coupling high efficiency micro-cogeneration energy units with easy handling biomass conversion equipments, suitable to treat different materials, would provide many important advantages to the farmers and to the community as well, so that the increase in feedstock flexibility of gasification units is nowadays seen as a further paramount step towards their wide spreading in rural areas and as a real necessity for their utilization at small scale. Two main research topics were thought to be of main concern at this purpose, and they were therefore discussed in this work: the investigation of fuels properties impact on gasification process development and the technical feasibility of small scale gasification units integration with cogeneration systems. According to these two main aspects, the present work was thus divided in two main parts. The first one is focused on the biomass gasification process, that was investigated in its theoretical aspects and then analytically modelled in order to simulate thermo-chemical conversion of different biomass fuels, such as wood (park waste wood and softwood), wheat straw, sewage sludge and refuse derived fuels. The main idea is to correlate the results of reactor design procedures with the physical properties of biomasses and the corresponding working conditions of gasifiers (temperature profile, above all), in order to point out the main differences which prevent the use of the same conversion unit for different materials. At this scope, a gasification kinetic free model was initially developed in Excel sheets, considering different values of air to biomass ratio and the downdraft gasification technology as particular examined application. The differences in syngas production and working conditions (process temperatures, above all) among the considered fuels were tried to be connected to some biomass properties, such elementary composition, ash and water contents. The novelty of this analytical approach was the use of kinetic constants ratio in order to determine oxygen distribution among the different oxidation reactions (regarding volatile matter only) while equilibrium of water gas shift reaction was considered in gasification zone, by which the energy and mass balances involved in the process algorithm were linked together, as well. Moreover, the main advantage of this analytical tool is the easiness by which the input data corresponding to the particular biomass materials can be inserted into the model, so that a rapid evaluation on their own thermo-chemical conversion properties is possible to be obtained, mainly based on their chemical composition A good conformity of the model results with the other literature and experimental data was detected for almost all the considered materials (except for refuse derived fuels, because of their unfitting chemical composition with the model assumptions). Successively, a dimensioning procedure for open core downdraft gasifiers was set up, by the analysis on the fundamental thermo-physical and thermo-chemical mechanisms which are supposed to regulate the main solid conversion steps involved in the gasification process. Gasification units were schematically subdivided in four reaction zones, respectively corresponding to biomass heating, solids drying, pyrolysis and char gasification processes, and the time required for the full development of each of these steps was correlated to the kinetics rates (for pyrolysis and char gasification processes only) and to the heat and mass transfer phenomena from gas to solid phase. On the basis of this analysis and according to the kinetic free model results and biomass physical properties (particles size, above all) it was achieved that for all the considered materials char gasification step is kinetically limited and therefore temperature is the main working parameter controlling this step. Solids drying is mainly regulated by heat transfer from bulk gas to the inner layers of particles and the corresponding time especially depends on particle size. Biomass heating is almost totally achieved by the radiative heat transfer from the hot walls of reactor to the bed of material. For pyrolysis, instead, working temperature, particles size and the same nature of biomass (through its own pyrolysis heat) have all comparable weights on the process development, so that the corresponding time can be differently depending on one of these factors according to the particular fuel is gasified and the particular conditions are established inside the gasifier. The same analysis also led to the estimation of reaction zone volumes for each biomass fuel, so as a comparison among the dimensions of the differently fed gasification units was finally accomplished. Each biomass material showed a different volumes distribution, so that any dimensioned gasification unit does not seem to be suitable for more than one biomass species. Nevertheless, since reactors diameters were found out quite similar for all the examined materials, it could be envisaged to design a single units for all of them by adopting the largest diameter and by combining together the maximum heights of each reaction zone, as they were calculated for the different biomasses. A total height of gasifier as around 2400mm would be obtained in this case. Besides, by arranging air injecting nozzles at different levels along the reactor, gasification zone could be properly set up according to the particular material is in turn gasified. Finally, since gasification and