Hemodynamic and ventilatory effects of manual respiratory physiotherapy techniques of chest clapping, vibration, and shaking in an animal model

Chest clapping, vibration, and shaking were studied in 10 physiotherapists who applied these techniques on an anesthetized animal model. Hemodynamic variables (such as heart rate, blood pressure, pulmonary artery pressure, and right atrial pressure) were measured during the application of these techniques to verify claims of adverse events. In addition, expired tidal volume and peak expiratory flow rate were measured to ascertain effects of these techniques. Physiotherapists in this study applied chest clapping at a rate of 6.2 +/- 0.9 Hz, vibration at 10.5 +/- 2.3 Hz, and shaking at 6.2 +/- 2.3 Hz. With the use of these rates, esophageal pressure swings of 8.8 +/- 5.0, 0.7 +/- 0.3, and 1.4 +/- 0.7 mmHg resulted from clapping, vibration, and shaking respectively. Variability in rates and forces generated by these techniques was 80% of variance in shaking force (P = 0.003). Application of these techniques by physiotherapists was found to have no significant effects on hemodynamic and most ventilatory variables in this study. From this study, we conclude that chest clapping, vibration, and shaking 1) can be consistently performed by physiotherapists; 2) are significantly related to physiotherapists' characteristics, particularly clinical experience; and 3) caused no significant hemodynamic effects.

Sex differences in heritability of BMI: A comparative study of results from twin studies in eight countries

Body mass index (BMI), a simple anthropometric measure, is the most frequently used measure of adiposity and has been instrumental in documenting the worldwide increase in the prevalence of obesity witnessed during the last decades. Although this increase in overweight and obesity is thought to be mainly due to environmental changes, i.e., sedentary lifestyles and high caloric diets, consistent evidence from twin studies demonstrates high heritability and the importance of genetic differences for normal variation in BMI. We analysed self-reported data on BMI from approximately 37,000 complete twin pairs (including opposite sex pairs) aged 20-29 and 30-39 from eight different twin registries participating in the GenomEUtwin project. Quantitative genetic analyses were conducted and sex differences were explored. Variation in BMI was greater for women than for men, and in both sexes was primarily explained by additive genetic variance in all countries. Sex differences in the variance components were consistently significant. Results from analyses of opposite sex pairs also showed evidence of sex-specific genetic effects suggesting there may be some differences between men and women in the genetic factors that influence variation in BMI. These results encourage the continued search for genes of importance to the body composition and the development of obesity. Furthermore, they suggest that strategies to identify predisposing genes may benefit from taking into account potential sex specific effects.

Heritability of adult body height: A comparative study of twin cohorts in eight countries

A major component of variation in body height is due to genetic differences, but environmental factors have a substantial contributory effect. In this study we aimed to analyse whether the genetic architecture of body height varies between affluent western societies. We analysed twin data from eight countries comprising 30,111 complete twin pairs by using the univariate genetic model of the Mx statistical package. Body height and zygosity were self-reported in seven populations and measured directly in one population. We found that there was substantial variation in mean body height between countries; body height was least in Italy (177 cm in men and 163 cm in women) and greatest in the Netherlands (184 cm and 171 cm, respectively). In men there was no corresponding variation in heritability of body height, heritability estimates ranging from 0.87 to 0.93 in populations under an additive genes/unique environment (AE) model. Among women the heritability estimates were generally lower than among men with greater variation between countries, ranging from 0.68 to 0.84 when an additive genes/shared environment/unique environment (ACE) model was used. In four populations where an AE model fit equally well or better, heritability ranged from 0.89 to 0.93. This difference between the sexes was mainly due to the effect of the shared environmental component of variance, which appears to be more important among women than among men in our study populations. Our results indicate that, in general, there are only minor differences in the genetic architecture of height between affluent Caucasian populations, especially among men.

