892 resultados para åk 4-6


Relevância:

90.00% 90.00%

Publicador:

Resumo:

Self catalytic growth of Indium Oxide (In2O3) nanowires (NWs) have been grown by resistive thermal evaporation of Indium (In) in the presence of oxygen without use of any additional metal catalyst. Nanowires growth took place at low substrate temperature of 370-420 degrees C at an applied current of 180-200 A to the evaporation boat. Morphology, microstructures, and compositional studies of the grown nanowires were performed by employing field emission scanning electron microscopy (FESEM), X-Ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) respectively. Nanowires were uniformly grown over the entire Si substrate and each of the nanowire is capped with a catalyst particle at their end. X-ray diffraction study reveals the crystalline nature of the grown nanowires. Transmission electron microscopy study on the nanowires further confirmed the single crystalline nature of the nanowires. Energy dispersive X-ray analysis on the nanowires and capped nanoparticle confirmed that Indium act as catalyst for In2O3 nanowires growth. A self catalytic Vapor-Liquid-Solid (VLS) growth mechanism was responsible for the growth of In2O3 nanowires. Effect of oxygen partial pressure variation and variation of applied currents to the evaporation boat on the nanowires growth was systematically studied. These studies concluded that at oxygen partial pressure in the range of 4 x 10(-4), 6 x 10(-4) mbar at applied currents to the evaporation boat of 180-200 A were the best conditions for good nanowires growth. Finally, we observed another mode of VLS growth along with the standard VLS growth mode for In2O3 nanowires similar to the growth mechanism reported for GaAs nanowires.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Ferrocene-conjugated copper(II) complexes Cu(Fc-aa)(aip)](ClO4) (1-3) and (Cu(Fc-aa)(pyip)](ClO4) (4-6) of L-amino acid reduced Schiff bases (Fc-aa), 2-(9-anthryl)-1H-imidazo4,5-f]1,10]phenanthroline (aip) and 2-(1-pyrenyl)-1H-imidazo4,5-f] 1,10]phenanthroline (pyip), where Fc-aa is ferrocenylmethyl-L-tyrosine (Fc-Tyr in 1, 4), ferrocenylmethyl-L-tryptophan (Fc-Trp in 2, 5) and ferrocenylmethyl-L-methionine (Fc-Met in 3, 6), were prepared and characterized, and their photocytotoxicity was studied (Fc = ferrocenyl moiety). Phenyl analogues, viz. (Cu(Ph-Met)(aip)](ClO4) (7) and (Cu(Ph-Met)(pyip)](ClO4) (8), were prepared and used as control compounds. The bis-imidazophenanthroline copper(II) complexes, viz. (Cu(aip)(2)(NO3)](NO3) (9) and Cu(pyip)(2)(NO3)](NO3) (10), were also prepared and used as controls. Complexes 1-6 having a redox inactive cooper(II) center showed the Fc(+)-Fc redox couple at similar to 0.5 V vs. SCE in DMF-0.1 mol (Bu4N)-N-n](ClO4). The copper(II)-based d-d band was observed near 600 nm in DMF-Tris-HCl buffer (1 :1 v/v). The ferrocenyl complexes showed low dark toxicity, but remarkably high photocytotoxicity in human cervical HeLa and human breast adenocarcinoma MCF-7 cancer cells giving an excellent photo-dynamic effect while their phenyl analogues were inactive. The photo-exposure caused significant morphological changes in the cancer cells when compared to the non-irradiated ones. The photophysical processes were rationalized from the theoretical studies. Fluorescence microscopic images showed 3 and 6 localizing predominantly in the endoplasmic reticulum (ER) of the cancer cells, thus minimizing any undesirable effects involving nuclear DNA.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

