Seabirds and the circulation of Lyme borreliosis bacteria in the North Pacific

Seabirds act as natural reservoirs to Lyme borreliosis spirochetes and may play a significant role in the global circulation of these pathogens. While Borrelia burgdorferi sensu lato (Bbsl) has been shown to occur in ticks collected from certain locations in the North Pacific, little is known about interspecific differences in exposure within the seabird communities of this region. We examined the prevalence of anti-Bbsl antibodies in 805 individuals of nine seabird species breeding across the North Pacific. Seroprevalence varied strongly among species and locations. Murres (Uria spp.) showed the highest antibody prevalence and may play a major role in facilitating Bbsl circulation at a worldwide scale. Other species showed little or no signs of exposure, despite being present in multispecific colonies with seropositive birds. Complex dynamics may be operating in this wide scale, natural hostparasite system, possibly mediated by the host immune system and host specialization of the tick vector.

Intercontinental fligths from European Airports: Towards hub concentration or not?

This paper empirically analyzes changes in the supply of non-stop intercontinental flights from European airports. We take advantage of OAG data for air services from a rich sample of European airports to intercontinental destinations in the period 2004-2008. Results of the empirical analysis indicate a tendency towards a more balanced distribution of intercontinental flights across European airports. We also find that the demographic size of a region, its sector specialization, the political role of its central city and the proportion of connecting traffic explain the amount of and changes in long-haul air services supplied from European airports.

Intraregional trade in South America, 1913-50. Economic linkages before institutional agreements

Dejando de lado NAFTA, la integración comercial en América Latina sigue siendo muy moderada hoy en día, representando alrededor del 20% del comercio total. Lo sorprendente es que estos valores eran más altos en 1945. Esto constituye un hecho paradoxal: la integración comercial alcanzó su récord antes de la firma de acuerdos de integración comercial. En el presente trabajo se estudia el comercio intrarregional a lo largo del período de entreguerras (1913-1950) a través del análisis de cinco casos: Argentina, Bolivia, Brasil, Chile y Peru. El análisis de la integración comercial en este período representa una novedad en la literatura, ya que los trabajos sobre América Latina, específicos de comercio intraregional, se centran en el período a partir de la década de 1960. El documento destaca dos conclusiones principales: a) con la excepción de los períodos de las guerras mundiales, el comercio intraregional ha sido muy modesto desde 1913 hasta la actualidad, b) en general, el comercio intrarregional repitió la especialización del comercio mundial: una alta concentración en productos de bajo valor añadido.

Intraregional trade in South America, 1913-50. Economic linkages before institutional agreements

Dejando de lado NAFTA, la integración comercial en América Latina sigue siendo muy moderada hoy en día, representando alrededor del 20% del comercio total. Lo sorprendente es que estos valores eran más altos en 1945. Esto constituye un hecho paradoxal: la integración comercial alcanzó su récord antes de la firma de acuerdos de integración comercial. En el presente trabajo se estudia el comercio intrarregional a lo largo del período de entreguerras (1913-1950) a través del análisis de cinco casos: Argentina, Bolivia, Brasil, Chile y Peru. El análisis de la integración comercial en este período representa una novedad en la literatura, ya que los trabajos sobre América Latina, específicos de comercio intraregional, se centran en el período a partir de la década de 1960. El documento destaca dos conclusiones principales: a) con la excepción de los períodos de las guerras mundiales, el comercio intraregional ha sido muy modesto desde 1913 hasta la actualidad, b) en general, el comercio intrarregional repitió la especialización del comercio mundial: una alta concentración en productos de bajo valor añadido.

Estudo arqueométrico de cerâmicas do Sítio Guará, Goiás, Brasil

There is no evidence of urban civilization in Brazilian prehistory; most inhabitants lived in tribal groupings, probably with regional economic integration among several independent tribes. There is little evidence of seasonal migrations between the coast and the inland of southern Brazil. Some specialized horticulturists competed among themselves but other groups lived more isolated and probably peacefully, in the upper interfluvial regions. Chemical analysis of artifacts is a means of documenting traffic in particular materials and intraregional production and distribution, development of craft specialization and typological refinement among other issues. In this study we tested some possibilities in two different cultural contexts using the parametric k0 neutron activation analysis technique, which allowed the determination of elements: Al, As, Au, Ce, Cl, Co, Cr, Cs, Cu, Fe, Ga, K, La, Na, Rb, Sc, Ta, Ti, V and Zn.

What explains productivity differentials across spanish cities?

This paper estimates the determinants of productivity differentials across urban areas in Spain. To do so we resort to Spanish Social Security administrative data (MCVL) matched with workers’ fiscal information. We use two-step approach that allows us to control for the confounding effects due to the sorting of more productive workers and more productive firms in bigger cities. Our results indicate that city size is a significant determinant of productivity differentials across Spanish urban areas. We estimate an elasticity of urban agglomeration of 3.3%, which is within the range of values already observed in other countries. We also find that the level of human capital, firm size and the level of industrial specialization also matters in order explain productivity differentials across Spanish cities. Keywords: Agglomeration, wages, productivity, city size. JEL codes: R10, R23, J31

Genome-wide analysis of adaptive molecular evolution in the carnivorous plant Utricularia gibba

The genome of the bladderwort Utricularia gibba provides an unparalleled opportunity to uncover the adaptive landscape of an aquatic carnivorous plant with unique phenotypic features such as absence of roots, development of water-filled suction bladders, and a highly ramified branching pattern. Despite its tiny size, the U. gibba genome accommodates approximately as many genes as other plant genomes. To examine the relationship between the compactness of its genome and gene turnover, we compared the U. gibba genome with that of four other eudicot species, defining a total of 17,324 gene families (orthogroups). These families were further classified as either 1) lineage-specific expanded/contracted or 2) stable in size. The U. gibba-expanded families are generically related to three main phenotypic features: 1) trap physiology, 2) key plant morphogenetic/developmental pathways, and 3) response to environmental stimuli, including adaptations to life in aquatic environments. Further scans for signatures of protein functional specialization permitted identification of seven candidate genes with amino acid changes putatively fixed by positive Darwinian selection in the U. gibba lineage. The Arabidopsis orthologs of these genes (AXR, UMAMIT41, IGS, TAR2, SOL1, DEG9, and DEG10) are involved in diverse plant biological functions potentially relevant for U. gibba phenotypic diversification, including 1) auxin metabolism and signal transduction, 2) flowering induction and floral meristem transition, 3) root development, and 4) peptidases. Taken together, our results suggest numerous candidate genes and gene families as interesting targets for further experimental confirmation of their functional and adaptive roles in the U. gibba's unique lifestyle and highly specialized body plan.

Patrones de publicación internacional, (ssci) de los autores afiliados a universidades españolas, en el ámbito económico-empresarial (1994-2004)

In this paper we analyse the status of scientific publications in Economics and Business in Spain (1994-2004). We focus our research in showing the preferred journals of the authors affiliated to Spanish universities, the quality of these journals and also the evolution along the decade. Throughout the paper we study deeply the areas of knowledge: which are more productive and also how the articles are distributed among Universities considering the areas of knowledge. The results show an important stability concerning the growth of published articles considering different levels of quality of journals. A second result is the important concentration in a few areas of knowledge: Fundamentals of Economic Analysis and Applied Economics. We observe a degree of specialization of several universities. Last, we display the relationship between journal publication and university’s publication pattern.

Novel Robot Solutions for Carrying out Field Joint Welding and Machining in the Assembly of the Vacuum Vessel of ITER