Relative importance of female-specific and non-female-specific effects on variation in iron stores between women

Women have lower iron stores than men because of iron loss during their reproductive years. However, variation between women could result from differences in iron loss, aspects of iron homeostasis common to men and women, or a combination of both. We compared the effects of age, menopause, menstrual blood loss and the number of pregnancies (sex-specific factors), and the effects of genetic variation, on markers of iron stores. We assessed how much the same genes or other familial factors influence iron status in both men and women. Data from 2039 female twins who participated in studies of reproductive health and iron status were used to estimate the proportions of variation that could be ascribed to genes, environment and measured factors. Significant effects of age, menopausal status and magnitude of menstrual blood loss were demonstrated, accounting for up to 18% of variance in serum ferritin in this sample, but number of children had no significant effect. Genetic effects were more than twice as great as sex-specific effects. The within-pair similarity of ferritin values in dizygotic female twin pairs was greater than for dizygotic opposite-sex pairs, but this difference was not quite significant, consistent with a minor role for sex-specific factors; and the opposite-sex within-pair differences did not diminish significantly with age. We conclude that the contribution of genetic differences between women to variation in iron stores outweighs the comparatively small effects of interindividual variation in iron loss through variation in menstruation and number of pregnancies.

Evidence for a QTL on chromosome 19 influencing LDL cholesterol levels in the general population

The genetic basis of cardiovascular disease (CVD) with its complex etiology is still largely elusive. Plasma levels of lipids and apolipoproteins are among the major quantitative risk factors for CVD and are well-established intermediate traits that may be more accessible to genetic dissection than clinical CVD end points. Chromosome 19 harbors multiple genes that have been suggested to play a role in lipid metabolism and previous studies indicated the presence of a quantitative trait locus (QTL) for cholesterol levels in genetic isolates. To establish the relevance of genetic variation at chromosome 19 for plasma levels of lipids and apolipoproteins in the general, out-bred Caucasian population, we performed a linkage study in four independent samples, including adolescent Dutch twins and adult Dutch, Swedish and Australian twins totaling 493 dizygotic twin pairs. The average spacing of short-tandem-repeat markers was 6 - 8 cM. In the three adult twin samples, we found consistent evidence for linkage of chromosome 19 with LDL cholesterol levels ( maximum LOD scores of 4.5, 1.7 and 2.1 in the Dutch, Swedish and Australian sample, respectively); no indication for linkage was observed in the adolescent Dutch twin sample. The QTL effects in the three adult samples were not significantly different and a simultaneous analysis of the samples increased the maximum LOD score to 5.7 at 60 cM pter. Bivariate analyses indicated that the putative LDL-C QTL also contributed to the variance in ApoB levels, consistent with the high genetic correlation between these phenotypes. Our study provides strong evidence for the presence of a QTL on chromosome 19 with a major effect on LDL-C plasma levels in outbred Caucasian populations.

Genetic variation in foliar carbon isotope composition in relation to tree growth and foliar nitrogen concentration in clones of the F-1 hybrid between slash pine and Caribbean pine

The objectives of this study were: (1) to quantify the genetic variation in foliar carbon isotope composition (delta(13)C) of 122 clones of ca. 4-year-old F-1 hybrids between slash pine (Pinus elliottii Engelm var. elliottii) and Caribbean pine (Pinus caribaea var. hondurensis Barr.,et Golf.) grown at two field experimental sites with different water and nitrogen availability in southeast Queensland, Australia, in relation to tree growth and foliar nitrogen concentration (N-mass); and (2) to assess the potential of using delta(13)C measurements, in the foliage materials collected from the clone hedges at nursery and the 4-year-old tree canopies in the field, as an indirect index of tree water use efficiency for selecting elite F-1 hybrid pine clones with improved tree growth. There were significant differences in foliar delta(13)C between the nursery hedges and the 4-year-old tree canopies in the field, between the summer and winter seasons, between the two experimental sites, and between the upper outer and lower outer canopy positions sampled. This indicates that delta(13)C measurements in the foliage materials are significantly influenced by the sampling techniques and environmental conditions. Significant differences in foliar delta(13)C, at the upper outer canopy in both field experiments in summer and winter, were detected between the clones, and between the female parents of the clones. Clone means of tree height at age ca. 3 years were positively related to those of the upper outer canopy delta(13)C at both experimental sites in winter, but only for the wetter site in summer. There were positive, linear relationships between clone means of canopy delta(13)C and those of canopy N-mass, indicating that canopy photosynthetic capacity might be an important factor regulating the clonal variation in canopy delta(13)C. Significant correlations were found between clone means of canopy delta(13)C at both experimental sites in summer and winter, and between those at the upper outer and lower outer canopy positions. Mean clone delta(13)C for the nursery hedges was only positively related to mean clone stem diameter at 1.3 m height at age 3 years on the wetter site. The clone by site interaction for foliar delta(13)C at the upper outer canopy was significant only in summer. Overall, the relatively high genetic variance components for foliar delta(13)C and significant, positive correlations between clone means of foliar delta(13)C and tree growth have highlighted the potential of using foliar delta(13)C measurements for assisting in selection of the elite F-1 hybrid pine clones with improved tree growth. (C) 2002 Elsevier Science B.V. All rights reserved.