pyrolysis times were found to considerably change according to even short temperature variations, it could be also envisaged to regulate air feeding rate for each gasified material (which process temperatures depend on), so as the available reactor volumes would be suitable for the complete development of solid conversion in each case, without even changing fluid dynamics behaviour of the unit as well as air/biomass ratio in noticeable measure. The second part of this work dealt with the gas cleaning systems to be adopted downstream the gasifiers in order to run high efficiency CHP units (i.e. internal engines and micro-turbines). Especially in the case multi–fuel gasifiers are assumed to be used, weightier gas cleaning lines need to be envisaged in order to reach the standard gas quality degree required to fuel cogeneration units. Indeed, as the more heterogeneous feed to the gasification unit, several contaminant species can simultaneously be present in the exit gas stream and, as a consequence, suitable gas cleaning systems have to be designed. In this work, an overall study on gas cleaning lines assessment is carried out. Differently from the other research efforts carried out in the same field, the main scope is to define general arrangements for gas cleaning lines suitable to remove several contaminants from the gas stream, independently on the feedstock material and the energy plant size The gas contaminant species taken into account in this analysis were: particulate, tars, sulphur (in H2S form), alkali metals, nitrogen (in NH3 form) and acid gases (in HCl form). For each of these species, alternative cleaning devices were designed according to three different plant sizes, respectively corresponding with 8Nm3/h, 125Nm3/h and 350Nm3/h gas flows. Their performances were examined on the basis of their optimal working conditions (efficiency, temperature and pressure drops, above all) and their own consumption of energy and materials. Successively, the designed units were combined together in different overall gas cleaning line arrangements, paths, by following some technical constraints which were mainly determined from the same performance analysis on the cleaning units and from the presumable synergic effects by contaminants on the right working of some of them (filters clogging, catalysts deactivation, etc.). One of the main issues to be stated in paths design accomplishment was the tars removal from the gas stream, preventing filters plugging and/or line pipes clogging At this scope, a catalytic tars cracking unit was envisaged as the only solution to be adopted, and, therefore, a catalytic material which is able to work at relatively low temperatures was chosen. Nevertheless, a rapid drop in tars cracking efficiency was also estimated for this same material, so that an high frequency of catalysts regeneration and a consequent relevant air consumption for this operation were calculated in all of the cases. Other difficulties had to be overcome in the abatement of alkali metals, which condense at temperatures lower than tars, but they also need to be removed in the first sections of gas cleaning line in order to avoid corrosion of materials. In this case a dry scrubber technology was envisaged, by using the same fine particles filter units and by choosing for them corrosion resistant materials, like ceramic ones. Besides these two solutions which seem to be unavoidable in gas cleaning line design, high temperature gas cleaning lines were not possible to be achieved for the two larger plant sizes, as well. Indeed, as the use of temperature control devices was precluded in the adopted design procedure, ammonia partial oxidation units (as the only considered methods for the abatement of ammonia at high temperature) were not suitable for the large scale units, because of the high increase of reactors temperature by the exothermic reactions involved in the process. In spite of these limitations, yet, overall arrangements for each considered plant size were finally designed, so that the possibility to clean the gas up to the required standard degree was technically demonstrated, even in the case several contaminants are simultaneously present in the gas stream. Moreover, all the possible paths defined for the different plant sizes were compared each others on the basis of some defined operational parameters, among which total pressure drops, total energy losses, number of units and secondary materials consumption. On the basis of this analysis, dry gas cleaning methods proved preferable to the ones including water scrubber technology in al of the cases, especially because of the high water consumption provided by water scrubber units in ammonia adsorption process. This result is yet connected to the possibility to use activated carbon units for ammonia removal and Nahcolite adsorber for chloride acid. The very high efficiency of this latter material is also remarkable. Finally, as an estimation of the overall energy loss pertaining the gas cleaning process, the total enthalpy losses estimated for the three plant sizes were compared with the respective gas streams energy contents, these latter obtained on the basis of low heating value of gas only. This overall study on gas cleaning systems is thus proposed as an analytical tool by which different gas cleaning line configurations can be evaluated, according to the particular practical application they are adopted for and the size of cogeneration unit they are connected to.

