Impact des coupes partielles sur l’activité de coléoptères phloeophages et xylophages en forêt boréale

Ce projet de recherche évalue la réponse à court terme de coléoptères phloeophages et xylophages (Cerambycidae et Scolytinae) à différentes intensités de coupes partielles (0, 25 et 40% de la surface terrière prélevée) afin de déterminer la viabilité de cette méthode sylvicole en forêt boréale. Disposant de 12 parcelles expérimentales (4 répétitions pour chaque intensité de coupe) dans une sapinière à bouleau blanc située au sud de la forêt boréale (Québec, Canada), nous avons évalué l’abondance, la diversité ainsi que l’établissement (taux d’attaque) de ces deux groupes d’insectes, et ce dès la première année suivant la coupe. L’échantillonnage a été réalisé à l’aide de pièges à interception multidirectionnelle et de l’écorçage de sections de 3 espèces d’arbres exposées dans l’ensemble des parcelles. Nos résultats montrent une plus grande activité/abondance des deux taxons (abondance 5 à 6 fois plus élevée) ainsi qu’une composition en espèces différente et plus diversifiée dans les peuplements partiellement coupés (25 et 40%). De plus, la présence et la distribution d’espèces colonisant habituellement des hôtes affaiblis (e.g., Trypodendron lineatum, Rhagium inquisitor) – et pouvant donc réduire la valeur économique d’arbres résiduels – a été recensée et semble être favorisée entres autres par l’ouverture de la canopée et des blessures physiques faites aux arbres pendant les opérations sylvicoles. Par ailleurs, l’approche combinant différentes techniques d’échantillonnage a permis une meilleure compréhension des mécanismes de localisation/sélection d’hôte (variant en fonction de l’espèce), un aspect important de la dynamique des insectes pour l’évaluation des risques suite aux coupes forestières. Sur la base de cette étude à court terme, il ne semblerait pas y avoir de différence significative sur les risques pour le milieu quant à l’augmentation d’activité des Cerambycidae et Scolytinae entre les deux traitements de coupe appliqués. Il reste cependant indispensable de vérifier la validité de ces résultats sur une plus longue période afin d’établir des plans d’aménagement forestier durables pour la forêt boréale.

Aspekte des Prozesses der N-Freisetzung aus Humus-Vorratsabbau

In der vorliegenden Arbeit werden die Auswirkungen von Umweltveränderungen in einem N-gesättigten Buchenwaldökosystem über Basalt (Braunerde) untersucht. Unter veränderten Umweltbedingungen sind hier vor allem Bestandesdachauflösung, immissions- oder waldbaulich bedingt, und Klimaveränderung zu verstehen, die eine Erwärmung des Oberbodens zur Folge haben. Die Änderungen der Umweltbedingungen werden in diesem Versuchsansatz durch einen waldbaulichen Eingriff simuliert, durch den eine Bestandeslücke entsteht, die in einer Erwärmung des Bodens resultieren und damit den Wasser- und Elementhaushalt insgesamt beeinflussen. Es wird deutlich, dass die in der vorliegenden Arbeit untersuchten Flächen als N-gesättigt bezeichnet werden können, da die N-Verluste aus dem System die Größe der Einträge überschreiten. In der Folge ist es zu einer Entkopplung des Stoffhaushalts und damit zu erhöhter N-Mobilisierung gekommen. Diese konnte vor allem im hydrologischen Jahr 1996 dokumentiert werden; der Überschuss-N-Output liegt auf der Auflichtungsfläche bei bis zu 50 kg N/(ha*a)! Die beobachteten hohen N-Austräge erfolgten trotz eines ebenfalls beobachteten Anwachsens des mikrobiellen Stickstoff-Pools und des Aufwachsens einer krautigen und strauchigen Vegetation auf der Auflichtungsfläche. Im Jahresgang konnten auf der Auflichtungsfläche in 0 - 30 cm Bodentiefe maximale Änderungen im Nmic-Vorrat von 130 kg N/(ha*a) beobachtet werden. Das im Frühjahr beginnende quantitative Anwachsen des mikrobiellen Stickstoff-Pools mit dem Jahresgang zeigt vor allem dessen Temperaturabhängigkeit auf. Die am Ende der Vegetationsperiode deutlich ansteigenden Austragsraten zeigen jedoch an, dass der freigesetzte Stickstoff auch von den Mikroorganismen nicht dauerhaft im System gehalten werden kann, da mit fallender Temperatur auch die Mikroorganismen absterben und der in ihrer Biomasse gespeicherte Stickstoff freigesetzt wird. Aufwachsende Vegetation auf der Auflichtungsfläche konnte einen Großteil des Netto-Stickstoff-Jahreseintrages aufnehmen. Da die "Netto-Jahres-Mineralisation" 1996 leicht über der Wurzelaufnahme liegt, verbleibt ein Rest, der nicht von der aufwachsenden krautigen Vegetation der Auflichtungsfläche aufgenommen werden kann. Ergebnis ist damit, dass die auf Lochhieben aufwachsende krautige und strauchige Vegetation eine temperaturbedingte Stickstoffmobilisierung nur teilweise kompensieren kann. Allein aufwachsende verholzende Vegetation kann Stickstoff langfristig im System binden.

