Kinetics and product distribution of p-nitrophenyl phosphate dianion solvolysis in ternary DMSO/alcohol/water mixtures are compatible with metaphosphate formation

The rate of solvolysis of p-nitrophenyl phosphate (PNPP) dianion in DMSO/water strongly decreases by increasing water concentration. Addition of linear alcohols (methanol, propanol, butanol, pentanol, and hexanol) at constant DMSO/water molar ratio produced an even sharper rate decrease. Alkyl phosphate formation, resulting from PNPP solvolysis in ternary DMSO/water/alcohol mixtures, increased with alcohol concentration and was essentially temperature independent. Methanol and hexanol were the poorest nucleophiles under all conditions. Activation energies and enthalpies for solvolysis in ternary mixtures were similar and entropies varied with alcohol concentration. Taken together these results can be best interpreted in terms of a dissociative mechanism with the intervention of metaphosphate. Copyright (C) 2011 John Wiley & Sons, Ltd.

Lifetime Prevalence, Age and Gender Distribution and Age-of-Onset of Psychiatric Disorders in the Sao Paulo Metropolitan Area, Brazil: Results from the Sao Paulo Megacity Mental Health Survey

Objectives: To estimate prevalence, age-of-onset, gender distribution and identify correlates of lifetime psychiatric disorders in the Sao Paulo Metropolitan Area (SPMA). Methods: The Sao Paulo Megacity Mental Health Survey assessed psychiatric disorders on a probabilistic sample of 5,037 adult residents in the SPMA, using the World Mental Health Survey Version of the Composite International Diagnostic Interview. Response rate was 81.3%. Results: Lifetime prevalence for any disorder was 44.8%; estimated risk at age 75 was 57.7%; comorbidity was frequent. Major depression, specific phobias and alcohol abuse were the most prevalent across disorders; anxiety disorders were the most frequent class. Early age-of-onset for phobic and impulse-control disorders and later age-of-onset for mood disorders were observed. Women were more likely to have anxiety and mood disorders, whereas men, substance use disorders. Apart from conduct disorders, more frequent in men, there were no gender differences in impulse-control disorders. There was a consistent trend of higher prevalence in the youngest cohorts. Low education level was associated to substance use disorders. Conclusions: Psychiatric disorders are highly prevalent among the general adult population in the SPMA, with frequent comorbidity, early age-of-onset for most disorders, and younger cohorts presenting higher rates of morbidity. Such scenario calls for vigorous public health action.

Performance and radial distribution profiles of a variable flow rate sprinkler developed for precision irrigation

Variable rate sprinklers (VRS) have been developed to promote localized water application of irrigated areas. In Precision Irrigation, VRS permits better control of flow adjustment and, at the same time, provides satisfactory radial distribution profiles for various pressures and flow rates are really necessary. The objective of this work was to evaluate the performance and radial distribution profiles of a developed VRS which varies the nozzle cross sectional area by moving a pin in or out using a stepper motor. Field tests were performed under different conditions of service pressure, rotation angles imposed on the pin and flow rate which resulted in maximal water throw radiuses ranging from 7.30 to 10.38 m. In the experiments in which the service pressure remained constant, the maximal throw radius varied from 7.96 to 8.91 m. Averages were used of repetitions performed under conditions without wind or with winds less than 1.3 m s-1. The VRS with the four stream deflector resulted in greater water application throw radius compared to the six stream deflector. However, the six stream deflector had greater precipitation intensities, as well as better distribution. Thus, selection of the deflector to be utilized should be based on project requirements, respecting the difference in the obtained results. With a small opening of the nozzle, the VRS produced small water droplets that visually presented applicability for foliar chemigation. Regarding the comparison between the estimated and observed flow rates, the stepper motor produced excellent results.

Lifetime Prevalence, age and gender distribution and age-of-onset of psychiatric disorders in the São Paulo Metropolitan Area, Brazil: results from the São Paulo Megacity Mental Health Survey

OBJECTIVES: To estimate prevalence, age-of-onset, gender distribution and identify correlates of lifetime psychiatric disorders in the São Paulo Metropolitan Area (SPMA). METHODS: The São Paulo Megacity Mental Health Survey assessed psychiatric disorders on a probabilistic sample of 5,037 adult residents in the SPMA, using the World Mental Health Survey Version of the Composite International Diagnostic Interview. Response rate was 81.3%. RESULTS: Lifetime prevalence for any disorder was 44.8%; estimated risk at age 75 was 57.7%; comorbidity was frequent. Major depression, specific phobias and alcohol abuse were the most prevalent across disorders; anxiety disorders were the most frequent class. Early age-of-onset for phobic and impulse-control disorders and later age-of-onset for mood disorders were observed. Women were more likely to have anxiety and mood disorders, whereas men, substance use disorders. Apart from conduct disorders, more frequent in men, there were no gender differences in impulse-control disorders. There was a consistent trend of higher prevalence in the youngest cohorts. Low education level was associated to substance use disorders. CONCLUSIONS: Psychiatric disorders are highly prevalent among the general adult population in the SPMA, with frequent comorbidity, early age-of-onset for most disorders, and younger cohorts presenting higher rates of morbidity. Such scenario calls for vigorous public health action.

Effects of cryogenic and stress relief treatments on temper carbide precipitation in AISI D2 tool steel

The effects of cryogenic and stress relief treatments on temper carbide precipitation in the cold work tool steel AISI D2 were studied. For the cryogenic treatment the temperature was −196°C and the holding time was 2, 24 or 30 h. The stress relief heat treatment was carried at 130°C/90 min, when applied. All specimens were compared to a standard thermal cycle. Specimens were studied using metallographic characterisation, X-ray diffraction and thermoelectric power measurements. The metallographic characterisation used SEM (scanning electron microscopy) and SEM-FEG (SEM with field emission gun), besides OM (optical microscopy). No variation in the secondary carbides (micrometre sized) precipitation was found. The temper secondary carbides (nanosized) were found to be more finely dispersed in the matrix of the specimens with cryogenic treatment and without stress relief. The refinement of the temper secondary carbides was attributed to a possible in situ carbide precipitation during tempering.

Submandibular glands and the regulation of gastric proliferation and TGFα distribution during rat postnatal development

Rodent gastric mucosa grows and differentiates during suckling-weaning transition. Among the molecules in rat milk, EGF and TGFβ are important peptides in the control of cell proliferation, and together with TGFα, they are also produced by submandibular glands. We aimed to determine the effect of saliva and milk on epithelial cell proliferation in the stomach of rat pups. We also examined the distribution of TGFα in the gastric mucosa after sialoadenectomy (SIALO) and fasting in order to determine whether this growth factor is affected by the deprivation of molecules derived from saliva and milk. SIALO was performed at 14 days and fasting was induced 3 days later. Cell proliferation was evaluated through metaphasic index and TGFα was detected by immunohistochemistry. We observed that whereas SIALO did not alter cell division, since the metaphasic index (MI) was unchanged, fasting stimulated cell proliferation (P < 0.05). After SIALO and fasting, MI was reduced when compared to the fasted group (P < 0.05). We found that TGFα is distributed along gastric gland and SIALO did not interfere in the localization and number of immunolabeled cells, but fasting increased their density when compared to the control (P < 0.05). The association of SIALO and fasting reduced TGFα immunostaining (P < 0.05). Therefore, during fasting, high MI was parallel to increased TGFα in gastric epithelium, but interestingly, this effect was found only in the presence of submandibular glands. We suggest that during suckling, peptides derived from saliva and milk are important to regulate gastric growth.

Temporal and spatial distribution of the ichthyoplankton in the Canary Islands

A pesar del creciente interés en el estudio de las primeras fases de desarrollo de los peces, aún existen zonas donde esta comunidad es relativamente desconocida. Este es el caso de las Islas Canarias. En la presente tesis, gracias a una serie de muestreos semanales en la región costera de la isla de Gran Canaria durante más de dos años, se ha caracterizado de manera precisa la composición, estructura y variabilidad del ictioplancton presente en esta región subtropical. Clupeidos, Espáridos y Góbidos dominaron la comunidad neríticas, mientras que Mictófidos, Gonostomátidos y Photíctidos prevalecieron dentro de las familias oceánicas. La variabilidad temporal de la comunidad larvaria parece estar más relacionada con la temperatura y efectos a pequeña escala (hidrografía, productividad local, ciclo lunar), que con el aumento de productividad anual durante el bloom de finales de invierno. Se definieron dos asociaciones estacionales de larvas estrechamente ligadas a las características de la columna de agua: (1) invierno-primavera, en la que dominan Sardinella aurita, Boops boops y Cyclothone braueri, y son características especies como Pomacentridae sp1, Trachurus picturatus o Scomber colias; y (2) verano-otoño, donde Góbidos y Cyclothone braueri dominan, pero cuyas especies características son Ceratoscopelus warmingii, Pomacentridae sp2 y Anthias anthias, entre otras. Respecto a la variabilidad horizontal, se confirmó la presencia de dos zonas de retención para los huevos y larvas neríticas a barlovento y sotavento (estela cálida) de la isla. Sin embargo, no se encontraron diferencias significativas en la composición de la comunidad larvaria entre las diferentes zonas de la plataforma de la isla. La Zona de Transición Costera Canario-Africana se caracteriza por una gran actividad de mesoscala, que afectará a la distribución de las larvas neríticas de las costas africanas. Esta interacción resulta especialmente evidente en el caso de las larvas, principalmente sardina y anchoa, transportadas en filamentos de afloramiento generados en la región de Cabo Juby-Cabo Bojador. Estos filamentos pueden ser atrapados por remolinos ciclónicos situados al sur de Gran Canaria. Este sistema remolino-filamento podrá, en función de su evolución, actuar como un mecanismo de retención o dispersión para las larvas de especies neríticas africanas. Parte de estas larvas pueden llegar a las costas de Gran Canaria, suponiendo un aporte para las poblaciones larvarias locales, al menos durante el verano. A pesar de la gran cantidad de información obtenida a partir de esta tesis, es necesario continuar con este tipo de estudios para evaluar la importancia de este transporte larvario y su aplicación a la gestión pesquera.

Oxygen and Chlorophyll Distribution in the Eastern Atlantic Ocean from 0º to 35ºS.

Programa de doctorado en Oceanografía. Trabajo presentado para la obtención del Diploma de Estudios Avanzados.

Jaw mechanics of the pterosaur skull construction and the evolution of toothlessness

In the present study, pterosaur skull constructions were analysed using a combined approach of finite element analysis (FEA), static investigations as well as applying classical beam theory and lever mechanics. The study concentrates on the operating regime „bite“, where loads are distributed via the dentition or a keratinous rhamphotheca into the skull during jaw occlusion. As a first step, pterosaur tooth constructions were analysed. The different morphologies of the tooth construction determine specific operational ranges, in which the teeth perform best (= greatest resistance against failure). The incomplete enamel-covering of the pterosaur tooth constructions thereby leads to a reduction of strain and stress and to a greater lateral elasticity than for a complete enamel cover. This permits the development of high and lateral compressed tooth constructions. Further stress-absorption occurs in the periodontal membrane, although its mechanical properties can not be clarified unambiguously. A three-dimensionally preserved skull of Anhanguera was chosen as a case-study for the investigation of the skull constructions. CT-scans were made to get information about the internal architecture, supplemented by thin-sections of a rostrum of a second Anhanguera specimen. These showed that the rostrum can be approximated as a double-walled triangular tube with a large central vacuity and an average wall-thickness of the bony layers of about 1 mm. On base of the CT-scans, a stereolithography of the skull of Anhanguera was made on which the jaw adductor and abductor muscles were modelled, permitting to determine muscular forces. The values were used for the lever mechanics, cantilever and space frame analysis. These studies and the FEA show, that the jaw reaction forces are critical for the stability of the skull construction. The large jugal area ventral to the orbita and the inclined occipital region act as buttresses against these loads. In contrast to the orbitotemporal region which is subject to varying loading conditions, the pattern in the rostrum is less complex. Here, mainly bending in dorsal direction and torsion occur. The hollow rostrum leads to a reduction of weight of the skull and to a high bending and torsional resistance. Similar to the Anhanguera skull construction, the skulls of those pterosaur taxa were analysed, from which enough skull material is know to permit a reliable reconstruction. Furthermore, FEA were made from five selected taxa. The comparison of the biomechanical behaviour of the different skull constructions results in major transformational processes: elongation of rostra, inclination of the occipital region, variation of tooth morphology, reduction of the dentition and replacement of teeth by a keratinous hook or rhamphotheca, fusion of naris and antorbital fenestra, and the development of bony and soft-tissue crests. These processes are discussed for their biomechanical effects during bite. Certain optional operational ranges for feeding are assigned to the different skull constructions and previous hypotheses (e.g. skimming) are verified. Using the principle of economisation, these processes help to establish irreversible transformations and to define possible evolutionary pathways. The resulting constructional levels and the structural variations within these levels are interpreted in light of a greater feeding efficiency and reduction of bony mass combined with an increased stability against the various loads. The biomechanical conclusive pathways are used for comparison and verification of recent hypothesis of the phylogenetic systematics of pterosaurs.

Fault delineation and stress orientations from the analysis of background, low magnitude seismicity in Southern Apennines (Italy)

The aim of this work was to show that refined analyses of background, low magnitude seismicity allow to delineate the main active faults and to accurately estimate the directions of the regional tectonic stress that characterize the Southern Apennines (Italy), a structurally complex area with high seismic potential. Thanks the presence in the area of an integrated dense and wide dynamic network, was possible to analyzed an high quality microearthquake data-set consisting of 1312 events that occurred from August 2005 to April 2011 by integrating the data recorded at 42 seismic stations of various networks. The refined seismicity location and focal mechanisms well delineate a system of NW-SE striking normal faults along the Apenninic chain and an approximately E-W oriented, strike-slip fault, transversely cutting the belt. The seismicity along the chain does not occur on a single fault but in a volume, delimited by the faults activated during the 1980 Irpinia M 6.9 earthquake, on sub-parallel predominant normal faults. Results show that the recent low magnitude earthquakes belongs to the background seismicity and they are likely generated along the major fault segments activated during the most recent earthquakes, suggesting that they are still active today thirty years after the mainshock occurrences. In this sense, this study gives a new perspective to the application of the high quality records of low magnitude background seismicity for the identification and characterization of active fault systems. The analysis of the stress tensor inversion provides two equivalent models to explain the microearthquake generation along both the NW-SE striking normal faults and the E- W oriented fault with a dominant dextral strike-slip motion, but having different geological interpretations. We suggest that the NW-SE-striking Africa-Eurasia convergence acts in the background of all these structures, playing a primary and unifying role in the seismotectonics of the whole region.

Characterization of inclusions and their distribution in natural and artificial samples by synchrotron cryo-micro-tomography (SCXRT)

Zur geometrischen Vermessung und Beschreibung von Einschlüssen in natürlichen sowie im Labor geschaffenen Eispartikeln wurde ein neuartiger Versuchaufbau an der Tomographie-Endstation der Material Science Beam Line an der Swiss Light Source (SLS, Paul Scherrer Institut, Villigen, Schweiz) entwickelt. Dieser besteht aus einer Plexiglas-Tasse und einem doppelwandigen Kaptonfolien-Käfig, der wiederum auf die Düse eines CryojetXL (Oxford Instruments) montiert wurde. Abgesehen von dem hohen Maß an Flexibilit¨at bez¨uglich der Installation erlaubt es dieser Aufbau, die Temperatur des Experiments mit einer Genauigkeit von ± 1 K über einen Bereich von 271 K bis 220 K zu regeln. In den hier beschriebenen Experimenten wurde eine räumliche Auflösung von 1.4 µm erzielt.

A Design Method for Flexure-Based Compliant Mechanisms on the Basis of Stiffness and Stress Characteristics

Geometric nonlinearities of flexure hinges introduced by large deflections often complicate the analysis of compliant mechanisms containing such members, and therefore, Pseudo-Rigid-Body Models (PRBMs) have been well proposed and developed by Howell [1994] to analyze the characteristics of slender beams under large deflection. These models, however, fail to approximate the characteristics for the deep beams (short beams) or the other flexure hinges. Lobontiu's work [2001] contributed to the diverse flexure hinge analysis building on the assumptions of small deflection, which also limits the application range of these flexure hinges and cannot analyze the stiffness and stress characteristics of these flexure hinges for large deflection. Therefore, the objective of this thesis is to analyze flexure hinges considering both the effects of large-deflection and shear force, which guides the design of flexure-based compliant mechanisms. The main work conducted in the thesis is outlined as follows. 1. Three popular types of flexure hinges: (circular flexure hinges, elliptical flexure hinges and corner-filleted flexure hinges) are chosen for analysis at first. 2. Commercial software (Comsol) based Finite Element Analysis (FEA) method is then used for correcting the errors produced by the equations proposed by Lobontiu when the chosen flexure hinges suffer from large deformation. 3. Three sets of generic design equations for the three types of flexure hinges are further proposed on the basis of stiffness and stress characteristics from the FEA results. 4. A flexure-based four-bar compliant mechanism is finally studied and modeled using the proposed generic design equations. The load-displacement relationships are verified by a numerical example. The results show that a maximum error about the relationship between moment and rotation deformation is less than 3.4% for a flexure hinge, and it is lower than 5% for the four-bar compliant mechanism compared with the FEA results.

Black hole evaporation and stress tensor correlations

General Relativity is one of the greatest scientific achievementes of the 20th century along with quantum theory. These two theories are extremely beautiful and they are well verified by experiments, but they are apparently incompatible. Hints towards understanding these problems can be derived studying Black Holes, some the most puzzling solutions of General Relativity. The main topic of this Master Thesis is the study of Black Holes, in particular the Physics of Hawking Radiation. After a short review of General Relativity, I study in detail the Schwarzschild solution with particular emphasis on the coordinates systems used and the mathematical proof of the classical laws of Black Hole "Thermodynamics". Then I introduce the theory of Quantum Fields in Curved Spacetime, from Bogolubov transformations to the Schwinger-De Witt expansion, useful for the renormalization of the stress energy tensor. After that I introduce a 2D model of gravitational collapse to study the Hawking radiation phenomenon. Particular emphasis is given to the analysis of the quantum states, from correlations to the physical implication of this quantum effect (e.g. Information Paradox, Black Hole Thermodynamics). Then I introduce the renormalized stress energy tensor. Using the Schwinger-De Witt expansion I renormalize this object and I compute it analytically in the various quantum states of interest. Moreover, I study the correlations between these objects. They are interesting because they are linked to the Hawking radiation experimental search in acoustic Black Hole models. In particular I find that there is a characteristic peak in correlations between points inside and outside the Black Hole region, which correpsonds to entangled excitations inside and outside the Black Hole. These peaks hopefully will be measurable soon in supersonic BEC.