744 resultados para textile
Resumo:
The majority of Australians will work, sleep and die in the garments of the mass market. Yet, as Ian Griffiths has termed it, the designers of these garments are invisible (2000). To the general public, the values, opinions and individual design processes of these designers are as unknown as their names. However, the designers role is crucial in making decisions which will have impacts throughout the life of the garment. The high product volume within the mass market ensures that even a small decision in the design process to source a particular fabric, or to use a certain trim or textile finish, can have a profound environmental or social effect. While big companies in Australia have implemented some visible strategies for sustainability, it is uncertain how these may have flowed through to design practices. To explore this question, this presentation will discuss preliminary findings from in-depth semi-structured interviews with Australian mass market fashion designers and product developers. The aim of the interviews was to hear the voice of the insider to listen to mass market designers describe their design process, discuss the Australian fashion industry and its future challenges and opportunities, and to comment on what a sustainability for their industry could look like. These interviews will be discussed within the framework of design philosopher Tony Frys writing on design redirection for sustainability.
Resumo:
Australias mass market fashion labels have traditionally benefitted from their peripheral location to the worlds fashion centres. Operating a season behind, Australian mass market designers and buyers were well-placed to watch trends play out overseas before testing them in the Australian marketplace. For this reason, often a designers role was to source and oversee the manufacture of knock-offs, or close copies of Northern hemisphere mass market garments. Both Weller (2007) and Walsh (2009) have commented on this practice. The knock-on effect from this continues to be a cautious, derivative fashion sensibility within Australian mass market fashion design, where any new trend or product is first tested and proved overseas months earlier. However, there is evidence that this is changing. The rapid online dissemination of global fashion trends, coupled with the Australian consumers willingness to shop online, has meant that the knock-off is less viable. For this reason, a number of mass market companies are moving away from the practice of direct sourcing and are developing product in-house under a Northern hemisphere model. This shift is also witnessed in the trend for mass market companies to develop collections in partnership with independent Australian designers. This paper explores the current and potential effects of these shifts within Australian mass market design practice, and discusses how they may impact on designers, consumers and on the wider culture of Australian fashion.
Resumo:
For the Australian fashion industry to move towards a more socially and environmentally ethical industry, change to existing processes would need to occur in all market levels. Change is particularly needed in the mass market, where larger volumes inevitably lead to greater environmental impact. Recent trends in eco fashion have waxed and waned, with only minor impact on the methodology of the mass market design process, with greenwashing and confusion of concepts being common problems. In the mass market, the product lifecycle begins in the design room and ends on the retail floor. A design process for sustainability necessarily expands this lifecycle, assessing the impact of every stage in the life of a fashion garment from the fibre and textiles through to consumer use, to eventual disposal and beyond disposal to fibre recycling and reuse or resale. However, how easy is it for designers to consider a wider view of the product lifecycle in their design process? How much autonomy do they have over their design process, and where do they believe their responsibility begins and ends for the garments they design? This paper will present some preliminary findings from interviews with designers in the Australian womens wear mass market, revealing their concerns and views on the challenges of a sustainability for their industry.
Resumo:
Exhibited at The Fashioning the Future Awards Showcase exhibition Fashioning the Future Awards is the leading international cross-disciplinary platform for celebrating innovative initiatives towards fashion design for sustainability, its development and communication. The 2011 awards are a showcase for exceptional work that celebrates Unique ways to create our futures. Fashioning the Future is designed and coordinated by the Centre for Sustainable Fashion at London College of Fashion. Unique Enterprise Award The Unique Enterprise Award was offered for the consideration of the opportunities that arise from the necessity to solve the issues around water, waste, wellbeing, energy, equality and biodiversity. Winner Alice Payne According to Alice Payne there is no one-size-fits-all approach to creating a sustainable fashion system. Existing companies will need to evolve, change the way they design and produce garments, offer services rather than products, and engage with the end user to consider the end of life and future lives of their garments. The ThinkLifecycle content management system (CMS) acts as a bridge between existing industry practices and new, redirected practice in which sustainability is at the forefront of commercial thinking. Its chief aim is to embed lifecycle thinking within a company at a daily, operational level.
