Pectin methylesterase activity and ascorbic acid content from guava fruit, cv. Predilecta, in different phases of development

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of guava during different phases of the industrial processing

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Corrosion of the component phases presents in high copper dental amalgams. Application of electrochemical impedance spectroscopy and electrochemical noise analysis

The corrosion resistance of three of the constituent phases in high copper dental amalgams has been investigated by electrochemical methods in 0.9% NaCl solution. Polarization curves show corrosion potentials most positive for gamma(1)-Ag2Hg3, followed by Ag-Cu, and gamma-Ag3Sn in agreement with the order of corrosion resistance deduced from the corrosion currents. Complex plane impedance plots at the open circuit potential showed distorted semicircles with diffusional components at low frequency for Ag-Hg and Ag-Cu, while for gamma-Ag3Sn a layer of corrosion products is formed, partially or completely covering the surface of the electrode. Impedance and noise spectra have been compared in the frequency domain, and show good agreement. (C) 2004 Elsevier Ltd. All rights reserved.

Corrosion of dental amalgams: electrochemical study of Ag-Hg, Ag-Sn and Sn-Hg phases

Dental amalgams, formed by reaction of mercury with a powder alloy containing mainly Ag, Sn, Cu and Zn, have a complex metallurgical structure which can contain up to six phases. Their observed corrosion is thus a complex process, which involves contributions from each of the phases present as well as intergranular corrosion. It is thus of interest to investigate the corrosion of individual phases present in dental amalgams. In this work the corrosion behaviour in 0.9% NaCl solution of Ag-Hg, Ag-Sn and Sn-Hg phase components of dental amalgams was investigated by electrochemical methods. The corrosion resistance was found to decrease in the order gamma (1)-Ag2\Hg3, gamma -Ag3Sn and gamma (2)-Sn7Hg. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

Effects of Alloyed and Oxide Phases on Methanol Oxidation of Pt-Ru/C Nanocatalysts of the Same Particle Size

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Optimization of photo-polymerized sol gel monolithic stationary phases prepared in polyacrylate-coated fused-silica capillaries for capillary electrochromatography

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Flotation of blocolloids suspended in liquid phases of different compositions and pH values

The flotation capacity was determined for cells of yeasts strains belonging to the genera Hansenula, Candida and Saccharomyces. A heterogeneous group of yeasts, comprising strains from the three genera, was identified as showing high flotation capacities (degrees of flotation above 50%), which were practically not affected by variations in medium pH in both the synthetic medium and 2% molasses. Thus, the flotation capacity of the cells in this yeast group seemed strongly dependent on the liquid phase properties and/or growth medium composition, more than on the simple variation in pH of the cell suspensions. A second group of strains, belonging to the Saccharomyces genus, including also brewing yeast strains, was identified as having lower flotation capacities (degrees of flotation below 50% at pH 1.5), which showed no alterations or variations significantly affected by the medium pH. Foam volumes obtained with Saccharomyces strains were greater in synthetic media than in molasses owing to the higher air flow rates required for flotation in molasses. The flotation efficiency decreased in molasses in all cases as well as the foam volume, except in the case of Hansenula cells, which showed an increased foam volume. This was probably due to variations in product excretion by the different yeasts and/or differences in cell wall composition.

Structural and electrical properties of ZnO varistors containing different spinel phases

Structural and electrical properties of ZnO varistors were investigated as a function of spinel composition. Six varistor mixtures differing only in chemical composition of spinel, were prepared by mixing separately synthesized constituent phases (DSCP method). Compositions of constituent phases in sintered samples were investigated by changes of lattice parameters of the phases, as well as by EDS analysis of the constituent phases. It was found that compositions of ZnO, intergranular and spinel phases were partially changed during sintering due to redistribution of additives, that was controlled by starting spinel composition and its stability. Electrical characterization showed significant difference in electrical properties of investigated varistors: nonlinearity coefficients ranging from 22 to 55 and leakage currents differing by the order of magnitude. Activation energies of conduction were obtained from ac impedance spectroscopy measurements. Calculated values of activation energies were in the range 0.61-1.0 eV confirming difference in defect structure of ZnO grain boundaries in varistors containing different spinel phases. (C) 2001 Elsevier B.V. Ltd and Techna S.r.l. All rights reserved.

TEMPORAL COUPLING BETWEEN EXTERNAL AUDITORY INFORMATION AND THE PHASES OF WALKING

The purpose of this study was to investigate the effects of an imposed external auditory constraint upon the temporal organization of walking. Ten subjects were videotaped walking normally (N) and with instructions to couple naturally, at mid-swing, or at toe-off to a metronome beat. Based upon an analysis of variance and post hoc Scheffe tests most temporal variables were not significantly different among conditions. The duration of swing phase was significantly different between natural coupling and toe-off. The deviation from the metronome beat was significantly different between the natural coupling and both mid-swing and toe-off. Subjects generally were not successful in achieving coupling during the latter conditions. Thigh and shank phase portraits were used to describe the system's organization to the external constraint.

MORPHOLOGIC AND MORPHOMETRIC ASPECTS OF ENOCYTES OF APIS-MELLIFERA QUEENS AND WORKERS IN DIFFERENT PHASES OF LIFE

Oenocytes of adult workers and queens of Apis mellifera L. were studied in different ages or life stages, by means of morphometric and histologic techniques. In workers, the oenocytes were found in the head, near the mandibles and in the abdomen, immersed in the parietal fat body mainly below the sterna, close to the wax glands. In queens, two populations of oenocytes different in size and localization were found within the parietal and visceral fat body, respectively. The oenocytes of workers and queens show the presence of acid lipids and acid phosphatase. The role of these cells in the castes differences is discussed.

The annual testicular cycle of the domestic quail (Coturnix coturnix japonica)

A morphometric study was conducted on the testis of the domestic quail Coturnix coturnix japonica to determine testicular kinetics. We investigated the variability along the year of testicular parameters such as seminiferous tubule diameter, germinal epithelium height and amount of meiotic figures of maturing spermatids in the seminiferous epithelium and of sperm in the tubular lumen. The results of morphometric analysis showed the occurrence of an annual testicular cycle defined by four distinct phases: a resting phase (at the end of summer), a recrudescence phase (in the fall), a proliferative phase (at the end of winter and beginning of spring), and a regression phase (spring and summer). We also observed that the testes of adult quails present elevated and maximal spermatogenic activity in fall-winter (short-day period) and at the beginning of spring, respectively, and lower values in spring and summer (long-day periods), with minimum values at the end of summer.

Preliminary study of a methodology based on the degree-days concept for predicting the phenological phases of crops

This work develops a methodology (using the degree-days concept and linear regression), to forecast the duration of phenological phases in crops. An experiment was conducted in the greenhouse with three cultivars of cowpea (Vigna unguiculata (C.) Walp.), cv. California-781, Tvx 5058-09C and IT 81D-1032. The methodology was based on the relative thermal efficiency rate, determined for each species or cv. The results show that the proposed methodology may be a good alternative in works involving crops, especially because it does not require the repetition of the experiments.

Anticlastogenic effect of aqueous extracts of Agaricus blazei on CHO-k1 cells, studying different developmental phases of the mushroom

The Agaricus blazei Murill (ABM) mushroom, known as the sun mushroom, is native to Brazil and has become known for its medicinal properties. This study examined the anticlastogenic effect of Agaricus blazei in Chinese hamster ovary cells, CHO-k1, by means of a chromosome aberration test using methyl methanesulphonate (MMS, 10(-4)M) as the DNA damage inducing agent. Two mushroom lines were used, ABM 99/26 and ABM 97/11, and the latter was used in the young (Y) and sporulating (S) developmental phases. The cells were treated for 12 h with MMS alone or combined with aqueous extracts of A. blazei at a final concentration of 0.15%, which were prepared at three different temperatures: (a) hot (60 degreesC), (b) room temperature (25 degreesC) and (c) chilled (4 degreesC). Mushroom extracts showed a marked anticlastogenic effect against DNA damage, as evidenced by a decrease in the number of cells with breaks, regardless of the line used, or the developmental stage or the temperature at which the extract was prepared. Generally, the extracts were more effective in reducing the isochromatid type breaks. The data obtained suggest that extracts of A. blazei mushroom are anticlastogenic under the conditions tested, mainly during the G1 and S stages of the cell cycle, where chromosome breaks of the isochromatid type are produced by the MMS agent. (C) 2003 Elsevier Ltd. All rights reserved.

Secondary phases in Nb-doped BaTiO3 ceramics

In this work, the effect of Nb2O5 addition on the microstructure of BaTiO3 was studied. From XRD diagrams, a diminution in tetragonality parameters with an increase in dopant concentration was observed. In order to determine morphology and composition of secondary phases in niobium-doped barium titanate, EDAX and SEM analyses were carried out. It was found that a concentration of dopant higher than 0.15 mol% leads to fine-grained BaTiO3 without abnormal grain growth. Otherwise, compositions of secondary phases correspond to the titanium-rich region in the BaO-TiO2 phase diagram. Besides, the titanium content in the precipitate increases with the Nb2O5 addition. (C) 2002 Elsevier B.V. Ltd and Techna S.r.l. All rights reserved.