Genomische Struktur und Promotorcharakterisierung des humanen ADAM10-Gens

Das ADAM10-Gen kodiert für eine membrangebundene Disintegrin-Metalloproteinase, die das Amyloidvorläuferprotein spaltet. Im Mausmodell konnte bewiesen werden, dass die Überexpression von ADAM10 die Plaquebildung vermindern und das Langzeitgedächtnis verbessert. Aus diesem Grund ist es für einen möglichen Therapieansatz für die Alzheimer’sche Erkrankung erforderlich, die Organisation des humanen ADAM10-Gens und seines Promotors aufzuklären. Beim Vergleich der genomischen Sequenzen von humanem und murinem ADAM10 zeigte sich eine hohe Übereinstimmung. Beide Gene umfassen 160 kbp und bestehen aus 16 Exons. Die ersten 500 bp stromaufwärts vom Translationsstartpunkt zwischen dem Menschen, der Maus und der Ratte sind hoch konserviert. Diese Region beinhaltet spezifische regulatorische Elemente, die die ADAM10-Transkription modulieren. In den ersten 2179 bp stromaufwärts vom humanen ADAM10-Translationsstartpunkt fanden sich einige potentiellen Transkriptionsfaktor-bindungsstellen (Brn-2, SREBP, Oct-1, Creb1/cJun, USF, Maz, MZF-1, NFkB und CDPCR3HD). Es wurde eine charakteristische GC-Box und eine CAAT-Box, aber keine TATA-Box identifiziert. Nach Klonierung dieser 2179 bp großen Region wurde eine starke Promotoraktivität, insbesondere in neuronalen Zelllinien, gefunden. Bei der Analyse von Deletionskonstrukten wurde die Region zwischen -508 und -300 als essentiell für die Transkriptionsaktivierung bestimmt. Die Promotoraktivität wird zudem streng herunterreguliert, wenn in die Region 317 bp stromaufwärts vom Startpunkt der Translation eine Punktmutation eingeführt wird. Diese per Computeranalyse als USF-Bindungsstelle deklarierte Region spielt eine zentrale Rolle bei der ADAM10-Transkription. Im EMSA wurde eine Protein-DNA-Interaktion für diese Region gezeigt. Durch transienten Transfektionen in Schneider Drosophila Insektenzellen konnte nachgewiesen werden, dass die Überexpression von Sp1 und USp3 für die ADAM10-Promotoraktivität entscheidend ist. In EMSA-Studien bestätigte sich eine Protein-DNA-Interaktion für die Region -366 bp stromaufwärts vom Translationsstartpunkt. Die Punktmutation in der CAAT-Box veränderte die die Promotoraktivität nicht. Da weiterhin für diese potentielle Bindungsstelle kein Bindungsfaktor vorausgesagt wurde, scheint die CAAT-Box keine Bedeutung bei der Promotorregulation zu spielen. Schließlich fand sich im EMSA eine Protein-DNA-Interaktion für die Bindungsstelle 203 bp stromaufwärts vom Translationsstartpunkt. Diese in Computeranalysen als RXR-Bindungsstelle identifizierte Region ist ebenfalls von Bedeutung in der Promotorregulation. Auf der Suche nach Substanzen, die die ADAM10-Promotoraktivität beeinflussen, wurde ein negativer Effekt durch die apoptoseauslösende Substanz Camptothecin und ein positiver Effekt durch die zelldifferenzierungsauslösende Substanz all-trans Retinsäure festgestellt. Mit dieser Arbeit wurde die genomische Organisation des ADAM10-Gens zusammen mit dem zugehörigen Promotor aufgeklärt und ein neuer Regulationsmechanismus für die Hochregulation der Expression der alpha-Sekretase ADAM10 gefunden. Im Weiteren sollen nun die genauen Mechanismen bei der Hochregulation der alpha-Sekretase ADAM10 durch Retinsäure untersucht und durch Mikroarray-Analysen an RNA-Proben transgener Mäuse, welche ADAM10 überexpremieren, neue therapeutische Ansätze zur Behandlung der Alzheimer´schen Erkrankung identifiziert werden.

