The connective tissue of the adductor canal - a morphological study in fetal and adult specimens

The adductor canal is a conical or pyramid-shaped pathway that contains the femoral vessels, saphenous nerve and a varying amount of fibrous tissue. It is involved in adductor canal syndrome, a claudication syndrome involving young individuals. Our objective was to study modifications induced by aging on the connective tissue and to correlate them to the proposed pathophysiological mechanism. The bilateral adductor canals and femoral vessels of four adult and five fetal specimens were removed en bloc and analyzed. Sections 12 mu m thick were obtained and the connective tissue studied with Sirius Red, Verhoeff, Weigert and Azo stains. Scanning electron microscopy (SEM) photomicrographs of the surfaces of each adductor canal were also analyzed. Findings were homogeneous inside each group. The connective tissue of the canal was continuous with the outer layer of the vessels in both groups. The pattern of concentric, thick collagen type I bundles in fetal specimens was replaced by a diffuse network of compact collagen bundles with several transversal fibers and an impressive content of collagen III fibers. Elastic fibers in adults were not concentrated in the thick bundles but dispersed in line with the transversal fiber system. A dynamic compression mechanism with or without an evident constricting fibrous band has been proposed previously for adductor canal syndrome, possibly involving the connective tissue inside the canal. The vessels may not slide freely during movement. These age-related modifications in normal individuals may represent necessary conditions for this syndrome to develop.

Spectral absorption properties of aerosol particles from 350-2500nm

The aerosol spectral absorption efficiency (alpha(a) in m(2)/g) is measured over an extended wavelength range (350-2500 nm) using an improved calibrated and validated reflectance technique and applied to urban aerosol samples from Sao Paulo, Brazil and from a site in Virginia, Eastern US, that experiences transported urban/industrial aerosol. The average alpha(a) values (similar to 3m(2)/g at 550 nm) for Sao Paulo samples are 10 times larger than a a values obtained for aerosols in Virginia. Sao Paulo aerosols also show evidence of enhanced UV absorption in selected samples, probably associated with organic aerosol components. This extra UV absorption can double the absorption efficiency observed from black carbon alone, therefore reducing by up to 50% the surface UV fluxes, with important implications for climate, UV photolysis rates, and remote sensing from space. Citation: Martins, J.V., P. Artaxo, Y.J. Kaufman, A.D. Castanho, and L.A. Remer (2009), Spectral absorption properties of aerosol particles from 350-2500nm, Geophys. Res. Lett., 36, L13810, doi: 10.1029/2009GL037435.

Temperature Dependence of the Intergranular Critical Current Density in Uniaxially Pressed Bi(1.65)Pb(0.35)Sr(2)Ca(2)Cu(3)O(10+delta) Samples

We have studied the normal and superconducting transport properties of Bi(1.65)Pb(0.35)Sr(2)Ca(2)Cu(3)O(10+delta) (Bi-2223) ceramic samples. Four samples, from the same batch, were prepared by the solid-state reaction method and pressed uniaxially at different compacting pressures, ranging from 90 to 250 MPa before the last heat treatment. From the temperature dependence of the electrical resistivity, combined with current conduction models for cuprates, we were able to separate contributions arising from both the grain misalignment and microstructural defects. The behavior of the critical current density as a function of temperature at zero applied magnetic field, J (c) (T), was fitted to the relationship J (c) (T)ae(1-T/T (c) ) (n) , with na parts per thousand 2 in all samples. We have also investigated the behavior of the product J (c) rho (sr) , where rho (sr) is the specific resistance of the grain-boundary. The results were interpreted by considering the relation between these parameters and the grain-boundary angle, theta, with increasing the uniaxial compacting pressure. We have found that the above type of mechanical deformation improves the alignment of the grains. Consequently the samples exhibit an enhance in the intergranular properties, resulting in a decrease of the specific resistance of the grain-boundary and an increase in the critical current density.

