Photoluminescence from carbon nanotubes

We observed yellow colored light emission bands from multiwalled carbon nanotubes in photo-luminescence (PL) experiments. The light emission band features indicate that the PL bands are associated with the electronic properties inherent to the carbon nanotube (CNT) structures.

九寨沟核心景区湖泊硅藻的组成及其密度与环境因子的关系

九寨沟自然保护区地处四川盆地北部岷山山脉南段，属川西高原气候中的暖温带。保护区内分布着118 个串珠状排列的高山湖泊，核心景区共有湖泊20 个（组），集中在海拔2000 米到3000 米之间。水资源是九寨沟的灵魂，保护水生生态系统是九寨沟生态旅游可持续发展的立足之本。本研究以九寨沟湿地生物多样性保护项目为依托，于2007 年5 月～2008 年4 月对九寨沟核心景区湖泊水体硅藻植物进行调查，分析了其密度与环境因子的相互关系，旨在为九寨沟湖泊生态系统保护提供科学依据和基础资料。主要有以下几点结论： （1）九寨沟硅藻植物丰富，调查统计为2 纲6 目10 科35 属159 种（包括变种和变型），水体硅藻中真性浮游种类较少，着生种类多，羽纹纲的脆杆藻属、舟形藻属、桥弯藻属、异极藻属、曲壳藻属的种类最多，常为优势属组成湖泊硅藻群落，只在长海是小环藻属占绝对优势。 （2）九寨沟水体中硅藻细胞密度不大，多在4×104～30×104 个/L，长海最高，五花海最低。在年变化上，不同的湖泊水体中硅藻的生长高峰季节不尽相同，在夏季、秋末和冬末春初均有可能出现高密度。在空间上，整体看来密度与海拔有一定的正相关，但由于水温不是单一主导因素，密度受多种环境因子影响，在海拔梯度上呈现一定的波浪状变化。 （3）影响九寨沟湖泊水体硅藻细胞密度较重要的环境因子是海拔、水温和pH。硅藻细胞密度年变化幅度大的湖泊水体，年平均细胞密度大。因此，环境因素不太稳定的湖泊水体，更可能出现高的硅藻细胞密度。11 月份响应于水量剧烈的减少，细齿菱形藻大量出现在五彩池成为优势种群，造成水体硅藻细胞密度的大幅增加。 （4）九寨沟湖泊水体水质几乎达到国家地表水I 类标准，但是，硅藻商指数以及代表多样性的Cairns 指数计算的结果不能反映水质的情况，这是由于水质状况不是决定九寨沟湖泊水体中硅藻生存的种类和数量的主要因素。因此在用各种指数分析水质的时候，都应该先判断计算该指数的参数是否主要由水质状况决定，然后再综合理化性质等其他指标分析和比较。 （5）人类的活动对九寨沟湖泊水生态系统有一定的影响。一方面，在低海拔景点人类活动的干扰比海拔高处相对要大，干扰引起低海拔景点湖泊硅藻Cairns指数较高；另一方面，旺季的影响比淡季大，水体中出现了典型富营养种类。因此，应加强低海拔景点和旺季的管理，并限制淡季的人类活动以保证九寨沟生态系统的自我恢复。 Jiuzhaigou nature reserve is located in north Sichuan, at the south section of Minshan Mountain, having a warm temperate climate which belongs to West Sichuan plateau climate. It includes 118 mountain lakes, and 20 of them between 2000 and 3000 altitude degree constitute the core area of Jiuzhaigou. The water is Jiuzhaigou's soul, so it is the basis of sustainable tourism development of Jiuzhaigou to protect the water ecological environment. Research depends on Jiuzhaigou wetland biodiversity protection program in this paper, invested the diatom plants in 17 lakes at the core area from May 2007 to April 2008. The composition and the correlation of diatom density and the environment were studied, which could provide scientific and basic information for the protection of the ecological environment of Jiuzhaigou. The main conclusions were: 1 The diatom species were in abundance, investigation showed that there were 159 species belong to 10 families and 35 genera. Most diatoms were benthos, euplankton were less. Genera Fragilaria, Navicula, Cymbella, Gomphonema and Achnanthes had the most species, which always were the dominant genera. Only in The Long Lake genus Cyclotella possessed a predominant status. 2 The diatom cell density was not very high, always between 4×104 cell/L and 30×104 cell/L, highest in The Long Lake and lowest in The Colorful Lake. In one year's time, diatom in different lakes had different growth type. The maximum could be in summer, late autumn and late winter early spring. The cell density showed a positive correlation to altitude in the whole, but fluctuated in details along altitude because of comprehensive influence by many environmental factors. 3 Altitude, water temperature and pH were the more important factors to determine the cell density. There was a positive correlation between the range of cell density in one year and the average cell density. So high annual cell average density probably will appear in lakes which has an unstable environmental condition. The boom of Denticula elegans in The Jade-Colored Lake in November was corresponding to the large decrease in water quantity. 4 The water quality of Jiuzhaigou was near the National Surface Water Standard rank I, but the Diatom Quotient and the Cairns Index didn't reflect the water quality accordingly. It was because the water quality wasn't the most important factor here which determined the species number and species quantity, so the index based on these items would not reflect it. Therefore, it is recommended that, when we use indices to evaluate the water quality, we should know first whether the water quality is the main determinative factor inflects the items used to compute the indices, and then combined with other chemical indices to analyze and do comparison. 5 The tourists' activities had influenced the water ecosystem of Jiuzhaigou. On the one hand, disturbance was relatively high at the lower altitude, it resulted in higher Cairns index; on the other hand, influence in high season was more severe than in low season, some typical species indicating eutrophication were observed in the water. It is suggested that the management at lower altitude and in high season must be strengthen, and less people activity in low season is necessary to fulfill the recovery of the water ecosystem.

Study on conical columns with different conical angles for semi-preparative liquid chromatography

The dynamic flow profiles and separation performances in conically shaped preparative liquid chromatographic columns (inlet i.d. larger than outlet i.d.) with three different angles (7, 10 and 15degrees) were studied and compared with cylindrical column of the same length and internal volume. The shapes of dynamic flow profiles were studied by on-column visualization method. The transparent chromatographic columns made of polymethyl methacrylate (PMMA), packed with C-18 bonded silica, were immerged into a cubic pool filled with glycerol to eliminate the cylindrical and conical lens effect. The flow profiles of colored iodine solution in the columns were observed clearly using cyclohexane as mobile phase since the refractive indices of C-18, column wall and the mobile phase are very close. In the conical column of 15degrees (20-7 mm i.d.) the mobile phase in the central region migrated slower than in wall region as it moved toward the column outlet, while in the conical column of 7degrees (17-11 mm i.d.) the mobile phase in the central region migrated faster than in wall region just like in cylindrical column. We found that a plug-like flow profile was generated in the conical column of 10degrees (18-9 mm i.d.) during the whole migration process. A carmine and brilliant blue mixture was used as a probe to test the separation ability of the columns. The resolutions of the two compounds on the conical column of 7, 10, 15degrees and on the cylindrical column were 0.6, 1.57, 1.29 and 0.8, respectively. (C) 2003 Elsevier B.V. All rights reserved.

基于有色Petri网的Web服务组合建模与分析

形式化定义了Web服务组合过程中的5种基本逻辑结构,并采用有色Petri网表示,然后将其抽象为服务的代数运算;在此基础上,提出了经过服务运算后得到的服务的性质及组合服务的构造方法;最后通过实例分析,说明该建模方法可以保证组合的服务是正确且可终止的。

Photo- and Thermo-Chromic Study of the Ethylenediamine Trimolybdate

The ethylenediamine trimolybdate (ENTMo) can show unusually photochromic and thermochromic properties and there exists in the difference of chromic mechanisms, which has been proved in our previous work [I]. In this paper, X-ray powder diffraction (XRD), Fourier transform infrared (FTIR) and laser Raman spectroscopy (LRS) of the colored samples are characterized and analyzed in detail. The crystal structure, the inorganic skeleton and the microenvironment of center ions of the colored samples do not substantively change except distortion. The color difference of the photochromic and the thermochromic samples is discussed and that the difference of reduction sites result in their different chromic mechanisms is suggested.

The further understanding of chain topology effect on the properties of single polymer in good solvent: Special behaviors of single tadpole chain

Chain topology strongly affects the static and dynamic properties of polymer melts and polymers in dilute solution. For different chain architectures, such as ring and linear polymers, the molecular size and the diffusion behavior are different. To further understand the chain topology effect on the static and dynamic properties of polymers, we focus on the tadpole polymer which consists of a cyclic chain attached with one or more linear tails. It is found that both the number and the length of linear tails play important roles on the properties of the tadpole polymers in dilute solution. For the tadpole polymers with fixed linear tail length and number, with increasing the degree of polymerization of tadpole polymers, a transition from linear-like to ring-like behavior is observed for both the static and dynamic properties.

