Radiocarbon Dating, Chronologic Framework, and Changes in Accumulation Rates of Holocene Estuarine Sediments from Chesapeake Bay

Rapidly accumulating Holocene sediments in estuaries commonly are difficult to sample and date. In Chesapeake Bay, we obtained sediment cores as much as 20min length and used numerous radiocarbon ages measured by accelerator mass spectrometry methods to provide the first detailed chronologies of Holocene sediment accumulation in the bay. Carbon in these sediments is a complex mixture of materials from a variety of sources. Analyses of different components of the sediments show that total organic carbon ages are largely unreliable, because much of the carbon (including coal) has been transported to the bay from upstream sources and is older than sediments in which it was deposited. Mollusk shells (clams, oysters) and foraminifera appear to give reliable results, although reworking and burrowing are potential problems. Analyses of museum specimens collected alive before atmospheric nuclear testing suggest that the standard reservoir correction for marine samples is appropriate for middle to lower Chesapeake Bay. The biogenic carbonate radiocarbon ages are compatible with 210Pb and 137Cs data and pollen stratigraphy from the same sites. Post-settlement changes in sediment transport and accumulation is an important environmental issue in many estuaries, including the Chesapeake. Our data show that large variations in sediment mass accumulation rates occur among sites. At shallow water sites, local factors seem to control changes in accumulation rates with time. Our two relatively deep-water sites in the axial channel of the bay have different long-term average accumulation rates, but the history of sediment accumulation at these sites appears to reflect overall conditions in the bay. Mass accumulation rates at the two deep-water sites rapidly increased by about fourfold coincident with widespread land clearance for agriculture in the Chesapeake watershed.

A revision of Evaniscus (Hymenoptera, Evaniidae) using ontology-based semantic phenotype annotation

The Neotropical evaniid genus Evaniscus Szepligeti currently includes six species. Two new species are described, Evaniscus lansdownei Mullins, sp. n. from Colombia and Brazil and E. rafaeli Kawada, sp. n. from Brazil. Evaniscus sulcigenis Roman, syn. n., is synonymized under E. rufithorax Enderlein. An identification key to species of Evaniscus is provided. Thirty-five parsimony informative morphological characters are analyzed for six ingroup and four outgroup taxa. A topology resulting in a monophyletic Evaniscus is presented with E. tibialis and E. rafaeli as sister to the remaining Evaniscus species. The Hymenoptera Anatomy Ontology and other relevant biomedical ontologies are employed to create semantic phenotype statements in Entity-Quality (EQ) format for species descriptions. This approach is an early effort to formalize species descriptions and to make descriptive data available to other domains.

Skeletal development in the fossorial gymnophthalmids Calyptommatus sinebrachiatus and Nothobachia ablephara

The development of the cartilaginous and bony elements that form the skull and axial and appendicular skeleton is described in detail for the post-ovipositional embryonic development of the fossorial gymnophthalmid species Calyptommatus sinebrachiatus and Nothobachia ablephara. Both species have a snake-like morphology, showing an elongated body and reduced or absent limbs, as well as modifications in skull bones for burrowing, such as complex articulation surfaces and development of bony extensions that enclose and protect the brain. Similar morphological changes have originated independently in several squamate groups, including the one that led to the snake radiation. This study characterizes the patterns of chondrogenesis and osteogenesis, with special emphasis on the features associated with the burrowing habit, and may be used for future comparative analyses of the developmental patterns involved in the origin of the convergent serpentiform morphologies. (C) 2012 Elsevier GmbH. All rights reserved.