Bond Strength of Dental Adhesive Systems Irradiated with Ionizing Radiation

Purpose: The aim of the present paper was to determine the effect of different types of ionizing radiation on the bond strength of three different dentin adhesive systems. Materials and Methods: One hundred twenty specimens of 60 human teeth (protocol number: 032/2007) sectioned mesiodistally were divided into 3 groups according to the adhesives systems used: SB (Adper Single Bond Plus), CB (Clearfil SE Bond) and AP (Adper Prompt Self-Etch). The adhesives were applied on dentin and photo-activated using LED (Lec 1000, MMoptics, 1000 mW/cm(2)). Customized elastomer molds (0.5 mm thickness) with three orifices of 1.2 mm diameter were placed onto the bonding areas and filled with composite resin (Filtek Z-250), which was photo-activated for 20 s. Each group was subdivided into 4 Subgroups for application of the different types of ionizing radiation: ultraviolet radiation (UV), diagnostic x-ray radiation (DX), therapeutic x-ray radiation (TX) and without irradiation (control group, CG). Microshear tests were carried out (Instron, model 4411), and afterwards the modes of failure were evaluated by optical and scanning electron microscope and classified using 5 scores: adhesive failure, mixed failures with 3 significance levels, and cohesive failure. The results of the shear bond strength test were submitted to ANOVA with Tukey`s test and Dunnett`s test, and the data from the failure pattern evaluation were analyzed with the Mann Whitney test (p = 0.05). Results: No change in bond strength of CB and AP was observed after application of the different radiation types, only SB showed increase in bond strength after UV (p = 0.0267) irradiation. The UV also changed the failure patterns of SB (p = 0.0001). Conclusion: The radio-induced changes did not cause degradation of the restorations, which means that they can be exposed to these types of ionizing radiation without weakening the bond strength.

Recovery of DNA for the detection and genotyping of human papillomavirus from clinical cervical specimens stored for up to 2 years in a universal collection medium with denaturing reagent

The recovery and stability of DNA for the detection and genotyping of HPV in UCM-containing specimens, after exposure to denaturing reagents and stored for up to 2 years were evaluated. Samples were collected from 60 women who had cervical cytology specimens harboring cervical intraepithelial neoplasia (CIN) 2 or 3. All samples were stored in UCM and had been frozen at -20 degrees C following the addition of the denaturing reagent (sodium hydroxide) and the removal of the aliquot required for Hybrid Capture 2 testing for the identification of HPV DNA. The samples had been stored for 6, 12 and 24 months (20 samples for each storage time). HPV DNA extraction was performed according to a protocol designed specifically and the presence and quality of DNA was confirmed by human P-globin detection using the consensus primers G73 and G74. HPV DNA was amplified using the consensus primers PGMY09 and PGMY11, and reverse line-blot hybridization was used to detect type-specific amplicons for 37 HPV types. The DNA extracted from the denatured specimen was recovered in 57/60 (95%) of the samples. HPV DNA was detected in 56/57 (98%) of the recovered samples. Twenty-six of the 56 samples recovered (48%) were genotyped successfully. (c) 2007 Elsevier B.V. All rights reserved.

Differential Acetyl Cholinesterase Inhibition by Volatile Oils from two Specimens of Marlierea racemosa (Myrtaceae) Collected from Different Areas of the Atlantic Rain Forest

The volatile oil composition and anti-acetyl cholinesterase activity were analyzed in two specimens of Marlierea racemosa growing in different areas of the Atlantic Rain Forest (Cananeia and Caraguatatuba, SP, Brazil). Component identifications were performed by GUMS and their acetyl cholinesterase inhibitory activity was measured through colorimetric analysis. The major constituent in both specimens was spathulenol (25.1 % in Cananeia and 31.9% in Caraguatatuba). However, the first one also presented monoterpenes (41.2%), while in the Carguatatuba plants, this class was not detected. The oils from the plants collected in Cananeia were able to inhibit the acetyl cholinesterase activity by LIP to 75%, but for oils from the other locality the maximal inhibition achieved was 35%. These results suggested that the monoterpenes are more effective in the inhibition of acetyl cholinesterase activity than sesquiterpenes as these compounds are present in higher amounts in the M. racemosa plants collected in Cananeia.

