Changes in Photosynthesis and Oxidative Stress in Wheat Plants Submmited to Herbicides Application

The use of herbicides, even in tolerant crops, can cause stress evidenced by increase phytotoxicity affecting growth and development. The objectives of this study were to evaluate herbicides effect from different mechanisms of action in photosynthetic and oxidative stress parameters, as well visual phytotoxicity and wild radish control in wheat crop, cultivar Quartzo. Two trials were conducted where the first one evaluated the photosynthetic parameters on wheat plants in two seasons collection, following the application of herbicides bentazon, clodinafop, iodosulfuron, metribuzin, metsulfuron and 2,4-D; and the second one evaluated wild radish (Raphanus sativus) control, wheat phytotoxicity and yield due to bentazon, iodosulfuron, metribuzin, metsulfuron and 2,4-D herbicides application. Photosynthetic rate, stomatal conductance and transpiration were negatively affected by metribuzin, metsulfuron and 2,4-D herbicides at 24 and 120 HAS (hours after spraying) compared to control. Oxidative stress was similar or lower to control, when herbicide was applied and, in general, there was no difference between application times. Lipid peroxidation, catalase activity and phenols were higher in the first collection time. The application of herbicides iodosulfuron and 2,4-D reduces chlorophylls and carotenoids in wheat. Herbicides bentazon, iodosulfuron, metribuzin, metsulfuron and 2,4-D are selective to wheat, cultivar Quartzo and do not affect wheat yield. 2,4-D, metribuzin and iodosulfuron are more efficient for wild radish control.

Phytotoxic Activity of Parthenium Against Wheat and Canola Differ With Plant Parts and Bioassays Techniques

Phytotoxic effects of invasive weed Parthenium hysterophorus were studied by using whole plant, leaf and root aqueous extracts at 0, 2.5, 5.0, 7.5 and 10% (w/v) concentrations against germination and early seedling growth of wheat and canola. Studies were carried out both in Petri plates with filter paper as substratum placed in controlled conditions and soil-filled plastic pots placed in open environments. Pronounced variation was noted for phytotoxic activity of different plant parts of parthenium, aqueous extract concentrations, test species, and bioassay techniques. Aqueous parthenium extracts either inhibited or delayed the germination and suppressed seedling growth of test species over control. For both test species, all the germination attributes were suppressed to a greater extent in Petri plates than in plastic pots. Leaf extracts were more suppressive to germination of test species than whole plant and root extracts. Increasing extract concentration beyond 2.5% caused significant reduction in seedling dry biomass of both test species. Aqueous parthenium extract diminished chlorophyll contents of wheat and canola by 32-63% and 29 69%, respectively. Nevertheless, an increase of 9-172% and 22-60% in phenolic contents of wheat and canola was recorded. Canola appeared to be more susceptible than wheat at all extract concentrations. Present study concluded that bioassays conducted under controlled condition using filter paper as substratum may be misleading due to over estimation of allelopathic response and variation in potential of receiver and donor species. Furthermore, it implies that threshold concentrations of allelochemicals for test species in Petri plates are rarely reached under field conditions.

Wheat Yield Loss in a Two Species Competition with Emex australis and Emex spinosa

Emex australis and E. spinosa are significant weed species in wheat and other crops. Information on the extent of competition of the Emex species will be helpful to access yield losses in wheat. Field experiments were conducted to quantify the interference of tested weed densities each as single or mixture of both at 1:1 on their growth and yield, wheat yield components and wheat grain yield losses in two consecutive years. Dry weight of both weed species increased from 3-6 g m-2 with every additional plant of weed, whereas seed number and weight per plant decreased with increasing density of either weed. Both weed species caused considerable decrease in yield components like spike bearing tillers, number of grains per spike, 1000-grain weight of wheat with increasing density population of the weeds. Based on non-linear hyperbolic regression model equation, maximum yield loss at asymptotic weed density was estimated to be 44 and 62% with E. australis, 56 and 70% with E. spinosa and 63 and 72% with mixture of both species at 1:1 during both year of study, respectively. It was concluded that E. spinosa has more competition effects on wheat crop as compared to E. australis.

The Effect of Plant Closures on Market Value: Empirical Evidence from Pulp and Paper Industry 2004-2012

The aim of this study was to research how plant closure announcements affect the market value of the largest pulp and paper industry companies in the world. Also the effect of announcements on competitors was researched and whether the location of plants, timing, reasons for the closures, and characteristics of the closing firms and competitors have an impact on the results. The overall sample included 57 events in the years 2004-2012 and event study was used as a research method. Main theories were signaling theory and spillover effect. According to empirical results, investors consider plant closure announcements as a positive signal for market value. The spillover effect on competitors was, on average, positive and characteristics of the firms and closures had an effect on the results. Furthermore, the market generally predicted the closures and overreacted to them on the announcement day and after it. It is possible for corporate management and investors to learn from the results and use them as support for their decision making.

Callus induction and plant regeneration by Brazilian triticale and wheat genotypes

In order to determine the in vitro behavior of Brazilian triticale, 16 triticale genotypes, and three wheat genotypes used as checks, were sown in June 1994. The explants used were immature embryos. In addition to the genotype tests, two culture media for callus induction were also evaluated, i.e., MS (Murashige and Skoog, Physiol. Plant. 15: 473-497, 1962) medium containing 2.0 mg 2,4D/l, and MS medium containing 4.0 mg 2,4D/l. The plant regeneration protocol used was the one employed at the Laboratório de Cultura de Tecidos, Departamento de Plantas de Lavoura, Universidade Federal do Rio Grande do Sul, for wheat. Differences in plant regeneration were observed both among triticale and wheat genotypes, with triticale usually showing better regeneration than wheat. No differences were observed between the callus induction media.

Chromosome studies in southern Brazilian wheat pest aphids Sitobion avenae, Schizaphis graminum, and Methopolophium dirhodum (Homoptera: Aphididae)

We examined the chromosome set of the aphid species Sitobion avenae, Schizaphis graminum and Methopolophium dirhodum by means of conventional staining and C, NOR, AluI and HaeIII banding methods. These species are considered important pests to several plants of economic interest in Brazil. No variation was observed in the number of chromosomes of S. avenae, whereas there was intraspecific variation in the other two species. Interspecific differences in the response to the banding treatments were observed. Whereas these techniques allowed the identification of several S. graminum chromosome pairs, only the AluI treatment was capable of inducing differential staining in the M. dirhodum chromosomes and no clear patterns emerged when the S. avenae preparations were treated

Two point deterministic model for acquisition of in vitro pollen grain androgenetic capacity based on wheat studies

This article discusses, from the standpoint of cellular biology, the deterministic and indeterministic androgenesis theories. The role of the vacuole and of various types of stresses on deviation of the microspore from normal development and the point where androgenetic competence is acquired are examined. Based on extensive literature review and data on wheat studies from our laboratory, a model for androgenetic capacity of pollen grain is proposed. A two point deterministic model for in vitro androgenesis is our proposal for acquisition of androgenetic potential of the pollen grain: the first switch point would be early meiosis and the second switch point the uninucleate pollen stage, because the elimination of cytoplasmatic sporophytic determinants takes place at those two strategic moments. Any abnormality in this process allowing the maintenance of sporophytic informational molecules results in the absence of establishment of a gametophytic program, allowing the reactivation of the embryogenic process

Genetics of resistance to the fungus Helminthosporium sativum in wheat: use of culture filtrates in tissue culture

Six wheat genotypes and their F1 and F2 generations were exposed to the action of Helminthosporium sativum culture filtrates to examine the genetics of hexaploid wheat resistance. The objective was to improve the efficiency of breeding programs by identifying the action and number of genes involved in the resistance. The varied response of the tested genotypes to the culture filtrates allowed division of the genotypes into four groups: resistant, moderately resistant, moderately susceptible and susceptible. This variability was detected in the progeny, suggesting that the parents have distinct genetic constitutions. Additive gene action predominated and genetic gain was shown to be possible through selection. The genetic control of the resistance trait seems to be complex because of the presence of gene interaction and the difficulty of eliminating the environmental effects. The inheritance seems to be oligogenic

Correlation between high molecular weight gluten subunits composition and bread-making quality in Brazilian wheat

Bread-making quality is one of the most important targets in the genetic improvement of wheat. Although extensive analyses of quality traits such as farinography, sodium dodecyl sulfate (SDS) sedimentation, alveography, and baking are made in breeding programs, these analyses require high amounts of seeds which are obtained only in late generations. In this experiment the statistical correlations between the high molecular weight subunit of glutenin and bread-making quality measured by alveograph, farinograph and SDS sedimentation were evaluated. Seventeen wheat genotypes were grown under the same conditions, each producing about 1 kg of seeds for the evaluations. The high molecular weight (HMW) glutenin subunits were analyzed by SDS-PAGE. Statistical correlations were highly significant between HMW glutenin subunits and alveograph and SDS sedimentation. These results indicate the possibility of manipulating major genes for wheat seed quality by coupling traditional breeding with non-destructive single seed analysis. Only half seed is necessary to perform the SDS-PAGE analysis. Therefore, the other half seed can be planted to generate the progeny. Seed yield and SDS sedimentation were statistically correlated, indicating the possibility of simultaneous selection for both traits

Wheat bran- but not oat bran-enriched diets increase the mucosal height of the cecum and colon of newly weaned and aged rats

The effect of diets enriched with oat or wheat bran (prepared by the addition of 300 g of each fiber to 1000 g of the regular diet), given for 8 weeks, on the mucosal height of the colon and cecum was investigated. Newly weaned (21 days old) and aged (12 months old) male Wistar rats were used in this study. As compared to controls, diets enriched with wheat bran provoked a significant increase in the mucosal height, whereas oat bran did not cause any effect. In newly weaned rats (21 days old), wheat bran increased the mucosal height (µm) in the cecum by 20% (mean ± SEM for 8 rats; 169.1 ± 5.2 and 202.9 ± 8.0 for control and wheat bran, respectively) and in the colon (218.8 ± 7.2 and 264.5 ± 18.8 for control and wheat bran, respectively). A similar effect was observed in aged rats (12 months old), with an increase of 15% in the mucosal height (µm) of the cecum (mean ± SEM of 8 rats; 193.2 ± 8.6 and 223.7 ± 8.3 for control and wheat bran, respectively) and of 17% in the colon (300.4 ± 9.2 and 352.2 ± 15.9 for control and wheat bran, respectively)

Hydrolysis of xylans by enzyme systems from solid cultures of Trichoderma harzianum strains

Xylanase activity was isolated from crude extracts of Trichoderma harzianum strains C and 4 grown at 28oC in a solid medium containing wheat bran as the carbon source. Enzyme activity was demonstrable in the permeate after ultrafiltration of the crude extracts using an Amicon system. The hydrolysis patterns of different xylans and paper pulps by xylanase activity ranged from xylose, xylobiose and xylotriose to higher xylooligosaccharides. A purified ß-xylosidase from the Trichoderma harzianum strain released xylose, xylobiose and xylotriose from seaweed, deacetylated, oat spelt and birchwood xylans. The purified enzyme was not active against acetylated xylan and catalyzed the hydrolysis of xylooligosaccharides, including xylotriose, xylotetraose and xylopentaose. However, the enzyme was not able to degrade xylohexaose. Xylanase pretreatment was effective for hardwood kraft pulp bleaching. Hardwood kraft pulp bleached in the XEOP sequence had its kappa number reduced from 13.2 to 8.9 and a viscosity of 20.45 cp. The efficiency of delignification was 33%.

Effects of the partial removal of wood hemicelluloses on the properties of kraft pulp

