Automatic extraction of Reduced order models from CFD simulations for building energy modeling

Thermal comfort is defined as “that condition of mind which expresses satisfaction with the thermal environment’ [1] [2]. Field studies have been completed in order to establish the governing conditions for thermal comfort [3]. These studies showed that the internal climate of a room was the strongest factor in establishing thermal comfort. Direct manipulation of the internal climate is necessary to retain an acceptable level of thermal comfort. In order for Building Energy Management Systems (BEMS) strategies to be efficiently utilised it is necessary to have the ability to predict the effect that activating a heating/cooling source (radiators, windows and doors) will have on the room. The numerical modelling of the domain can be challenging due to necessity to capture temperature stratification and/or different heat sources (radiators, computers and human beings). Computational Fluid Dynamic (CFD) models are usually utilised for this function because they provide the level of details required. Although they provide the necessary level of accuracy these models tend to be highly computationally expensive especially when transient behaviour needs to be analysed. Consequently they cannot be integrated in BEMS. This paper presents and describes validation of a CFD-ROM method for real-time simulations of building thermal performance. The CFD-ROM method involves the automatic extraction and solution of reduced order models (ROMs) from validated CFD simulations. The test case used in this work is a room of the Environmental Research Institute (ERI) Building at the University College Cork (UCC). ROMs have shown that they are sufficiently accurate with a total error of less than 1% and successfully retain a satisfactory representation of the phenomena modelled. The number of zones in a ROM defines the size and complexity of that ROM. It has been observed that ROMs with a higher number of zones produce more accurate results. As each ROM has a time to solution of less than 20 seconds they can be integrated into the BEMS of a building which opens the potential to real time physics based building energy modelling.

X-ray Polarization Measurements of Dense Plasmas Heated by Fast Electrons

The detailed knowledge of fast electron energy transport following interaction with high-intensity, ultra-short laser pulses is a key area for secondary source generation for ELI. We demonstrate polarization spectroscopy at laser intensities up to 10(21) Wcm(-2). This is significant as it suggests that in situ emission spectroscopy may be used as an effective probe of fast electron velocity distributions in regimes relevant to electron transport in solid targets. Ly-alpha doublet emission of nickel (Z = 28) and sulphur (Z = 16) is observed to measure the degree of polarization from the Ly-alpha(1) emission. Ly-alpha(2) emission is unpolarized, and as such acts as a calibration source between spectrometers. The measured ratio of the X-ray sigma- and pi-polarization allows the possibility to infer the velocity distribution function of the fast electron beam.

Aza-annulation of enaminones with itaconic anhydride:kinetic preference for exocyclic enamide products

Enaminones react with itaconic anhydride in methylene chloride at room temperature to give exocyclic enamides sis the major products. These can be readily equilibrated to the thermodynamically more stable endocyclic enamides. In substrates where the exocyclic isomer could not be formed only intractable materials were produced from this reaction. An intermediate in this two step process was detected and identified by proton and C-13 NMR spectroscopy. In two cases chiral enaminones were employed and the relative stereochemistry at the new chiral centre in the product was established by a crystal structure of compound 27.

X-ray Polarization Spectroscopy from Ultra-Intense Interactions

Detailed knowledge of fast electron energy transport following the interaction of ultrashort intense laser pulses is a key subject for fast ignition. This is a problem relevant to many areas of laser-plasma physics with particular importance to fast ignition and X-ray secondary source development, necessary for the development of large-scale facilities such as HiPER and ELI. Operating two orthogonal crystal spectrometers set at Bragg angles close to 45 degrees determines the X-ray s- and p-polarization ratio. From this ratio, it is possible to infer the velocity distribution function of the fast electron beam within the dense plasma. We report on results of polarization measurements at high density for sulphur and nickel buried layer targets in the high intensity range of 10(19) - 10(21) Wcm(-2). We observe at 45 degrees the Ly-alpha doublet using two sets of orthogonal highly-orientated pyrolytic graphite (HOPG) crystals set in 1(st) order for sulphur and 3(rd) order for nickel.

The Nature of Magnetoelectric Coupling in Pb(Zr,Ti)O3-Pb(Fe,Ta)O3

The coupling between magnetization and polarization in a room temperature multiferroic (Pb(Zr,Ti)O3–Pb(Fe,Ta)O3) is explored by monitoring changes in capacitance that occur when a magnetic field is applied in each of three orthogonal directions. Magnetocapacitance effects, consistent with P2M2 coupling, are strongest when fields are applied in the plane of the single crystal sheet investigated.

Sensitized terbium(iii) macrocyclic-phthalimide complexes as luminescent pH switches

Four new macrocyclic-phthalimide ligands were synthesised via the coupling of N-(3-bromopropyl)phthalimide either to cyclen (1,4,7,10- tetraazacyclododecane) itself or its carboxylate-functionalized analogues, and photophysical studies were carried out on their corresponding Tb(iii) complexes in aqueous media as a function of pH. Luminescence intensities of Tb·L^1a-Tb·L^3a were in 'switched off' mode under acidic conditions (pH < 4), and were activated on progression to basic conditions as the phthalimido functions therein were hydrolysed to their corresponding phthalamates Tb·L^1b-Tb·L^3b. Emission of phthalamate-based macrocyclic Tb(iii) complexes Tb·L ^1b-Tb·L^3b was in 'switched on' mode between pH 4 and 11, exhibiting high quantum yields (Φ) and long lifetimes (τ) of the order of milliseconds at pH ∼ 6. Tb(iii) emissions were found to decline with increasing number of chromophores. The values of Φ and τ were 46% and 2.4 ms respectively for Tb·L^1b at pH ∼ 6 when activated. This is the best pH-dependent sensor based on a Tb(iii) complex reported to date, benefiting from the macrocyclic architecture of the ligand. © 2013 The Royal Society of Chemistry.

