Infrared spectroscopy of Mg-doped SrRuO3 thin films /

The reflectance of thin films of magnesium doped SrRu03(Mg-SR0) produced by pulsed laser deposition on SrTiOa (100) substrates has been measured at room temperature between 100 and 7500 cm~^. The films were chosen to have wide range of thickness, stoichiometry and electrical properties. As the films were very thin (less than 300 nm), and some were insulating the reflectance data shows structures due to both the film and the substrate. Hence, the data was analyzed using Kramers-Kronig constrained variational fitting (VDF) method to extract the real optical conductivity of the Mg-SRO films. Although the VDF technique is flexible enough to fit all features of the reflectance spectra, it seems that VDF could not eliminate the substrate's contribution from fllm conductivity results. Also the comparison of the two different programs implementing VDF fltting shows that this technique has a uniqueness problem. The optical properties are discussed in light of the measured structural and transport properties of the fllms which vary with preparation conditions and can be correlated with differences in stoichiometry. This investigation was aimed at checking the VDF technique and also getting answer to the question whether Mg^"*" substitutes in to Ru or Sr site. Analysis of our data suggests that Mg^+ goes to Ru site.

Composition analysis of high-Tc superconducting thin films by quantitative x-ray fluorescence

A method is presented for determining the composition of thin films containing the elements Bi, Sr, Br, Cu, and Ca. Quantitative x-ray fluorescence (XRF) consisting of radioactive sources (secondary foil excitor 241Am-Mo source and 55Pe source), a Si(Li) detector, and a multichannel analyzer were employed. The XRF system was calibrated by using sol gel thin films of known element composition and also by sputtered thin films analyzed by the conventional Rutherford Back Scattering (RBS). The XRF system has been used to assist and optimize the sputter target composition required to produce high-Tc BiSrCaCuO films with the desired metal composition.

Geological image processing of petrographic thin sections using the rotating polarizer stage

One of the fundamental problems with image processing of petrographic thin sections is that the appearance (colour I intensity) of a mineral grain will vary with the orientation of the crystal lattice to the preferred direction of the polarizing filters on a petrographic microscope. This makes it very difficult to determine grain boundaries, grain orientation and mineral species from a single captured image. To overcome this problem, the Rotating Polarizer Stage was used to replace the fixed polarizer and analyzer on a standard petrographic microscope. The Rotating Polarizer Stage rotates the polarizers while the thin section remains stationary, allowing for better data gathering possibilities. Instead of capturing a single image of a thin section, six composite data sets are created by rotating the polarizers through 900 (or 1800 if quartz c-axes measurements need to be taken) in both plane and cross polarized light. The composite data sets can be viewed as separate images and consist of the average intensity image, the maximum intensity image, the minimum intensity image, the maximum position image, the minimum position image and the gradient image. The overall strategy used by the image processing system is to gather the composite data sets, determine the grain boundaries using the gradient image, classify the different mineral species present using the minimum and maximum intensity images and then perform measurements of grain shape and, where possible, partial crystallographic orientation using the maximum intensity and maximum position images.

The efficacy of cognitive retraining of attentional deficits for a client who has schizophrenia

The purpose of this study was to assess the efficacy of the Process Specific Approach to cognitive rehabilitation for a client with schizophrenia who has attentional deficits. The study was a single case experimental design which followed a variation of the multiple baseline approach. Prior to training of the attentional deficit, multiple baseline assessments were completed. These included an ov:erview of the sUbject's information processing ability, random measures of attention and a genera.l level of functioning in living, learning and working environments. During the re-training, attention tests were administered at the completion of each attention component. A general functional evaluation through interviews and a measure of information processing ability were. completed after the re-training was concluded. The results of the study demonstrate a significant i'mprovement in attention and memory measures. Qualitative data indicate si·gni.ficant others observed improvements in performance in r livi'ng, learning and working environments. The results suggest this approach to cognitive rehabilitation was effective with this subject and further research to establish generalizability is recommended.

The evaluation of a predialysis class on client knowledge and attitude toward compliant behaviours

In this quasi-experimental study, the theory of reasoned action was used as a conceptual framework to assess the outcome effect of a predialysis class. A pretest, posttest design was used to determine changes in client knowledge about their condition and its treatment, and their intention, attitudes and social norm towards compliant behaviours. The related compliant behaviours were following a low-salt diet and taking medications as proscribed. Thirty-eight End Stage Renal Diseases (ESRD) clients were self-selected into the treatment or control groups. Both groups received the standard predialysis education from members of the multidisciplinary renal team. In addition, the treatment group also attended the predialysis class. Subjects' health locus of control, anxiety and demographic variables were measured as possible extraneous variables. Study subjects from both groups demonstrated a high internal and powerful others health locus of control and a normal range of anxiety. Although not statistically significant ill = .64), the experimental group demonstrated higher knowledge level and greater intention to follow a low salt diet UL= .73). They developed more significantly positive attitudes towards following a low salt diet and increased subjective norm influence after attending the predialysis class. Attending the predialysis class did not have an effect on subjects' intentions, attitudes or subjective norm towards taking medications as prescribed. Conclusion: The predialysis class was only marginally effective in increasing client knowledge, but influenced clients' attitudes towards following a low-salt diet. Based on the results, recommendations for improvements to the class have been suggested.

Preparation of SrMgx-Ru1-xO3 thin films by pulsed laser deposition /

SrMg^Rui-iOa thin films were made by using pulsed laser deposition on SrTiOa (100) substrates in either O2 or Ar atmosphere. The thin films were characterized by x-ray diffraction, energy dispersive x-ray microanalysis, dc resistivity measurement, and dc magnetization measurement. The effect of Mg doping was observed. As soon as the amount of Mg increased in SrMg-cRui-iOa thin films, the magnetization decreased, and the resistivity increased. It had little effect on the Curie temperature (transition temperature). The magnetization states of SrMgiRui-iOa thin films, for x < 0.15, are similar to SrRuOs films. X-ray diffraction results for SrMga-Rui-iOa thin films made in oxygen showed that the films are epitaxial. The thin films could not be well made in Ar atmosphere during laser ablation as there was no clear peak of SrMg^Rui-iOa in x-ray diffraction results. Substrate temperatures had an effect on the resistivity of the films. The residual resistivity ratios were increased by increasing substrate temperature. It was observed that the thickness of thin films are another factor for film quality: Thin films were epitaxial, but thicker films were not epitaxial.

Occupational therapist and client experiences of a mental health group

The purpose of this qualitative study was to understand the client and occupational therapist experiences of a mental health group. A secondary aim was to explore the extent to which this group seemed to have reflected a client-centred approach. The topic emerged from personal and professional issues related to the therapist as teacher and to inconsistencies in practice with the profession's client-centred philosophy. This philosophy, the study's frame of reference, was established in terms of themes related to the client-therapist relationship and to client values. Typical practice was illustrated through an extensive literature review. Structured didacticexperiential methods aiming toward skill development were predominant. The interpretive sciences and, to a lesser extent, the critical sciences directed the methodology. An ongoing support group at a community mental health clinic was selected as the focus of the study; the occupational therapist leader and three members became the key participants. A series of conversational interviews, the . core method of data collection, was supplemented by observation, document review, further interviews, and fieldnotes. Transcriptions of conversations were returned to participants for verification and for further reflection. Analysis primarily consisted of coding and organizing data according to emerging themes. The participants' experiences of group, presented as narrative stories within a group session vignette, were also returned to participants. There was a common understanding of the group's structure and the importance of having "air time" within the group; however, differences in perceptions of such things as the importance of the group in members' lives were noted. All members valued the therapeutic aspects of group, the role of group as weekly activity and, to a lesser extent, the learning that came from group. The researcher's perspective provided a critique of the group experience from a client-centred perspective. Some areas of consistency with client-centred practice were noted (e.g., therapist attitudes); however the group seemed to function far from a client-centred ideal. Members held little authority in a relationship dominated by the leaders, and leader agendas rather than member values controlled the session. Possible reasons for this discrepancy ranging from past health care encounters through to co-leader discord emerged. The actual and potential significance of this study was discussed according to many areas of implications: to OT practice, especially client-centred group practice, to theory development, to further areas of research and methodology considerations, to people involved in the group and to my personal growth and development.

Examination of students' ability to observe domains of client behaviour in therapeutic recreation

When observing client behaviours, a therapeutic recreation specialist must have a base understanding of typical client behaviours to provide an informed analysis (burlingame & Blaschko, 2010). Providing students with the necessary tools for client observation is significant to the success of this process. The purpose of this study was to assess the relationships amongst the TR student demographic characteristics on acquiring the observation competency necessary to conduct a TR assessment. One hundred seventy-two TR college and university students, enrolled in post-secondary undergraduate TR programs across Ontario, observed a client assessment via video, and recorded their observations using the Tracking Behavioural Assessment (TBA) (Passmore, 2002). Independent samples t-tests and analysis of variance were calculated for the different student characteristics on the domains of the TBA. Significant findings indicated that university students scored more accurately than college students, and advanced students more accurately than novice students, on the emotional and socialization domains.

HG 186.15-186.25 Thin Section

Coarse grained sample with multiple fine grained domains. Clasts range from small to medium and sub-angular to sub-rounded. Mainly contains grain crushing (with grains crushed into one another) and short distance lineations. A few rotation structures are seen and fine grained sand domains can also be seen.

HG 186.80-186.85 Thin section

A coarse grained sample with clay rich domains. Grains range from small to medium and are sub-angular. Rotation structures can be seen around sub-rounded clasts. Lineations can be seen throughout the image, mainly short distance lineations. Small comet structures can also be seen throughout the images.

HG 186.9-187.0 D.E. Thin Section

Coarse grained sample with grains varying from small to medium in size. They range from sub-angular to sub-rounded in shape. The sample is abundant in lineations and comet structures. Minor amounts of grain stacking are present. Inclusions of a clay rich, fine grained domain.

HG 187.45-187.65 Thin Section

Coarse grained sediment with fine grained domains throughout. The clasts in the coarse grained domain range from sub-angular to sub-rounded. Short distance lineations are present throughout the sample. Organic rich domains (darker) are prevalent alongside fractured grains.

HG 188.60-188.70 Thin Section

Dark brown sediment with mainly small grains. Clasts are sub-angular. Abundant in lineations, grain stacking, and minor grain crushing. Lineations are oriented in multiple directions.

HG 195.45-195.55 Thin Section

Dark brown sediment with clasts ranging from small to large. The grains are sub-angular. Two main domains can be seen. Both are coarse grained, but one contains larger grains and potentially more clay material. Lineations are present throughout the sample in multiple directions. Minor rotation around a few larger clasts can be seen, as well as comet structures.

HG 196.20-196.30 Thin Section

Brown, coarse grained sediment , with clay material. Clasts range from small to large, and sub-angular to sub-rounded. Organic material can be seen. Lineations are abundant. Grain stacking edge-to-edge grain crushing can also be seen. Organic material can be seen. Edge-to-edge grain crushing is seen throughout the image. Contains the inclusion of a finer domain.