The objective of this work was to study the effects of partial removal of wood hemicelluloses on the properties of kraft pulp.The work was conducted by extracting hemicelluloses (1) by a softwood chip pretreatment process prior to kraft pulping, (2) by alkaline extraction from bleached birch kraft pulp, and (3) by enzymatic treatment, xylanase treatment in particular, of bleached birch kraft pulp. The qualitative and quantitative changes in fibers and paper properties were evaluated. In addition, the applicability of the extraction concepts and hemicellulose-extracted birch kraft pulp as a raw material in papermaking was evaluated in a pilot-scale papermaking environment. The results showed that each examined hemicellulose extraction method has its characteristic effects on fiber properties, seen as differences in both the physical and chemical nature of the fibers. A prehydrolysis process prior to the kraft pulping process offered reductions in cooking time, bleaching chemical consumption and produced fibers with low hemicellulose content that are more susceptible to mechanically induced damages and dislocations. Softwood chip pretreatment for hemicellulose recovery prior to cooking, whether acidic or alkaline, had an impact on the physical properties of the non-refined and refined pulp. In addition, all the pretreated pulps exhibited slower beating response than the unhydrolyzed reference pulp. Both alkaline extraction and enzymatic (xylanase) treatment of bleached birch kraft pulp fibers indicated very selective hemicellulose removal, particularly xylan removal. Furthermore, these two hemicellulose-extracted birch kraft pulps were utilized in a pilot-scale papermaking environment in order to evaluate the upscalability of the extraction concepts. Investigations made using pilot paper machine trials revealed that some amount of alkalineextracted birch kraft pulp, with a 24.9% reduction in the total amount of xylan, could be used in the papermaking stock as a mixture with non-extracted pulp when producing 75 g/m2 paper. For xylanase-treated fibers there were no reductions in the mechanical properties of the 180 g/m2 paper produced compared to paper made from the control pulp, although there was a 14.2% reduction in the total amount of xylan in the xylanase-treated pulp compared to the control birch kraft pulp. This work emphasized the importance of the hemicellulose extraction method in providing new solutions to create functional fibers and in providing a valuable hemicellulose co-product stream. The hemicellulose removal concept therefore plays an important role in the integrated forest biorefinery scenario, where the target is to the co-production of hemicellulose-extracted pulp and hemicellulose-based chemicals or fuels.

e-Business and collaboration: A case study of pulp supply chain

This thesis studies how the case company could digitalize its supply chain and what kind of advantages this would create in the light of supply chain efficiency. The case company manufactures several pulp products that are used for paper, fabrics and packaging products by customers worldwide. The paper and pulp industry has been paying more and more attention to increasing supply chain efficiency with new operating and service models made possible by today’s information technology. The main focus of this study is on the supply chain between the case company and its key customers and the goal is to find ways to make the operations between them as efficient as possible. The study relays heavily on collaboration techniques and digitalization technologies. In addition to a theoretical framework, the study includes several empirical studies that offer real-life examples of how these theories and technologies are applied in operating environments similar to the case company. A plan with strategic and operational levels is created according to the findings of the previous sections to support the case company’s future operations. The plan is based on an RFID-supported collaboration model that aims to advance information sharing between the supply chain partners. The time for an RFID-investment is sought to be very optimal and the benefits of such system to be noteworthy, but challenging to measure in monetary terms.

Production planning and optimization of a pulp mill: introduction of the optimisation based scheduling software for pulp industry

The objective of this project was to introduce a new software product to pulp industry, a new market for case company. An optimization based scheduling tool has been developed to allow pulp operations to better control their production processes and improve both production efficiency and stability. Both the work here and earlier research indicates that there is a potential for savings around 1-5%. All the supporting data is available today coming from distributed control systems, data historians and other existing sources. The pulp mill model together with the scheduler, allows what-if analyses of the impacts and timely feasibility of various external actions such as planned maintenance of any particular mill operation. The visibility gained from the model proves also to be a real benefit. The aim is to satisfy demand and gain extra profit, while achieving the required customer service level. Research effort has been put both in understanding the minimum features needed to satisfy the scheduling requirements in the industry and the overall existence of the market. A qualitative study was constructed to both identify competitive situation and the requirements vs. gaps on the market. It becomes clear that there is no such system on the marketplace today and also that there is room to improve target market overall process efficiency through such planning tool. This thesis also provides better overall understanding of the different processes in this particular industry for the case company.

Pressforming of a tray from a pulp sheet

The aim of this thesis work was to verify the possibility to produce tray packages directly from pulp sheets using press forming techniques. The different existing raw materials of pulp, various sources of molded pulp and different methods of production of molded pulp were studied. Nine different raw materials which were used for experimental work were provided by Stora Enso mills, and Stora Enso Research Centre, Imatra, Finland. The laboratory tests were carried out using LUT Adjustable packaging line at Lappeenranta University of Technology. The results prove that long virgin fibres of pine pulp seems to have better formability with high moisture content compared to others. No significant improvements were noticed with conditioned samples, never the less far studies has to be done to find optimal conditions for production. The results indicated the possibility for making pressformed tray from two different pulp qualities (Sunila pulp and Enopine). The method could prove to be beneficiary as the production line could be shortened and investment in board machines could be avoided if the trays were pressed directly from pulp sheets. Also the labour costs would be reduced. However, there is much work to be done before the quality of a tray produced out of a pulp sheet is comparable to a tray produced out of tray board.