Aproveitamento da polpa de coco verde submetida ao congelamento rápido e lento

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Características químicas, físicas e sensoriais de bolos de laranja e pães adicionados de inulina e oligofrutose

Inulin and oligofructose are fructans that can change important characteristics in original products when added in food. Two formulations of orange cakes (one containing 77.7g of inulin and another one 77.7g of oligofructose/inulin) and two formulations of breads (one containing 130g of inulin and another one 175g of oligofructose/inulin) were compared to the respective standard formulations (with no fructans) in relation to chemical composition, texture, volume, color and sensory acceptability with a nine-point hedonic scale. The cakes and breads with inulin and oligofructose/inulin showed greater amount of total dietary fiber in relation to standard products. The orange cake with inulin had lower cohesiveness and yellower dough when compared to the standard cake, but the addition of inulin and oligofructose/inulin reduced the acceptability for appearance, texture and flavor and the overall acceptability, although the acceptability for aroma was the same for the three products. The breads with inulin and oligofructose/inulin were harder and less cohesive than the standard bread, and bread with inulin showed minor volume in relation to the standard. The bread with inulin also presented crust with lower luminosity, dough with higher intensity of redness and yellowness and higher intensity of color in relation to standard, besides different hue. In relation to sensory acceptability, the bread with oligofructose/inulin had higher overall acceptability and flavor when compared to standard bread.

Use of Stress Analysis Methods to Evaluate the Biomechanics of Oral Rehabilitation With Implants

Because the biomechanical behavior of dental implants is different from that of natural tooth, clinical problems may occur. The mechanism of stress distribution and load transfer to the implant/bone interface is a critical issue affecting the success rate of implants. Therefore, the aim of this study was to conduct a brief literature review of the available stress analysis methods to study implant-supported prosthesis loading and to discuss their contributions in the biomechanical evaluation of oral rehabilitation with implants. Several studies have used experimental, analytical, and computational models by means of finite element models (FEM), photoelasticity, strain gauges and associations of these methods to evaluate the biomechanical behavior of dental implants. The FEM has been used to evaluate new components, configurations, materials, and shapes of implants. The greatest advantage of the photoelastic method is the ability to visualize the stresses in complex structures, such as oral structures, and to observe the stress patterns in the whole model, allowing the researcher to localize and quantify the stress magnitude. Strain gauges can be used to assess in vivo and in vitro stress in prostheses, implants, and teeth. Some authors use the strain gauge technique with photoelasticity or FEM techniques. These methodologies can be widely applied in dentistry, mainly in the research field. Therefore, they can guide further research and clinical studies by predicting some disadvantages and streamlining clinical time.

Are new TiNbZr alloys potential substitutes of the Ti6Al4V alloy for dental applications? An electrochemical corrosion study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação do tipo de procedimento odontológico, cirurgia x dentística restauradora, na variabilidade do tempo de duração de dois anestésicos: bupivacaína x prilocaína

Pós-graduação em Odontologia - ICT

Determinação da resistência à flexão de ligas odontológicas, utilizadas em prótese parcial fixa e prótese sobre implante, soldadas por brasagem e a laser

Pós-graduação em Odontologia Restauradora - ICT

Concepção morfológica de fórceps, para intervenção no paciente em posição supina e o operador sentado

Ergonomics, the science of working rationalization, seeks the best relationship between man and his working tools. In Dentistry, ergonomics is present as for the professional working correctly seated, in functional comfort, intervening of supine position patient, by means of suitable equipment and instrument. Nowadays, dental equipment is justly rationalized; however, some instruments should take shape, in order to adapt those requirements. The hand tool design should permit a comfortable, non-slip and safe handling. Thus, anatomical details, the correct position of the operator for its use and specific characteristics of application should be taken into account. The instrument under analysis - forceps - was conceived according to these requirements along with a new alveolar tooth extraction technique, based on electromyographic and biomechanical studies. The morphology of the instrument, which makes possible a simple and natural kinetics of the operator, was obtained by changing the paradigm of the conventional cross-action instruments (whose grip is always on the arms of the tool), divesting the handle from the tool arm. This induced on anatomical conceiving of perpendicular handles to the extremity of the tool arm, resulting an efficient and effective instrument, according to indicated on its experimental phase

Contribuição de indicadores bibliométricos para a pesquisa em Ciência da Informação: análise da produção científica em Odontologia no Brasil

This paper aims at contributing with research about Information Science through analysis of Bibliometric indicators applied to Dentistry in Brazil, comparing the impact of such production with the ones from major countries in that field. The analyzed indicators are the following: total number of citations, self-citations, average of citations received a year and index h. Within the procedures, we outlined, in the Scimago Journal Rank (SJR) the group of producing countries in the field of Dentistry from 1996 to 2009. The results show that Brazil is the only country in Latin America which is among those of major impact in Dentistry. We highlight the role of the Bibliometric indicators as methodological contribution to the research while pointing out the main “performers” in the knowledge field.

Avaliação dos efeitos da terapia fotodinâmica antimicrobiana com o fotossensibilizador ftalocianina-glucamina como terapia adjunta no tratamento da doença periodontal induzida em ratos

Pós-graduação em Odontologia - FOAR

Development of hydrophilic nanocarriers for the charged form of the local anesthetic articaine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Methods to evaluate and strategies to improve the biocompatibility of dental materials and operative techniques

Objective. The general aim of this article is to describe the state-of-the-art of biocompatibility testing for dental materials, and present new strategies for improving operative dentistry techniques and the biocompatibility of dental materials as they relate to their interaction with the dentin-pulp complex.Methods. The literature was reviewed focusing on articles related to biocompatibilty testing, the dentin-pulp complex and new strategies and materials for operative dentistry. For this purpose, the PubMed database as well as 118 articles published in English from 1939 to 2014 were searched. Data concerning types of biological tests and standardization of in vitro and in vivo protocols employed to evaluate the cytotoxicity and biocompatibility of dental materials were also searched from the US Food and Drug Administration (FDA), International Standards Organization (ISO) and American National Standards Institute (ANSI).Results. While there is an ongoing search for feasible strategies in the molecular approach to direct the repair or regeneration of structures that form the oral tissues, it is necessary for professionals to master the clinical therapies available at present. In turn, these techniques must be applied based on knowledge of the morphological and physiological characteristics of the tissues involved, as well as the physical, mechanical and biologic properties of the biomaterials recommended for each specific situation. Thus, particularly within modern esthetic restorative dentistry, the use of minimally invasive operative techniques associated with the use of dental materials with excellent properties and scientifically proved by means of clinical and laboratory studies must be a routine for dentists. This professional and responsible attitude will certainly result in greater possibility of achieving clinical success, benefiting patients and dentists themselves.Signcance. This article provides a general and critical view of the relations that permeate the interaction between dental materials and the dentin-pulp complex, and establish real possibilities and strategies that favor biocompatibility of the present and new products used in Dentistry, which will certainly benefit clinicians and their patients. (C) 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Efeito da hidrotermica em abacate ‘Hass’ sobre a capacidade antioxidante, compostos fenólicos e coloração

This study aimed to determine the antioxidant activity, total phenolic compounds and color in avocado 'Hass' hydrothermally treated. The fruits were hydrothermally treated at 45 degrees C for 5, 10, 15 and 20 min. After treatment, fruit were stored at room temperature (21 +/- 1 degrees C and 70 +/- 5% relative humidity) and cold (10 degrees C +/- 1 and 90 +/- 5% relative humidity). The fruits were analyzed for their antioxidant capacity by DPPH method and phenolic compounds at 0, 3, 9 and 12 days. The fruits color was measured at 0, 3, 6, 9, 12 and 15 days. The control fruits had higher antioxidant capacity and content of phenolic compounds during the storage period, compared to the fruits hydrothermally treated. The hydrothermally treatment altered the behavior as for the maintenance of the antioxidant activity in relation to the fruits control. In spite of superior values of antioxidant activity for the fruits maintained at 21 +/- 1 degrees C and 70 +/- 5% relative humidity, those refrigerated presented better aspect for commercialization. The refrigerated fruits presented better aspect for commercialization in relation to the maintained under room temperature. The brightness, color a * and b * values decreased with the storage days. Values color superiors were observed for the fruits control and those maintained under refrigeration. As it increased the irradiation dose reduced the fruits antioxidant activity and coloration.

Controle de Qualidade em Raios X Odontológico Periapical

The purpose of this work is to provide quality control requirements and security in dental x-rays in order to obtain good quality image which allows the correct diagnosis, which reduces the dose to the patient, mainly due to the repetition of tests, and decreasing cost. The requirements apply to related activities to quality control and procedures using ionizing radiation for diagnostic imaging in dentistry by evaluating a minimum set of parameters to be tested or verified. Quality control follows the Ordinance No. 453 of the Ministry of Health of 06.01.1998, SS Resolution No. 625 of 12.14.1994 and Resolution No. 64 of the Health Surveillance Center – Department of Health of Sao Paulo and National Health Surveillance Agency – Ministry of Health of Brazil. This study was conducted in the city of Marilia, Sao Paulo, along with the Company P&R Consulting and Medical Physics, in a dental clinic of the University UNIMAR in the x-ray equipment used on that site. The physical parameters of the device were tested with the aid of ionization chambers to measure rates of radiation, electrometer to measure rates of time, kV and doses, radiographic films and positioning devices. Finally, this work demonstrates the need and importance of quality control, which one ensures the proper use of x-ray machines, maintaining efficiency and at the same time it reduces the risks to the patient, to the dentist and to the general public

Screening of Conditions for the Preparation of Poly( -Caprolactone) Nanocapsules Containing the Local Anesthetic Articaine

The local anesthetic articaine (ATC) is widely used in dentistry; however, its side effects can include paresthesia and nerve injury. Polymeric nanocapsules (PN) can be used as carriers for drugs, and help to reduce undesirable symptoms. The objective of this study was to evaluate the influence of different factors on the average size, polydispersion, and encapsulation efficiency of PN containing ATC. Poly(ε-caprolactone) (PCL) nanocapsules containing ATC were prepared by the oil-in-water emulsion/solvent evaporation method. The final ATC concentration was 2%. The preparation conditions were optimized using a central composite blocked cube-star design to investigate the influence of two variables at five levels, with 22 factorial points (–1 and +1), two replicates of the central point, 2×2 axial points (–1.414 and +1.414), and an orthogonal distribution, resulting in 10 experiments. The factors varied were the PVA concentration and the sonication time. The nanocapsules showed a satisfactory size range, a polydispersivity index less than 0.2, and high encapsulation efficiency. The values of the factors had no significant influence on either average size or polydispersion, although the encapsulation efficiency was significantly influenced by the sonication time. Improved formulations were identified using the central composite design, which revealed that the main consideration in selecting a suitable formulation was the encapsulation efficiency. Two of the formulations showed both high encapsulation efficiency and colloidal characteristics appropriate for the route of administration.

Redução do medo durante o tratamento odontológico utilizando pontas ultrassônicas

Over the last few years, new technologies have been developed to making cavity preparations, among which the diamond burs CVDentus® (CVDentus, São José dos Campos, Brazil) are outstanding. These points are produced by chemical deposition from the vapor phase, forming a single diamond stone, with greater durability than the conventional diamond burs. Coupled to the ultrasound appliance, they have several clinical applications in Dentistry with advantages over conventional rotary instruments, such as lower pressure, noise, vibration and heat, as well as reducing the need to use local anesthesia, contributing to minimize patient’s fear and anxiety. The aim of this study was to present the complete restorative dental treatment performed with this system in a child patient with a prior history of non-cooperative behavior. The use of this new technology offered the patient greater comfort, making it possible recondition the patient’s attitude to dental treatment, in addition to favoring conservative cavity preparations to be made.