Surface characterization of Ti-7.5Mo alloy modified by biomimetic method

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Low voltage and variable-pressure scanning electron microscopy of fractured composites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alternative proposal for Modal Representation of a Non-transposed Three-Phase Transmission Line with a Vertical Symmetry Plane

The objective of this paper is to show an alternative representation in time domain of a non-transposed three-phase transmission line decomposed in its exact modes by using two transformation matrices. The first matrix is Clarke's matrix that is real, frequency independent, easily represented in computational transient programs (EMTP) and separates the line into quasi-modes a, b and zero. After that, Quasi-modes a and zero are decomposed into their exact modes by using a modal transformation matrix whose elements can be synthesized in time domain through standard curve-fitting techniques. The main advantage of this alternative representation is to reduce the processing time because a frequency dependent modal transformation matrix of a three-phase line has nine elements to be represented in time domain while a modal transformation matrix of a two-phase line has only four elements. This paper shows modal decomposition process and eigenvectors of a non-transposed three-phase line with a vertical symmetry plane whose nominal voltage is 440 kV and line length is 500 km.

Síntese hidrotérmica e caracterização estrutural de titanatos nanotubulares para aplicação na captura do dióxido de carbono

Nanostructured materials have been spreading successfully over past years due its size and unusual properties, resulting in an exponential growth of research activities devoted to nanoscience and nanotechnology, which has stimulated the search for different methods to control main properties of nanomaterials and make them suitable for applications with high added value. In the late 90 s an alternative and low cost method was proposed from alkaline hydrothermal synthesis of nanotubes. Based on this context, the objective of this work was to prepare different materials based on TiO2 anatase using hydrothermal synthesis method proposed by Kasuga and submit them to an acid wash treatment, in order to check the structural behavior of final samples. They were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), adsorption/desorption of N2, thermal analysis (TG/DTA) and various spectroscopic methods such as absorption spectroscopy in the infrared (FT-IR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). All the information of characterizations confirmed the complete conversion of anatase TiO2 in nanotubes titanates (TTNT). Observing the influence of acid washing treatment in titanates structure, it was concluded that the nanotubes are formed during heat treatment, the sample which was not subjected to this process also achieved a complete phase transformation, as showed in crystallography and morphology results, however the surface area of them practically doubled after the acid washing. By spectroscopy was performed a discussion about chemical composition of these titanates, obtaining relevant results. Finally, it was observed that the products obtained in this work are potential materials for various applications in adsorption, catalysis and photocatalysis, showing great promise in CO2 capture

Avaliação ultra-estrutural dos efeitos tóxicos da mitomicina C no epitélio ciliar de olhos de coelhos normais com e sem tratamento hipotensor ocular prévio

OBJETIVO: Avaliar o epitélio ciliar interno (ECI) do corpo ciliar após aplicação de mitomicina C (MMC) sob retalho escleral, em animais tratados com dois tipos de inibidores da produção do humor aquoso. MÉTODOS: Foram estudados ambos os olhos de 16 coelhos divididos em 4 grupos experimentais. Foi realizado retalho escleral em todos os olhos dos animais, mas apenas os olhos direitos (OD) receberam MMC. No grupo 1 (G1) não houve tratamento prévio. Nos grupos G2 e G4 foi administrada acetazolamida e nos grupos G3 e G4 maleato de timolol. O ECI foi examinado à microscopia eletrônica de transmissão (MET). Os olhos esquerdos formaram os grupos controle. RESULTADOS: em todos os grupos exceto no G1 OE, foram observadas: retração das células e/ou alargamento entre invaginações, mitocôndrias com rarefação, vesículas claras e corpos densos. A membrana limitante interna estava espessada, descontínua ou descolada em todos grupos exceto G1 OE e G2 OE. Foi observada liberação de material citoplasmático apenas nos grupos tratados com inibidores da produção de humor aquoso. CONCLUSÕES: 1- MMC, acetazolamida e maleato de timolol causaram alterações morfológicas no epitélio ciliar mesmo usados isoladamente. 2- A associação MMC e acetazolamida causou mais alterações do que a acetazolamida isoladamente, mas não mais do que a MMC isoladamente. 3- Nas demais associações as alterações foram semelhantes.