Gesù continuatore di Giovanni. Studio storico-esegetico sulla relazione tra Gesù di Nazaret e Giovanni il Battista

L’enigma della relazione tra Gesù e Giovanni il Battista ha da sempre stimolato l’immaginazione storica degli studiosi, suscitando una varietà di ipotesi e valutazioni, spesso assai diverse. Ciò nonostante, tutti concordano su un punto: che, almeno nella sua fase maggiore in Galilea, il ministero di Gesù fosse una realtà essenzialmente autonoma, diversa, originale e irriducibile rispetto alla missione di Giovanni. In controtendenza con questa “impostazione predefinita”, il presente studio sostiene la tesi secondo cui Gesù portò avanti la sua missione come intenzionale e programmatica prosecuzione dell’opera prematuramente interrotta di Giovanni. Nella prima parte, si esamina approfonditamente quale memoria della relazione sia conservata nelle fonti più antiche, cioè Q (qui analizzata con particolare attenzione) e Marco – a cui si aggiunge Matteo, che, in ragione dello stretto legame storico-sociologico con Q, offre un esempio illuminante di rinarrazione della memoria altamente originale eppure profondamente fedele. La conclusione è che la memoria più antica della relazione Gesù-Giovanni è profondamente segnata da aspetti di accordo, conformità e allineamento. Nella seconda parte si esaminano una serie di tradizioni che attestano che Gesù era percepito pubblicamente in relazione al Battista e che egli stesso condivideva e alimentava tale percezione riallacciandosi a lui in polemica con i suoi avversari, e dipingendolo come una figura di capitale importanza nella predicazione e nell’insegnamento a seguaci e discepoli. Infine, si argomenta l’esistenza di ampie e sostanziali aree di accordo tra i due a livello di escatologia, istruzioni etiche e programma sociale, missione penitenziale verso i peccatori e attività battesimale. L’ipotesi che Gesù portasse avanti l’attività riformatrice di Giovanni, in termini di una campagna purificatoria “penitenziale-battesimale-esorcistica” in preparazione dell’avvento di Dio, consente infine di armonizzare in modo soddisfacente i due aspetti più caratteristici dell’attività di Gesù (normalmente giustapposti, quando non contrapposti): escatologia e miracoli, il Gesù profeta e il Gesù taumaturgo.

Estimation of the risks of thermal stress due to the microclimate for manual fruit and vegetable harvesters in central Italy

Agricultural workers are exposed to various risks, including chemical agents, noise, and many other factors. One of the most characteristic and least known risk factors is constituted by the microclimatic conditions in the different phases of work (in field, in greenhouse, etc). A typical condition is thermal stress due to high temperatures during harvesting operations in open fields or in greenhouses. In Italy, harvesting is carried out for many hours during the day, mainly in the summer, with temperatures often higher than 30 degrees C. According to ISO 7243, these conditions can be considered dangerous for workers' health. The aim of this study is to assess the risks of exposure to microclimatic conditions (heat) for fruit and vegetable harvesters in central Italy by applying methods established by international standards. In order to estimate the risk for workers, the air temperature, radiative temperature, and air speed were measured using instruments in conformity with ISO 7726. Thermodynamic parameters and two more subjective parameters, clothing and the metabolic heat production rate related to the worker's physical activity, were used to calculate the predicted heat strain (PHS) for the exposed workers in conformity with ISO 7933. Environmental and subjective parameters were also measured for greenhouse workers, according to ISO 7243, in order to calculate the wet-bulb globe temperature (WBGT). The results show a slight risk for workers during manual harvesting in the field. On the other hand, the data collected in the greenhouses show that the risk for workers must not be underestimated. The results of the study show that, for manual harvesting work in climates similar to central Italy, it is essential to provide plenty of drinking water and acclimatization for the workers in order to reduce health risks. Moreover, the study emphasizes that the possible health risks for greenhouse workers increase from the month of April through July.

The Constitutional-Judicial Control of the Legislative and Executive Powers in Central and Eastern European Countries

