Effect of fish meal in formulated diet on the growth of Heterotis niloticus in semi-intensive pond culture system

The aim of the investigation is to know the percentage of fish meal required to support the best growth of Heterotis niloticus in a semi intensive pond culture system. To achieve this, feed was formulated with equal percentages of blood meal, and corn meal and varying levels of fish meal. The experiment was in four treatments. Results showed that the mean weight gained was directly proportional to the quantity of fish meal made available to the fish fence 31.58g, 33.79g, 45.15g and 51.24g were recorded for treatments I, II, III and IV respectively. Result from this study when compared with previous works, shows that size of the water body to a greater extent affects the growth. The availability of fish meal in the feed made it more acceptable to the fish and hence a commensurate conversion in to flesh. The analysis of variance showed that there is significant difference in the growth performance in the treatments

To pave or not to pave: A social landscape analysis of land use decision-making in the towns of the lamprey watershed

Population pressure in coastal New Hampshire challenges land use decision-making and threatens the ecological health and functioning of Great Bay, an estuary designated as both a NOAA National Estuarine Research Reserve and an EPA National Estuary Program site. Regional population in the seacoast has quadrupled in four decades resulting in sprawl, increased impervious surface cover and larger lot rural development (Zankel, et.al., 2006). All of Great Bay’s contributing watersheds face these challenges, resulting in calls for strategies addressing growth, development and land use planning. The communities within the Lamprey River watershed comprise this case study. Do these towns communicate upstream and downstream when making land use decisions? Are cumulative effects considered while debating development? Do town land use groups consider the Bay or the coasts in their decision-making? This presentation, a follow-up from the TCS 2008 conference and a completed dissertation, will discuss a novel social science approach to analyze and understand the social landscape of land use decision-making in the towns of the Lamprey River watershed. The methods include semi-structured interviews with GIS based maps in a grounded theory analytical strategy. The discussion will include key findings, opportunities and challenges in moving towards a watershed approach for land use planning. This presentation reviews the results of the case study and developed methodology, which can be used in watersheds elsewhere to map out the potential for moving towns towards EBM and watershed-scaled, land use planning. (PDF contains 4 pages)

Transceiver designs and analysis for LTI, LTV and broadcast channels - new matrix decompositions and majorization theory

Signal processing techniques play important roles in the design of digital communication systems. These include information manipulation, transmitter signal processing, channel estimation, channel equalization and receiver signal processing. By interacting with communication theory and system implementing technologies, signal processing specialists develop efficient schemes for various communication problems by wisely exploiting various mathematical tools such as analysis, probability theory, matrix theory, optimization theory, and many others. In recent years, researchers realized that multiple-input multiple-output (MIMO) channel models are applicable to a wide range of different physical communications channels. Using the elegant matrix-vector notations, many MIMO transceiver (including the precoder and equalizer) design problems can be solved by matrix and optimization theory. Furthermore, the researchers showed that the majorization theory and matrix decompositions, such as singular value decomposition (SVD), geometric mean decomposition (GMD) and generalized triangular decomposition (GTD), provide unified frameworks for solving many of the point-to-point MIMO transceiver design problems.

In this thesis, we consider the transceiver design problems for linear time invariant (LTI) flat MIMO channels, linear time-varying narrowband MIMO channels, flat MIMO broadcast channels, and doubly selective scalar channels. Additionally, the channel estimation problem is also considered. The main contributions of this dissertation are the development of new matrix decompositions, and the uses of the matrix decompositions and majorization theory toward the practical transmit-receive scheme designs for transceiver optimization problems. Elegant solutions are obtained, novel transceiver structures are developed, ingenious algorithms are proposed, and performance analyses are derived.

The first part of the thesis focuses on transceiver design with LTI flat MIMO channels. We propose a novel matrix decomposition which decomposes a complex matrix as a product of several sets of semi-unitary matrices and upper triangular matrices in an iterative manner. The complexity of the new decomposition, generalized geometric mean decomposition (GGMD), is always less than or equal to that of geometric mean decomposition (GMD). The optimal GGMD parameters which yield the minimal complexity are derived. Based on the channel state information (CSI) at both the transmitter (CSIT) and receiver (CSIR), GGMD is used to design a butterfly structured decision feedback equalizer (DFE) MIMO transceiver which achieves the minimum average mean square error (MSE) under the total transmit power constraint. A novel iterative receiving detection algorithm for the specific receiver is also proposed. For the application to cyclic prefix (CP) systems in which the SVD of the equivalent channel matrix can be easily computed, the proposed GGMD transceiver has K/log_2(K) times complexity advantage over the GMD transceiver, where K is the number of data symbols per data block and is a power of 2. The performance analysis shows that the GGMD DFE transceiver can convert a MIMO channel into a set of parallel subchannels with the same bias and signal to interference plus noise ratios (SINRs). Hence, the average bit rate error (BER) is automatically minimized without the need for bit allocation. Moreover, the proposed transceiver can achieve the channel capacity simply by applying independent scalar Gaussian codes of the same rate at subchannels.