Flexural properties, microleakage, and degree of conversion of a resin polymerized with conventional light and argon laser

Objective: To evaluate the flexural strength, microleakage, and degree of conversion of a microhybrid resin polymerized with argon laser and halogen lamp. Method and Materials: For both flexural test and degree of conversion analysis, 5 bar samples of composite resin were prepared and polymerized according to ISO 4049. The halogen light-curing unit was used with 500 MW/cm(2) for 20 seconds and the argon laser with 250 mW for 10 and 20 seconds. Samples were stored in distilled water in a dark environment at 37 degrees C for 24 hours. The flexural property was quantified by a 3-point loading test. For the microleakage evaluation, 60 bovine incisors were used to prepare standardized Class 5 cavities, which were restored and polished. Specimens were stored in distilled water for 24 hours at 37 degrees C and thermocycled 500 times (6 degrees C to 60 degrees C). Specimens were then immersed in art aqueous solution of basic fuchsin for 24 hours. Longitudinal sections of each restoration were obtained and examined with a stereomicroscope for qualitative evaluation of microleakage. Fourier transform (FT)-Raman RFS 100/S spectrometer (Bruker) was used to analyze the degree of conversion. Results: ANOVA showed no statistically significant differences of flexural strength between the photoactivation types evaluated in the flexural study. Microleakage data were statistically analyzed by Mann-Whitney and Kruskal-Wallis tests. Enamel margins resulted in a statistically lower degree of leakage than dentin margins. No statistically significant difference was found among the 3 types of photocuring studied. ANOVA also showed no statistically significant difference in the degree of conversion among the studied groups. Conclusion: According to the methodology used in this research, the argon laser is a possible alternative for photocuring, providing the same quality of polymerization as the halogen lamp. None of the photocured units tested in this study completely eliminated microleakage.

Dereplication of Bromotyrosine-derived Metabolites by LC-PDA-MS and Analysis of the Chemical Profile of 14 Aplysina Sponge Specimens from the Brazilian Coastline

In order to investigate the chemical profile of 14 specimens of Aplysina spp. marine sponges, we have developed a method based on LC-PDA-MS for the detection of bromotyrosine-derived metabolites. The method enabled the dereplication of three distinct chemotypes of bromotyrosine-derived compounds based on UV absorptions, which were further refined by electrospray ionization-mass spectrometry analysis of the brominated quasi-molecular ion clusters. This procedure led to either a single compound assignment, or a maximum of two possible isobaric compounds. The dereplication study indicated that the chemical profile of the 14 specimens of Aplysina spp. analyzed presented practically the same dibromotyrosine-derived compounds. The results obtained suggested a possible biogenetic pathway for the formation of dibromotyrosine-derived compounds of wide occurrence in Verongida sponges.

The impact of big-boxes on local retail : What happens when IKEA comes to town?

The development of large discount retailers, or big-boxes as they are sometimes referred to, are often subject to heated debate and their entry on a market is greeted with either great enthusiasm or dread. For instance, the world’s largest retailer Wal-Mart (Forbes 2014) has a number of anti- and pro-groups dedicated to its being and the event of a Wal-Mart entry tends to be met with protests and campaigns (Decamme 2013) but also welcomed by, for instance, consumers (Davis & DeBonis 2013). Also in Sweden, the entry of a big box is a hot topic and before IKEA’s opening i Borlänge 2013, the first in Sweden in more than five years, great expectations were mixed with worry (Västerbottens-Kuriren 2011).The presence of large scale discount retailers is not, however, a novel phenomenon but a part of a long-term change in retailing that has taken place globally over the past couple of decades (Taylor & Smalling, 2005). As noted by Dawson (2006), the trend in Europe has over the past few decades gone towards an increasing concentration of large firms along with a decrease of smaller firms.This trend is also detectable in the Swedish retail industry. Over the past decade, the retailing industry in Sweden has increased by around 190 Billion SEK, and its share of GDP has risen from 2,7% to 2,9%, while the number of employees have increased from 200 000 to 250 000 (HUI 2013). This growth, however, has not been distributed evenly but rather it has been oriented mainly towards out-of-town retail clusters. Parallel to this development, the number of large retailers has risen at the expense of market shares of smaller independent firms (Rämme et al 2010). Thereby, the presence of large scale retailers is simply part of a changing retail landscape.The effects of this development, where large scale retailing agents relocate shopping to out-of-town shopping areas, have been heavily debated. On the one hand, the big-boxes are accused of displacing independent small retail businesses in the city-centers and the residential areas, resulting in, to some extent, reduced employment opportunities and less availability for the consumers - especially the elderly (Ljungberg et al 2006). In addition, as access to shopping now tends to require some sort of a motorized vehicle, environmental aspects to the discussion have emerged. Ultimately these types of concerns have resulted in calls for regulations against this development (Olsson 2010). On the other hand, the proponents of the new shopping landscape argue that this evolution implies productivity gains, the benefits of lower prices and an increased variety of products (Maican & Orth 2012). Moreover it is argued that it leads to, for instance, better services (such as longer opening hours) and a creative destruction transformation pressure on retailers, which brings about a renewal of city-centerIIretail and services, increasing their attractivity (Bergström 2010). The belief in benefits of a big box entry can be exemplified by the attractivity of IKEA, and the fact that municipalities are prepared to commit to expenses amounting up to hundreds of millions in order to attract the entry of this big-box. Borlänge municipality, for instance, agreed to expenses of about 350 million SEK in order to secure the entry of IKEA, which opened in 2013 (Blomgren 2009).Against this backdrop, the overall effects of large discount retailers become important: Are the economic benefits enough to warrant subsidies or are there, on the contrary, some very compelling grounds for regulations against these types of establishments? In other words; how is overall retail in a region where a store like IKEA enters affected? And how are local retail firms affected?In order to answer these questions, the purpose of this thesis is to study how entry of a big-box retailer affects the entry region. The object of this study is IKEA - one of the world’s largest retailers, with 345 stores, active in over 40 countries and with profits of about 3.3 billion (IKEA 2013; IKEA 2014). By studying the effects of IKEA-entry, both on an aggregated level and on firm level, this thesis intends to find indications of how large discount retail establishments in general can be expected to affect the economic development both in a region overall, but also on the local firm level, something which is of interest to both policymakers as well as the retailing industry in general.The first paper examines the effects of IKEA on retail revenues and employment in the municipalities that IKEA chose to enter between 2000 and 2011; Gothenburg, Haparanda, Kalmar and Karlstad. By means of a matching method we first identify non-entry municipalities that have a similar probability of IKEA entry as the true entry municipalities. Then, using these non-entry municipalities as a control group, the causal effects of IKEA entry can be estimated using a treatment-control approach. We also extend the analysis to examine the spatial impact of IKEA by estimating the effects on retail in neighboring municipalities. It is found that a new IKEA store increases revenues in durable goods trade with 20% in the entry municipality and the number of employees with 17%. Only small, and in most cases statistically insignificant, negative effects were found in neighboring municipalities.It appears that there is a positive net effect on durables retail sales and employment in the entry municipality. However, the analysis is based on data on an aggregated municipality level and thereby it remains unclear if and how the effects vary within the entry municipalities. In addition, the data used in the first study includes the sales and employment of IKEA itself, which could account for the majority of the increases in employment and retail. Thereby the potential spillover effects on incumbent retailers in the entry municipalities cannot be discerned in the first study.IIITo examine effects of IKEA entry on incumbent retail firms, the second paper in this thesis analyses how IKEA entry affects the revenues and employment of local retail firms in three municipalities; Haparanda, Kalmar and Karlstad, which experienced entry by IKEA between 2000 and 2010. In this second study, we exclude Gothenburg due to the fact that big-box entry appears to have weaker effects in metropolitan areas (as indicated by Artz & Stone 2006). By excluding Gothenburg we aim to reduce the geographical heterogeneity in our study. We obtain control municipalities that are as similar as possible to the three entry municipalities using the same method as in the previous study, but including a slightly different set of variables in the selection equation. Using similar retail firms in the control municipalities as our comparison group, we estimate the impact of IKEA entry on revenues and employment for retail firms located at varying distances from the IKEA entry site.The results generated in this study imply that entry by IKEA increases revenues in incumbent retail firms by, on average, 11% in the entry municipalities. In addition, we do not find any significant impact on retail revenues in the city centers of the entry municipalities. However, we do find that retail firms within 1 km of the IKEA experience increases in revenues of about 26%, which indicates large spillover effects in the area nearby the entry site. As expected, this impact decreases as we expand the buffer zone: firms located between 0-2 km experiences a 14% increase and firms in 2-5 km experiences an increase of 10%. We do not find any significant impacts on retail employment.

