I like the floors

The use of wood in architectural design and the sustainable built environment

Study on fatigue and energy-dissipation properties of nanolayered Cu/Nb thin films

Energy dissipation and fatigue properties of nano-layered thin films are less well studied than bulk properties. Existing experimental methods for studying energy dissipation properties, typically using magnetic interaction as a driving force at different frequencies and a laser-based deformation measurement system, are difficult to apply to two-dimensional materials. We propose a novel experimental method to perform dynamic testing on thin-film materials by driving a cantilever specimen at its fixed end with a bimorph piezoelectric actuator and monitoring the displacements of the specimen and the actuator with a fibre-optic system. Upon vibration, the specimen is greatly affected by its inertia, and behaves as a cantilever beam under base excitation in translation. At resonance, this method resembles the vibrating reed method conventionally used in the viscoelasticity community. The loss tangent is obtained from both the width of a resonance peak and a free-decay process. As for fatigue measurement, we implement a control algorithm into LabView to maintain maximum displacement of the specimen during the course of the experiment. The fatigue S-N curves are obtained.

Disaster risk reduction infrastructure requirements for South-Western Bangladesh:perspectives of local communities

Purpose: Development of effective disaster risk reduction (DRR) strategies for communities at risk of being affected by natural disasters is considered essential, especially in the wake of devastating disaster events reported worldwide. As part of a wider research study investigating community perspectives on existing and potential strategies for enhancing resilience to natural disasters, community perspectives on infrastructure and structural protection requirements were investigated. The paper aims to discuss these issues. Design/methodology/approach: Patuakhali region in South-Western Bangladesh is a region significantly at risk of multiple natural hazards. In order to engage local communities and obtain their perspectives, focus group discussions were held with local community leaders and policy makers of at-risk communities in Patuakhali region, South-Western Bangladesh. Findings: Infrastructure and structural protection requirements highlighted included multi-purpose cyclone shelters, permanent embankments and improved transport infrastructure. Much of the discussions of focus group interviews were focused on cyclone shelters and embankments, suggesting their critical importance in reducing disaster risk and also dependence of coastal communities on those two measures. Originality/value: The research design adopted sought to answer the research questions raised and also to inform local policy makers on community perspectives. Local policy makers involved in DRR initiatives in the region were informed of community perspectives and requirements, thus contributing to community engagement in implementing DRR activities.

Applicability of non-modular assessment in construction management and allied undergraduate programmes:perspective of the academics involved

Undergraduate programmes on construction management and other closely related built environment disciplines are currently taught and assessed on a modular basis. This is the case in the UK and in many other countries globally. However, it can be argued that professionally oriented programmes like these are better assessed on a non-modular basis, in order to produce graduates who can apply knowledge on different subject contents in cohesion to solve complex practical scenarios in their work environments. The examples of medical programmes where students are assessed on a non-modular basis can be cited as areas where this is already being done. A preliminary study was undertaken to explore the applicability of non-modular assessment within construction management undergraduate education. A selected sample of university academics was interviewed to gather their perspectives on applicability of non-modular assessment. General acceptance was observed among the academics involved that integrating non-modular assessment is applicable and will be beneficial. All academics stated that at least some form of non-modular assessment as being currently used in their programmes. Examples where cross-modular knowledge is assessed included comprehensive/multi-disciplinary project modules and creating larger modules to amalgamate a number of related subject areas. As opposed to a complete shift from modular to non-modular, an approach where non-modular assessment is integrated and its use further expanded within the current system is therefore suggested. This is due to the potential benefits associated with this form of assessment to professionally aligned built environment programmes

A conceptual framework for understanding resilience of construction SMEs to extreme weather events

Purpose Small and Medium-sized Enterprises (SMEs), which form a significant portion in many economies, are some of the most vulnerable to the impact of Extreme Weather Events (EWEs). This is of particular importance to the construction industry, as an overarching majority of construction companies are SMEs who account for the majority of employment and income generation within the industry. In the UK, previous research has identified construction SMEs as some of the worst affected by EWEs. Design/methodology/approach Given the recent occurrences of EWEs and predictions suggesting increases in both the intensity and frequency of EWEs in the future, improving the resilience of construction SMEs is vital for achieving a resilient construction industry. A conceptual framework is first developed which is then populated and expanded based on empirical evidence. Positioned within a pragmatic research philosophy, case study research strategy was adopted as the overall research strategy in undertaking this investigation. Findings Based on the findings of two in-depth case studies of construction SMEs, a framework was developed to represent EWE resilience of construction SMEs, where resilience was seen as a collective effect of vulnerability, coping strategies and coping capacities of SMEs, characteristics of the EWE and the wider economic climate. Originality/value The paper provides an original contribution towards the overarching agenda of the resilience of SMEs, and policy making in the area of EWE risk management by presenting a novel conceptual framework depicting the resilience of medium-sized construction companies.