In the second part of the thesis, we focus on MIMO transceiver design for slowly time-varying MIMO channels with zero-forcing or MMSE criterion. Even though the GGMD/GMD DFE transceivers work for slowly time-varying MIMO channels by exploiting the instantaneous CSI at both ends, their performance is by no means optimal since the temporal diversity of the time-varying channels is not exploited. Based on the GTD, we develop space-time GTD (ST-GTD) for the decomposition of linear time-varying flat MIMO channels. Under the assumption that CSIT, CSIR and channel prediction are available, by using the proposed ST-GTD, we develop space-time geometric mean decomposition (ST-GMD) DFE transceivers under the zero-forcing or MMSE criterion. Under perfect channel prediction, the new system minimizes both the average MSE at the detector in each space-time (ST) block (which consists of several coherence blocks), and the average per ST-block BER in the moderate high SNR region. Moreover, the ST-GMD DFE transceiver designed under an MMSE criterion maximizes Gaussian mutual information over the equivalent channel seen by each ST-block. In general, the newly proposed transceivers perform better than the GGMD-based systems since the super-imposed temporal precoder is able to exploit the temporal diversity of time-varying channels. For practical applications, a novel ST-GTD based system which does not require channel prediction but shares the same asymptotic BER performance with the ST-GMD DFE transceiver is also proposed.

The third part of the thesis considers two quality of service (QoS) transceiver design problems for flat MIMO broadcast channels. The first one is the power minimization problem (min-power) with a total bitrate constraint and per-stream BER constraints. The second problem is the rate maximization problem (max-rate) with a total transmit power constraint and per-stream BER constraints. Exploiting a particular class of joint triangularization (JT), we are able to jointly optimize the bit allocation and the broadcast DFE transceiver for the min-power and max-rate problems. The resulting optimal designs are called the minimum power JT broadcast DFE transceiver (MPJT) and maximum rate JT broadcast DFE transceiver (MRJT), respectively. In addition to the optimal designs, two suboptimal designs based on QR decomposition are proposed. They are realizable for arbitrary number of users.

Finally, we investigate the design of a discrete Fourier transform (DFT) modulated filterbank transceiver (DFT-FBT) with LTV scalar channels. For both cases with known LTV channels and unknown wide sense stationary uncorrelated scattering (WSSUS) statistical channels, we show how to optimize the transmitting and receiving prototypes of a DFT-FBT such that the SINR at the receiver is maximized. Also, a novel pilot-aided subspace channel estimation algorithm is proposed for the orthogonal frequency division multiplexing (OFDM) systems with quasi-stationary multi-path Rayleigh fading channels. Using the concept of a difference co-array, the new technique can construct M^2 co-pilots from M physical pilot tones with alternating pilot placement. Subspace methods, such as MUSIC and ESPRIT, can be used to estimate the multipath delays and the number of identifiable paths is up to O(M^2), theoretically. With the delay information, a MMSE estimator for frequency response is derived. It is shown through simulations that the proposed method outperforms the conventional subspace channel estimator when the number of multipaths is greater than or equal to the number of physical pilots minus one.

Em busca do convívio social: o regime semi-aberto no Instituto Penal Oscar Stevenson

O presente trabalho tem como objetivo central analisar o Sistema Penitenciário do Estado do Rio de Janeiro a partir do regime semi-aberto, tendo como campo de análise o Instituto Penal Oscar Stevenson, situado em Benfica, no município do Rio de Janeiro, voltado para um público carcerário feminino. Buscou-se verificar, sob o enfoque das presas, a expectativa e possibilidades de retorno ao convívio social; analisar os aspectos jurídico-institucionais referentes ao regime semi-aberto, no que tange a obtenção dos benefícios, junto a Lei de Execução Penal e identificar quais as parcerias que viabilizam a inserção delas no mercado de trabalho. Para a efetivação desse trabalho utilizou-se, preferencialmente os pressupostos teóricos e metodológicos da pesquisa quali-quantitativa, pois foi trabalhado não só no nível da objetividade, mas também no significado das ações e relações humanas, sabendo que a realidade prisional é perpassada por questões de cunho opressor, punitivo, em função de preconizar a segurança. Foram realizados também levantamentos de dados bibliográficos e censitários, bem como entrevistas semi-estruturadas junto aos agentes penitenciários do setor de educação e classificação e principalmente as presas. A análise do material coletado permitiu confirmar as hipóteses da pesquisa: i) que a ausência de oportunidades que garantam às presas os benefícios do regime semi-aberto não se dá por falta de instrumentos legais, mas sim pela burocracia no cadastramento e poucas parcerias de cursos profissionalizantes, empresas privadas que absorvam mão-de-obra das presas do regime semi-aberto; e ii) e que no momento em que as presas ainda estavam no regime fechado, não tiveram oportunidades de se capacitarem e também os vínculos familiares não foram mantidos, com isso dificultando que estas usufruam dos benefícios do regime semi-aberto. E, conseqüentemente, sendo cada vez mais adiado o seu retorno gradativo ao convívio social, através da progressão de regime.

