Time-to-Collision (TTC) judgements with offsize objects show that Tau needs to be intergrated with familiar size to explain TTC performance

Observers judged TTC with computer-generated displays simulating an approaching object in three familiar-size conditions:

(i) Real-size (smaller, larger objects depicted as tennis, soccer balls respectively).
(ii) Off-size (smaller, larger objects depicted as soccer, tennis balls respectively).
(iii) Ambiguous-size (smaller, larger objects depicted as texture-less black balls of different size).

Displays simulated objects approaching observersí viewpoint from 24.96 m, and disappearing at 5.76 m. Manipulation of approach velocities (4.8-19.2 msec-1) produced viewing times from 1.0 to 4.0 sec, and delays between object disappearance and tau-based TTC ranging from 0.3 to 1.2 sec. Motion characteristics of smaller and larger objects in the three familiar-size conditions simulated those of approaching real-sized tennis and soccer balls respectively; that is, for each approach velocity, tau‚-based TTC was the same across the three conditions for smaller and larger objects.

Results showed that, consistent with the proposition of tau-determined TTC, TTC estimates in the real-size condition were uninfluenced by object size. This is contrary to previous reports that TTC for larger objects is underestimated relative to TTC for smaller objects. However, such size-dependent TTC differences were found in the ambiguous-size condition, with even larger differences in the off-size condition; TTCs for the ëlargerí tennis ball were much less than TTCs to the ësmallerí soccer ball compared to corresponding TTCs in the ambiguous-size condition. These results are problematic for the proposition that tau solely determines TTC. We discuss the role of perceptual learning in resolving this problem.

Australia's strengths and weaknesses in technology transfer and R&D exploitation : GEM survey "experts" views compared with public policy and other published data

There has been increasing public debate in Australia in recent years about research culture in universities and other publicly funded research agencies such as CSIRO and its impact on Australia's performance in generating economic, social and environmental benefits to the Australian community from the large amount of public funding for R&D. This is the supply side issue. On the demand side there is equally concern about the technology absorptive capacity of Australian. business as illustrated by the low proportion of gross business research expenditure (GERD) spent by business (BERD). Against this background, this paper has explored the views of abut 100 "experts" interviewed in the Australian Global Entrepreneurship Monitor (GEM) studies in the years 2000, 2001, 2002 and 2003 on the issues, strengths and weaknesses of Australia's technology transfer performance as it applies to new technology small firms. The paper has also explored evidence for any longitudinal change over this period.

Microstructures and bond strengths of the calcium phosphate coatings formed on titanium from different simulated body fluids

Calcium phosphate (Ca-P) coatings were deposited on Ti substrates by a biomimetic method from m-SBF and 10× SBF, respectively. Comparative study of microstructures and bond strengths of the Ca-P coatings deposited from those different SBFs was carried out. Effect of the surface roughness of the substrates on the bond strength of the Ca-P coatings was also studied. Scanning electron microscopy (SEM), X-ray diffractometry (XRD), Fourier transformed infrared spectroscopy (FTIR), inductive coupled plasma spectrometry (ICP) and thermogravimetry (TG) were used to characterize the Ca-P coatings. The bond strengths between the coatings and Ti substrates were measured using an adhesive strength test. Results indicated that the ionic concentrations of the SBFs and the surface roughness of the substrate had a significant influence on the formation, morphology and bond strength of the Ca-P precipitates. The induction period of time to deposit a complete Ca-P layer from the m-SBF is much longer, but the Ca-P coating is denser and has higher bond strength than that formed from the 10× SBF. The Ti with a surface roughness of R_a 0.64 µm and R_z 2.81 µm favoures the formation of a compact Ca-P coating from the m-SBF with the highest bond strength of approximately 15.5 MPa.

Interparent agreement on the strengths and difficulties questionnaire : a Chinese study

This article reports on the first study to investigate interparent agreement when the Strengths and Difficulties Questionnaire (SDQ) is used to assess school-aged children. It is also the first study conducted in China on agreement between parents reporting on their child. Both parents of 380 girls and 320 boys completed the Strengths and Difficulties Questionnaire (Chinese version). Because reliabilities were poor, the Conduct Problems and Hyperactivity=Inattention subscales were merged to form an Externalizing Problems subscale, and the Peer Problems subscale as an independent variable was omitted from analyses. Consistent with past research, moderate to strong correlations were found between mother and father reports for emotional and behavioral problems, although interparent agreement was better for externalizing problems than internalizing problems for both girls and boys. Mothers reported significantly higher scores than fathers for prosocial behaviors for their sons. Findings suggest that, in general, one parent’s report will be similar to the other’s when the SDQ is used in the form adapted for this study. More work on the psychometric properties of the SDQ is needed in China.

Influence of particle concentration on initial collection efficiency and surface coverage in porous media filtration

Four sizes (0.095, 0.53, 1.0 and 2.01 μm) of polystyrene latex particles were used to prepare monodispersed suspensions at three different ionic strengths (10−3, 10−2.5 and 10−2M KCl). Filtration experiments were conducted using those suspensions in a filter column with glass beads as porous medium. The filter bed depth and the filtration velocity were kept at 5 cm and 1 m/h, respectively. When suspensions with equal mass concentrations (0.2 mg/L) or equal surface area concentrations (0.12 cm2/mL) were filtered through the system, the largest particles exhibited higher initial single collector efficiency, η. The difference between the η of largest particles and the smaller particles was prominent for suspensions with equal surface area concentrations at higher ionic strengths. The collision efficiency, α of those particles exhibits higher values at higher ionic strengths. Both at equal mass concentration and equal surface area concentration, α is only slightly dependent on particle sizes when compared to its dependence on ionic strength. Further, it was found that the specific surface coverage was similar for 0.095 μm, 0.53 μm and 1.0 μm particles during the transient stage of filtration at any ionic strength when the surface area concentrations of those suspension were equal.

Fracture strengths of Mg alloy AZ31B-H24 friction stir lap welds

The effects of selected friction stir lap welding parameters on fracture strength of Mg alloy AZ31B-H24 welds have been studied. Rotation speed has been found to affect significantly the flow related hook size formation. Furthermore, fracture strength decreased almost linearly with hook size. A small amount of softening was detected in fracture location that was outside the nugget zone and thus this softening may only adversely affect the fracture strength slightly. Finally, simulation results are presented to show the uneven stress distribution in a lap geometry which together with the relative brittleness of the stir material must be the cause to have significantly reduced the fracture strength.

Indoor location prediction using multiple wireless received signal strengths

This paper presents a framework for indoor location prediction system using multiple wireless signals available freely in public or office spaces. We first propose an abstract architectural design for the system, outlining its key components and their functionalities. Different from existing works, such as robot indoor localization which requires as precise localization as possible, our work focuses on a higher grain: location prediction. Such a problem has a great implication in context-aware systems such as indoor navigation or smart self-managed mobile devices (e.g., battery management). Central to these systems is an effective method to perform location prediction under different constraints such as dealing with multiple wireless sources, effects of human body heats or mobility of the users. To this end, the second part of this pa- per presents a comparative and comprehensive study on different choices for modeling signals strengths and prediction methods under different condition settings. The results show that with simple, but effective modeling method, almost perfect prediction accuracy can be achieved in the static environment, and up to 85% in the presence of human movements. Finally, adopting the proposed framework we outline a fully developed system, named Marauder, that support user interface interaction and real-time voice-enabled location prediction.