It is necessary to use highly specialized robots in ITER (International Thermonuclear Experimental Reactor) both in the manufacturing and maintenance of the reactor due to a demanding environment. The sectors of the ITER vacuum vessel (VV) require more stringent tolerances than normally expected for the size of the structure involved. VV consists of nine sectors that are to be welded together. The vacuum vessel has a toroidal chamber structure. The task of the designed robot is to carry the welding apparatus along a path with a stringent tolerance during the assembly operation. In addition to the initial vacuum vessel assembly, after a limited running period, sectors need to be replaced for repair. Mechanisms with closed-loop kinematic chains are used in the design of robots in this work. One version is a purely parallel manipulator and another is a hybrid manipulator where the parallel and serial structures are combined. Traditional industrial robots that generally have the links actuated in series are inherently not very rigid and have poor dynamic performance in high speed and high dynamic loading conditions. Compared with open chain manipulators, parallel manipulators have high stiffness, high accuracy and a high force/torque capacity in a reduced workspace. Parallel manipulators have a mechanical architecture where all of the links are connected to the base and to the end-effector of the robot. The purpose of this thesis is to develop special parallel robots for the assembly, machining and repairing of the VV of the ITER. The process of the assembly and machining of the vacuum vessel needs a special robot. By studying the structure of the vacuum vessel, two novel parallel robots were designed and built; they have six and ten degrees of freedom driven by hydraulic cylinders and electrical servo motors. Kinematic models for the proposed robots were defined and two prototypes built. Experiments for machine cutting and laser welding with the 6-DOF robot were carried out. It was demonstrated that the parallel robots are capable of holding all necessary machining tools and welding end-effectors in all positions accurately and stably inside the vacuum vessel sector. The kinematic models appeared to be complex especially in the case of the 10-DOF robot because of its redundant structure. Multibody dynamics simulations were carried out, ensuring sufficient stiffness during the robot motion. The entire design and testing processes of the robots appeared to be complex tasks due to the high specialization of the manufacturing technology needed in the ITER reactor, while the results demonstrate the applicability of the proposed solutions quite well. The results offer not only devices but also a methodology for the assembly and repair of ITER by means of parallel robots.

Genotypic diversity among brazilian isolates of Macrophomina phaseolina revealed by RAPD

Macrophomina phaseolina has been considered one of the most prevalent soybean (Glycine max) pathogens in Brazil. No genetic resistance has been determined in soybean and very little is known about the genetic diversity of this pathogen in tropical and sub-tropical regions. Fifty-five isolates from soybean roots were collected in different regions and analyzed through RAPD for genetic diversity. The UPGMA cluster analysis for 74 loci scored permitted identification of three divergent groups with an average similarity of 99%, 92% and 88%, respectively. The three groups corresponded to 5.45%, 59.95% and 34.6%, respectively of all isolates used. A single plant had three different haplotypes, while 10.9% of the analyzed plants had two different haplotypes. In another study the genetic similarity was evaluated among isolates from different hosts [soybean, sorghum (Sorghum bicolor), sunflower (Helianthus annuus), cowpea (Vigna unguiculata), corn (Zea mays) and wheat (Triticum aestivum)] as well as two soil samples from native areas. Results showed that more divergent isolates originated from areas with a single crop. Isolates from areas with crop rotation were less divergent, showing high similarity values and consequently formed the largest group. Amplification of the ITS region using primers ITS1 and ITS4 produced only one DNA fragment of 620 bp. None of the isolates were differentiated through PCR-RFLP. Our results demonstrated genetic variability among Brazilian isolates of M. phaseolina and showed that one single root can harbor more than one haplotype. Moreover, cultivation with crop rotation tends to induce less specialization of the pathogen isolates. Knowledge of this variation may be useful in screening soybean genotypes for resistance to charcoal rot.

Variability of the wheat powdery mildew pathogen Blumeria graminis f. sp. tritici in the 2003 crop season

Wheat (Triticum aestivum) powdery mildew, caused by the biotrophic fungus Blumeria graminis f. sp. tritici, is one of the most severe foliar diseases attacking this crop, reducing grain yields by 10% to 62% in Brazil. The disease can be controlled by genetic resistance of the host, but the pathogen has physiological specialization, which enables it to infect wheat cultivars that have remained resistant for years. The objective of this work was to evaluate the variability of pathogenic strains of B. graminis f. sp. tritici collected in Brazil and the effectiveness of wheat resistance genes to powdery mildew in the 2003 crop season. Plants of a differential series were inoculated with each monopustular isolate. Thirty-one combinations of effective and ineffective resistance genes were identified. Only the gene Pm4a+... remained totally effective to all isolates, and gene Pm6 was highly effective (below 10% of susceptibility), whereas genes Pm3a and Pm8 were totally ineffective (susceptible to all isolates). Genes Pm3c, D1, and D2 showed low effectiveness (above 50% of susceptibility), and genes Pm1, 2, 4a, 1+?, and 2+Mld had mean effective results to most strains (susceptibility between 10% and 49%). The virulence formula Pm1, 3c, 4a, 6, 1+?, 2+Mld, 4a+..., D2 (effective genes) / 2, 3a, 8, D1 (ineffective genes) was most frequently found, accounting for 15% of the occurrences. The most frequent number of ineffective genes was seven, ranging from three to ten.