Embryonic development of the fossorial gymnophthalmid lizards Nothobachia ablephara and Calyptommatus sinebrachiatus

The evolutionary history of the lizard family Gymnophthalmidae is characterized by several independent events of morphological modifications to a snake-like body plan, such as limb reduction, body elongation, loss of external ear openings, and modifications in skull bones, as adaptive responses to a burrowing and fossorial lifestyle. The origins of such morphological modifications from an ancestral lizard-like condition can be traced back to evolutionary changes in the developmental processes that coordinate the building of the organism. Thus, the characterization of the embryonic development of gymnophthalmid lizards is an essential step because it lays the foundation for future studies aiming to understand the exact nature of these changes and the developmental mechanisms that could have been responsible for the evolution of a serpentiform (snake-like) from a lacertiform (lizard-like) body form. Here we describe the post-ovipositional embryonic development of the fossorial species Nothobachia ablephara and Calyptommatus sinebrachiatus, presenting a detailed staging system for each one, with special focus on the development of the reduced limbs, and comparing their development to that of other lizard species. The data provided by the staging series are essential for future experimental studies addressing the genetic basis of the evolutionary and developmental variation of the Gymnophthalmidae. (C) 2012 Elsevier GmbH. All rights reserved.

Phylogeographic Structure and Karyotypic Diversity of the Brazilian Shrew Mouse (Blarinomys breviceps, Sigmodontinae) in the Atlantic Forest

Blarinomys breviceps possesses cryptic and burrowing habits with poorly documented genetics and life history traits. Due to its rarity, only a few specimens and DNA sequences have been deposited in collections worldwide. Here, we present the most comprehensive cytogenetic and molecular characterization of this rare genus. Phylogenetic analyses based on partial cytochrome b sequences were performed, attempting to establish the relationships among individuals with distinct karyotypes along the geographic distribution of the genus in the Atlantic Forest. Classical and molecular cytogenetics, using banding patterns and FISH of telomeric and whole chromosome X-specific painting probes (obtained from the Akodontini Akodon cursor) were used to characterize and compare the chromosomal complements. Molecular phylogenetic analyses recovered 2 main geographically structured clades, northeastern and southeastern with pair-wise sequence divergences among specimens varying between 4.9 and 8.4%. Eight distinct karyomorphs are described: (A) 2n = 52 (50A, XX), (B) 2n = 52 (48A, XY+2Bs), (C) 2n = 45 (42A, XY+1B), (D) 2n = 43 (37A, XX+4Bs), (E) 2n = 37 (34A, XY+1B), (F) 2n = 34 (32A, XX), (G) 2n = 31 (27A, XX+2Bs), (H) 2n = 28 (26A, XY), all with the same number of autosomal arms (FNA = 50). Variation of 0-4 supernumerary chromosomes (Bs) presenting heterogeneity in morphology and distribution of interstitial telomeric sequences (ITSs) is reported. ITSs are also found in some metacentric autosomes. The phylogeographic separation between 2 major lineages with high levels of genetic divergence, and the wide karyotypic diversity indicate that B. breviceps is a diverse group that warrants taxonomic re-evaluation. Copyright (C) 2012 S. Karger AG, Basel

Respiratory syncytial virus (RSV) pneumonia in a southern muriqui (Brachyteles arachnoides)

Background An adult male Brachyteles arachanoides, kept in captivity since 1990, was found dead without apparent clinical evidence. Methods Necropsy report, histopathology, immunohistochemistry, and ultrastructural examination were conducted. Results Pulmonary syncytial cells were positive for respiratory syncytial virus (RSV), and ultrastructural examination revealed viral particles inside macrophages compatible with the Paramyxoviridae family. Conclusions Muriquis are susceptible to RSV pneumonia followed by respiratory distress syndrome and death.

Ontologie per il Web Semantico: un'analisi comparativa

Il lavoro svolto in questa tesi è stato quello di analizzare il Web Semantico e i suoi linguaggi di rappresentazione delle informazioni. Inoltre sono state introdotte le ontologie evidenziando il loro ruolo all’interno del Web Semantico. Infine è stato fatto uno studio riguardo le ontologie attualmente sviluppate, allo scopo di portare a termine un’analisi comparativa delle stesse.

Interfaccia web per un sistema di condivisione semantica dell'informazione: studio e implementazione

Questa tesi progettuale nasce per integrare gli sforzi attuali sullo sviluppo del web semantico. La piattaforma di riferimento sulla quale è stato svolto il presente lavoro è SMART-M3. Questa piattaforma mette a disposizione uno spazio condiviso di informazioni, rappresentate e accessibili secondo le tecnologie del web semantico. In questo scenario, nasce la necessità di disporre di un'interfaccia web capace di interagire con la piattaforma - in grado di risolvere la complessità intrinseca dei dati semantici - allo scopo di averne un completo controllo; ricerche precedenti a questo proposito hanno dato come frutto una libreria PHP che mi è stata consegnata come strumento per lo sviluppo dell'interfaccia. La tesi si è articolata in 3 fasi principali: una fase iniziale di documentazione sull'argomento, eseguita principalmente sul libro “A developer's guide to the semantic web” di Liyang Yu e sulla tesi “Ontologie per il web semantico: un'analisi comparativa.” di Indrit Beqiri; una seconda fase, quella principale, di sviluppo del progetto informatico; una terza fase, infine, di sviluppo di questo elaborato di tesi, da considerarsi come la trattazione di tutto il percorso soprascritto, dall'inizio alla fine, secondo l'ordine cronologico in cui si svolto l'intero processo della tesi.

Modelli per l'aggregazione di dati federati: il caso degli orari di apertura degli esercizi commerciali e enti pubblici

Questa tesi tratta di scambio di dati aperti (open data exchange). In particolare, tratta di intervalli temporali con annesse informazioni di vario tipo. Le attività commerciali, come aziende, bar, ristoranti, cinema, teatri, e via dicendo, hanno bisogno di un modo comune per poter condividere i dati inerenti ai propri orari (timetable). Lo scopo di questa tesi è quello di mostrare un modello efficiente, compatto e completo per poter condividere tali informazioni con l'ausilio di formati standard (XML). Oggi giorno esistono diverse soluzioni atte a far fronte a questa necessità ma si tratta di soluzioni incomplete e che gestiscono tali informazioni separatamente. Il problema sorto è quello di avere un'unica struttura che posso unificare informazioni di diverso carattere con gli orari di un'attività: un cinema ha la necessità di fornire orari di diverse proiezioni svolte in sale diverse, una tournée dovrà poter specificare le coordinate geografiche del prossimo evento e così discorrendo.

Conversione per il Semantic Web di dati Turistico-Culturali: il progetto QRPlaces - Semantic Events

Il progetto QRPlaces - Semantic Events, oggetto di questo lavoro, focalizza l’attenzione sull’analisi, la progettazione e l’implementazione di un sistema che sia in grado di modellare i dati, relativi a diversi eventi facenti parte del patrimonio turistico - culturale della Regione Emilia Romagna 1, rendendo evidenti i vantaggi associati ad una rappresentazione formale incentrata sulla Semantica. I dati turistico - culturali sono intesi in questo ambito sia come una rappresentazione di “qualcosa che accade in un certo punto ad un certo momento” (come ad esempio un concerto, una sagra, una raccolta fondi, una rappresentazione teatrale e quant’altro) sia come tradizioni e costumi che costituiscono il patrimonio turistico-culturale e a cui si fa spesso riferimento con il nome di “Cultural Heritage”. Essi hanno la caratteristica intrinseca di richiedere una conoscenza completa di diverse informa- zioni correlata, come informazioni di geo localizzazione relative al luogo fisico che ospita l’evento, dati biografici riferiti all’autore o al soggetto che è presente nell’evento piuttosto che riferirsi ad informazioni che descrivono nel dettaglio tutti gli oggetti, come teatri, cinema, compagnie teatrali che caratterizzano l’evento stesso. Una corretta rappresentazione della conoscenza ad essi legata richiede, pertanto, una modellazione in cui i dati possano essere interconnessi, rivelando un valore informativo che altrimenti resterebbe nascosto. Il lavoro svolto ha avuto lo scopo di realizzare un dataset rispondente alle caratteristiche tipiche del Semantic Web grazie al quale è stato possibile potenziare il circuito di comunicazione e informazione turistica QRPlaces 2. Nello specifico, attraverso la conversione ontologica di dati di vario genere relativi ad eventi dislocati nel territorio, e sfruttando i principi e le tecnologie del Linked Data, si è cercato di ottenere un modello informativo quanto più possibile correlato e arricchito da dati esterni. L’obiettivo finale è stato quello di ottenere una sorgente informativa di dati interconnessi non solo tra loro ma anche con quelli presenti in sorgenti esterne, dando vita ad un percorso di collegamenti in grado di evidenziare una ricchezza informativa utilizzabile per la creazione di valore aggiunto che altrimenti non sarebbe possibile ottenere. Questo aspetto è stato realizzato attraverso un’in- terfaccia di MashUp che utilizza come sorgente il dataset creato e tutti i collegamenti con la rete del Linked Data, in grado di reperire informazioni aggiuntive multi dominio.

An architecture for scaling ontology networks

Constructing ontology networks typically occurs at design time at the hands of knowledge engineers who assemble their components statically. There are, however, use cases where ontology networks need to be assembled upon request and processed at runtime, without altering the stored ontologies and without tampering with one another. These are what we call "virtual [ontology] networks", and keeping track of how an ontology changes in each virtual network is called "multiplexing". Issues may arise from the connectivity of ontology networks. In many cases, simple flat import schemes will not work, because many ontology managers can cause property assertions to be erroneously interpreted as annotations and ignored by reasoners. Also, multiple virtual networks should optimize their cumulative memory footprint, and where they cannot, this should occur for very limited periods of time. We claim that these problems should be handled by the software that serves these ontology networks, rather than by ontology engineering methodologies. We propose a method that spreads multiple virtual networks across a 3-tier structure, and can reduce the amount of erroneously interpreted axioms, under certain raw statement distributions across the ontologies. We assumed OWL as the core language handled by semantic applications in the framework at hand, due to the greater availability of reasoners and rule engines. We also verified that, in common OWL ontology management software, OWL axiom interpretation occurs in the worst case scenario of pre-order visit. To measure the effectiveness and space-efficiency of our solution, a Java and RESTful implementation was produced within an Apache project. We verified that a 3-tier structure can accommodate reasonably complex ontology networks better, in terms of the expressivity OWL axiom interpretation, than flat-tree import schemes can. We measured both the memory overhead of the additional components we put on top of traditional ontology networks, and the framework's caching capabilities.

Interpreting Judgements using Knowledge Representation Methods and Computational Models of Argument

The goal of the present research is to define a Semantic Web framework for precedent modelling, by using knowledge extracted from text, metadata, and rules, while maintaining a strong text-to-knowledge morphism between legal text and legal concepts, in order to fill the gap between legal document and its semantics. The framework is composed of four different models that make use of standard languages from the Semantic Web stack of technologies: a document metadata structure, modelling the main parts of a judgement, and creating a bridge between a text and its semantic annotations of legal concepts; a legal core ontology, modelling abstract legal concepts and institutions contained in a rule of law; a legal domain ontology, modelling the main legal concepts in a specific domain concerned by case-law; an argumentation system, modelling the structure of argumentation. The input to the framework includes metadata associated with judicial concepts, and an ontology library representing the structure of case-law. The research relies on the previous efforts of the community in the field of legal knowledge representation and rule interchange for applications in the legal domain, in order to apply the theory to a set of real legal documents, stressing the OWL axioms definitions as much as possible in order to enable them to provide a semantically powerful representation of the legal document and a solid ground for an argumentation system using a defeasible subset of predicate logics. It appears that some new features of OWL2 unlock useful reasoning features for legal knowledge, especially if combined with defeasible rules and argumentation schemes. The main task is thus to formalize legal concepts and argumentation patterns contained in a judgement, with the following requirement: to check, validate and reuse the discourse of a judge - and the argumentation he produces - as expressed by the judicial text.

Generazione di ontologie da rappresentazioni grafiche

La produzione ontologica è un processo fondamentale per la crescita del Web Semantico in quanto le ontologie rappresentano i vocabolari formali con cui strutturare il Web of Data. Le notazioni grafiche ontologiche costituiscono il mezzo ideale per progettare ontologie OWL sensate e ben strutturate. Tuttavia la successiva fase di generazione ontologica richiede all'utente un fastidioso cambio sia di prospettiva sia di strumentazione. Questa tesi propone dunque GraMOS, Graffoo to Manchester OWL Syntax, un motore di trasformazione da modelli Graffoo a ontologie formali in grado di fondere le due fasi di progettazione e generazione ontologica.