Reproducibility of a laboratory-based 40-km cycle time-trial on a stationary wind-trainer in highly trained cyclists

The purpose of the present study was to examine the reproducibility of laboratory-based 40-km cycle time-trial performance on a stationary wind-trainer. Each week, for three consecutive weeks, and on different days, forty-three highly trained male cyclists ((x) over bar +/- SD; age = 25 +/- 6 y; mass = 75 +/- 7 kg; peak oxygen uptake [(V) over dot O-2 peak] = 64.8 +/- 5.2 ml x kg(-1) x min(-1)) performed: 1) a (V) over dot O-2 peak test, and 2) a 40-km time-trial on their own racing bicycle mounted to a stationary wind-trainer (Cateye - Cyclosimulator). Data from all tests were compared using a one-way analysis of variance. Performance on the second and third 40-km time-trials were highly related (r = 0.96; p < 0.001), not significantly different (57:21 +/- 2:57 vs. 57:12 +/- 3:14 min:s), and displayed a low coefficient of variation (CV) = 0.9 +/- 0.7%. Although the first 40-km time-trial (58:43 +/- 3:17min:s) was not significantly different from the second and third tests (p = 0.06), inclusion of the first test in the assessment of reliability increased within-subject CV to 3.0 +/- 2.9%. 40-km time-trial speed (km x h(-1)) was significantly (p < 0.001) related to peak power output (W; r = 0.75), (V) over dot O-2 peak (1 x min(-1); r = 0.53), and the second ventilatory turnpoint (1 x min(-1); r = 0.68) measured during the progressive exercise tests. These data demonstrate that the assessment of 40-km cycle time-trial performance in well-trained endurance cyclists on a stationary wind-trainer is reproducible, provided the athletes perform a familiarization trial.

Poor correlation of mid-femoral measurements by CT and hip measurements by DXA in the elderly

Background and aims: Hip fracture is a devastating event in terms of outcome in the elderly, and the best predictor of hip fracture risk is hip bone density, usually measured by dual X-ray absorptiometry (DXA). However, bone density can also be ascertained from computerized tomography (CT) scans, and mid-thigh scans are frequently employed to assess the muscle and fat composition of the lower limb. Therefore, we examined if it was possible to predict hip bone density using mid-femoral bone density. Methods: Subjects were 803 ambulatory white and black women and men, aged 70-79 years, participating in the Health, Aging and Body Composition (Health ABC) Study. Bone mineral content (BMC, g) and volumetric bone mineral density (vBMD, mg/cm(3)) of the mid-femur were obtained by CT, whereas BMC and areal bone mineral density (aBMD, g/cm(2)) of the hip (femoral neck and trochanter) were derived from DXA. Results: In regression analyses stratified by race and sex, the coefficient of determination was low with mid-femoral BMC, explaining 6-27% of the variance in hip BMC, with a standard error of estimate (SEE) ranging from 16 to 22% of the mean. For mid-femur vBMD, the variance explained in hip aBMD was 2-17% with a SEE ranging from 15 to 18%. Adjusting aBMD to approximate volumetric density did not improve the relationships. In addition, the utility of fracture prediction was examined. Forty-eight subjects had one or more fractures (various sites) during a mean follow-up of 4.07 years. In logistic regression analysis, there was no association between mid-femoral vBMD and fracture (all fractures), whereas a 1 SD increase in hip BMD was associated with reduced odds for fracture of similar to60%. Conclusions: These results do not support the use of CT-derived mid-femoral vBMD or BMC to predict DXA-measured hip bone mineral status, irrespective of race or sex in older adults. Further, in contrast to femoral neck and trochanter BMD, mid-femur vBMD was not able to predict fracture (all fractures). (C) 2003, Editrice Kurtis.

Thermomechanical environment characterisation in injection moulding and its relation to the mechanical properties of talc-filled polypropylene

This study is focused on the establishment of relationships between the injection moulding processing conditions, the applied thermomechanical environment (TME) and the tensile properties of talc-filled polypropylene,adopting a new extended concept of thermomechanical indices (TMI). In this approach, TMI are calculated from computational simulations of the moulding process that characterise the TME during processing, which are then related to the mechanical properties of the mouldings. In this study, this concept is extended to both the filling and the packing phases, with new TMI defined related to the morphology developed during these phases. A design of experiments approach based on Taguchi orthogonal arrays was adopted to vary the injection moulding parameters (injection flow rate, injection temperature, mould wall temperature and holding pressure), and thus, the TME. Results from analysis of variance for injection-moulded tensile specimens have shown that among the considered processing conditions, the flow rate is the most significant parameter for the Young’s modulus; the flow rate and melt temperature are the most significant for the strain at break; and the holding pressure and flow rate are the most significant for the stress at yield. The yield stress and Young’s modulus were found to be governed mostly by the thermostress index (TSI, related to the orientation of the skin layer), whilst the strain at break depends on both the TSI and the cooling index (CI, associated to the crystallinity degree of the core region). The proposed TMI approach provides predictive capabilities of the mechanical response of injection-moulded components, which is a valuable input during their design stage.

Simultaneous selection in progenies of yellow passion fruit using selection indices

This study aimed to evaluate the efficiency of simultaneous selection (selection indices) using estimated genetic gains in yellow passion fruit and to make a comparison between the methodologies of Mulamba & Mock and Elston. The study was conducted with 26 sib progenies of yellow passion fruit for intrinsic production characteristics including fruit number, fruit mass, fruit length and diameter, and for the fruit characteristics skin thickness, soluble solids and acidity. Two methodologies were applied: first, in the joint analysis of fruit characteristics and of intrinsic production characteristics in a single phase of selection; and second, in the analysis in two phases, in which priority was given to the intrinsic production characteristics in the first phase, and later, in the second phase, the best fruit characteristics were chosen among the progenies of the first phase. The analysis of variance was applied to the data to detect genetic variability among progenies. The Elston's selection indice was unable to provide distribution of genetic gains consistent with the purposes of the study, as it selected a single progeny of passion fruit. However, the index based on the sum of ranks of Mulamba & Mock was more suitable, as it provided a balanced distribution of gains, selecting a larger number of progenies. The methodology of selection using indices is advantageous in passion fruit, since it contributes to higher genetic gains for all the traits evaluated, and the selection in a single phase was proved efficient for progeny selection.

Adventitious rooting in cuttings of croton and hibiscus in response to indolbutyric acid and humic acid

Adventitious rooting of ornamental plants can be accelerated by the application of growth regulators, such as auxin. Humic acids, organic matter in soil and organic compounds also have a biostimulant effect. This work evaluated the rooting in cuttings of croton (Codianeum variegatum L. Rumph) and hibiscus (Hibiscus rosa-sinensis L) in response to the application of different concentrations of indolbutyric acid (IBA) and humic acid (HA). The experiment was carried out in a greenhouse. Apical stem cuttings were treated with solutions at concentrations of: 0, 250, 500, 1000, 2000 mg L-1 IBA and 0, 10, 20, 30, 40 mmol L-1 HA carbon isolated from vermicomposting. Forty-five days after the applications, the cuttings were removed from the pots containing carbonized rice hull and the following variables were measured: rooting number, length and width of leaves, fresh and dry matter of root and aerial part and root area. The results were subjected to analysis of variance and the qualitative and quantitative effects of the treatments were compared by contrast and regression, respectively. Regression equations were used to determine the maximum efficiency level of root dry matter according to IBA and HA. Higher accumulation of root dry matter was recorded for the treatments with the doses 579 mg L-1 IBA and 14 mmol L-1 HA and 970 mg L-1 IBA and 50 mmol L-1 HA for root cuttings of croton and hibiscus, respectively. It was found that the application of eiher IBA or HA at the indicated doses accelerates rooting in cuttings of croton and hibiscus and contributes to the formation of vigorous plants.

The host-tourist interaction in a world heritage site: the case of Guimarães

Guimarães, in the northwest of Portugal, is a city of strong symbolic and cultural significance and its nomination by UNESCO as world heritage, in 2001, enlarged its tourism potential. In this paper we present a few results of a survey that envisaged capturing the Guimarães residents’ perceptions of tourism impacts and their attitudes towards tourists. Specifically, one analyzes the type of relationship that exists between some socio-demographic groups and the perceived tourism impacts, as well as their socio-characteristics and the existing level of interaction between residents and tourists. The survey was implemented between January and March 2010 to a convenience sample of 540 inhabitants of the municipality of Guimarães resulting in 400 questionnaires with complete data. For this, we made use of various statistical techniques. Using a factorial analysis, we can conclude that the three factors used explain 52.3% of the variance contained in the original variables obtained from the survey. By another side, using a logit model in the analysis and taking as the dependent variable the frequent or very frequent contact with tourists, we found that only the variables referred to perceived positive impacts of tourism, education and the place of residence in urban areas have shown to be statistically significant. We are aware of the multiple ways the issue of residents’ perceptions and attitudes towards tourism can be approached and of the difficulties to get useful policy-oriented insights. This paper is a step in that trail.

Methods to classify maize cultivars in use efficiency and response to nitrogen

n plant breeding programs that aim to obtain cultivars with nitrogen (N) use efficiency, the focus is on methods of selection and experimental procedures that present low cost, fast response, high repeatability, and can be applied to a large number of cultivars. Thus, the objectives of this study were to classify maize cultivars regarding their use efficiency and response to N in a breeding program, and to validate the methodology with contrasting doses of the nutrient. The experimental design was a randomized block with the treatments arranged in a split-plot scheme with three replicates and five N doses (0, 30, 60, 120 and 200 kg ha-1) in the plots, and six cultivars in subplots. We compared a method examining the efficiency and response (ER) with two contrasting doses of N. After that, the analysis of variance, mean comparison and regression analysis were performed. In conclusion, the method of the use efficiency and response based on two N levels classifies the cultivars in the same way as the regression analysis, and it is appropriate in plant breeding routine. Thus, it is necessary to identify the levels of N required to discriminate maize cultivars in conditions of low and high N availability in plant breeding programs that aim to obtain efficient and responsive cultivars. Moreover, the analysis of the interaction genotype x environment at experiments with contrasting doses is always required, even when the interaction is not significant.

Loneliness in Middle and Old Age

Purpose of the research: (a) To identify the degree of much loneliness reported in the Portuguese population over 50 years of age and (b) test whether loneliness can be predicted by socio-demographic, health related or social characteristic of the sample other than age. Materials and methods: 1174 late middle age and older adults were interviewed face to face by different interviewers across the country; after the informed consent was signed, we asked the participants several socio-demographic and health-related questions; finally we asked ‘‘How often do you feel lonely?’’ and participants responded according to a five point Likert scale. Principal results: The results showed that 12% of participants reporting feeling lonely often or always, whereas 40% reporting never feeling lonely. The remaining 48% self-reported they felt lonely seldom or sometimes. Additionally, results show that, when taken together, variables such as marital status, type of housing, residence settings, health conditions, social satisfaction, social isolation, lack of interest, transportation, and age were predictors of loneliness. Major conclusions: (1) The association of loneliness with advanced age has been greatly exaggerated by mass media and common sense; (2) But although our findings did not confirm the most alarmist views, the 12% of older adults reporting that they are feeling lonely always or often should be cause for attention and concern. It is necessary to understand the meaning, reasons and level of suffering implied on those feelings of loneliness. (3) Our findings suggest that it makes no sense to construe age as a singular feature or cause for feelings of loneliness. Instead, age and also a number of other features combine to predict feelings of loneliness. But even with our predictor variables there was a substantial of variance left unexplained. Therefore it is necessary to continue exploring how feelings of loneliness arise from the experience of living and how they can be changed.

Organisational and professional commitments: the influence in nurses´organizational citizenship behaviours

The way an employee behaves in his work can be influenced by the organisational and professional commitment. Nurses are professionals who are guided by organisational and professional goals and values. Among nurses, professional commitment may be an important antecedent of organisational citizenship behaviours. The study shows how organisational and professional commitment is related with nurses’ organisational citizenship behaviours. Data from a sample of 420 nurses working in two hospitals --- the Hospital of St. Marcos, Braga and the Hospital Centre of Alto Ave, Guimarães and Fafe units were collected. The main findings are as follows: (a) organisational commitment and professional commitment contribute to the explanation of nurses’ organisational citizenship behaviours, (b) affective organisational commitment, continuance organisational commitment --- personal sacrifice, affective professional commitment and continuance professional commitment explain 28.6% of variance of organisational citizenship behaviours. © 2013 Instituto Politécnico do Cávado e do Ave (IPCA). Published by Elsevier España, S.L.U. All rights reserved.