Alterações vasculares na coróide de ratos diabéticos tratados e não tratados

OBJETIVO: Conhecer os efeitos do diabetes e o impacto de seu tratamento medicamentoso em curto e longo prazo sobre os vasos da coróide e membrana de Bruch. MÉTODOS: Foram estudados 30 ratos Wistar, divididos em 3 grupos experimentais: grupo controle (GC), grupo diabético (GD) e grupo diabético tratado (GT), estudados 1 mês (momento M1) e 12 meses (momento M2) após o início do experimento. O diabetes foi induzido por aloxana endovenosa, na dose de 42 mg/kg. O GT foi tratado com hipoglicemiante oral (acarbose) e insulina subcutânea. Após o sacrifício, os olhos foram preparados para exame ao microscópio eletrônico de transmissão, interessando a ultra-estrutura da membrana de Bruch e os vasos da coróide. RESULTADOS: O exame ultra-estrutural da coróide dos ratos diabéticos mostrou depósitos na membrana de Bruch, acúmulo de vesículas, glicogênio e corpos densos no citoplasma das células endoteliais. O grupo mais afetado foi de ratos diabéticos de 12 meses (GDM2). Os animais com menor intensidade de alterações foram os ratos tratados por 12 meses (GTM2). CONCLUSÃO: Os ratos diabéticos desenvolveram alterações degenerativas na membrana de Bruch e vasos da coróide. Estas alterações foram mais evidentes nos animais submetidos à doença crônica, mas também ocorreram agudamente. O tratamento a curto prazo não foi capaz de evitar os processos degenerativos. A longo prazo, o tratamento inibiu a progressão destes processos.

Toxicidade da mitomicina C ao endotélio da córnea de coelhos

Purpose: To evaluate corneal endothelium alterations after applying mitomycin C to the sclera using transmission and scanning electron microscopy, correlating alterations with time, concentration, and evaluation methods. Methods: The corneal endothelium of both eyes of 32 albino rabbits was evaluated and distributed into four groups of 8. Mitomycin C was applied under a scleral flap in the right eye for 5 minutes. Mitomycin C concentrations were 0.5 mg/ml for G1 and G2 and 0.2 mg/ml for G3 and G4. Examinations were performed 15 days after application to G1 and G3, and 30 days after application to G2 and G4. Four cornea in each group were prepared for transmission electron microscopy and four for scanning electron microscopy. Left eyes of all animals were used as controls. Results: Transmission electron microscopy showed corneal endothelium alterations in all groups: rarefied cytoplasm, dilation and fragmentation of rough endoplasmic reticulum cisternae, Golgi apparatus with cisternal dilation, reduced vacuoles, and irregularities of internal membrane more noticeable in G1 and G2. Scanning electron microscopy revealed alterations in all groups except G1: changes in the shape and size of cells and longer filopodial projections. Conclusions: 1-Corneal endothelium alterations were seen at both 0.5 and 0.2 mg/ml concentrations and at 15 and 30 days after mytomicin C application; 2 - Alterations were more intense with higher mytomicin C concentration by transmission electron but not by scanning electron microscopy; 3 - The alterations correlated with time by scanning electron microscopy but not by transmission electron microscopy.

Is Reinke's Edema a Precancerous Lesion? Histological and Electron Microscopic Aspects