Resumo:
While the fashion industry is normally first to recognise trends and embrace creativity, fashion designers are sometimes the last to acknowledge that business acumen and entrepreneurial skills are needed. However, fashion designers and entrepreneurs are now all members of the new creative global marketplace with its inherent need to sell globally and be competitive with international brands. For the Australian industry, this tension creates enormous pressures due to Australias small population (and market/s), the decreasing textile and manufacturing base, the increase of creative micro businesses and with this the increasing number of young Australians wanting to start their own fashion business. This paper highlights the current size of the Australian fashion industry, the trend for small business models, the career portfolio entrepreneur and strategies Australian universities are undertaking to address students wishing to enter the business of fashion. It also identifies case studies where enterprise learning pedagogy has been successfully implemented into the business education of an Australian fashion program and concludes with recommendations for an enterprise pedagogy that creates authentic learning, while working with industry and community stakeholders in flexible university formats.
Resumo:
Fibres are extremely common. They can originate directly from human and animal hair, and also from textiles in the form of clothing, upholstery and carpets. Hair and textile fibres are relatively easily shed and transferred, which means that it is highly likely that fibres will be found at crime scenes. If such fibres are carefully characterised they can be of immense value in the forensic environment. Vibrational spectroscopy is one of the most important methods for the characterisation of natural and synthetic fibres. The vibrational spectrum, whether mid-IR or Raman, can be considered to be a fingerprint of the molecular structure of the fibre and as such has a very high information content.
Resumo:
Filtration membrane technology has already been employed to remove various organic effluents produced from the textile, paper, plastic, leather, food and mineral processing industries. To improve membrane efficiency and alleviate membrane fouling, an integrated approach is adopted that combines membrane filtration and photocatalysis technology. In this study, alumina nanofiber (AF) membranes with pore size of about 10 nm (determined by the liquid-liquid displacement method) have been synthesized through an in situ hydrothermal reaction, which permitted a large flux and achieved high selectivity. Silver nanoparticles (Ag NPs) are subsequently doped on the nanofibers of the membranes. Silver nanoparticles can strongly absorb visible light due to the surface plasmon resonance (SPR) effect, and thus induce photocatalytic degradation of organic dyes, including anionic, cationic and neutral dyes, under visible light irradiation. In this integrated system, the dyes are retained on the membrane surface, their concentration in the vicinity of the Ag NPs are high and thus can be efficiently decomposed. Meanwhile, the usual flux deterioration caused by the accumulation of the filtered dyes in the passage pores can be avoided. For example, when an aqueous solution containing methylene blue is processed using an integrated membrane, a large flux of 200 L m-2 h-1 and a stable permeating selectivity of 85% were achieved. The combined photocatalysis and filtration function leads to superior performance of the integrated membranes, which have a potential to be used for the removal of organic pollutants in drinking water.
Resumo:
The fashion ecosystem is at boiling point as consumers turn up the heat in all areas of the fashion value, trend and supply chain. While traditionally fashion has been a monologue from designer brand to consumer, new technology and the virtual world has given consumers a voice to engage brands in a conversation to express evolving needs, ideas and feedback. Product customisation is no longer innovative. Successful brands are including customers in the design process and holding conversations with them to improve product, manufacturing, sales, distribution, marketing and sustainable business practices. Co-creation and crowd sourcing are integral to any successful business model and designers and manufacturers are supplying the technology or tools for these creative, active, participatory prosumers. With this collaboration however, there arises a worrying trend for fashion professionals. The design it yourself, indiepreneur who with the combination of technology, the internet, excess manufacturing capacity, crowd funding and the idea of sharing the creative integrity of a product (copyleft not copyright) is challenging the notion that the fashion supply chain is complex. The passive consumer no longer exists. Fashion designers now share the stage with amateur creators who are disrupting every activity they touch, while being motivated by profit as well as a quest for originality and innovation. This paper examines the effects this consumer engagement is having on traditional fashion models and the fashion supply chain. Crowd sourcing, crowd funding, co-creating, design it yourself, global sourcing, the virtual supply chain, social media, online shopping, group buying, consumer to consumer marketing and retail, and branding the individual are indicative of the new consumer-driven fashion models. Consumers now drive the fashion industry - from setting trends, through to creating, producing, selling and marketing product. They can turn up the heat at any time _ and any point _ in the fashion supply chain. They are raising the temperature at each and every stage of the chain, decreasing or eliminating the processes involved: decreasing the risk of fashion obsolescence, quantities for manufacture, complexity of distribution and the consumption of product; eliminating certain stages altogether and limiting the brand as custodians of marketing. Some brands are discovering a new enemy the very people they are trying to sell to. Keywords: fashion supply chain, virtual world, consumer, prosumers, co-creation, fashion designers
Resumo:
The renovation of biomass waste in the form of date seed waste into activated carbon and biofuel by fixed bed pyrolysis reactor has been focused in this study to obtain gaseous, liquid, and solid products. The date seed in particle form is pyrolysed in an externally heated fixed bed reactor with nitrogen as the carrier gas. The reactor is heated from 400C to 600C. A maximum liquid yield of 50wt.% and char of 30wt.% are obtained at a reactor bed temperature of 500C with a running time of 120 minutes. The oil is found to possess favorable flash point and reasonable density and viscosity. The higher calorific value is found to be 28.636 MJ/kg which is significantly higher than other biomass derived. Decolonization of 8597% is recorded for the textile effluent and 7590% for the tannery effluent, in all cases decreasing with temperature increase. Good adsorption capacity of the prepared activated carbon in case of diluted textile and tannery effluent was found.
