Multifunctional controller architecture for sold-state marx modulator based on FPGA

This paper proposes a multifunctional architecture to implement field-programmable gate array (FPGA) controllers for power converters and presents a prototype for a pulsed power generator based on a solid-state Marx topology. The massively parallel nature of reconfigurable hardware platforms provides very high processing power and fast response times allowing the implementation of many subsystems in the same device. The prototype includes the controller, a failure detection system, an interface with a safety/emergency subsystem, a graphical user interface, and a virtual oscilloscope to visualize the generated pulse waveforms, using a single FPGA. The proposed architecture employs a modular design that can be easily adapted to other power converter topologies.

Developing persuasive interfaces

MSCC Dissertation in Computer Engineering

Characterization and performance analysis of a VDFLL GNSS receiver architecture

A non-coherent vector delay/frequency-locked loop architecture for GNSS receivers is proposed. Two dynamics models are considered: PV (position and velocity) and PVA (position, velocity, and acceleration). In contrast with other vector architectures, the proposed approach does not require the estimation of signals amplitudes. Only coarse estimates of the carrier-to-noise ratios are necessary.

Board-level prototype validation: a built-in controller and extended BST architecture

Prototype validation is a major concern in modern electronic product design and development. Simulation, structural test, functional and timing debug are all forming parts of the validation process, although very often addressed as dissociated tasks. In this paper we describe an integrated approach to board-level prototype validation, based on a set of mandatory/optional BST instructions and a built-in controller for debug and test, that addresses the late mentioned tasks as inherent parts of a whole process

Physical layer aware network architecture for the future internet

In this article, physical layer awareness in access, core, and metro networks is addressed, and a Physical Layer Aware Network Architecture Framework for the Future Internet is presented and discussed, as proposed within the framework of the European ICT Project 4WARD. Current limitations and shortcomings of the Internet architecture are driving research trends at a global scale toward a novel, secure, and flexible architecture. This Future Internet architecture must allow for the co-existence and cooperation of multiple networks on common platforms, through the virtualization of network resources. Possible solutions embrace a full range of technologies, from fiber backbones to wireless access networks. The virtualization of physical networking resources will enhance the possibility of handling different profiles, while providing the impression of mutual isolation. This abstraction strategy implies the use of well elaborated mechanisms in order to deal with channel impairments and requirements, in both wireless (access) and optical (core) environments.

Sistema visual para Ground Truth de sistemas autónomos

Este trabalho visa contribuir para o desenvolvimento de um sistema de visão multi-câmara para determinação da localização, atitude e seguimento de múltiplos objectos, para ser utilizado na unidade de robótica do INESCTEC, e resulta da necessidade de ter informação externa exacta que sirva de referência no estudo, caracterização e desenvolvimento de algoritmos de localização, navegação e controlo de vários sistemas autónomos. Com base na caracterização dos veículos autónomos existentes na unidade de robótica do INESCTEC e na análise dos seus cenários de operação, foi efectuado o levantamento de requisitos para o sistema a desenvolver. Foram estudados os fundamentos teóricos, necessários ao desenvolvimento do sistema, em temas relacionados com visão computacional, métodos de estimação e associação de dados para problemas de seguimento de múltiplos objectos . Foi proposta uma arquitectura para o sistema global que endereça os vários requisitos identi cados, permitindo a utilização de múltiplas câmaras e suportando o seguimento de múltiplos objectos, com ou sem marcadores. Foram implementados e validados componentes da arquitectura proposta e integrados num sistema para validação, focando na localização e seguimento de múltiplos objectos com marcadores luminosos à base de Light-Emitting Diodes (LEDs). Nomeadamente, os módulos para a identi cação dos pontos de interesse na imagem, técnicas para agrupar os vários pontos de interesse de cada objecto e efectuar a correspondência das medidas obtidas pelas várias câmaras, método para a determinação da posição e atitude dos objectos, ltro para seguimento de múltiplos objectos. Foram realizados testes para validação e a nação do sistema implementado que demonstram que a solução encontrada vai de encontro aos requisitos, e foram identi cadas as linhas de trabalho para a continuação do desenvolvimento do sistema global.

Work-in-progress on a thin IEEE1451.0 - architecture to implement reconfigurable Weblab infrastructures

Institutions have been creating their own specific weblab infrastructures. Usually, they use distinct software and hardware architectures comprehending instruments and modules (I&M) able to be parameterized but difficult to be shared. These aspects are impairing their widespread in education, since collaboration between institutions, in developing and sharing resources, is still low. To handle both aspects, this paper proposes the adoption of the IEEE1451.0 Std. with FPGA technology for creating reconfigurable weblab infrastructures. It is suggested the adoption of an IEEE1451.0 infrastructure with compatible instruments, described in Hardware Description Languages (HDL), to be reconfigured in FPGA-based boards. Besides an overview of the IEEE1451.0 Std., this paper presents a solution currently under development which seeks to enable the reconfiguration and the remote control of weblab infrastructures using a set of IEEE1451.0 HTTP commands.

Plataforma web de informação automobilística

Esta dissertação enquadra-se no âmbito dos Sistemas de Informação, em concreto, no desenvolvimento de aplicações Web, como é o caso de um website. Com a utilização em larga escala dos meios tecnológicos tem-se verificado um crescimento exponencial dos mesmos, o que se traduz na facilidade com que podem ser encontradas na Internet diversos tipos de plataformas informáticas. Além disso, hoje em dia, uma grande parte das organizações possui o seu próprio sítio na Internet, onde procede à divulgação dos seus serviços e/ou produtos. Pretende-se com esta dissertação explorar estas novas tecnologias, nomeadamente, os diagramas UML - Unified Modeling Language e a concepção de bases de dados, e posteriormente desenvolver um website. Com o desenvolvimento deste website não se propõe a criação de uma nova tecnologia, mas o uso de diversas tecnologias em conjunto com recurso às ferramentas UML. Este encontra-se organizado em três fases principais: análise de requisitos, implementação e desenho das interfaces. Na análise de requisitos efectuou-se o levantamento dos objectivos propostos para o sistema e das necessidades/requisitos necessários à sua implementação, auxiliado essencialmente pelo Diagrama de Use Cases do sistema. Na fase de implementação foram elaborados os arquivos e directórios que formam a arquitectura lógica de acordo com os modelos descritos no Diagrama de Classes e no Diagrama de Entidade-Relação. Os requisitos identificados foram analisados e usados na composição das interfaces e sistema de navegação. Por fim, na fase de desenho das interfaces foram aperfeiçoadas as interfaces desenvolvidas, com base no conceito artístico e criativo do autor. Este aperfeiçoamento vai de encontro ao gosto pessoal e tem como objectivo elaborar uma interface que possa também agradar ao maior número possível de utilizadores. Este pode ser observado na maneira como se encontram distribuídas as ligações (links) entre páginas, nos títulos, nos cabeçalhos, nas cores e animações e no seu design em geral. Para o desenvolvimento do website foram utilizadas diferentes linguagens de programação, nomeadamente a HyperText Markup Language (HTML), a Page Hypertext Preprocessor (PHP) e Javascript. A HTML foi utilizada para a disposição de todo o conteúdo visível das páginas e para definição do layout das mesmas e a PHP para executar pequenos scripts que permitem interagir com as diferentes funcionalidades do site. A linguagem Javascript foi usada para definir o design das páginas e incluir alguns efeitos visuais nas mesmas. Para a construção das páginas que compõem o website foi utilizado o software Macromedia Dreamweaver, o que simplificou a sua implementação pela facilidade com que estas podem ser construídas. Para interacção com o sistema de gestão da base de dados, o MySQL, foi utilizada a aplicação phpMyAdmin, que simplifica o acesso à base de dados, permitindo definir, manipular e consultar os seus dados.

ESEIG Mobile: an m-learning approach in a superior school

In recent years, mobile learning has emerged as an educational approach to decrease the limitation of learning location and adapt the teaching-learning process to all type of students. However, the large number and variety of Web-enabled devices poses challenges for Web content creators who want to automatic get the delivery context and adapt the content to mobile devices. In this paper we study several approaches to adapt the learning content to mobile phones. We present an architecture for deliver uniform m-Learning content to students in a higher School. The system development is organized in two phases: firstly enabling the educational content to mobile devices and then adapting it to all the heterogeneous mobile platforms. With this approach, Web authors will not need to create specialized pages for each kind of device, since the content is automatically transformed to adapt to any mobile device capabilities from WAP to XHTML MP-compliant devices.

A new approach to assess defragmentation strategies in dynamically reconfigurable FPGAs

Fragmentation on dynamically reconfigurable FPGAs is a major obstacle to the efficient management of the logic space in reconfigurable systems. When resource allocation decisions have to be made at run-time a rearrangement may be necessary to release enough contiguous resources to implement incoming functions. The feasibility of run-time relocation depends on the processing time required to set up rearrangements. Moreover, the performance of the relocated functions should not be affected by this process or otherwise the whole system performance, and even its operation, may be at risk. Relocation should take into account not only specific functional issues, but also the FPGA architecture, since these two aspects are normally intertwined. A simple and fast method to assess performance degradation of a function during relocation and to speed up the defragmentation process, based on previous function labelling and on the application of the Euclidian distance concept, is proposed in this paper.

PETCHA: a Programming Exercises Teaching Assistant

This paper presents a tool called Petcha that acts as an automated Teaching Assistant in computer programming courses. The ultimate objective of Petcha is to increase the number of programming exercises effectively solved by students. Petcha meets this objective by helping both teachers to author programming exercises and students to solve them. It also coordinates a network of heterogeneous systems, integrating automatic program evaluators, learning management systems, learning object repositories and integrated programming environments. This paper presents the concept and the design of Petcha and sets this tool in a service oriented architecture for managing learning processes based on the automatic evaluation of programming exercises. The paper presents also a case study that validates the use of Petcha and of the proposed architecture.

Personalized public transportation information

Thesis to obtain the Master of Science Degree in Computer Science and Engineering

tlCell: a software transactional memory for the cell broadband engine architecture

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do Grau de Mestre em Engenharia Informática

An Intelligent Distributed System for Environmental Management

Environmental management is a complex task. The amount and heterogeneity of the data needed for an environmental decision making tool is overwhelming without adequate database systems and innovative methodologies. As far as data management, data interaction and data processing is concerned we here propose the use of a Geographical Information System (GIS) whilst for the decision making we suggest a Multi-Agent System (MAS) architecture. With the adoption of a GIS we hope to provide a complementary coexistence between heterogeneous data sets, a correct data structure, a good storage capacity and a friendly user’s interface. By choosing a distributed architecture such as a Multi-Agent System, where each agent is a semi-autonomous Expert System with the necessary skills to cooperate with the others in order to solve a given task, we hope to ensure a dynamic problem decomposition and to achieve a better performance compared with standard monolithical architectures. Finally, and in view of the partial, imprecise, and ever changing character of information available for decision making, Belief Revision capabilities are added to the system. Our aim is to present and discuss an intelligent environmental management system capable of suggesting the more appropriate land-use actions based on the existing spatial and non-spatial constraints.

Model morphisms (MoMo) to enable language independent information models and interoperable business networks

MSc. Dissertation presented at Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa to obtain the Master degree in Electrical and Computer Engineering