A Numerical Study of the Flow Fields in a Highly Off-Design Variable Geometry Turbine

Conventionally, radial turbines have almost exclusively used radially fibred blades. While issues of mechanical integrity are paramount, there may be opportunities for improving turbine efficiency through a 3D blade design without exceeding mechanical limits. Off-design performance and understanding of the secondary flow structures now plays a vital role in the design decisions made for automotive turbocharger turbines. Of particular interest is extracting more energy at high pressure ratios and lower rotational speeds. Operating in this region means the rotor will experience high values of positive incidence at the inlet. A CFD analysis has been carried out on a scaled automotive turbine utilizing a swing vane stator system. To date no open literature exists on the flow structures present in a standard VGT system. Investigations were carried out on a 90 mm diameter rotor with the stator vane at the maximum, minimum and 25% mass flow rate positions. In addition stator vane endwall clearance existed at the hub side. From investigation of the internal flow fields of the baseline rotor, a number of areas that could be optimized in the future with three dimensional blading were identified. The blade loading and tip leakage flow near inlet play a significant role in the flow development further downstream at all stator vane positions. It was found that tip leakage flow and flow separation at off-design conditions could be reduced by employing back swept blading and redistributing the blade loading. This could potentially reduce the extent of the secondary flow structures found in the present study.

Identification of Dynamics of Surface Suction Over an Airfoil at Low Reynolds Numbers

This paper deals with identification of dynamics in suction control of airfoils for low Reynolds number regimes (8 x 10^4 - 5 x 10^5). In particular, the dynamics of interest is the map that relates suction pressure and surface pressure. Identification of such dynamics is of use to a variety of active control applications including suction control in small/medium wind turbines which operate in these Reynolds number regimes. Prior research has largely focused on higher Reynolds number regimes, creating a need for such a study. Towards identifying the said dynamic relations, experiments were conducted on NACA0012 airfoil in a wind tunnel. The dynamic relation between suction and surface pressure was identified as an overdamped second order system.

Confronto tra diverse localizzazioni di un impianto eolico contemperando produttività ed impatto visivo

This paper proposes a series of variations in designing the location of a wind farm on Monti della Tolfa. These project solutions aim at mitigating the visual impact caused by the wind aerogenerators. Besides the usual location of the wind aerogenerators on the skyline, these alternatives within the project design relate to the placement of wind turbines in the middle and at the bottom of the hillside. Other possible mitigation forms relate to the dimensions and the colour of the wind towers. This study proposes both a non-monetary and monetary analysis of the visual impact related to each project proposal. The final aim of the paper is to analyze economic and financial costs-benefits for each alternative to find out the economic optimal solution.

Análisis del potencial energético del río Toachi para la generación hidroeléctrica.

This article details how the primary studies are specified to establish the flow of energy power generation and principally the turbines design flow, starting from the analysis of how determine the flow of a basin and also the methods to define the runoff flow which generates the rainfalls in the basins, analyzing the kind of grounds. When the flow of the river (basin) and design flow are specified, the type of turbine to be used is determined and also define the best efficiency possible, taking into consideration the geography of the zone of the hydroelectric, the abacus help to choose the turbine in agreed to parameters like electricity potency, voltage drops and voltage. By using the above software previously, for the design house Sarapullo and Alluriquín Hydroelectric Project Toachi machines - Pilatón, it was determined that each generating station will have three turbines type Francis of vertical axis with their complementary systems for its operation which are designed to generate 254.4 megawatts (MW) using a flow of 33.33 m3/s. Keywords: flow, basin, electric power, runoff, hydroelectric, turbine.

A new combined joules supercritical rankine cycle exergetic analysis and optimization

The application of a supercritical Rankine cycle in combined cycles does not happen in today’s thermoelectric power stations. Nevertheless, the most recent development in gas turbines, that allows a high efficiency and high exhaust gases temperatures, and the improvement of high pressure and temperature alloys, makes this cycle possible. This study’s intent is to prove the viability of this combined cycle, since it can break the 60% efficiency barrier, which is the plafond in actual power stations. To attain this target, several configurations for this cycle have been simulated, optimized and analyzed [1]. The simulations were done with the computational program IPSEpro [2] and the optimizations were effectuated with software developed for the effect, using the DFP method [3]. In parallel with the optimization that claims the cycle’s efficiency maximization, an exergetic analysis was also made [4] to all the cycle components. In opposite to what happens in subcritical combined cycles, it was demonstrated that in supercritical combined cycles the higher efficiency takes place with a single steam pressure in the heat recovery steam generator (HRSG).