This project looked at the nature, contents, methods, means and legal and political effects of the influence that constitutional courts exercise upon the legislative and executive powers in the newly established democracies of Central and Eastern Europe. The basic hypothesis was that these courts work to provide a limitation of political power within the framework of the principal constitutional values and that they force the legislature and executive to exercise their powers and duties in strict accordance with the constitution. Following a study of the documentary sources, including primarily the relevant constitutional and statutory provisions and decisions of constitutional courts, Mr. Cvetkovski prepared a questionnaire on various aspects of the topics researched and sent it to the respective constitutional courts. A series of direct interviews with court officials in six of the ten countries then served to clarify a large number of questions relating to differences in procedures etc. that arose from the questionnaires. As a final stage, the findings were compared with those described in recent publications on constitutional control in general and in Central and Eastern Europe in particular. The study began by considering the constitutional and political environment of the constitutional courts' activities in controlling legislative and executive powers, which in all countries studied are based on the principles of the rule of law and the separation of powers. All courts are separate bodies with special status in terms of constitutional law and are independent of other political and judicial institutions. The range of matters within their jurisdiction is set by the constitution of the country in question but in all cases can be exercised only with the framework of procedural rules. This gives considerable significance to the question of who sets these rules and different countries have dealt with it in different ways. In some there is a special constitutional law with the same legal force as the constitution itself (Croatia), the majority of countries allow for regulation by an ordinary law, Macedonia gives the court the autonomy to create and change its own rules of procedure, while in Hungary the parliament fixes the rules on procedure at the suggestion of the constitutional court. The question of the appointment of constitutional judges was also considered and of the mechanisms for ensuring their impartiality and immunity. In the area of the courts' scope for providing normative control, considerable differences were found between the different countries. In some cases the courts' jurisdiction is limited to the normative acts of the respective parliaments, and there is generally no provision for challenging unconstitutional omissions by legislation and the executive. There are, however, some situations in which they may indirectly evaluate the constitutionality of legislative omissions, as when the constitution contains provision for a time limit on enacting legislation, when the parliament has made an omission in drafting a law which violates the constitutional provisions, or when a law grants favours to certain groups while excluding others, thereby violating the equal protection clause of the constitution. The control of constitutionality of normative acts can be either preventive or repressive, depending on whether it is implemented before or after the promulgation of the law or other enactment being challenged. In most countries in the region the constitutional courts provide only repressive control, although in Hungary and Poland the courts are competent to perform both preventive and repressive norm control, while in Romania the court's jurisdiction is limited to preventive norm control. Most countries are wary of vesting constitutional courts with preventive norm control because of the danger of their becoming too involved in the day-to-day political debate, but Mr. Cvetkovski points out certain advantages of such control. If combined with a short time limit it can provide early clarification of a constitutional issue, secondly it avoids the problems arising if a law that has been in force for some years is declared to be unconstitutional, and thirdly it may help preserve the prestige of the legislation. Its disadvantages include the difficulty of ascertaining the actual and potential consequences of a norm without the empirical experience of the administration and enforcement of the law, the desirability of a certain distance from the day-to-day arguments surrounding the political process of legislation, the possible effects of changing social and economic conditions, and the danger of placing obstacles in the way of rapid reactions to acute situations. In the case of repressive norm control, this can be either abstract or concrete. The former is initiated by the supreme state organs in order to protect abstract constitutional order and the latter is initiated by ordinary courts, administrative authorities or by individuals. Constitutional courts cannot directly oblige the legislature and executive to pass a new law and this remains a matter of legislative and executive political responsibility. In the case of Poland, the parliament even has the power to dismiss a constitutional court decision by a special majority of votes, which means that the last word lies with the legislature. As the current constitutions of Central and Eastern European countries are newly adopted and differ significantly from the previous ones, the courts' interpretative functions should ensure a degree of unification in the application of the constitution. Some countries (Bulgaria, Hungary, Poland, Slovakia and Russia) provide for the constitutional courts' decisions to have a binding role on the constitutions. While their decisions inevitably have an influence on the actions of public bodies, they do not set criteria for political behaviour, which depends rather on the overall political culture and traditions of the society. All constitutions except that of Belarus, provide for the courts to have jurisdiction over conflicts arising from the distribution of responsibilities between different organs and levels in the country, as well for impeachment procedures against the head of state, and for determining the constitutionality of political parties (except in Belarus, Hungary, Russia and Slovakia). All the constitutions studied guarantee individual rights and freedoms and most courts have jurisdiction over complaints of violation of these rights by the constitution. All courts also have some jurisdiction over international agreements and treaties, either directly (Belarus, Bulgaria and Hungary) before the treaty is ratified, or indirectly (Croatia, Czech Republic, Macedonia, Romania, Russia and Yugoslavia). In each country the question of who may initiate proceedings of norm control is of central importance and is usually regulated by the constitution itself. There are three main possibilities: statutory organs, normal courts and private individuals and the limitations on each of these is discussed in the report. Most courts are limited in their rights to institute ex officio a full-scale review of a point of law, and such rights as they do have rarely been used. In most countries courts' decisions do not have any binding force but must be approved by parliament or impose on parliament the obligation to bring the relevant law into conformity within a certain period. As a result, the courts' position is generally weaker than in other countries in Europe, with parliament remaining the supreme body. In the case of preventive norm control a finding of unconstitutionality may act to suspend the law and or to refer it back to the legislature, where in countries such as Romania it may even be overturned by a two-thirds majority. In repressive norm control a finding of unconstitutionality generally serves to take the relevant law out of legal force from the day of publication of the decision or from another date fixed by the court. If the law is annulled retrospectively this may or may not bring decisions of criminal courts under review, depending on the provisions laid down in the relevant constitution. In cases relating to conflicts of competencies the courts' decisions tend to be declaratory and so have a binding effect inter partes. In the case of a review of an individual act, decisions generally become effective primarily inter partes but is the individual act has been based on an unconstitutional generally binding normative act of the legislature or executive, the findings has quasi-legal effect as it automatically initiates special proceedings in which the law or other regulation is to be annulled or abrogated with effect erga omnes. This wards off further application of the law and thus further violations of individual constitutional rights, but also discourages further constitutional complaints against the same law. Thus the success of one individual's complaint extends to everyone else whose rights have equally been or might have been violated by the respective law. As the body whose act is repealed is obliged to adopt another act and in doing so is bound by the legal position of the constitutional court on the violation of constitutionally guaranteed freedoms and rights of the complainant, in this situation the decision of the constitutional court has the force of a precedent.