In present work, a systematic study has been carried out to understand the influence of source concentration on structural and optical properties of the SnO2 nanoparticles. SnO2 nanoparticles have been prepared by using chemical precipitation method at room temperature with aqueous ammonia as a stabilizing agent. X-ray diffraction analysis reveals that SnO2 nanoparticles exhibit tetragonal structure and the particle size is in range of 4.9-7.6 nm. High resolution transmission electron microscopic image shows that all the particles are nearly spherical in nature and particle size lies in range of 4.6-7 nm. Compositional analysis indicates the presence of Sn and O in samples. Blue shift has been observed in optical absorption spectra due to quantum confinement and the bandgap is in range of 4-4.16 eV. The origin of photoluminescence in SnO2 is found to be due to recombination of electrons in singly occupied oxygen vacancies with photo-excited holes in valance band.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Two isomorphous submicron sized metal-organic network compounds, Y-2(PDA)(3)(H2O)1]center dot 2H(2)O (PDA = 1,4-phenylenediacetate), 1 and Y1.8Tb0.2(PDA)(3)(H2O)1]center dot 2H(2)O, Tb@1 have been synthesized by employing solvent assisted liquid grinding followed by heating at 180 degrees C for 1' min and washing with water. Single crystal X-ray data of bulk 1 confirmed a three dimensional porous structure. The structure and morphology of 1 and Tb@1 were systematically characterized by PXRD, TGA, DSC, IR, SEM and EDX analysis. Dehydrated Tb@1 Tb@1'] shows a high intense visible green emission upon exposure to UV light. The green emission of Tb@1' was used for the detection of nitro explosives, such as 2,4,6-trinitrophenol (TNP), 1,3-dinitro benzene (DNB), 2,4-dinitro toluene (DNT), nitro benzene (NB), and 4-nitro toluene (NT) in acetonitrile. The results show that the emission intensity of dehydrated Tb@1' can be quenched by all the nitro analytes used in the present work. Remarkably, Tb@1' exhibited a high efficiency for TNP, DNB and DNT detection with K-SV K-SV = quenching constant based on linear Stern-Volmer plot] values of 70 920, 44 000 and 35 430 M-1, respectively, which are the highest values amongst known metal-organic materials. Using this material submicromolar level (equivalent to 0.18 ppm), a detection of nitro explosives has been achieved.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Six new mixed-ligand cobalt(III) complexes of formulation Co(N-N)(2)(O-O)](ClO4)(2) (1-6), where N-N is a N,N-donor phenanthroline base, namely, 1,10-phenanthroline (phen in 1, 2), dipyrido3,2-d:2',3'-f] quinoxaline (dpq in 3, 4), and dipyrido3,2-a:2',3'-c]phenazine (dppz in 5, 6), O-O is acetylacetonate (acac in 1, 3, 5) or curcumin (bis(4-hydroxy-3-methoxyphenyl)-1,6-diene-3,5-dione, cur in 2, 4, 6), have been synthesized and characterized. The X-ray crystal structures of complex 1 (as PF6- salt, 1a) and 3 show distorted octahedral geometries formed by the CoN4O2 core. The complexes 1, 3 and 5 having the simple acac ligand are prepared as control species to understand the role of curcumin. The optimized geometries and the frontier orbitals of the curcumin complexes 2, 4, and 6 are obtained from the DFT calculations. The complexes 2, 4, and 6 having the photoactive curcumin moiety display an absorption band in the visible region near 420 nm and show remarkable photocytotoxicity in HeLa cancer cells with respective IC50 values of 7.4 mu M, 5.1 mu M and 1.6 mu M while being much less toxic in dark. MTT assay using complex 6 shows that it is not significantly photocytotoxic to MCF-10A normal cells. The control complexes having the acac ligand are non-toxic both in the presence and absence of light. The cell death is apoptotic in nature and triggered by the photogeneration of reactive oxygen species. Fluorescence imaging experiments on HeLa cells reveals that complex 6 accumulated primarily inside the mitochondria. Human serum albumin (HSA) binding experiments show that the complexes bind HSA with good affinity, but 6 binds with the highest affinity, with a K-b value of 9.8 x 10(5) M-1. Thus, complex 6 with its negligible toxicity in the dark and in normal cells but remarkable toxicity in visible light holds significant photochemotherapeutic potential.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Phase variation (random ON/OFF switching) of gene expression is a common feature of host-adapted pathogenic bacteria. Phase variably expressed N-6-adenine DNA methyltransferases (Mod) alter global methylation patterns resulting in changes in gene expression. These systems constitute phase variable regulons called phasevarions. Neisseria meningitidis phasevarions regulate genes including virulence factors and vaccine candidates, and alter phenotypes including antibiotic resistance. The target site recognized by these Type III N-6-adenine DNA methyltransferases is not known. Single molecule, real-time (SMRT) methylome analysis was used to identify the recognition site for three key N. meningitidis methyltransferases: ModA11 (exemplified by M.NmeMC58I) (5'-CGY(m6)AG-3'), ModA12 (exemplified by M.Nme77I, M.Nme18I and M.Nme579II) (5'-AC(m6)ACC-3') and ModD1 (exemplified by M.Nme579I) (5'-CC(m6)AGC-3'). Restriction inhibition assays and mutagenesis confirmed the SMRT methylome analysis. The ModA11 site is complex and atypical and is dependent on the type of pyrimidine at the central position, in combination with the bases flanking the core recognition sequence 5'-CGY(m6)AG-3'. The observed efficiency of methylation in the modA11 strain (MC58) genome ranged from 4.6% at 5'-GCGC(m6)AGG-3' sites, to 100% at 5'-ACGT(m6)AGG-3' sites. Analysis of the distribution of modified sites in the respective genomes shows many cases of association with intergenic regions of genes with altered expression due to phasevarion switching.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

The structure of a new cysteine framework (-C-CC-C-C-C) ``M''-superfamily conotoxin, Mo3964, shows it to have a beta-sandwich structure that is stabilized by inter-sheet cross disulfide bonds. Mo3964 decreases outward K+ currents in rat dorsal root ganglion neurons and increases the reversal potential of the Na(V)1.2 channels. The structure of Mo3964 (PDB ID: 2MW7) is constructed from the disulfide connectivity pattern, i.e., 1-3, 2-5, and 4-6, that is hitherto undescribed for the ``M''-superfamily conotoxins. The tertiary structural fold has not been described for any of the known conus peptides. NOE (549), dihedral angle (84), and hydrogen bond (28) restraints, obtained by measurement of (h3)J(NC') scalar couplings, were used as input for structure calculation. The ensemble of structures showed a backbone root mean square deviation of 0.68 +/- 0.18 angstrom, with 87% and 13% of the backbone dihedral (phi, psi) angles lying in the most favored and additional allowed regions of the Ramachandran map. The conotoxin Mo3964 represents a new bioactive peptide fold that is stabilized by disulfide bonds and adds to the existing repertoire of scaffolds that can be used to design stable bioactive peptide molecules.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Lanthanide complexes Ln(DTPAAQ)(DMF)] (1-3) (Ln - Pr (1), Eu (2), Tb (3), H(3)DTPAAQ - N, N `'-bis(3-amidoquinolyl) diethylenetriamine-N, N', N `'-triacetic acid, DMF - N, N-dimethylformamide) were studied for their structures, photophysical properties, DNA and protein binding, DNA photocleavage, photocytotoxicity and cellular internalization. The crystal structures of complexes Ln(DTPAAQ)(DMF)] (1-3) display a discrete mononuclear nine-coordinate {LnN(3)O(6)} tricapped-trigonal prism (TTP) coordination geometry. The europium and terbium complexes show strong luminescence properties in the visible region having a long luminescence lifetime (tau = 0.51-0.64 ms). The conjugated 3-aminoquinoline moieties act as efficient light harvesting antennae, which upon photoexcitation transfer their energy to Eu(III) or Tb(III) for their characteristic D-5(0) -> F-7(J) or D-5(4) -> F-7(J) f-f transitions respectively. The complexes display efficient binding affinity to DNA (K-b = 3.4 x 10(4) - 9.8 x 10(4) M-1) and BSA (KBSA = 3.03 x 10(4) - 6.57 x 10(4) M-1). Europium and terbium complexes give enhanced luminescence upon interacting with CT-DNA suggesting possible luminescence-based sensing applications for these complexes. Complexes 1-3 show moderate cleavage of supercoiled (SC) DNA to its nicked circular (NC) form on exposure to UV-A light of 312 nm involving formation of singlet oxygen (O-1(2)) and hydroxyl radicals (cOH) in type-II and photoredox pathways. Eu(III) and Tb(III) complexes exhibit remarkable photocytotoxicity with human cervical cancer cell line (HeLa) (IC50 = 20.7-28.5 mM) while remaining essentially noncytotoxic up to 150 mM in the dark. Complexes are nontoxic in nature thus suitable for designing cellular imaging agents. Fluorescence microscopy data reveal primarily cytosolic localization of the Eu(III) and Tb(III) complexes in HeLa cells.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