Use of digital camera to assess nitrogen status of winter wheat in the Northern China Plain

The most widely used methods to assess the nitrogen (N) status of winter wheat (Triticum aestivum L.) are the determination of plant total N by combustion, the testing of nitrate in the leaf tissue and the use of SPAD readings. However, due to their labor requirements or high costs these methods can hardly be applied to the huge wheat growing areas of the Northern China Plain. This study therefore examined an alternative method to measure the N status of wheat by using a digital camera to record the visible green light reflected from the plant canopy. The experiment was conducted near Beijing in a multi-factorial field trial with three levels of N. The intensity of green light reflected from the wheat canopy was compared to the total N concentration, to the nitrate concentration of the basal stem, and to the SPAD readings of leaves. The results show significant inverse relationships between greenness intensity, canopy total N, and SPAD readings at booting and flowering. At booting, sap nitrate <2000mgL^-1 was inversely related to greenness intensity and to sap nitrate concentration in the basal stem. At sap nitrate ~2000mgL^-1, the greenness intensity reached a plateau. At booting and flowering, significant inverse relationships between greenness intensity and shoot biomass were found. The results show the potential of the new method to assess the N status of winter wheat.

Determination of yield and quality parameters of energy crops applying laboratory and field spectroscopy

A real-time analysis of renewable energy sources, such as arable crops, is of great importance with regard to an optimised process management, since aspects of ecology and biodiversity are considered in crop production in order to provide a sustainable energy supply by biomass. This study was undertaken to explore the potential of spectroscopic measurement procedures for the prediction of potassium (K), chloride (Cl), and phosphate (P), of dry matter (DM) yield, metabolisable energy (ME), ash and crude fibre contents (ash, CF), crude lipid (EE), nitrate free extracts (NfE) as well as of crude protein (CP) and nitrogen (N), respectively in pretreated samples and undisturbed crops. Three experiments were conducted, one in a laboratory using near infrared reflectance spectroscopy (NIRS) and two field spectroscopic experiments. Laboratory NIRS measurements were conducted to evaluate to what extent a prediction of quality parameters is possible examining press cakes characterised by a wide heterogeneity of their parent material. 210 samples were analysed subsequent to a mechanical dehydration using a screw press. Press cakes serve as solid fuel for thermal conversion. Field spectroscopic measurements were carried out with regard to further technical development using different field grown crops. A one year lasting experiment over a binary mixture of grass and red clover examined the impact of different degrees of sky cover on prediction accuracies of distinct plant parameters. Furthermore, an artificial light source was used in order to evaluate to what extent such a light source is able to minimise cloud effects on prediction accuracies. A three years lasting experiment with maize was conducted in order to evaluate the potential of off-nadir measurements inside a canopy to predict different quality parameters in total biomass and DM yield using one sensor for a potential on-the-go application. This approach implements a measurement of the plants in 50 cm segments, since a sensor adjusted sideways is not able to record the entire plant height. Calibration results obtained by nadir top-of-canopy reflectance measurements were compared to calibration results obtained by off-nadir measurements. Results of all experiments approve the applicability of spectroscopic measurements for the prediction of distinct biophysical and biochemical parameters in the laboratory and under field conditions, respectively. The estimation of parameters could be conducted to a great extent with high accuracy. An enhanced basis of calibration for the laboratory study and the first field experiment (grass/clover-mixture) yields in improved robustness of calibration models and allows for an extended application of spectroscopic measurement techniques, even under varying conditions. Furthermore, off-nadir measurements inside a canopy yield in higher prediction accuracies, particularly for crops characterised by distinct height increment as observed for maize.