Current Changes in the Lifestyle and Mental Health of Teenagers

The group studied 1,253 students from various types of schools chosen randomly from those in Prague and Budejovice in order to evaluate the life styles, prevailing value standards, attitudes and behavioural patterns of Czech adolescents. The respondents (including 614 men and 639 women with an average age of 16.4 years) completed questionnaires containing standard scales focusing on feelings about social life, conservative and authoritarian tendencies, levels of self-esteem, general health, eating attitudes and behaviour The adolescents showed a relatively high level of conformity with authoritarian, conservative tendencies and with a dictate of power, rigid conventionality, ethnocentrism and low inner tolerance of differences, their scores being higher than those found in Western European countries. These tendencies were stronger among students outside Prague and those attending vocational schools. As the level of education rose, the sense of fatality and social determination decreased, indicating a higher share of responsibility for events in the surrounding world. When changes of life style were considered, adolescents can be expected to adapt more easily to more risky, socially attractive and manifest models of attitudes and behaviour. On the one hand, adolescents were often involved in sports, and young women in particular often showed a extreme concern and care for their own bodies. On the other hand, one quarter of respondents smoked, one fifth reported serious problems with alcohol and one quarter had already had some experience with drugs. One third of young men and one quarter of young women reported regular consumption of alcohol, and 6.5 percent of men and 3.6 percent of women regularly smoked marihuana or hashish. For the majority of adolescents, life conditions and conformity seem to be more important than the sense of active choice and responsibility for one's own life.

Canine microglial cells: stereotypy in immunophenotype and specificity in function?

Microglial cells represent the endogenous immune system of the central nervous system (CNS). Upon pathological insults they reveal their immunological potential aimed at regaining homeostasis. These reactions have long been believed to follow a uniform and unspecific pattern which is irrespective to the underlying disease entity. Evidence is growing that this view seriously underrates microglial competence as the defenders of the CNS. In the present study, microglial cells of 47 dogs were examined ex vivo by means of flow cytometry. Ex vivo examination included immunophenotypic characterization using eight different surface markers and functional studies such as phagocytosis assay and the reactive oxygen species (ROS) generation test. The dogs were classified according to their histopathological diagnoses in disease categories (controls, canine distemper virus (CDV) induced demyelination, other diseases of the CNS) and results of microglial reaction profiles were compared. Immunophenotypic characterization generally revealed relative high conformity in the microglial disease response among the different groups, however the functional response was shown to be more specific. Dogs with intracranial inflammation and dogs with demyelination showed an enhanced phagocytosis, whereas a significant up-regulation of ROS generation was found in dogs with demyelination due to CDV infection. This strongly suggests a specific response of microglia to infection with CDV in the settings of our study and underlines the pivotal role of microglial ROS generation in the pathogenesis of demyelinating diseases, such as canine distemper.