This study reports the synthesis and photophysical properties of a star-shaped, novel, fluoranthene-tetraphenylethene (TFPE) conjugated luminogen, which exhibits aggregation-induced blue-shifted emission (AIBSE). The bulky fluoranthene units at the periphery prevent intramolecular rotation (IMR) of phenyl rings and induces a blueshift with enhanced emission. The AIBSE phenomenon was investigated by solvatochromic and temperature-dependent emission studies. Nanoaggregates of TFPE, formed by varying the water/THF ratio, were investigated by SEM and TEM and correlated with optical properties. The TFPE conjugate was found to be a promising fluorescent probe towards the detection of nitroaromatic compounds (NACs), especially for 2,4,6-trinitrophenol (PA) with high sensitivity and a high Stern-Volmer quenching constant. The study reveals that nanoaggregates of TFPE formed at 30 and 70% water in THF showed unprecedented sensitivity with detection limits of 0.8 and 0.5ppb, respectively. The nanoaggregates formed at water fractions of 30 and 70% exhibit high Stern-Volmer constants (K-sv=79998 and 51120m(-1), respectively) towards PA. Fluorescence quenching is ascribed to photoinduced electron transfer between TFPE and NACs with a static quenching mechanism. Test strips coated with TFPE luminogen demonstrate fast and ultra-low-level detection of PA for real-time field analysis.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

En el período comprendido del23 de Septiembre de 1996 al 8 de enero de 1997, en los terrenos de la Empresa Agropecuaria Guadalupe, ubicada en el municipio de Malacatoya, Departamento de Granada, se realizó el presente ensayo con el propósito de evaluar los componentes de crecimiento, rendimiento (kg/ha) y calidad industrial de 7 líneas promisorias de arroz (Oryza sativa L) en el sistema de inundación. Los tratamientos en estudios se establecieron en un diseño Unifactorial de Bloques Completo al azar (B.C.A), con cuatro repeticiones. La evaluación de los datos obtenidos de las variables en estudios se efectúo mediante el sistema de evaluación estándar para arroz, Análisis de Varianza (ANDEVA) y separación de medios rangos múltiples de Duncan al 95 % de confiabilidad. Los resultados obtenidos muestran que la línea CT 9841-5-2-1p-21-21-M presentó la floración más temprana; en la aplicación de la escala de evaluación de exerción de la panícula los tratamientos que presentaron buena excersion fueron las Líneas CT 9882-2-M-14-1-M-1-3p-M-1, CT 10166-16-1-2p-1-3 y la línea CT 10175-4-6- 2p-2-2; la mayor resistencia al desgrane la obtuvieron las Líneas CT 10308-27-3-3p-3-3 CT 9682-2-M-14-1-M-1-3p-M-1 y variedad testigo; las líneas que presentaron tallos fuertes y sin volcamiento fueron: CT 10175-4-6-2p-2-2 y CT 9841-5-2-1p-21-21-M y la variedad testigo Oryzica llanos 4; los tratamientos CT 9682-2-M-14-1-M-1-3p-M-1, CT 10175-4-6-2p-2-2 y CT 9841-5-2-1p-21-21-M, la línea CT 10184-2-1-M-1-MI y la variedad Oryzica Llanos 4 presentaron buena aceptabilidad fenotípica. El mayor rendimiento de grano se obtuvo con la línea CT 10184-2-1-M-1-MI, con 4,034.14 kglha, y la menor producción se alcanzó con el tratamiento CT 9841-5-2-1p-21-21-M y sin diferencias significativas con la variedad testigo Oryzica llanos 4 (2,393.76 y 2,444.66 kglha respectivamente). En cuanto a rendimiento y calidad industrial todas las líneas se comportaron de manera similar destacándose la línea (IR-44624-127-1-2-2-3) y la variedad testigo Oryzica Llanos-4

Relevância:

90.00% 90.00%

Publicador:

Resumo:

全书以命令行方式通过大量教学实例和工程应用实例,介绍了建立模型、求解和结果后处理的全过程。

目 录

前言

第1篇教学实例篇

第1章简单拉压杆结构

1.1铰接杆在外力作用下的变形

1.2人字形屋架的静力分析

1.3超静定拉压杆的反力计算

1.4平行杆件与刚性梁连接的热应力问题

1.5端部有间隙的杆的热膨胀

第2章梁的弯曲问题

2.1等截面简单超静定梁的平面弯曲分析

2.2工字形截面外伸梁的平面弯曲

2.3矩形截面梁的纵横弯曲分析

2.4悬臂梁的双向弯曲

2.5 圆形截面悬臂杆的弯扭组合变形

2.6悬臂等强度梁的弯曲

2.7弹性地基半无限长梁在端部力和力偶作用下的变形

2.8偏心受压杆的大变形分析

第3章杆系稳定性计算

3.1利用梁单元计算压杆稳定性

3.2利用实体单元计算压杆稳定性

3.3悬臂压杆的过曲屈分析

3.4平面钢架的平面外失稳

第4章实体模型应力分析

4.1 均布荷载作用下深梁的变形和应力

4.2一对集中力作用下的圆环

4.3用实体单元分析变截面杆的拉伸

4.4用二维实体单元分析等截面悬臂梁的平面弯曲

4.5变截面悬臂梁在端部集中力作用下的平面静力分析

4.6纯弯曲悬臂曲梁的二维静力分析

4.7端部集中力作用的悬臂圆环曲梁平面弯曲的三维分析

4.8均匀拉力作用下含圆孔板的孔边应力集中

4.9两端固定的厚壁管道在自重作用下的变形和应力

第5章膜和薄壳问题

5.1含椭圆孔的椭圆薄膜在外部张力作用下的静力分析

5.2圆形薄膜大变形静力分析

5.3柱形容器在内压作用下的静力分析

5.4圆柱形薄壳在均匀内压作用下的静力分析

第6章板的弯曲和壳体计算

6.1简支和固支圆板的在不同荷载作用下的弯曲

6.2悬臂长板的大挠度弯曲

6.3用壳体单元分析受均布荷载作用的固支圆板大挠度弯曲

6.4利用拉伸操作建立膨胀弯管模型

6.5两端简支开口柱壳在自重作用下的静力分析

6.6圆筒在一对横向集中力作用下的变形

6.7两边简支开口柱壳在集中力作用下的大变形曲屈

第7章简单振动系统

7.1单自由度弹簧质量系统的频率计算

7.2悬索自由振动的频率

7.3用弹簧单元连接的圆盘的扭转振动

7.4圆杆连接圆盘的扭转振动

7.5钻杆的扭转自由振动

第8章梁的振动分析

8.1简支梁的自振频率计算

8.2 自由―自由梁的纵向自由振动

8.3有轴向压力作用的简支梁的自由振动

8.4用壳体单元计算悬臂等强度梁的自由振动

8.5矩形截面薄壁悬臂梁的自由振动

第9章膜板和实体振动

9.1 圆形张紧薄膜的自由振动

9.2薄膜二维非轴对称自由振动分析

9.3薄膜三维非轴对称振动分析

9.4悬臂长板的自由振动频率

9.5悬臂宽板的模态分析

9.6固支圆板的自由振动

9.7用实体单元分析圆环的振动

9.8机翼模型的振动分析

第1 0章平面建模分析和三维实体建模

10.1 带三个圆孔的平面支座分析

10.2角支座应力分析

10.3 体斜支座的实体建模

10.4四分之一车轮的实体建模

10.5轴承支座的实体建模

第1 1章最优化设计

11.1概述

11.2最优化问题框架

11.3 ANSYS优化设计流程

11.4变截面悬臂梁的外形形状优化

11.5平面刚架的优化设计

第12章层合板和断裂力学

12.1 四边简支方形层合板在均布外载作用下的变形

12.2均布拉力作用下含裂纹板的应力强度因子计算

第2篇工程应用篇

第13章用APDL实现空间网壳结构参数化建模

13.1 K系列球面网壳结构的特点和建模

13.1.1 K系列球面网壳的特点

13.1.2几何描述

13.1.3杆件连接关系

13.2参数化设计语言APDL介绍

13.2.1参数和表达式

13.2.2 ANSYS 中的基本指令

13.2.3分支和循环

13.3用户界面设计语言UIDL介绍

13.3.1 单行参数输入

13.3.2多行参数输入

13.4网壳建模程序设计

13.4.1模型建立的步骤

13.4.2节点坐标计算

13.4.3单元连接

13.4.4变量说明

13.4.5节点坐标计算公式

13.4.6主框图说明

13.4.7单元连接关系定义

13.4.8源程序

13.5程序使用说明

13.5.1加载程序

13.5.2界面说明

13.5.3注意事项

13.6应用举例

13.6.1基本参数

13.6.2输入数据并生成模型

13.6.3输入单元参数和荷载后开始计算

13.6.4选择结果输出方式

第14章塔式起重机静动力分析

14.1塔式起重机基本概念

14.2塔式起重机拓扑模型

14.3塔机模型受力分析

14.3.1部件受力特征分析

14.3.2截面参数定义

14.3.3自重荷载和配重

14.3.4选用合适的分析模型。

14.3.5 固定塔身底部的4个节点

14.4塔机建模程序设计

14.4.1塔身节点计算和单元连接

14.4.2塔顶建模

14.4.3塔臂建模

14.4.4平衡臂和斜拉索建模

14.5塔机静力分析

14.6塔机模态分析

14.7塔机静动力分析程序

第15章长柱形天然气罐在内压作用下的静力分析

15.1概述

15.2建立模型

15.3利用轴对称壳单元SHELL51计算

15.3.1单元基本性质和约定

15.3.2求解过程

15.3.3源程序

15.3.4计算结果

15.3.5简体部分理论解

15.3.6结果讨论

15.4利用8节点2D实体单元PLANE82单元计算

15.4.1建立模型

15.4.2计算过程

15.4.3计算结果及讨论

15.4.4源程序

15.5用20节点3D实体单元solid95计算1/4模型

15.5.1建立1/4三维模型

15.5.2计算步骤

15.5.3计算结果分析

15.5.4与弹性力学解答的对比

15.5.5计算程序

附录

附录A常用结构单元参考

附录B结构分析命令速查

参考文献

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Three types of prototype (Lege) traps with different numbers of entrance valves were evaluated in River Rima, north western Nigeria. The traps contained 4,6 and 8 valves, tagged 4-V, 6-V and 8-V respectively. The experiment was carried out in a randomized complete block design with one factor each replicated three times. Data collected on fish diversity, number biomass and sizes were subjected to descriptive statistics and analysis of variance. The results of the catch composition showed close diversity index of 0.86 for 6-V, 0.80 for 8-V and 0.60 for 4-V Lege traps. However, the number (41%) and biomass 48%) of fish caught in the 6-V Lege trap were significantly (P0.05) higher than those caught in the other traps. There was no definite trend in the sizes (length and girth) of fish caught in the traps. On the basis of species diversity, and the number and biomass of fish caught, the 6-V Lege showed preference for adoption than the other two traps. However, further studies are recommended on the appropriate mesh size net for the trap in line with the provisions of fisheries edicts

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Three types of prototype (Lege) traps with different numbers of entrance valves were evaluated in River Rima, north western Nigeria. The traps contained 4,6 and 8 valves, tagged 4-V, 6-V and 8-V respectively. The experiment was carried out in a randomized complete block design with one factor each replicated three times. Data collected on fish diversity, number, biomass and sizes were subjected to descriptive statistics and analysis of variance. The results of the catch composition showed close diversity index of 0.86 for 6-V, 0.80 for 8-V and 0.60 for 4-V Lege traps. However, the number (41%) and biomass (48%) of fish caught in the 6-V Lege trap were significantly (P<0.05) higher than those caught in the other traps. There was no definite trend in the sizes (length and girth) of fish caught in the traps. On the basis of species diversity, and the number and biomass of fish caught, the 6-V Lege showed preference for adoption than the other two traps. However, further studies are recommended on the appropriate mesh size net for the trap in line with the provisions of fisheries edicts