Influência do método de filetagem e categorias de peso sobre rendimento de carcaça, filé e pele da tilápia do Nilo (Oreochromis niloticus)

The objective of this study was to evaluate the processing methods (F-1 = to remove skin with pliers and then to cut in fillets; F-2 = cut in fillet and then to remove skin with knife and pliers help) and weight categories (W-1=250-300 g; W-2=301-350 g; W-3 = 351-400 g and W-4 = 401-450 g), on the carcass (CY), fillet (FY) and skin yield of Nile tilapia. Forty-eight fishes were used in a completely randomized design. There was effect for the processing method, being the F-1 mean (56.43 and 36.67 %) higher to the F-2 (53.46 and 32.89%) for CY and FY respectively. For the weight categories, W-1 (56.49 and 37.34%) and W-2 (56.34 and 36.40%) were superior as compared to W-3 (53.27 and 31.98%) and W-4 (53.71 and 33.42%), respectively for CY and FY. Crude skin percentage, clean and of fleshed were higher for F-2, but there was no effect for weight categories. The F-1 processing method promoted the best yield and skin results, and for the weight categories W-1 and W-2 higher yields.

Benzocaine and eugenol as anesthetics for Brycon hilarii

A utilização de produtos anestésicos durante práticas de manejo é frequentemente empregada, porém doses corretas de diferentes fármacos e para espécies distintas ainda estão em fases de pesquisa. O objetivo do estudo foi determinar a melhor concentração de benzocaína e eugenol para juvenis de piraputanga (B. hilarii). Foram utilizados 104 juvenis de piraputanga com peso médio de 50,04 ± 20,80 g e comprimento total médio de 16,30 ± 12,32 cm adquiridos em uma piscicultura comercial localizada na região Oeste do Estado do Paraná. O trabalho foi conduzido no Laboratório de Aquicultura do Grupo de Estudos de Manejo na Aquicultura - GEMAq da Universidade Estadual do Oeste do Paraná (UNIOESTE). Os animais foram submetidos a cinco concentrações de benzocaína (50,0; 100,0; 150,0; 200,0 e 250,0 mg L-1) e sete concentrações de eugenol (50,0; 100,0; 150,0; 200,0; 250,0; 300,0 e 350 mg L-1), para a aferição dos tempos referentes à letargia. Para a recuperação, os animais foram mantidos em aquários livre do anestésico e observado o tempo em que retornaram às atividades normais. A melhor dose de benzocaína verificada foi de 100 mg L-1, enquanto a melhor dose de eugenol foi entre 100 e 150 mg L-1.

Impacto de quatro substratos e parcelamento da fertirrigação na produção de tomate sob cultivo protegido

Analisou-se a produção do tomateiro, híbrido longa vida Carmen, cultivado em quatro substratos, com fertirrigação semanal e duas vezes por semana. O delineamento experimental utilizado foi blocos casualizados, em esquema fatorial 4 x 2 (quatro substratos e duas formas de fertirrigação), em quatro repetições. Os substratos testados foram: S1 = areia fina (0,250 - 0,105 mm); S2 = 1/2 areia fina + 1/2 bagaço de cana-de-açúcar; S3 = 1/2 areia fina + 1/2 casca de amendoim moída (passada em peneira com abertura de 7 x 18 mm) e S4 = 1/3 areia fina + 1/3 bagaço de cana-de-açúcar + 1/3 casca de amendoim moída. As fertirrigações avaliadas foram: F1 = fertirrigação realizada uma vez por semana, com aplicação da quantidade total de nutrientes e, F2 = fertirrigação realizada duas vezes por semana, com aplicação da metade da quantidade total de nutrientes, demandada por semana, em cada vez. A quantidade de nutrientes, em mg L-1, fornecida por meio de fertirrigação, foi: 200 de nitrogênio, 60 de fósforo, 350 de potássio, 206 de cálcio, 60 de magnésio, 150 de enxofre, 0,50 de boro, 0,10 de cobre, 2 de ferro, 0,75 de manganês, 0,10 de zinco e 0,01 de molibdênio. A dotação hídrica foi realizada em função dos dados obtidos em um tanque classe A, localizado no centro da casa de vegetação. Avaliou-se a altura das plantas, o número de cachos e de frutos por planta, o peso individual do fruto e a produção por planta. Os dados foram submetidos à análise de variância e as médias foram comparadas pelo teste de Tukey, ao nível de 5% de probabilidade. Verificou-se que a fertirrigação realizada duas vezes por semana, suprindo a demanda total de nutrientes da semana, resultou em consideráveis melhorias de produção. Os substratos utilizados, com exceção do substrato S2, apresentaram potencial de uso para o cultivo do tomateiro em ambiente protegido.

