Resposta imune do antígeno de superfície de hepatite B administrado via nasal em nanopartículas de quitosana liofilizadas

A nanotecnologia tornou possível estruturar nanopartículas (NPs), utilizando-se polímeros biodegradáveis e atóxicos, como a quitosana (QS) - capaz de carrear e disponibilizar antígenos para a mucosa, devido sua propriedade mucoadesiva. Uma vacina liofilizada, em comparação a uma formulação líquida, possui inúmeras vantagens, tais como melhora na estabilidade do produto e melhor resistência às variações de temperatura, aumentando sua vida de prateleira e possibilitando melhor logística do produto aos locais onde o acesso à rede refrigerada é difícil; ademais, um produto liofilizado tem sua mucoadesividade aumentada, possibilitando maior tempo de permanência na mucosa. O presente trabalho teve como objetivo observar a resposta imune, em camundongos, de uma vacina desenvolvida por um mecanismo de entrega intranasal do HBsAg (Antígeno de superfície da Hepatite B) encapsulado pelo método de incorporação em nanopartículas de quitosana (NPs) liofilizadas. A formação das NPs foi realizada pela interação eletroestática da quitosana e do TPP (tripolifosfato de sódio), utilizando método de geleificação iônica. Formulações de NPs com glicina 5% apresentaram boas características após reconstituição, umidade residual inferior a 1% e processo de liofilização de 13 horas. Foi avaliada a imunogenicidade da inoculação do HBsAg em formulações de NPs de quitosana líquida e liofilizada, verificando-se que a forma líquida produziu anticorpos IgG contra HBsAg.

Estudo de nanocompósitos formados por PLA e nanopartículas de celulose.

Devido à preocupação com o meio ambiente e o volume crescente de resíduos plástico em aterros sanitários, os polímeros biodegradáveis estão sendo estudados extensivamente. Um deles é o PLA. Apesar de possuir propriedades comparáveis a polímeros commodities e polímeros de engenharia, ainda é necessário melhorar certas características do PLA, como resistência ao impacto. Para isso, a nanocelulose (NC) pode ser usada sem alterações significativas na biodegradação polimérica. Este estudo teve como objetivo obter a nanocelulose, caracteriza-la e incorpora-la ao poli(ácido láctico) (PLA), assim como, estudar as propriedades térmicas, morfológicas e mecânicas do compósito obtido. A NC foi obtida por hidrólise ácida utilizando ácido fosfórico e posteriormente foi silanizada com três silanos distintos. As nanopartículas foram caracterizadas por Birrefringência, Microscopia Eletrônica de Transmissão (MET), Termogravimetria (TG), Potencial Zeta, Espectroscopia Vibracional de Absorção no Infravermelho com Transformada de Fourier (FTIR) e Difração de Raio X (DRX). Com as imagens obtidas pelo MET foi possível medir o tamanho das partículas de NC. E então obter a razão de aspecto de 82 e o limite de percolação de 1,1% em massa, confirmando a morfologia de nanofibra. De acordo as analises TG\'s, a presença de NC silanizada aumentou o início da degradação térmica. Os compósitos, contendo 3% em massa de NC, foram obtidos por fusão em câmara de mistura e moldados por injeção. Os compósitos foram caracterizados por FTIR, Cromatografia de Permeação em Gel (GPC), TG, Calorimetria Exploratória Diferencial (DSC), Microscopia Eletrônica de Varredura (MEV-FEG), Impacto e Tração. As análises dos compósitos mostraram que a NC atuou como agente de nucleação, facilitando a cristalização do PLA, além de a NC ter atuado como reforço na matriz polimérica melhorando as propriedades mecânicas.

Identification of yeast genes that confer resistance to chitosan oligosaccharide (COS) using chemogenomics

Background: Chitosan oligosaccharide (COS), a deacetylated derivative of chitin, is an abundant, and renewable natural polymer. COS has higher antimicrobial properties than chitosan and is presumed to act by disrupting/permeabilizing the cell membranes of bacteria, yeast and fungi. COS is relatively non-toxic to mammals. By identifying the molecular and genetic targets of COS, we hope to gain a better understanding of the antifungal mode of action of COS. Results: Three different chemogenomic fitness assays, haploinsufficiency (HIP), homozygous deletion (HOP), and multicopy suppression (MSP) profiling were combined with a transcriptomic analysis to gain insight in to the mode of action and mechanisms of resistance to chitosan oligosaccharides. The fitness assays identified 39 yeast deletion strains sensitive to COS and 21 suppressors of COS sensitivity. The genes identified are involved in processes such as RNA biology (transcription, translation and regulatory mechanisms), membrane functions (e.g. signalling, transport and targeting), membrane structural components, cell division, and proteasome processes. The transcriptomes of control wild type and 5 suppressor strains overexpressing ARL1, BCK2, ERG24, MSG5, or RBA50, were analyzed in the presence and absence of COS. Some of the up-regulated transcripts in the suppressor overexpressing strains exposed to COS included genes involved in transcription, cell cycle, stress response and the Ras signal transduction pathway. Down-regulated transcripts included those encoding protein folding components and respiratory chain proteins. The COS-induced transcriptional response is distinct from previously described environmental stress responses (i.e. thermal, salt, osmotic and oxidative stress) and pre-treatment with these well characterized environmental stressors provided little or any resistance to COS. Conclusions: Overexpression of the ARL1 gene, a member of the Ras superfamily that regulates membrane trafficking, provides protection against COS-induced cell membrane permeability and damage. We found that the ARL1 COS-resistant over-expression strain was as sensitive to Amphotericin B, Fluconazole and Terbinafine as the wild type cells and that when COS and Fluconazole are used in combination they act in a synergistic fashion. The gene targets of COS identified in this study indicate that COS’s mechanism of action is different from other commonly studied fungicides that target membranes, suggesting that COS may be an effective fungicide for drug-resistant fungal pathogens.

Natural Pectin Polysaccharides as Edible Coatings

The most fashionable trends in food packaging research are targeted towards improvements in food quality and safety by increasing the use of environmentally-friendly materials, ideally those able to be obtained from bio-based resources and presenting biodegradable characteristics. Edible films represent a key area of development in new multifunctional materials by their character and properties to effectively protect food with no waste production. The use of edible films should be considered as a clean and elegant solution to problems related with waste disposal in packaging materials. In particular, pectin has been reported as one of the main raw materials to obtain edible films by its natural abundance, low cost and renewable character. The latest innovations in food packaging by the use of pectin-based edible films are reviewed in this paper, with special focus on the use of pectin as base material for edible coatings. The structure, properties related to the intended use in food packaging and main applications of pectins are herein reported.

The EU power sector needs long-term price signals. CEPS Special Report No. 135/April 2016

By 2030, half of the EU’s electricity demand will be covered by renewables and will need to be accompanied by flexible conventional back-up resources. Due to the high upfront costs inherent to renewables and the progressively lower running times associated with back-up capacity, the cost of capital will have a proportionately greater impact on total costs than today. This report examines how electricity markets can be designed to provide long-term price signals, thereby reducing the cost of capital for these technologies and allowing for a more efficient transition. It finds that current market arrangements are unable to provide long-term price signals. To address this issue, we argue that a system for long-term contracts with a regulated counterparty could be implemented. A centralised system where capacity or energy or a combination of both is contracted, could be introduced for conventional and renewable capacity, based on a regional adequacy assessment and with a competitive bidding system in place to ensure cost-effectiveness. Member states face a number of legislative barriers while implementing these types of systems, however, which could be reduced by merging legislation and setting EU framework rules for the design of these contractual agreements.

Alternative fuel information sources.

Mode of access: Internet.

Facts about CNG & LPG conversion.

Mode of access: Internet.

Alternative fuel glossary of terms.

Mode of access: Internet.

Domestic alternative fuel vehicle outlook.

Mode of access: Internet.

Annual report to Congress on the Automotive Technology Development Program. Tenth.

Mode of access: Internet.

Annual report to Congress on the Automotive Technology Development Program. Ninth.

Mode of access: Internet.

Annual report to Congress on the Automotive Technology Development Program. Eleventh.

Mode of access: Internet.

Annual report to Congress on the Automotive Technology Development Program. Fifteenth.

Mode of access: Internet.

Budget-in-brief /

Description based on: Fiscal year 1997; title from cover.

Opportunities for advanced ceramics to meet the needs of the industries of the future /

"DOE/ORO 2076."