Anomic Crime in Post-Welfarist Societies. Cult of the Individual, Integration Patterns and Delinquency

Post-Fordist economies come along with post-welfarist societies marked by intensified cultural individualism and increased structural inequalities. These conditions are commonly held to be conducive to relative deprivation and, thereby, anomic crime. At the same time, post-welfarist societies develop a new ‘balance of power’ between institutions providing for welfare regulation, such as the family, the state and the (labour) market – and also the penal system. These institutions are generally expected to improve social integration, ensure conformity and thus reduce anomic crime. Combining both perspectives, we analyse the effects of moral individualism, social inequality, and different integration strategies on crime rates in contemporary societies through the lenses of anomie theory. To test our hypotheses, we draw on time-series cross-section data compiled from different data sources (OECD, UN, WHO, WDI) for twenty developed countries in the period 1970-2004, and run multiple regressions that control for country-specific effects. Although we find some evidence that the mismatch between cultural ideal (individual inclusion) and structural reality (stratified exclusion) increases the anomic pressure, whereas conservative (i. e. family-based), social-democratic (i. e. state-based) and liberal (i. e. market-based) integration strategies to a certain extent prove effective in controlling the incidence of crime, the results are not very robust. Moreover, reservations have to be made regarding the effects of “market” income inequality as well as familialist, unionist and liberalist employment policies that are shown to have reversed effects in our sample: the former reducing, the latter occasionally increasing anomic crime. As expected, the mismatch between cultural ideal (individual inclusion) and structural reality (stratified exclusion) increases the anomic pressure, whereas conservative (i. e. family-based), social-democratic (i. e. state-based) and liberal (i. e. market-based) integration strategies generally prove effective in controlling the incidence of crime. Nevertheless, we conclude that the new cult of the individual undermines the effectiveness of conservative and social-democratic integration strategies and drives societies towards more “liberal” regimes that build on incentive as well as punitive elements.

Die Auswirkungen der E-Commerce-Regelungen der EU-Richtlinie über Verbraucherrechte auf das BGB

This article investigates the effect of the Consumer Rights Directive 2011/83/EU on the German BGB. Special emphasis is placed on e-com- merce-relevant legislation. The article is based on the argument that European law requires the German legislator, when it transposes Directives intended to create rights for individuals into the BGB, to do so inbest conformity with the BGB’s current system. It therefore browses through the BGB’s relevant norms and investigates how such a transposition may be achieved. It will conclude that such a transposition is possible, but that the German legislator should de- vote more time to investigate how such transposi- tion shall be acquired.

Fractionated stereotactic radiotherapy with static field conformal and non coplanar arcs for pediatric patients with craniopharyngioma: analysis of long term visual outcome and endocrine toxicity

We assessed the efficacy and the toxicity for pediatric craniopharyngioma patients of fractionated stereotactic radiotherapy (FSRT). Between May 2000 and May 2009, 9 patients (male to female ratio, 5:4) with craniopharyngiomas underwent FSRT (median dose, 54 Gy). Among the 9 patients, 6 received radiation therapy (RT) for recurrent tumors and 3 for residual disease as adjuvant therapy after incomplete surgery. Median tumor 3 volume was 2.3 cm (range, 0.1-5.8). The median target coverage was 93.7% (range 79.3-99.8%). The median conformity index was 0.94 (range, 0.6-1.4). Dose to the hippocampal region was assessed for all patients. After a median follow-up of 62.5 months (range, 32-127)the treated volume decreased in size in four of eight patients (50%). One patient was lost to follow-up. Local control and survival rates at 3 years were 100% and there were no marginal relapses. One patient, with a chronic bilateral papillary oedema after surgery, visual defect deteriorated after FSRT to a complete hemianopsia. One male patient with normal pituitary function before FSRT presented with precocious puberty at the age of 7.4 years, 24 months after FSRT. Four patients (50%) were severely obese at their last visit. FSRT is a safe treatment option for craniopharyngioma after incomplete resection.