Resumo:
This article discusses the importance of aesthetic recognition and branding for Chinese fashion designers as prerequisites for their successful positioning in a globalized marketplace. Fundamental to this process is the communication of their aesthetic in their branding process. In addition, the emergence of fashion designers of Asian-American descent who align their creative vision with a globally mainstream audience has created momentum for the new generation of mainland Chinese designers. Chinese creativity is moving to center stage as the countrys role as a leading consumer market with brands of domestic origin strengthens. Thus the aim of this article is to uncover the tension between what is, on the one hand, the need to embrace a global market, and, on the other, the desire to create the elements of a distinctly Chinese brand through aesthetic references to Chinese culture and iconography. We argue that one core element of branding is reference to heritage and tradition. Therefore to satisfy an increasingly sophisticated Chinese consumer, Chinese designers need to be able to incorporate these elements into a characteristic and well-promoted personal vision.
Resumo:
Waste is intrinsic to the fashion system. Fashion is predicated on built-in obsolescence, and as such outmoded garments are rapidly discarded to charity shops or landfill. However, the story of fashion is also one of abundance and extravagance in design ideas. Every season there are new design details prints, embroidery, embellishments, shapes and textures. This excess of ideas is in itself another form of waste, albeit one that is culturally nourishing. The grave of a fashion garment may also be the grave of a seasons research and creativity. This paper compares the tangible waste of the industry with its intangible waste, namely fashions creativity and cultural excess. Fashions excess and abundance of trends and ideas makes any move to curb the environmental impact difficult. For all practitioners of fashion whether designers or consumers the waste and excess inherent in the fashion system is a difficult ethical terrain to negotiate. However, inverting the wasteful phases of the production cycle can help reframe waste from pollution to a source of nourishment for future practice. While creative excesses of designers may be wasted after a season, fashion styles and tropes are recycled and reinvented, with the once pass styles and design ideas from previous years revalorized and returned into the fashion system. Similarly, material garments acquire new value through entering or re-entering the second hand or vintage markets. Design processes can utilise pre or post-consumer textile waste, or eliminate waste through design. In these processes, waste becomes the primary source of nourishment for future fashion cycles.
Resumo:
This reversible garment, the grow-shrink-and-turncoat, is constructed in modules which allow it to be extended or tightened depending on the wearer. Later, it can be disassembled and then reassembled to form a new garment. The laser-cut holes allow for layers of cloth to be added or removed. The design was developed in part from a brainstorming activity with first and second year QUT students their ideas included a garment which can be taken apart, a garment to fit many people, and most intriguingly, a garment that can open and grow like a flower, swelling up in cold weather to warm the body. Taking these ideas, I developed a garment which can be disassembled, with layers added or subtracted by the wearer according to aesthetics and / or comfort. The shell is constructed from six squares of laser cut cloth, draped together with six smaller laser-cut rectangles, held in place with removable stitching. Additional squares and rectangles of cloth can be added / subtracted with ties knotted through the laser-cut holes. The laser cutting becomes a patterning device as well as integral to the construction of the garment. Conceptually, the garment is grounded in the notion of fabric as a precious resource the pieces are designed to be disassembled at end-of-life, and then reconfigured into a fresh design.
Resumo:
This study demonstrates how to study fashion journalism from the point of view, that it is its own field of journalism, akin to other journalism beats such as politics, sports and health. There is scope here for comment on the co-evolution of fashion and journalism, leading to fashion journalism developing as a distinct field of study in its own right. This research contributes more generally to the field of media and cultural studies, by developing the threepart producer/text/reader model, which is the standard media studies analytical framework. The study of fashion media from a cultural studies perspective acknowledges that cultural studies has pioneered the formal study of both journalism and fashion, for instance in studies of womens magazines; but it has not brought the two areas together sufficiently. What little work has been done, however, has allowed theorists to explore how magazines promote feminism and form culture, which acts as a step in concreting fashions importance theoretically. This thesis has contributed to cultural studies by showing the relationship between the corporate industry, of both fashion and media (producer), and the active audience (reader) can be rethought and brought up to date for the more interactive era of the 21st century.