The objectives of this study were to evaluate morphologic alterations and precancerous lesions in Reinke's edema. Patients included were 54 smokers with bilateral Reinke's edema submitted to surgery in the Otolaryngology Department, Botucatu Medical School, São Paulo State University, Brazil, between 2002 and 2006. All specimens were evaluated by light microscopy and five contralateral lesions were also evaluated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The main histological alterations were edema (100%), inflammation (81.48%), basal membrane (bm) thickening (77.77%), and vessel proliferation (75.92%). Epithelium alterations were classified as grade 0 (11.11%), grade 1 (70.37%), grade 2 (14.81%), and grade 3 (3.70%). In the case included in grade 3 classification, microinvasive carcinoma was detected. SEM showed epithelial surface with some cellular desquamation, few microridges, and a polished and impermeable surface aspect. TEM showed epithelial hyperplasia, basal cells with different sizes, widening of the intercellular spaces, abnormal desmosome architecture, thickening of the bm, some electron-dense vesicles, and points of interruption. The morphological alterations presented in this study are not specific to Reinke's edema but this lesion can be the site of different grades of dysplasia and carcinoma, justifying the importance of periodic laryngeal endoscopic exams and meticulous histological analysis.

Steatosis of indeterminate cause in a pediatric group: is it a primary mitochondrial hepatopathy?

CONTEXTO E OBJETIVO: em crianças, a esteatose hepática pode se relacionar a erros inatos do metabolismo (EIMs) ou à doença hepática gordurosa não-alcoólica (DHGNA). O objetivo deste estudo foi avaliar e caracterizar esteatose de causa indeterminada por meio de análises morfológica e morfométrica em tecido hepático. TIPO DE ESTUDO E LOCAL: Estudo transversal nos Departamentos de Patologia da Faculdade de Ciências Médicas da Universidade Estadual de Campinas (FCM-Unicamp) e Faculdade de Medicina de Botucatu da Universidade Estadual Paulista (FMB-Unesp). MÉTODOS: Foram utilizadas 18 biópsias hepáticas consecutivas obtidas de 16 pacientes com idade variando de 3 meses a 12 anos e 9 meses, inseridas num banco de dados no período do estudo, que foram analisadas por microscopia óptica e eletrônica. Na microscopia eletrônica, foi realizada determinação da densidade mitocondrial e da área superficial média das mitocôndrias nos hepatócitos. Dez pacientes com idade variando de 1 a 14 anos foram usados como grupo controle. RESULTADOS: Foi detectada esteatose pura, não acompanhada por fibrose ou outra alteração histológica. Foi verificado que, na predominância de esteatose microvesicular, houve aumento significativo da área mitocondrial média. CONCLUSÃO: A esteatose microvesicular pode estar relacionada à hepatopatia mitocondrial primária, principalmente devido à redução na β-oxidação ou parcial estagnação da fosforilação oxidativa. Por essas razões, esta forma de esteatose (que não pode ser chamada de pura) possivelmente represente uma fase inicial no amplo espectro da DHGNA. Chamamos a atenção para casos de esteatose no grupo pediátrico com predomínio da forma microvesicular, uma vez que pode haver associação com desordens mitocondriais.

Evaluation of Deformation, Mass Loss, and Roughness of Different Metal Burs After Osteotomy for Osseointegrated Implants

Purpose: This study used bovine ribs to comparatively assess the deformation, roughness, and mass loss for 3 different types of surface treatments with burs, used in osteotomies, for the installation of osseointegrated implants.Materials and Methods: The study used 25 bovine ribs and 3 types of helical burs (2.0 mm and 3.0 mm) for osteotomies during implant placement (a steel bur [G1], a bur with tungsten carbide film coating in a carbon matrix [G2], and a zirconia bur [G3]), which were subdivided into 5 subgroups: 1, 2, 3, 4, and 5, corresponding to 0, 10, 20, 30, and 40 perforations, respectively. The surface roughness (mean roughness [Ra], partial roughness, and maximum roughness) and mass (in grams) of all the burs were measured, and the burs were analyzed in a scanning electron microscope before and after use. Data were tabulated and statistically analyzed by use of the Kruskal-Wallis test, and when a statistically significant difference was found, the Dunn test was used.Results: There was a loss of mass in all groups (G1, G2, and G3), and this loss was gradual, according to the number of perforations made (1, 2, 3, 4, and 5). However, this difference was not statistically significant (P < .05). Regarding the roughness, G3 presented an increase in Ra, partial roughness, and maximum roughness (P < .05) compared with G2 and an increase in Ra compared with G1. There was no statistically significant difference (P > .05) between G1 and G2. The scanning electron microscopy analysis found areas of deformation in all the 2.0-mm samples, with loss of substrates, and this characteristic was more frequent in G3.Conclusions: The 2.0-mm zirconia burs had a greater loss of substrates and abrasive wear in the cutting area. They also presented an increased roughness when compared with the steel and the tungsten carbide coating film in carbon matrix. There was no statistically significant difference (P < .05) between G1 and G2 in any mechanical test carried out. (C) 2012 American Association of Oral and Maxillofacial Surgeons J Oral Maxillofac Surg 70:e608-e621, 2012