Establishing the validity of English GP Patient Survey items evaluating out-of-hours care

Background A 2014 national audit used the English General Practice Patient Survey (GPPS) to compare service users’ experience of out-of-hours general practitioner (GP) services, yet there is no published evidence on the validity of these GPPS items. Objectives Establish the construct and concurrent validity of GPPS items evaluating service users’ experience of GP out-of-hours care. Methods Cross-sectional postal survey of service users (n=1396) of six English out-of-hours providers. Participants reported on four GPPS items evaluating out-of-hours care (three items modified following cognitive interviews with service users), and 14 evaluative items from the Out-of-hours Patient Questionnaire (OPQ). Construct validity was assessed through correlations between any reliable (Cochran's α>0.7) scales, as suggested by a principal component analysis of the modified GPPS items, with the ‘entry access’ (four items) and ‘consultation satisfaction’ (10 items) OPQ subscales. Concurrent validity was determined by investigating whether each modified GPPS item was associated with thematically related items from the OPQ using linear regressions. Results The modified GPPS item-set formed a single scale (α=0.77), which summarised the two-component structure of the OPQ moderately well; explaining 39.7% of variation in the ‘entry access’ scores (r=0.63) and 44.0% of variation in the ‘consultation satisfaction’ scores (r=0.66), demonstrating acceptable construct validity. Concurrent validity was verified as each modified GPPS item was highly associated with a distinct set of related items from the OPQ. Conclusions Minor modifications are required for the English GPPS items evaluating out-of-hours care to improve comprehension by service users. A modified question set was demonstrated to comprise a valid measure of service users’ overall satisfaction with out-of-hours care received. This demonstrates the potential for the use of as few as four items in benchmarking providers and assisting services in identifying, implementing and assessing quality improvement initiatives.

The use of patient experience survey data by out-of-hours primary care services: a qualitative interview study

Background English National Quality Requirements mandate out-of-hours primary care services to routinely audit patient experience, but do not state how it should be done.

Objectives We explored how providers collect patient feedback data and use it to inform service provision. We also explored staff views on the utility of out-of-hours questions from the English General Practice Patient Survey (GPPS).

Methods A qualitative study was conducted with 31 staff (comprising service managers, general practitioners and administrators) from 11 out-of-hours primary care providers in England, UK. Staff responsible for patient experience audits within their service were sampled and data collected via face-to-face semistructured interviews.

Results Although most providers regularly audited their patients’ experiences by using patient surveys, many participants expressed a strong preference for additional qualitative feedback. Staff provided examples of small changes to service delivery resulting from patient feedback, but service-wide changes were not instigated. Perceptions that patients lacked sufficient understanding of the urgent care system in which out-of-hours primary care services operate were common and a barrier to using feedback to enable change. Participants recognised the value of using patient experience feedback to benchmark services, but perceived weaknesses in the out-of-hours items from the GPPS led them to question the validity of using these data for benchmarking in its current form.

Conclusions The lack of clarity around how out-of-hours providers should audit patient experience hinders the utility of the National Quality Requirements. Although surveys were common, patient feedback data had only a limited role in service change. Data derived from the GPPS may be used to benchmark service providers, but refinement of the out-of-hours items is needed.

A Simple Model to Quantify Radiolytic Production following Electron Emission from Heavy-Atom Nanoparticles Irradiated in Liquid Suspensions

We present a simple model for a component of the radiolytic production of any chemical species due to electron emission from irradiated nanoparticles (NPs) in a liquid environment, provided the expression for the G value for product formation is known and is reasonably well characterized by a linear dependence on beam energy. This model takes nanoparticle size, composition, density and a number of other readily available parameters (such as X-ray and electron attenuation data) as inputs and therefore allows for the ready determination of this contribution. Several approximations are used, thus this model provides an upper limit to the yield of chemical species due to electron emission, rather than a distinct value, and this upper limit is compared with experimental results. After the general model is developed we provide details of its application to the generation of HO(•) through irradiation of gold nanoparticles (AuNPs), a potentially important process in nanoparticle-based enhancement of radiotherapy. This model has been constructed with the intention of making it accessible to other researchers who wish to estimate chemical yields through this process, and is shown to be applicable to NPs of single elements and mixtures. The model can be applied without the need to develop additional skills (such as using a Monte Carlo toolkit), providing a fast and straightforward method of estimating chemical yields. A simple framework for determining the HO(•) yield for different NP sizes at constant NP concentration and initial photon energy is also presented.

Hyperbolic Polaritonic Crystals Based on Nanostructured Nanorod Metamaterials

Surface plasmon polaritons usually exist on a few suitable plasmonic materials; however, nanostructured plasmonic metamaterials allow a much broader range of optical properties to be designed. Here, bottom-up and top-down nanostructuring are combined, creating hyperbolic metamaterial-based photonic crystals termed hyperbolic polaritonic crystals, allowing free-space access to the high spatial frequency modes supported by these metamaterials.

Good Laboratory Practice for optimization research

Good Laboratory Practice has been a part of non-clinical research for over 40 years. Optimization Research, despite having many papers discussing standards being published over the same period of time, has yet to embrace standards that underpin its research. In this paper we argue the need to adopt standards in optimization research. Building on previous papers, many of which have suggested that the optimization research community should adopt certain standards, we suggest a concrete set of recommendations that the community should adopt. We also discuss how the proposals in this paper could be progressed.