Étude CFD des effets du désalignement et du cisaillement sur les performances et le chargement des hydroliennes

Le développement des hydroliennes se base souvent sur des conditions d'écoulement idéalisées qui ne reflètent pas entièrement le courant présent sur un site réel. Dans cette optique, ce mémoire investigue l'effet d'un écoulement non aligné ou cisaillé sur les performances et le chargement de deux types d'hydrolienne : les hydroliennes à rotor axial (HRA) et à aile oscillante (HAO). Cette étude est réalisée à l'aide de simulations numériques et les résultats démontrent que pour les deux types d'hydrolienne, le désalignement produit une réduction de la puissance et de la traînée, tandis que le cisaillement n'a qu'un effet de second ordre sur ces derniers. Le chargement additionnel sur la structure de support causé par des conditions d'écoulement non idéal est aussi similaire pour les deux technologies. Le désalignement et le cisaillement affectent cependant plus significativement le chargement en fatigue des pales de l'HRA que celui de l'aile de l'HAO.

Étude numérique des phénomènes transitoires dans une turbine axiale de type hélice durant l’emballement

Ce mémoire présente l’étude numérique d’un emballement de turbine hydraulique axiale à échelle modèle. Cet état transitoire est simulé du point de meilleur rendement jusqu’à l’atteinte de 95% de la vitesse d’emballement. Pour ce faire, une méthodologie numérique est développée à l’aide du logiciel commercial ANSYS CFX en utilisant une approche "Unsteady Reynolds Averaged Navier-Stokes" avec modèle de turbulence k-ε. Cette méthodologie numérique a été validée grâce à des mesures expérimentales de pression acquises en situation d’emballement sur les aubes d’une roue de turbine axiale étudiée au Laboratoire de Machines Hydrauliques de l’Université Laval. La validation des simulations numériques a été réalisée grâce à des comparaisons dans les domaines temporel et fréquentiel entre les pressions mesurées expérimentalement et calculées numériquement. Les analyses fréquentielles en transitoire ont été effectuées à l’aide de transformées en ondelettes afin de représenter l’évolution temporelle du spectre de fréquence. Des analyses qualitatives de phénomènes hydrauliques prenant place dans la turbine sont aussi présentées. Les analyses effectuées ont permis de confirmer le développement d’un tourbillon en précession par rapport à la roue dans l’aspirateur provocant les fluctuations de pression dominantes à des fréquences subsynchrones. La comparaison entre les données expérimentales et numériques a permis de valider une stratégie de simulation transitoire et d’en définir les limites en vue de prochaines simulations d’emballement. Des tests supplémentaires sont suggérés pour améliorer la précision ou le niveau de confiance de la méthode.

Identificação do potencial renovável para produção de electricidade na perspectiva da microgeração

Tese de doutoramento, Energia e Ambiente (Energia e Desenvolvimento Sustentável), Universidade de Lisboa, Faculdade de Ciências, 2015

Wind resource mapping using landscape roughness and spatial interpolation methods

Energy saving, reduction of greenhouse gasses and increased use of renewables are key policies to achieve the European 2020 targets. In particular, distributed renewable energy sources, integrated with spatial planning, require novel methods to optimise supply and demand. In contrast with large scale wind turbines, small and medium wind turbines (SMWTs) have a less extensive impact on the use of space and the power system, nevertheless, a significant spatial footprint is still present and the need for good spatial planning is a necessity. To optimise the location of SMWTs, detailed knowledge of the spatial distribution of the average wind speed is essential, hence, in this article, wind measurements and roughness maps were used to create a reliable annual mean wind speed map of Flanders at 10 m above the Earth’s surface. Via roughness transformation, the surface wind speed measurements were converted into meso- and macroscale wind data. The data were further processed by using seven different spatial interpolation methods in order to develop regional wind resource maps. Based on statistical analysis, it was found that the transformation into mesoscale wind, in combination with Simple Kriging, was the most adequate method to create reliable maps for decision-making on optimal production sites for SMWTs in Flanders.

Application of adaptive neuro-fuzzy inference for wind power short-term forecasting

The increased integration of wind power into the electric grid, as nowadays occurs in Portugal, poses new challenges due to its intermittency and volatility. Hence, good forecasting tools play a key role in tackling these challenges. In this paper, an adaptive neuro-fuzzy inference approach is proposed for short-term wind power forecasting. Results from a real-world case study are presented. A thorough comparison is carried out, taking into account the results obtained with other approaches. Numerical results are presented and conclusions are duly drawn. (C) 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.

A engenharia Civil e a produção industrial de energia eólica

Dissertação para obtenção do grau de Engenharia Civil na Área de Especialização de Edificações

Caracterização do potencial eólico urbano: o caso de Lisboa

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização em Edificações

Construção de um parque eólico industrial

Dissertação de Natureza Científica para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações

Aproveitamento da energia das correntes marítimas

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica

Tipificação de fundações de torres eólicas em parques industriais, para diversos tipos de solos

Dissertação para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações