聚合物载体-稀土金属络合物的研究 Ⅵ.聚合物载体-钕络合物对丁二烯聚合的催化活性

红外光谱研究表明,苯乙烯-丙烯酸共聚物载体-钕络合物具有双配位的羧酸根结构,Nd-O键富有共价性。考察了载体钕络合物催化丁二烯聚合的一般规律,载体钕络合物的组成与聚合活性的关系。在溶剂THF或二氧六环的存在下制得的苯乙烯-丙烯酸共聚物最适宜于合成高活性的载体钕络合物。功能团-COOH含量大约12％,金属钕含量与功能团含量摩尔比在0.20左右的载体钕络合物催化活性最佳。

三甲硅基环戊二烯基稀土二氯化物的合成

1978年Lappert等人首先合成了二(三甲硅基环戊二烯基)稀土氯化物[Li(THF)](Me_3SiC_5H_4)_2LnCl] (Ln=Y,Yb)和Yb(C_5H_4SiMe_3)_2。三甲硅基环戊二烯基稀土二氯化物,则未见报导.采用三甲硅基环戊二烯作为合成稀土金属有机化合物的配体,不仅可以增加所合成的稀土化合物在非极性溶剂中的溶解度,而且在反应过程中可以减小歧化反应的发生,得到所要求的产物.我们探索了三甲硅基环戊二烯基稀土二氯化物的合成,并对所得到的产物进行了鉴定.

n-型聚乙炔复合膜电极性能的研究

自MacDiarmid等将聚乙炔(PA)做为二次电池的电极材料以来,其电化学特性和行为引起了人们的极大兴趣.随后的研究表明,p-型PA[(CH)~(y+)Ay~-]_x在电解液中不稳定,用ClO_4~-掺杂的PA充放循环时有降解发生.n-型PA[My~+(CH)~(y-)]_x(y≤0.10)在THF/LiClO_4电解质中较稳定,电化学还原完全可逆,目前已实现1100次充放循环.因此,它既可做电池的正极材料(碱金属为负极),又可做负极材料(TiS_2为正极).我们发现

利用歧化反应的逆反应合成C_5H_5LnCl_2·2LiCl·5THF配合物(Ln=La,Nd)

由于镧系收缩和配位不饱和性,导致长期不能合成轻稀土环戊二烯基氯化物。陈文启等借严格控制氯化稀土与环戊二烯基钠的摩尔比为1:0.5,制备了环戊二烯基轻稀土二氯化物(Pr、Ce、Nd),但即使将这一摩尔比调整为1:0.25也不能得到类似的镧的化合物。李毅等以LnCl_3—LiCl(Ln=La、Nd)的四氢呋喃溶液和等摩尔的C_5H_5Na反应,以比较高的收率制备了[Li(THF)_2]_2(μ-Cl)_4C_5Ln·THF,并测定了其晶体结构。我们

四苯基丁二烯基稀土化合物的合成及其对丁二烯聚合的催化活性

稀土碳π键型化合物已得到广泛研究,而稀土碳σ键型化合物的合成却报道得较少。1970年Hart等人首次报道了稀土碳σ型化合物LiLn(C_6H_5)_4(Ln=Sc,Y,La,Pr)的合成,1981年Evans等人合成了稀土碳σ键型化合物[(C_5H_5)_2LnC(CH_3)_3](THF)(Ln=Er和Lu)。我们合成了如下两种新型四苯基丁二烯基稀土σ键化合物。相似的d-类化合物的晶体结构证实金属碳键为σ键型。研究了(Ⅰ)中的Nd化合物与三乙基铅配合对丁二烯聚合的催化活性。

四株海洋放线菌次级代谢产物的研究

本课题组自1999年以来，将培养条件优化、生物活性跟踪及化学跟踪技术应用到胶州湾海洋放线菌的次级代谢产物研究中，发现了一批具有生物活性的化合物，包括新型骨架等新颖结构的化合物。 本研究从海州湾分离出海洋放线菌172株，对其中70株菌的次级代谢产物进行了生物活性筛选和化学筛选，获得了它们对八种病原微生物的抑制活性数据。发现海州湾海洋放线菌对至少一种受试微生物具有拮抗能力的比例约为30%。从海洲湾分离到的海洋放线菌中筛选得到三株L083、L078和L158用于次级代谢产物的研究，同时本人又从合作实验室获得另一株海洋放线菌B7651，从这四株海洋细菌的发酵粗提物中共分离纯化得到26 个化合物， 其中10 个为新颖结构化合物。具体是，3-Hydroxy-6-[(Z)-3´-hydroxy-2´,4´-dimethyl-hept-4´-enoylamino]-2,4-dimethyl-5-oxo-hexanoic acid (4)，2-[5-(2-oxopropyl)tetrahydrofuran-2-yl]propanoic acid (5)，2-oxatricyclo-octane (10)，Huaiomycin (15)， 5-(6-hydroxy-6-methylheptyl)dihydrofuran-2(3H)-one (17), 6-Hydroxy-6-hydroxymethyl-6H-pyran-3-one (18), 1,6-dihydroxy-hex-3-ene-2,5—dione (19) (1’R, 2R, 4R)-2-(1-hydroxy-8-methylnonyl)-4-hydroxymethyl-butanolide (20) ， Bremeromycin A (22) ，Bremeromycin B (26)。生物活性实验结果表明Bremeromycin A (22)具有选择性的抗枯草杆菌(Bacillus subtilis ATCC 6051)活性和抗微藻Chlorella vulgaris活性。

Lipase-catalyzed regioselective acylation of diosgenyl saponins

Diosgenyl saponins were regio selectively acylated by Novozyme 435 with vinyl esters as acylating agents in THF to afford the corresponding mono- or diacyl diosgenyl saponins. (C) 2001 Elsevier Science Ltd. All rights reserved.

Precursor chemistry for oxide related materials

This thesis describes modelling, synthesis, spectroscopic and physical characterisation, as well as application of Magnesium, Calcium and Copper β-diketonate, β-ketoiminate, β-diiminate, Schiff base, amide and fluorenyl compounds. The selected compounds could potentially find application in materials deposition using Atomic Layer Deposition (ALD), MOCVD, CVD and Sol-Gel techniques. Quantum chemical modelling was used as a tool to perform the comprehensive and rapid study of magnesium and calcium precursor molecules in order to predict which of them would be more successful in ALD of metal oxides. Precursor chemistry plays a key role in ALD, since precursors must be volatile, thermally stable, chemisorb on the surface and react rapidly with existing surface groups. This Thesis describes one aspect of this, surface reactivity between ligands and hydroxyl groups, via a gas-phase model with energetics computed at the level of Density Functional Theory (DFT). A number of different synthetic strategies, both aerobic and anaerobic, were investigated for the synthesis of the described metal complexes. These included the use of different metal starting reagents such as, anhydrous and hydrated inorganic metal salts, metal alkyls and Grignard reagents. Some of previously unreported metal complexes of homoleptic and heteroleptic magnesium, calcium and copper β-diketonates, β-ketoiminates, β-diiminates, amides and Schiff base type were synthesised and characterised: [Mg(hfpd)2(DipPa)], [Mg(hfpd)2(MapH)2], [Mg(hf-ebp)(THF)2], [Mg(tf-Pap)Cl(THF)2], [Ca(PhNacnac)2], [Cu(tf-Pap)2], [Cu(PhNacnac)2], [Cu(hf-ebp)], [Cu(DipPa)] and [Cu(DipPa)2(4,4’-bypy)]. A comprehensive study on the thermal properties of magnesium, calcium and copper β-diketonates, β-ketoiminates, β-diiminates, Schiff base, amide and fluorenyl complexes was performed using TGA and sublimation of selected compounds. Atomic Layer Deposition of MgO using magnesium β-ketoiminate – [bis{(4-N-phenyl)-2-pentonato} magnesium] and β-diketonate - [bis(1,1,1,5,5,5-hexafluoropentane-2,4-dionato)(THF)magnesium hydrate] was performed on Si(100) substrates at 180°C and 0.2 Torr using O2 plasma.

Ruthenium complexes of the 1,4-bis(diphenylphosphino)-1,3-butadiene-bridged diphosphine 1,2,3,4-Me-4-NUPHOS: Solvent-dependent interconversion of four- and six-electron donor coordination and transfer hydrogenation activity

In chloroform, [RuCl2(nbd)(py)(2)] (1) (nbd = norbornadiene; py = pyridine) reacts with 1,4-bis(diphenylphosphino)-1,2,3,4-tetramethyl-1,3-butadiene (1,2,3,4-Me-4-NUPHOS) to give the dimer [Ru2Cl3(eta(4)-1,2,3,4-Me-4-NUPHOS)(2)]Cl (2a), whereas, in THF [RuCl2(1,2,3,4-Me-4-NUPHOS)(PY)(2)] (3) is isolated as the sole product of reaction. Compound 2 exists as a 4:1 mixture of two noninterconverting isomers, the major with C, symmetry and the minor with either C, or C-2 symmetry. A single-crystal X-ray analysis of [Ru2Cl3 (eta(4)-1,2,3,4-Me-4-NUPHOS)(2)] [SbF6] (2b), the hexafluoroantimonate salt of 2a, revealed that the diphosphine coordinates in an unusual manner, as a eta(4)-six-electron donor, bonded through both P atoms and one of the double bonds of the butadiene tether. Compounds 2a and 3 react with 1,2-ethylenediamine (en) in THF to afford [RuCl2(1,2,3,4-Me-4-NUPHOS)(en)] (4), which rapidly dissociates a chloride ligand in chloroform to give [RuCl(eta(4)-1,2,3,4-Me-4-NUPHOS)(en)] [Cl] (5a). Complexes 4 and 5a cleanly and quantitatively interconvert in a solvent-dependent equilibrium, and in THF 5a readily adds chloride to displace the eta(2)-interaction and re-form 4. A single-crystal X-ray structure determination of [RuCl(eta(4)-1,2,3,4-Me-4-NUPHOS)(en)][ClO4] (5b) confirmed that the diphosphine coordinates in an eta(4)-manner as a facial six-electron donor with the eta(2)-coordinated double bond occupying the site trans to chloride. The eta(4)-bonding mode can be readily identified by the unusually high-field chemical shift associated with the phosphorus atom adjacent to the eta(2)-coordinated double bond. Complexes 2a, 2b, 4, and 5a form catalysts that are active for transfer hydrogenation of a range of ketones. In all cases, catalysts formed from precursors 2a and 2b are markedly more active than those formed from 4 and 5a.

Synthesis of a tetraoxy-bis-nortaxadiene, en route to taxol, using a cascade radical cyclisation sequence

Concise syntheses of the substituted enynediones 28a, 33b and 36 starting from the cyclohexenealdehyde 18, corresponding to ring A in the taxanes, and the vinylstannane 24, are described. Treatment of 36 with Bu3SnH–AIBN did not lead to the oxy-substituted taxadiene 37 expected from a tandem radical macrocyclisation–radical transannulation sequence; instead, a mixture of unidentified products resulted. When the PMB ether 33b corresponding to the alcohol 36 was treated with Bu3SnH–AIBN under similar conditions, p-anisaldehyde was isolated, as a major by-product, but no evidence for the formation of a taxadiene could be observed. In contrast, the iododienynedione 41, i.e., deoxy 36, underwent a tandem radical macrocyclisation–transannulation sequence, when treated with Bu3SnH–AIBN, leading to the tetraoxy-bis-nortaxadiene 42 in 44% yield. Attempts to synthesise the alcohol 28b from the silyl ether 28a en route to the iodide 28c instead gave the substituted tetrahydrofuran 29 via an intramolecular oxy-Michael reaction.

Multiple Evidence for Gold(I)center dot center dot center dot Silver(I) Interactions in Solution

[AuAg3(C6F5)(CF3CO2)(3)(CH2PPh3)](n) (2) was prepared by reaction of [Au(C6F5)(CH2PPh3)] (1) and [Ag(CF3CO2)] (1:3). The crystal structures of complexes I and 2 were determined by X-ray diffraction, and the latter shows a polymeric 2D arrangement built by Au - Ag, Ag - Ag, and Ag - O contacts. The metallophilic interactions observed in 2 in the solid state seem to be preserved in concentrated THF solutions, as suggested by EXAFS, pulsed-gradient spin-echo NMR, and photophysical studies, which showed that the structural motif [AuAg3(C6F5)(CF3CO2)(3)(CH2PPh3)] is maintained under such conditions. Time-dependent DFT calculations agree with the experimental photophysical energies and suggest a metal-to-ligand charge-transfer phosphorescence process. Ab initio calculations give an estimated interaction energy of around 60 kJ mol(-1) for each Au - Ag interaction.