Sensorische Erfassung von Grünlandbiomassen als Grundlage für ein teilflächenspezifisches Management im Ökologischen Landbau

Vor dem Hintergund der Integration des wissensbasierten Managementsystems Precision Farming in den Ökologischen Landbau wurde die Umsetzung bestehender sowie neu zu entwickelnder Strategien evaluiert und diskutiert. Mit Blick auf eine im Precision Farming maßgebende kosteneffiziente Ertragserfassung der im Ökologischen Landbau flächenrelevanten Leguminosen-Grasgemenge wurden in zwei weiteren Beiträgen die Schätzgüten von Ultraschall- und Spektralsensorik in singulärer und kombinierter Anwendung analysiert. Das Ziel des Precision Farming, ein angepasstes Management bezogen auf die flächeninterne Variabilität der Standorte umzusetzen, und damit einer Reduzierung von Betriebsmitteln, Energie, Arbeit und Umwelteffekten bei gleichzeitiger Effektivitätssteigerung und einer ökonomischen Optimierung zu erreichen, deckt sich mit wesentlichen Bestrebungen im Ökogischen Landbau. Es sind vorrangig Maßnahmen zur Erfassung der Variabilität von Standortfaktoren wie Geländerelief, Bodenbeprobung und scheinbare elektrische Leitfähigkeit sowie der Ertragserfassung über Mähdrescher, die direkt im Ökologischen Landbau Anwendung finden können. Dagegen sind dynamisch angepasste Applikationen zur Düngung, im Pflanzenschutz und zur Beseitigung von Unkräutern aufgrund komplexer Interaktionen und eines eher passiven Charakters dieser Maßnahmen im Ökologischen Landbau nur bei Veränderung der Applikationsmodelle und unter Einbindung weiterer dynamischer Daten umsetzbar. Beispiele hiefür sind einzubeziehende Mineralisierungsprozesse im Boden und organischem Dünger bei der Düngemengenberechnung, schwer ortsspezifisch zuzuordnende präventive Maßnamen im Pflanzenschutz sowie Einflüsse auf bodenmikrobiologische Prozesse bei Hack- oder Striegelgängen. Die indirekten Regulationsmechanismen des Ökologischen Landbaus begrenzen daher die bisher eher auf eine direkte Wirkung ausgelegten dynamisch angepassten Applikationen des konventionellen Precision Farming. Ergänzend sind innovative neue Strategien denkbar, von denen die qualitätsbezogene Ernte, der Einsatz hochsensibler Sensoren zur Früherkennung von Pflanzenkrankheiten oder die gezielte teilflächen- und naturschutzorientierte Bewirtschaftung exemplarisch in der Arbeit vorgestellt werden. Für die häufig große Flächenanteile umfassenden Leguminosen-Grasgemenge wurden für eine kostengünstige und flexibel einsetzbare Ertragserfassung die Ultraschalldistanzmessung zur Charakterisierung der Bestandeshöhe sowie verschiedene spektrale Vegetationsindices als Schätzindikatoren analysiert. Die Vegetationsindices wurden aus hyperspektralen Daten nach publizierten Gleichungen errechnet sowie als „Normalized Difference Spectral Index“ (NDSI) stufenweise aus allen möglichen Wellenlängenkombinationen ermittelt. Die Analyse erfolgte für Ultraschall und Vegetationsindices in alleiniger und in kombinierter Anwendung, um mögliche kompensatorische Effekte zu nutzen. In alleiniger Anwendung erreichte die Ultraschallbestandeshöhe durchweg bessere Schätzgüten, als alle einzelnen Vegetationsindices. Bei den letztgenannten erreichten insbesondere auf Wasserabsorptionsbanden basierende Vegetationsindices eine höhere Schätzgenauigkeit als traditionelle Rot/Infrarot-Indices. Die Kombination beider Sensorda-ten ließ eine weitere Steigerung der Schätzgüte erkennen, insbesondere bei bestandesspezifischer Kalibration. Hierbei kompensieren die Vegetationsindices Fehlschätzungen der Höhenmessung bei diskontinuierlichen Bestandesdichtenänderungen entlang des Höhengradienten, wie sie beim Ährenschieben oder durch einzelne hochwachsende Arten verursacht werden. Die Kombination der Ultraschallbestandeshöhe mit Vegetationsindices weist das Potential zur Entwicklung kostengünstiger Ertragssensoren für Leguminosen-Grasgemenge auf. Weitere Untersuchungen mit hyperspektralen Vegetationsindices anderer Berechnungstrukturen sowie die Einbindung von mehr als zwei Wellenlängen sind hinsichtlich der Entwicklung höherer Schätzgüten notwendig. Ebenso gilt es, Kalibrierungen und Validationen der Sensorkombination im artenreichen Grasland durchzuführen. Die Ertragserfassung in den Leguminosen-Grasgemengen stellt einen wichtigen Beitrag zur Erstellung einer Ertragshistorie in den vielfältigen Fruchtfolgen des Ökologischen Landbaus dar und ermöglicht eine verbesserte Einschätzung von Produktionspotenzialen und Defizitarealen für ein standortangepasstes Management.

Effects of transformation processes in 'jubraka' agroforestry systems of the Nuba Mountains, Sudan, on plant diversity

Deutsche Forschungsgemeinschaft

Origin and Availability of Large Cavities for Barrow’s Goldeneye (Bucephala islandica), a Species at Risk Inhabiting the Eastern Canadian Boreal Forest

Large secondary-nesting birds such as ducks rely on appropriate cavities for breeding. The main objective of this study was to assess the availability of large cavities and the potential of a managed boreal coniferous landscape to provide nesting trees within the breeding area of the eastern population of Barrow’s Goldeneye (Bucephala islandica), a cavity-nesting species at risk in Canada. Woodpecker surveys were conducted in both conifer and mixed-wood landscapes, and cavities were sought in line transects distributed in unharvested and linear remnant stands of balsam fir (Abies balsamea) and black spruce (Picea mariana) as well as in cutblocks. No Pileated Woodpeckers (Dryocopus pileatus) were detected in the breeding area of Barrow’s Goldeneye, but the species was present in the nearby lowland area in which trembling aspen (Populus tremuloides) is abundant. Only 10 trees (0.2% of those sampled) supported cavities considered suitable for Barrow’s Goldeneye in terms of dimensions and canopy openness. Most of the suitable cavities found during this study were nonexcavated apical (chimney) cavities in relatively short snags that showed advanced states of decay. A diameter-at-breast-height threshold was determined for each tree species, after which the probability of cavity occurrence was enhanced in terms of potential cavity trees for Barrow’s Goldeneye. Remnant linear forest sites had lower potential tree densities than did their unharvested equivalents. Large cavities were thus a rare component in this boreal landscape, suggesting that they may be a limiting factor for this population at risk. Current even-aged forest management that mainly relies on clear-cut practices is likely to further reduce the potential of this landscape to provide trees with suitable cavities.

Do the Golden-winged Warbler and Blue-winged Warbler Exhibit Species-specific Differences in their Breeding Habitat Use?

We compared habitat features of Golden-winged Warbler (Vermivora chrysoptera) territories in the presence and absence of the Blue-winged Warbler (V. cyanoptera) on reclaimed coal mines in southeastern Kentucky, USA. Our objective was to determine whether there are species specific differences in habitat that can be manipulated to encourage population persistence of the Golden-winged Warbler. When compared with Blue-winged Warblers, Golden-winged Warblers established territories at higher elevations and with greater percentages of grass and canopy cover. Mean territory size (minimum convex polygon) was 1.3 ha (se = 0.1) for Golden-winged Warbler in absence of Blue-winged Warbler, 1.7 ha (se = 0.3) for Golden-winged Warbler coexisting with Blue-winged Warbler, and 2.1 ha (se = 0.3) for Blue-winged Warbler. Territory overlap occurred within and between species (18 of n = 73 territories, 24.7%). All Golden-winged and Blue-winged Warblers established territories that included an edge between reclaimed mine land and mature forest, as opposed to establishing territories in open grassland/shrubland habitat. The mean distance territories extended from a forest edge was 28.0 m (se = 3.8) for Golden-winged Warbler in absence of Blue-winged Warbler, 44.7 m (se = 5.7) for Golden-winged Warbler coexisting with Blue-winged Warbler, and 33.1 m (se = 6.1) for Blue-winged Warbler. Neither territory size nor distances to forest edges differed significantly between Golden-winged Warbler in presence or absence of Blue-winged Warbler. According to Monte Carlo analyses, orchardgrass (Dactylis glomerata), green ash (Fraxinus pennsylvanica) seedlings and saplings, and black locust (Robinia pseudoacacia) saplings were indicative of sites with only Golden-winged Warblers. Sericea lespedeza, goldenrod (Solidago spp.), clematis vine (Clematis spp.), and blackberry (Rubus spp.) were indicative of sites where both species occurred. Our findings complement recent genetic studies and add another factor for examining Golden-winged Warbler population decline. Further, information from our study will aid land managers in manipulating habitat for the Golden-winged Warbler.

Patch Scale Nest-Site Selection by Marbled Murrelets (Brachyramphus marmoratus)

The Marbled Murrelet (Brachyramphus marmoratus) is a threatened alcid that nests almost exclusively in old-growth forests along the Pacific coast of North America. Nesting habitat has significant economic importance. Murrelet nests are extremely difficult and costly to find, which adds uncertainty to management and conservation planning. Models based on air photo interpretation of forest cover maps or assessments by low-level helicopter flights are currently used to rank presumed Marbled Murrelet nesting habitat quality in British Columbia. These rankings are assumed to correlate with nest usage and murrelet breeding productivity. Our goal was to find the models that best predict Marbled Murrelet nesting habitat in the ground-accessible portion of the two regions studied. We generated Resource Selection Functions (RSF) using logistic regression models of ground-based forest stand variables gathered at plots around 64 nests, located using radio-telemetry, versus 82 random habitat plots. The RSF scores are proportional to the probability of nests occurring in a forest patch. The best models differed somewhat between the two regions, but include both ground variables at the patch scale (0.2-2.0 ha), such as platform tree density, height and trunk diameter of canopy trees and canopy complexity, and landscape scale variables such as elevation, aspect, and slope. Collecting ground-based habitat selection data would not be cost-effective for widespread use in forestry management; air photo interpretation and low-level aerial surveys are much more efficient methods for ranking habitat suitability on a landscape scale. This study provides one method for ground-truthing the remote methods, an essential step made possible using the numerical RSF scores generated herein.

Investigating Targets of Avian Habitat Management to Eliminate an Ecological Trap

Ecological traps are attractive population sinks created when anthropogenic habitat alteration inadvertently creates a mismatch between the attractiveness of a habitat based upon its settlement cues, and its current value for survival or reproduction. Traps represent a new threat to the conservation of native species, yet little attention has been given to developing practical approaches to eliminating them. In the northern Rocky Mountains of Montana, Olive-sided Flycatchers (Contopus cooperi) prefer to settle in patches of selectively harvested forest versus burned forest despite the lower reproductive success and higher nest predation risk associated with the former habitat. I investigated characteristics of preferred perch sites for this species and how these preferences varied between habitats and sexes. I then built on previous research to develop a range of management prescriptions for reducing the attractiveness of selectively harvested forest, thereby disarming the ecological trap. Female flycatchers preferred to forage from shorter perch trees than males, and females’ perches were shorter than other available perch trees. Both sexes preferred standing dead perch trees (snags) and these preferences were most obvious in harvested forest where snags are rarer. Because previous research shows that snag density is linked to habitat preference and spruce/fir trees are preferred nest substrate, my results suggest these two habitat components are focal habitat selection cues. I suggest alternative and complementary strategies for eliminating the ecological trap for Olive-sided Flycatchers including: (1) reduced retention and creation of snags, (2) avoiding selective harvest in spruce, fir, and larch stands, (3) avoiding retention of these tree species, and (4) selecting only even-aged canopy height trees for retention so as to reduce perch availability for female flycatchers. Because these strategies also have potential to negatively impact habitat suitability for other forest species or even create new ecological traps, we urge caution in the application of our management recommendations.

Ovenbird (Seiurus aurocapilla) Territory Placement Near Seismic Lines is Influenced by Forest Regeneration and Conspecific Density

The boreal forest of western Canada is being dissected by seismic lines used for oil and gas exploration. The vast amount of edge being created is leading to concerns that core habitat will be reduced for forest interior species for extended periods of time. The Ovenbird (Seiurus aurocapilla) is a boreal songbird known to be sensitive to newly created seismic lines because it does not include newly cut lines within its territory. We examined multiple hypotheses to explain potential mechanisms causing this behavior by mapping Ovenbird territories near lines with varying states of vegetation regeneration. The best model to explain line exclusion behavior included the number of neighboring conspecifics, the amount of bare ground, leaf-litter depth, and canopy closure. Ovenbirds exclude recently cut seismic lines from their territories because of lack of protective cover (lower tree and shrub cover) and because of reduced food resources due to large areas of bare ground. Food reduction and perceived predation risk effects seem to be mitigated once leaf litter (depth and extent of cover) and woody vegetation cover are restored to forest interior levels. However, as conspecific density increases, lines are more likely to be used as landmarks to demarcate territorial boundaries, even when woody vegetation cover and leaf litter are restored. This behavior can reduce territory density near seismic lines by changing the spatial distribution of territories. Landmark effects are longer lasting than the effects from reduced food or perceived predation risk because canopy height and tree density take >40 years to recover to forest interior levels. Mitigation of seismic line impacts on Ovenbirds should focus on restoring forest cover as quickly as possible after line cutting.