Resumo:
The Akin collection is the outcome of a project to lead, guide and curate a luxury, retail-ready fashion collection from a collaboration between five emerging fashion designers and five established Indigenous artists. Research background There is a history of Indigenous artists in Australia being treated unethically; by misappropriation and misrepresentation of their work, inequity of payment for their creativity and little acknowledgement of their cultural contribution to collaborative fashion product sold globally. This has created an atmosphere of bad press for fashion, as well as a fear for emerging designers to include/collaborate with Indigenous artists for textile prints. This fear has been so intense that many emerging Australian designers are now seeking collaboration with other countries Indigenous communities, thus missing out on a rich cultural and diverse aesthetic that could brand a truly unique Australian label in the international marketplace. The fashion brands that have collaborated with Indigenous Australian artists have traditionally been a ONE designer label incorporating Indigenous prints, for collections that have little acknowledgement of the artists contribution and strong branding for the label and/or fashion designer. This collection seeks to create an equitable and profitable fashion collection under one brand where all artists and designers receive equal payment, equal promotion/credibility, as well as equal royalties for any garments ordered by retailers. Research question Is it possible to curate an ethical, luxury, retail-ready, international fashion brand with a collaboration of five (5) emerging designers and five (5) Indigenous artists? Research contribution In the fashion industry, existing collaborations for Australian Indigenous artists have been with ONE fashion designer or one existing fashion label. This is the first fashion collection created under one brand name with equal credibility and profits for both artists and designers. The process involved presenting workshops ranging from understanding the logistics and timing of the fashion supply chain, costing of garments, the process of ranging fashion product for a collection and creating repeat prints from a specific artwork, ready for digital printing. A workshop was also facilitated so both designer and artist could work together to create (and co-own) unique t shirt prints. Lawyers were consulted and ethical contracts were drawn up to cover all participants in this innovative collaboration. While the collaboration of artist and designer was important, the collection required curation of all elements so that the final collection came together as a professional and cohesive, quality, retail- ready product. This could only be created by experienced practitioners. Research significance The Akin Collection is the first Australian fashion brand to be created as a collaboration between five equally recognised Indigenous artists and five emerging fashion designers. It has familiarized the Indigenous artists to the logistics and culture of the fashion industry and the emerging fashion designers have been familiarized to the logistics and culture of how to collaborate with the unique Indigenous artwork that exists in Australia. After only three months, this culminated in a fashion parade showcasing the Akin collection to over 400 members of the public, government, media and retail. Feedback has been strong from the media and the industry, and a lookbook and photoshoot has been organised to promote and sell the collection both nationally and internationally. These concepts plus the curation outlined, has created a successful, luxury, quality collection ready for the international runways. This project has devised an ethical template for other Indigenous artists and emerging designers to create fashion collections that offer a unique aesthetic that could position and brand Australian fashion in the international marketplace. Key Words Indigenous artists, emerging fashion designers, Australian fashion design, ethical fashion, luxury Australian brand
Resumo:
Shanghai possesses an apt legacy, once referred to as Paris of the East. Municipal aspirations for Shanghai to assume a position among the great fashion cities of the world have been integrated in the recent re-shaping of this modern city into a role model for Chinese creative enterprise yet China is still known primarily as centre of clothing production. Increasingly however, Made in China is being replaced by Created in China drawing attention to two distinct consumer markets for Chinese designers. Fashion designers who have entered the global fashion system for education or by showing their collections have generally adopted a design aesthetic that aligns with Western markets, allowing little competitive advantage. In contrast, Chinese designers who rest their attention on the domestic Chinese market find a disparate, highly competitive marketplace. The pillars of authenticity that for foreign fashion brands extend far into their cultural and creative histories, often for many decades in the case of Louis Vuitton, Hermes and Christian Dior do not yet exist in China in this era of rapid globalisation. Here, the cultural bedrock allows these same pillars to extend only thirty years or so into the past reaching the moments when Deng Xiaoping granted Chinas creative entrepreneurs passage. To this end, interviews with fashion designers in Shanghai have been undertaken during the last twelve months for a PhD dissertation. Production of culture theory has been used to identify working methods, practices of production and the social and cultural milieu necessary for designers to achieve viability. Preliminary findings indicate that some fashion designers have adopted an as-yet unexplored strategy of business and brand development with a distinct Chinese aesthetic at its core, in contrast to the clichd cultural iconography often viewed by Western viewers as representative of Chinese creativity.