TIME-RESOLVED RESONANCE RAMAN-SPECTROSCOPY OF TRIPLET-STATE METALATED AND FREE-BASE TETRAARYLPORPHYRINS

Resonance Raman spectra of the T-1 excited states of Zn and free-base tetra-4-sulfonatophenylporphyrin (TPPS) have been recorded at room temperature in aqueous solution using two-colour time-resolved methods. The spectra of both sulfonated molecules are very similar to their tetraphenylporphyrin (TPP) analogues, which have been recorded in THF solution using the same pump-probe conditions, but they have higher signal-to-noise ratios because interference from strong solvent bands is reduced. Although two different T-1 spectra of Zn(TPP) have been reported these spectra differ slightly from each other and from the spectrum reported here, which has band positions very close (+/-6 cm(-1)) to those of Zn(TPPS). The high S/N ratios obtainable for the water-soluble porphyrins have allowed reliable polarization data to be recorded for their S-0 and T-1 states. This data set allows a realistic comparison of the changes in bonding associated with excitation of both free-base and Zn tetraarylporphyrins to the T-1 state.

Synthesis of caffeic acid and p-hydroxybenzoic acid molecularly imprinted polymers and their application for the selective extraction of polyphenols from olive mill waste waters

Using caffeic acid and p-hydroxybenzoic acid as templates, two molecularly imprinted polymers (MIPs) were prepared that were used for isolation of polyphenols from olive mill waste water samples (OMWWs) without previous pre-treatment. For the preparation of the caffeic acid MIPs 4-vinylpyridine, allylurea, allylaniline and methacrylic acid were tested as functional monomers, ethylene glycol dimethylacrylate (EDMA), pentaerythritol trimethylacrylate (PETRA) and divinylbenzene 80 (DVB80) as cross-linkers and tetrahydrofuran as porogen. For p-hydroxybenzoic acid 4-vinylpyridine, allylurea and allylaniline were tested as functional monomers, EDMA and PETRA as cross-linkers and acetonitrile as porogen. The performance of the synthesized polymers was evaluated against seven structurally related compounds by means of polymer-based HPLC. The two polymers that presented the most interesting properties were further evaluated by batch rebinding and from the derived isotherms their capacity and binding strength were determined. Using solid-phase extraction (SPE), their ability to recognize and bind the template molecule from an aqueous solution as well as the pH dependence of the binding strength were explored. After establishing the best SPE protocol, an aqueous model mixture of compounds and a raw OMWWs sample were loaded on the two best polymers. The result of the consecutive use of the two polymers on the same sample was explored. It was concluded that acidic conditions favour the recognition abilities of both polymers and that they can be used for a quick and efficient isolation of the polyphenol fraction directly from raw OMWW.

Thermolyzable polymer networks and star polymers containing a novel, compact, degradable acylal-based dimethacrylate cross-linker: Synthesis, characterization, and thermolysis

A compact, cleavable acylal dimethacrylate cross-linker, 1,1-ethylenediol dimethacrylate (EDDMA), was synthesized from the anhydrous iron(III) chloride-catalyzed reaction between methacrylic anhydride and acetaldehyde. The ability of EDDMA to act as cross-linker was demonstrated by using it for the preparation of one neat cross-linker network, four star polymers of methyl methacrylate (MMA), and four randomly cross-linked MMA polymer networks using group transfer polymerization (GTP). For comparison, the corresponding polymer structures based on the commercially available ethylene glycol dimethacrylate (EGDMA) cross-linker (isomer of EDDMA) were also prepared via GTR The number of arms of the EDDMA-based star polymers was lower than that of the corresponding EGDMA polymers, whereas the degrees of swelling in tetrahydrofuran of the EDDMA-based MMA networks were higher than those of their EGDMA-based counterparts. Although none of the EDDMA-containing polymers could be cleanly hydrolyzed under basic or acidic conditions, they could be thermolyzed at 200 degrees C within 1 day giving lower molecular weight products.