Synthesis of isomeric bis(amine anhydride)s for novel poly(amine imide)s by Pd-catalyzed amination of 4-chlorophthalic anhydride

Two novel bis(amine anhydride) monomers, N,N'-bis(3,4-dicarboxyphenyl)-1,4-phenylenediamine dianhydride I and N,/N'-bis(3,4-dicarboxyphenyl)-1,3-phenylenediamine dianhydride 11, were prepared via palladium-catalyzed amination reaction of 4-chloro-N-methylphthaliniide with 1,4-phenylenediamine or 1,3-phenylenediamine, followed by alkaline hydrolysis of the intermediate bis(amine imide)s and subsequent dehydration of the resulting tetraacids. A series of new poly(amine imide)s were prepared from the synthesized dianhydride monomers with various diamines in NMP via conventional two-step method.

Crystallization behavior of a thermoplastic polyimide derived from 3,3 ',4,4 '-oxydiphthalic dianhydride and 4,4 '-oxydianiline

Nonisothermal and isothermal crystallization kinetics of an aromatic thermoplastic polyimide derived from 3,3',4,4'-oxydiphthalic dianhydride and 4,4'-oxydianiline have been investigated by means of differential scanning calorimetry (DSC) and wide-angle X-ray diffraction. The results for nonisothermal crystallization study showed that a weak melting peak appeared during the first heating process, whereas no crystallization peak appeared in the DSC curve during the subsequent cooling process. On the other hand, the study for the isothermal crystallization in the temperature range of 260-330 degrees C showed that a new exothermic peak appeared at lower temperature for the samples crystallized for 100 min at 300 degrees C.

Novel Sulfonated Polyimide Ionomers by Incorporating Pyridine Functional Group in the Polymer Backbone

A series of sulfonated polyimides (SPIs) containing pyridine ring in the polymer backbone were synthesized by the polycondensation of 1,4,5,8-naphthalene-tetracarboxylic dianhydride (NTDA), 5-(2,6-bis(4-arninophenyl)pyridin-4-yl)-2-methoxy benzene sulfonic acid (SDAM), and 4,4'-diaminodiphenyl ether (ODA). Flexible, transparent, and tough membranes were obtained. Property study revealed that all the membranes displayed high thermal stability with the desulfonation and decomposition temperature higher than 290 and 540 degrees C, respectively, as well as good mechanical property with Young's modulus larger than 1.0 GPa, maximum strength (MS) on a scale of 60-80 MPa, and elongation at break (EB) ranged from 41.79 to 75.17%.

Naphthalene-Based Poly(arylene ether ketone) Copolymers Containing Sulfobutyl Pendant Groups for Proton Exchange Membranes

A new monomer 1,5-bis(4-fluorobenzoyl)-2,6-dimethoxynaphthalene (DMNF) was prepared and further polymerized to form naphthalene-based poly(arylene ether ketone) copolymers containing methoxy groups (MNPAEKs). The side-chain-type sulfortated naphthalene-based poly(arylene ether ketone) copolymers (SNPAEKs) were obtained by demethylation and sulfobutylation. Flexible and tough membranes with reasonably high mechanical strength were prepared. The SNPAEKs membrane showed anisotropic membrane swelling with larger swelling in thickness than in plane. Transmission electron microscopy (TEM) analysis revealed clear nano-phase separated structure of SNPAEKs membranes, which composed of hydrophilic side chain and hydrophobic main-chain domains.

Synthesis of Soluble Poly(arylene ether sulfone) Ionomers with Pendant Quaternary Ammonium Groups for Anion Exchange Membranes

A new bisphenol monomer, 2,2'-dimethylaminemetllylene-4,4'-biphenol (DABP), was easily prepared by Mannich reaction of dimethylamine and formaldehyde with 4,4'-biphenol. Novel partially fluorinated poly(arylene ether sulfone)s with pendant quaternary ammonium groups were prepared by copolymerization of DABP, 4,4'-biphenol, and 3,3',4,4'- tetrafluorodiphenylsulfone, followed by reaction with iodomethane. The resulting copolymers PSQNI-x (where x represents the molar fraction of DABP in the feed) with high molecular weight exhibited outstanding solubility in polar aprotic solvents; thus, the flexible and tough membranes of PSQNI-x with varying ionic content could be prepared by casting from the DMAc solution. Novel anion exchange membranes, PSQNOH-x, were obtained by an anion exchange of PSQNI-x with 1 N NaOH.