Sustaining competitive advantage in changing environment: Case small and medium sized sawmills

The aim of this study is to examine how small and medium sized (SME) sawmills sustain their competitive advantage in the changing environment. Firstly, this study researches what changes affect SME sawmills’ competitiveness and what factors construct their competitive advantage. Secondly, this study examines how SME sawmills sustain their competitive advantage in the future and how agile and flexible they are. The theoretical part of this study represents the existing literature related to changes and competitive advantage in changing situations. The empirical part was executed as a qualitative research and it consists of thematic interviews with two SME sawmills. The results of the study indicate that several change factors affect the competitiveness of SME sawmills and therefore it is crucial to be alert on them. SME sawmills sustain their competitive advantage in the future by specialization and by being agile.

Powdery mildew of ornamental species caused by Oidiopsis haplophylli in Brazil

Oidiopsis haplophylli (syn. Oidiopsis sicula) was identified as the causal agent of powdery mildew diseases occurring on five ornamental species in Brazil. This disease was observed in plastic house-grown lisianthus (Eustoma grandiflorum: Gentianaceae), in nasturtium (Tropaeolum majus: Tropaeolaceae) cultivated under open field conditions and in greenhouse-grown calla lily (Zantedeschia aethiopica: Araceae), impatiens (Impatiens balsamina: Balsaminaceae) and balloon plant (Asclepias physocarpa: Asclepiadaceae). Typical disease symptoms consisted of chlorotic areas on the upper leaf surface corresponding to a fungal colony in the abaxial surface. With the disease progression, these chlorotic areas eventually turned to necrotic (brown) lesions. Fungi morphology on all hosts was similar to that described for the imperfect stage of Leveillula taurica (O. haplophylli). The Koch's postulates were fulfilled by inoculating symptom-free plants via leaf-to-leaf contact with fungal colonies. Additional inoculations using an isolate of O. haplophylli from sweet pepper (Capsicum annuum) demonstrated that it is pathogenic to all five species belonging to distinct botanical families, indicating lack of host specialization. This is the first formal report of a powdery mildew disease on lisianthus, calla lilly, impatiens and nasturtium in Brazil. It is, to our knowledge, the first report of O. haplophyllii infecting A. physocarpa, extending the host range of this atypical powdery mildew-inducing fungus. This disease might become important on these ornamental crops especially in protected cultivation and also under field conditions in hot and dry areas of Brazil.

Katsaus lisäävän valmistuksen (aka 3D-tulostus) mahdollisuuksiin ja kustannuksiin metallisten tuotteiden valmistuksessa: Case jauhepetitekniikka

Suurelle yleisölle lisäävä valmistustekniikka eli ns. 3D-tulostustekniikka näyttäytyy lehtien otsikoissa ja artikkeleissa esiin pulpahtavana ”muotiaiheena”, mutta sekä muovien 3D-tulostustekniikka että metallienkin vastaava valmistustekniikka on ollut olemassa maailmalla ja Suomessa 80-luvun puolivälistä alkaen. Yhdysvalloissa ja Saksassa tekniikkaa käytetään valmistavassa teollisuudessa toiminnallisten osien tuotannossa. Esimerkiksi lentokoneen suihkumoottorien osia ja lääketieteellisiä välineitä tehdään metallijauheesta lisäävän valmistuksen avulla. Itse asiassa eräs menetelmä metalliesineiden valmistamiseksi lasersäteen avulla keksittiin Suomessa ja sitä myös kehiteltiin täällä, mutta teollisuudenala lähti aikanaan nousuun Saksassa. Lisäävä valmistus on tällä hetkellä maailmanlaajuisesti eräs kiinnostavista tuotantotekniikoista, jonka uskotaan muuttavan monia asioita tuotteiden suunnittelussa, toiminnoissa ja valmistuksessa. Tämä tekniikka ei kiinnosta pelkästään valmistavaa teollisuutta, vaan tietotekniikan, lääketieteen, koruvalmistuksen ja muotoilun osaajat sekä uusien liiketoimintamallien kehittäjät ja logistiikka operaattorit ovat teknologiasta kiinnostuneita. Suomelle 3D-tulostustekniikka on suuri mahdollisuus, sillä maassamme on vahva teollinen tieto- ja viestintätekniikkaosaaminen sekä lisäksi olemme maassamme erikoistuneet varsin vaativien teollisiin laitteiden valmistukseen. Eräät suurimmista mahdollisuuksista tällä tekniikalla ovat toimitusketjuihin liittyvät muutokset. Uutta on, että pienetkin yritykset ja organisaatiot voivat soveltaa tätä tekniikkaa valmistuksessa ja jopa kehitellä täysin uusia tuotteita. On myös arvioitu, että lisäävän valmistuksen merkitys valmistustapoihin ja toimitusketjuihin voi olla suurempi kuin koskaan aikaisemmin minkään teknologisen uudistuksen kohdalla. Lisäävästä valmistuksesta usein puhutaankin kolmantena teollisena vallankumouksena juuri tämän takia. 3D-tulostuksen kustannuksia tarkasteltaessa on tärkeätä huomata että vain sulatetun jauheen määrä ratkaisee, ei käytettävän geometrian monimutkaisuus. Tämä erottaa perinteisen ja lisäävän valmistuksen toisistaan. Perinteisesti kappaleen keventäminen on maksanut ”ylimääräistä”, kun taas lisäävässä valmistuksessa kappaleen keveys on jopa kustannusta alentava tekijä. Valmistettavan kappaleen korkeus on yksi kriittisimpiä kustannuksiin vaikuttavia tekijöitä. Tämän vuoksi useamman kappaleen valmistus yhdellä kertaa parantaa kannattavuutta huomattavasti. Samalla kertaa voi ja itse asiassa kannattaakin valmistaa keskenään erilaisia kappaleita. Perinteiset valmistustavat sen sijaan ovat nykyajan vaatimuksille liian hitaita; ne joustavat huonosti, kun kyseessä on pienet, asiakaslähtöiset erät. Trendi on globaalisti kohden yksilöllisiä asiakaslähtöisiä tuotteita, jolloin myös valmistustekniikoiden on oltava joustavia pysyäkseen näiden vaatimusten perässä. Lisäävä valmistus sopii erityisesti hyvin piensarjatuotantoon. Suuremmissa valmistuserissä kuitenkin perinteiset tekniikat ovat kustannustehokkaampia.

Tietojohtamista tukevan toiminnanohjausjärjestelmän vaatimuksia erityistoimialalla: tapaustutkimus eläinterveydenhuollon toimialalla

Veterinary Health Services are following in many areas the practices and medical direction of human medicine and health services. They are reaching for improved efficiency, quality and precision. Competitive position may be improved and productivity increased by specializing and focusing efforts at the practice. This thesis focuses in small animal practices and their needs for ERP (Enterprise Resource Planning) systems in Germany. As a result requirements for ERP solution supporting knowledge management in the small animal practice is presented. Veterinary Health Services is knowledge-intensive business, where written information and tacit knowledge is increasingly bound together with deepening expertise and specialization. Veterinarian is even legally obliged to develop and maintain her professional skills. The current ERP solutions concentrate in the treatment process of veterinary practice. Customer relationship management is left aside. As the competitive situation is getting tighter in veterinary services also the customer relationship management needs to get into the focus and interest to the wider network support in knowledge sharing should take steps forward. Taking into account the requirement of continuous development of professional skills ERP system at the veterinary practice should also be seen as knowledge management tool. It should provide the possibility to create, store, share and use knowledge. The study is conducted first by studying the AS-IS situation of ERP use and market in veterinary health services and then drawing the requirements of TO-BE situation by studying literature and the results of semi qualitative study conducted for German veterinary practices. A group of veterinarians were interviewed, market and network analysis was done and the understanding of market was deepened in two veterinary conferences in Germany. This theses work is requested by Finnish software company Finnish Net Solutions, which is the leading supplier of Veterinary Practice Management software in Finland. The company plans to expand to European market with Cloud based service. Target of the theses is to create understanding of the requirements of German veterinary market to develop ERP solution supporting Knowledge Management in Veterinary Practice.