The combined impact of urban heat island, thermal bridge effect of buildings and future climate change on the potential overwintering of Phlebotomus species in a Central European metropolis

Leishmaniasis is one of the most important emerging vector-borne diseases in Western Eurasia. Although winter minimum temperatures limit the present geographical distribution of the vector Phlebotomus species, the heat island effect of the cities and the anthropogenic heat emission together may provide the appropriate environment for the overwintering of sand flies. We studied the climate tempering effect of thermal bridges and the heat island effect in Budapest, Hungary. Thermal imaging was used to measure the heat surplus of heat bridges. The winter heat island effect of the city was evaluated by numerical analysis of the measurements of the Aqua sensor of satellite Terra. We found that the surface temperature of thermal bridges can be at least 3-7 °C higher than the surrounding environment. The heat emission of thermal bridges and the urban heat island effect together can cause at least 10 °C higher minimum ambient temperature in winter nights than the minimum temperature of the peri-urban areas. This milder micro-climate of the built environment can enable the potential overwintering of some important European Phlebotomus species. The anthropogenic heat emission of big cities may explain the observed isolated northward populations of Phlebotomus ariasi in Paris and Phlebotomus neglectus in the agglomeration of Budapest.

Potential urban distribution of Phlebotomus mascittii Grassi and Phlebotomus neglectus Tonn. (Diptera: Psychodidae) in 2021–50 in Budapest, Hungary

Background & Objective: The most northern populations of two sand fly species (Phlebotomus mascittii and Phlebotomus neclectus) in the Carpathian Basin are known from Central Hungary. The most important limiting factor of the distribution of Phlebotomus species in the region is the annual minimum temperature which may be positively affected by the urban heat island and the climate change in the future. Method: Based on the latest case reports of the species, Climate Envelope Model was done for the period 1961-1990 and 2025-2050 to project the potential urban distribution of the species. The climatic data were obtained from RegCM regional climate model and MODIS satellite images. Results: The recent occurrence of the species in Central Hungary indicates that Phlebotomus species can overwinter in non-heated shelters in the built environment. Interpretation & Conclusion: Jointly heat island and future climate change seem to be able to provide suitable environment for the studied species in urban areas in a great extent.

Evaluation of wind-induced internal pressure in low-rise buildings: A multi scale experimental and numerical approach

Hurricane is one of the most destructive and costly natural hazard to the built environment and its impact on low-rise buildings, particularity, is beyond acceptable. The major objective of this research was to perform a parametric evaluation of internal pressure (IP) for wind-resistant design of low-rise buildings and wind-driven natural ventilation applications. For this purpose, a multi-scale experimental, i.e. full-scale at Wall of Wind (WoW) and small-scale at Boundary Layer Wind Tunnel (BLWT), and a Computational Fluid Dynamics (CFD) approach was adopted. This provided new capability to assess wind pressures realistically on internal volumes ranging from small spaces formed between roof tiles and its deck to attic to room partitions. Effects of sudden breaching, existing dominant openings on building envelopes as well as compartmentalization of building interior on the IP were systematically investigated. Results of this research indicated: (i) for sudden breaching of dominant openings, the transient overshooting response was lower than the subsequent steady state peak IP and internal volume correction for low-wind-speed testing facilities was necessary. For example a building without volume correction experienced a response four times faster and exhibited 30–40% lower mean and peak IP; (ii) for existing openings, vent openings uniformly distributed along the roof alleviated, whereas one sided openings aggravated the IP; (iii) larger dominant openings exhibited a higher IP on the building envelope, and an off-center opening on the wall exhibited (30–40%) higher IP than center located openings; (iv) compartmentalization amplified the intensity of IP and; (v) significant underneath pressure was measured for field tiles, warranting its consideration during net pressure evaluations. The study aimed at wind driven natural ventilation indicated: (i) the IP due to cross ventilation was 1.5 to 2.5 times higher for Ainlet/Aoutlet>1 compared to cases where Ainlet/Aoutlet<1, this in effect reduced the mixing of air inside the building and hence the ventilation effectiveness; (ii) the presence of multi-room partitioning increased the pressure differential and consequently the air exchange rate. Overall good agreement was found between the observed large-scale, small-scale and CFD based IP responses. Comparisons with ASCE 7-10 consistently demonstrated that the code underestimated peak positive and suction IP.

Arquitetura bioclimática para instituição de ensino fundamental em São Gonçalo do Amarante/RN

In the design of a building process must consider climatic variations in the region, the external conditions and the use of available resources in nature, like the sun, vegetation, rain and winds, to provide a built environment with comfort and environment reduced energy expenditure. However, increasing urbanization, often with an occupancy of disordered ground comes disregarding this knowledge and disregarding local characteristics, drastically reducing the green areas. This disordered occupation associated with the reduction of green spaces, is modifying aspects of climate and thus, damaging the thermal comfort of users. Given this situation was born the question: What projetuais strategies can bring better thermal conditions to an educational building located in a region of hot and humid weather? Thus, faced with two important issues , education and environmental comfort , the research is justified by the fact that there is a large national demand for expansions and renovations in its public schools , but not in most areas provides students with quality for good learning development. This paper aims to draw up a project for establishment of Primary Education with the application of the concepts of bioclimatic, highlighting the use of vegetation as a regulatory element of the climate. Initially we carried out a literature search; we analyzed architectural solutions and set up the site. The next phases, called understanding, were raised with the laws, rules and environmental restrictions. Subsequently, the program needs and the development of architectural design was defined. The conclusion of this paper presents the definition of criteria and solutions for the use of vegetation to design of bioclimatic architecture in hot and humid climates and contributes a catalog of plant species for schools in the metropolitan region of Natal, RN.

Revestimento decorativo monocamada pigmentado, com resíduo de vidro temperado, para aplicação em fachadas

Although efficient from a technical point of view, mortar layers that make up the traditional masonry coating (slurry mortar, plaster and plaster) have to be in contradiction with the new construction technologies and more efficient methods of consumption and work rationalization. From an environmental point of view, the recovery of waste into new composites for the building has been a growing strand of studies in the scientific community, may prove to be a cost-effective solution in some cases. Thus, this research proposes the development of a mortar Decorative Coating Monolayer (RDM), for use in facades, produced on site, incorporating tempered glass waste (RVT) in the cement matrix, as a partial substitute for aggregate. Therefore, we adopted the binder respect / aggregate of 1: 6 (by volume), consistency index 250mm ± 20, sand substitution levels of glass waste 20%, 50% and 80% and relative water / cement varied in many traits. Two additives were used, a polymer, styrene-butadiene-based, and other chemical, besides mineral and silica fume inorganic pigment in colors red, yellow and blue. Mechanical tests were carried out on fresh pasta and hardened, as well as for the applied coating on masonry, so as to demonstrate the feasibility of the material. In addition, it verified the adequacy of the RDM built environment by means of thermal tests. The results demonstrated the feasibility of the proposed RDM with significantly higher values when compared to norms, especially the dash-added replacement content of 20% and addition of pigment in red. Therefore, the study shows the scientific community as an incentive to the use of technological innovations in construction, increasing the range of alternatives available for housing production, with the proposition of a material that achieves the desired functionality and obtain environmental gain, and may be adopted on construction sites as an alternative industrialized mortars.

Recomendações para um sistema de sinalização tátil a partir de abordagens ergonômicas e da percepção do deficiente visual para o Campus Parnamirim do IFRN

This study reports recommendations for a tactile and graphic wayfinding system aiming to offer more orientability and mobility for visually impaired people (blindness and low vision) at Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN), Parnamirim Campus. It was necessary to focus on visual impaired people and approach concepts like orientation and accessibility at the built environment. In order to provide the comprehension of a complex social phenomenon and preserve the meaningful characteristics of the events, this research has developed a single case study in which elements of Post Occupation Evaluation have been used. Its purpose was to allow not only a technical analysis, but also the user perception about the space in use. The chosen tool to collect the user’s opinions and considerations was the Walk Together Method. The collected and analyzed information has demonstrated that, although Parnamirim Campus has implemented some interventions in relation to the spatial accessibility, they are still not enough to create an environment which arranges safety and autonomy for the visual impaired people and the other ones who attend there. This study suggests that it happened because the engineering interventions at the Campus have been based on Brazilian technical standards NBR 9050:2004, which is proper for the physical impaired people, but it does not offer enough information to respond to all the specific needs demanded by all the classifications of visual impairment.