Dispersions of carbon nanotubes in sulfonated poly[bis(benzimidazobenzisoquinolinones)] and their proton-conducting composite membranes

A sulfonated poly[bis(benzimidazobenzisoquinolinones)] (SPBIBI) possessing a conjugated pyridinone ring was shown to be effective for dispersing multiwalled carbon nanotubes (MWCNTs) in DMSO. The dispersions in which the SPBIBI to MWCNTs mass ratio was 4:1 demonstrated the highest MWCNTs concentrations, i.e., 1.5-2.0 mg mL(-1), and were found to be stable for more than six months at room temperature. Through casting of these dispersions, MWCNTs/SPBIBI composite membranes were successfully fabricated on substrates as proton exchange membranes for fuel cell applications and showed no signs of macroscopic aggregation. The properties of composite membranes were investigated, and it was found that the homogeneous dispersion of the MWCNTs in the SPBIBI matrix altered the morphology structures of the composite membranes, which lead to the formation of more regular and smaller cluster-like ion domains.

Synthesis and properties of soluble poly[bis(benzimidazobenzisoquinolinones)] based on novel aromatic tetraamine monomers

Four aromatic tetraamine monomers possessing flexible ether linkages were successfully synthesized by nucleophilic aromatic substitution of hydroquinone, 4,4'-dihydroxybiphenyl, 2,2'-bis(4-hydroxyphenyl)propane, and 2,7-dihydroxynaphthalene with 5-chloro-2-nitroaniline, followed by reduction, respectively. With these monomers, a new class of soluble poly[ bis(benzimidazobenzisoquinolinones)] was prepared by a one-step, high-temperature solution polycondensation. The resulting polymers were completely soluble in phenolic solvents and had high inherent viscosities ranging from 1.2 to 1.5 g dL(-1). These polymers had glass transition temperatures in the range of 427-449 degrees C. Thermogravimetric analysis showed that all polymers were thermally stable, with 5% weight loss recorded above 510 degrees C in nitrogen.

Novel hydrophilic-hydrophobic multiblock copolyimides as proton exchange membranes: Enhancing the proton conductivity

A series of novel multiblock copolymers based on sulfonated copolyimides were developed and evaluated for use as proton exchange membranes (PEMs). In these multiblock copolyimides, the hydrophilic blocks were composed of the sulfonated dianhydride and the sulfonated diamine, with sulfonic acid groups on every aromatic ring (i.e., fully sulfonated). This molecular design was implemented to effectively enhance the proton conductivity. The properties of the multiblock copolyimides with varying IEC values or block lengths were investigated to obtain a better understanding of the relationship between molecular structure and properties of proton exchange membranes. The water uptake and proton conductivity were found to be highly dependent upon their structure. The block copolymers displayed significantly higher proton conductivities, especially at low relative humidity than the random copolymers with a similar IEC.

Synthesis and properties of novel sulfonated poly(phenylquinoxaline)s as proton exchange membranes

Two series of sulfonated poly(phenylquinoxaline)s (SPPQ-x and SPPQ(O)-x, x refers to molar percentage of sulfonated tetraamine monomer) were first synthesized from a sulfonated tetraamine (4,4'-bis(3,4-diaminophenoxy)biphenyl-3.3'-disulfonic acid) and two aromatic bisbenzils (4-phenylglyoxalylbenzil and p,p'-oxydibenzil) in a mild condition. The structures of SPPQ-x and SPPQ(0)-x were characterized by IR and H-1 NMR spectra. The properties of these polymer films, such as water uptake, water swelling ratio, proton conductivity, thermal properties, methanol permeability, hydrolytic and oxidative stability were also investigated. The resulting polymers generally showed good solubility in DMAc and DMSO. Flexible and tough membranes with high mechanical strength were prepared. They show very high thermal, thermooxidative, hydrolytic stabilities and low methanol permeability. SPPQ-100 with the IEC value (2.41 mmol/g) displays the conductivity of 0.1 S/cm and a swelling ratio of 7.3% at 100 degrees C.