Shifts in resident bird communities associated with cloud forest patch size in Central Veracruz, Mexico

Avian communities in cloud forests have high levels of endemism and are at major risk given the accelerated rate of habitat fragmentation. Nevertheless, the response of these communities to changes in fragment size remains poorly understood. We evaluated species richness, bird community density, community composition, and dominance as indicators of the response to fragment size in a fragmented cloud forest landscape in central Veracruz, Mexico. Medium-sized fragments had statistically higher than expected species richness and more even communities, which may be a reflection of the intermediate disturbance hypothesis, in which medium-sized fragments are exploited by both forest and disturbance-associated species. Bird density also reached higher values in medium-sized fragments, which may indicate a carrying capacity in this habitat. However, large cloud forest fragments had a distinct taxonomic and functional composition, attributable to an increased number of understory insectivore species and canopy frugivores. By comparison, omnivorous species associated with human-altered habitats were more abundant in smaller fragments. Hence, although medium-sized cloud forest fragments had higher species richness and high bird density, large forest tracts maintained a distinct avian community composition, particularly of insectivorous and frugivorous species. Furthermore, the underlying response to fragmentation can only be properly addressed when contrasting several community attributes, such as richness, density, composition, and species dominance. Therefore, cloud forest conservation should aim to preserve the remaining large forest fragments to maintain comprehensive avian communities and avoid local extinctions.

Wind-tunnel modelling of dispersion from a scalar area source in urban-like roughness

A wind-tunnel study was conducted to investigate ventilation of scalars from urban-like geometries at neighbourhood scale by exploring two different geometries a uniform height roughness and a non-uniform height roughness, both with an equal plan and frontal density of λ p = λ f = 25%. In both configurations a sub-unit of the idealized urban surface was coated with a thin layer of naphthalene to represent area sources. The naphthalene sublimation method was used to measure directly total area-averaged transport of scalars out of the complex geometries. At the same time, naphthalene vapour concentrations controlled by the turbulent fluxes were detected using a fast Flame Ionisation Detection (FID) technique. This paper describes the novel use of a naphthalene coated surface as an area source in dispersion studies. Particular emphasis was also given to testing whether the concentration measurements were independent of Reynolds number. For low wind speeds, transfer from the naphthalene surface is determined by a combination of forced and natural convection. Compared with a propane point source release, a 25% higher free stream velocity was needed for the naphthalene area source to yield Reynolds-number-independent concentration fields. Ventilation transfer coefficients w T /U derived from the naphthalene sublimation method showed that, whilst there was enhanced vertical momentum exchange due to obstacle height variability, advection was reduced and dispersion from the source area was not enhanced. Thus, the height variability of a canopy is an important parameter when generalising urban dispersion. Fine resolution concentration measurements in the canopy showed the effect of height variability on dispersion at street scale. Rapid vertical transport in the wake of individual high-rise obstacles was found to generate elevated point-like sources. A Gaussian plume model was used to analyse differences in the downstream plumes. Intensified lateral and vertical plume spread and plume dilution with height was found for the non-uniform height roughness

Referencing of street-level flows measured during the DAPPLE 2004 campaign

Street-level mean flow and turbulence govern the dispersion of gases away from their sources in urban areas. A suitable reference measurement in the driving flow above the urban canopy is needed to both understand and model complex street-level flow for pollutant dispersion or emergency response purposes. In vegetation canopies, a reference at mean canopy height is often used, but it is unclear whether this is suitable for urban canopies. This paper presents an evaluation of the quality of reference measurements at both roof-top (height = H) and at height z = 9H = 190 m, and their ability to explain mean and turbulent variations of street-level flow. Fast response wind data were measured at street canyon and reference sites during the six-week long DAPPLE project field campaign in spring 2004, in central London, UK, and an averaging time of 10 min was used to distinguish recirculation-type mean flow patterns from turbulence. Flow distortion at each reference site was assessed by considering turbulence intensity and streamline deflection. Then each reference was used as the dependent variable in the model of Dobre et al. (2005) which decomposes street-level flow into channelling and recirculating components. The high reference explained more of the variability of the mean flow. Coupling of turbulent kinetic energy was also stronger between street-level and the high reference flow rather than the roof-top. This coupling was weaker when overnight flow was stratified, and turbulence was suppressed at the high reference site. However, such events were rare (<1% of data) over the six-week long period. The potential usefulness of a centralised, high reference site in London was thus demonstrated with application to emergency response and air quality modelling.