Desempenho da colhedora de milho Penha CLM-350: parte I - sistema espigador

Com o propósito de avaliar a colhedora Penha CLM-350, visando fornecer subsídios aos projetos e usuários, realizou-se o presente trabalho, onde foi estudada a eficácia do sistema espigador, determinando-se a porcentagem de milho colhido para os diversos tratamentos estudados. Definiu-se um parâmetro adimensional U, que é a relação entre a velocidade periférica dos roletes e a velocidade de deslocamento da colhedora. Procurou-se relacionar as diversos tratamentos U, com os valores percentuais de grãos de milho colhidos e perdidos no solo. Os resultados foram estudados através da análise de variância, empregando-se o teste F, aos níveis de 1% e 5% de probabilidade e o teste Tukey para a comparação estatística entre as médias.

Reguladores vegetais na quebra da dominância apical de mamoeiro (Carica papaya L.)

O trabalho avaliou os efeitos de reguladores vegetais sobre a quebra da dominância apical de mamoeiro (Carica papaya L. cv. Improved Sunrise Solo). A aplicação dos reguladores vegetais foi iniciada quando as plantas tinham seis meses de idade, totalizando três aplicações, a intervalos de sete dias, constando dos seguintes tratamentos: T1- água (testemunha); T2- GA3 250 mg L-1; T3- GA3 500 mg L-1; T4- benziladenina (BA) 250 mg L-1; T5- BA 500 mg L-1; T6- GA3 125 mg L-1 + BA 125 mg L-1; T7- GA3 250 mg L-1 + BA 250 mg L-1. Esses tratamentos foram acompanhados da remoção ou não da gema apical. Os resultados mostraram que plantas tratadas com GA3 + BA a 125 e 250 mg L-1, com e sem a remoção da gema apical, apresentaram maior número de brotações que a testemunha, a qual não apresentou nenhuma brotação das gemas laterais.

Seletividade de herbicidas aplicados nas gramas Santo Agostinho e Esmeralda

Objetivou-se neste trabalho avaliar a seletividade de herbicidas aplicados nas gramas Santo Agostinho (Stenotaphrum secundatum) e Esmeralda (Zoysia japonica) em condições de campo. O delineamento experimental utilizado foi o de blocos casualizados, com quatro repetições. As gramas foram cortadas a 3 cm de altura e, em seguida, foram feitas as aplicações dos herbicidas. Os tratamentos utilizados foram: testemunha sem aplicação, fluazifop-p-butil (125 g ha-1), sethoxydim+óleo mineral (276 g ha-1 + 0,5% v v-1 de Assist), bispyribac-sodium (25 g ha-1), chlorimuron-ethyl (15 g ha-1), ethoxysulfuron (150 g ha-1), halosulfuron (112,5 g ha-1), iodosulfuron-methyl (10 g ha-1), metsulfuron-methyl (2,4 g ha-1), nicosulfuron (125 g ha-1), pyrithiobac-sodium (140 g ha-1), trifloxysulfuron-sodium (22,5 g ha-1), 2,4-D (720 g ha-1), quinclorac (375 g ha-1), atrazina (1.250 g ha-1), bentazon (600 g ha-1), linuron (1.350 g ha-1), fomesafen (187,5 g ha-1), lactofen (120 g ha-1), oxadiazon (600 g ha-1) e oxyfluorfen (720 g ha-1). Os herbicidas que apresentaram potencial de seletividade para o gramado de S. secundatum foram: os inibidores da ALS chlorimuron-ethyl, ethoxysulfuron, halosulfuron, iodosulfuron-methyl e metsulfuron-methyl, o mimetizador de auxina 2,4-D, os inibidores do fotossistema II atrazina e bentazon, bem como os inibidores da Protox fomesafen, lactofen e o oxadiazon. Para o gramado de Z. japonica, os herbicidas que apresentaram potencial de seletividade foram: os inibidores da ALS chlorimuron-ethyl, ethoxysulfuron, halosulfuron, metsulfuron-methyl e nicosulfuron, os mimetizadores de auxina 2,4-D e quinclorac, os inibidores do fotossistema II atrazina e bentazon, além dos inibidores da Protox fomesafen, lactofen e o oxadiazon.