A scanning electron microscopy study of diseased root surfaces conditioned with EDTA gel plus Cetavlon after scaling and root planing

In the present investigation, a scanning electron microscopy analysis was performed to evaluate the effects of the topical application of ethylenediaminetetraacetic acid (EDTA) gel associated with Cetavlon (EDTAC) in removing the smear layer and exposing collagen fibers following root surface instrumentation. Twenty-eight teeth from adult humans, single rooted and scheduled for extraction due to periodontal reasons, were selected. Each tooth was submitted to manual (scaling and root planing) instrumentation alone or combined with ultrasonic instruments, with or without etching using a 24% EDTAC gel. Following extraction, specimens were processed and examined under a scanning electron microscope. A comparative morphological semi-quantitative analysis was performed; the intensity of the smear layer and the decalcification of cementum and dentinal surfaces were graded in 12 sets using an arbitrary scale ranging from 1 (area covered by a smear layer) to 4 (no smear layer). Root debridement with hand instruments alone or combined with ultrasonic instruments resulted in a similar smear layer covering the root surfaces. The smear layer was successfully removed from the surfaces treated with EDTAC, which exhibited numerous exposed dentinal tubules and collagen fibers. This study supports the hypothesis that manual instrumentation alone or instrumentation combined with ultrasonic instrumentation is unable to remove the smear layer, whereas the subsequent topical application of EDTAC gel effectively removes the smear layer, uncovers dentinal openings and exposes collagen fibers.

Effects of Er,Cr:YSGG Laser Irradiation on Root Surfaces for Adhesion of Blood Components and Morphology

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Shear bond strength of aesthetic materials bonded to Ni-Cr alloy

Objectives. This study was undertaken to evaluate the shear bond strength of four materials used as aesthetic material bonded to Ni-Cr alloy.Methods. Sixty-eight alloy discs were prepared and divided equally into four groups, and received four treatments for veneering: conventional feldspathic porcelain (Noritake EX-3) and three light-cured prosthodontic composite resins (Artglass, Solidex and Targis). The aesthetic materials were applied after metal structure conditioning in accordance with the manufacturers' recommendations. The specimens were stored in distilled water at 37 degreesC for 7 days. A universal testing machine was used to measure the shear bond strength of the specimens at a cross head speed of 0.5 mm/min. Fractured specimens were examined by using both optical and scanning electron microscope.Results. The analysis of variance and Tukey's test showed that the strongest mean shear bond was obtained with Noritake EX-3 (mean shear bond strength 42.90 +/- 7.82 MPa). For composites, the highest mean shear bond strength was observed for Targis (12.30 +/- 1.57 MPa); followed by Solidex (11.94 +/- 1.04 MPa) and Artglass (10.04 +/- 0.75 MPa). Optical analysis of the fractured surf aces indicated that for Targis and Noritake EX-3 all failures were a mixture of both cohesive and adhesive patterns. As for Artglass and Solidex, the fractures were mainly adhesive in nature.Conclusions. The Solidex system was equivalent to the Targis system in bond strength and exhibited greater strength than the Artglass system. The porcelain fused-to-metal showed considerably higher shear bond strength than the three metal-resin bonding techniques. (C) 2003 Elsevier B.V. Ltd. Ali rights reserved.

Fatigue strength: effect of welding type and joint design executed in Ti-6Al-4V structures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Adhesive Bonding of Resin Composite to Various Ni-Cr Alloy Surfaces Using Different Metal Conditioners and a Surface Modification System

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)