Avaliação de diferentes estratégias de biorremediação de solo argiloso contaminado por óleo em biorreator de fase semi-sólida

A prática da troca de óleo lubrificante usado, particularmente óleos automotivos, representa um grave problema ambiental em função de sua natureza perigosa, do manuseio incorreto e do descarte indiscriminado no meio ambiente. A investigação quanto à remediação de áreas contaminadas por esse resíduo torna-se necessária, particularmente para solo de natureza argilosa. O presente estudo teve por objetivo avaliar a biorremediação de um solo argiloso contaminado por óleo lubrificante utilizando biorreatores de fase semi-sólida. Frascos tipo Erlenmeyer, contendo 20 g de solo contaminado com 3% (m/m) de óleo lubrificante, em triplicata, foram mantidos em temperatura e agitação constantes, segundo as seguintes estratégias de tratamento: (i) Bioestímulo com ajuste de nutrientes (BIOE); (ii) Bioaumento com adição de inóculo microbiano aclimatado (BIOA); (iii) Bioestímulo e adição de surfactante sintético Tween-80 (BIOES); (iv) Bioaumento, bioestímulo e surfactante sintético Tween-80 (BIOAS) e (iv) controle, com água destilada purificada (CONT). A eficiência de remoção do contaminante foi avaliada após 68 dias de tratamento por análises de evolução de CO2, redução de COT, decaimento de HTP, de n-alcanos e frações de hidrocarbonetos saturados, aromáticos e compostos polares. O tratamento BIOAS resultou na maior produção de CO2 acumulada (1247,0 mg.20g-1 de solo) seguida pelo tratamento BIOES (1077,6 mg.20g-1 de solo). Ao final do experimento, todos os tratamentos reduziram significativamente os teores de HTPs quando comparados ao controle (11,14,2%). Os tratamentos BIOAS e BIOES não apresentaram diferenças significativas quanto à redução de HTPs (42,03,7% e 37,46,3%, respectivamente). Tanto o bioestímulo quanto o bioaumento mostraram-se estratégias com potencial para aumentar a eficácia da biorremediação de solos argilosos, sendo que a adição de surfactante foi o fator mais importante, tendo aumentado significativamente a capacidade de remoção em ambas as estratégias. O uso de biorreatores em fase semi-sólida na biorremediação de solo argiloso contaminado com óleo lubrificante mostrou-se bastante promissor e tal estratégia pode ser aplicada em escala imediatamente superior

Time-dependent monoenergetic neutron transport in two adjacent semi-infinite media

An exact solution to the monoenergetic Boltzmann equation is obtained for the case of a plane isotropic burst of neutrons introduced at the interface separating two adjacent, dissimilar, semi-infinite media. The method of solution used is to remove the time dependence by a Laplace transformation, solve the transformed equation by the normal mode expansion method, and then invert to recover the time dependence.

The general result is expressed as a sum of definite, multiple integrals, one of which contains the uncollided wave of neutrons originating at the source plane. It is possible to obtain a simplified form for the solution at the interface, and certain numerical calculations are made there.

The interface flux in two adjacent moderators is calculated and plotted as a function of time for several moderator materials. For each case it is found that the flux decay curve has an asymptotic slope given accurately by diffusion theory. Furthermore, the interface current is observed to change directions when the scattering and absorption cross sections of the two moderator materials are related in a certain manner. More specifically, the reflection process in two adjacent moderators appears to depend initially on the scattering properties and for long times on the absorption properties of the media.

This analysis contains both the single infinite and semi-infinite medium problems as special cases. The results in these two special cases provide a check on the accuracy of the general solution since they agree with solutions of these problems obtained by separate analyses.

Analysis of channel quality reporting mechanisms and their impact into 4G and beyond technologies

206 p.

Influência do comportamento semi-rígido de placas de base e de ligações viga-coluna na resposta dinâmica de pórticos de aço.

Tradicionalmente, na análise e dimensionamento de estruturas de aço, assume-se que as ligações viga-coluna são rígidas ou flexíveis (rotuladas). Por outro lado, é de conhecimento geral que a grande maioria das ligações viga-coluna apresenta um comportamento intermediário, ou seja, semi-rígido. Inúmeros trabalhos de pesquisa têm sido desenvolvidos nos últimos vinte e cinco anos, de forma a estudar o comportamento desse tipo de ligação. Um dos principais objetivos desta investigação é o de propor uma metodologia de análise que represente de forma apropriada a influência do comportamento semi-rígido de placas de base e de ligações viga-coluna, sobre a resposta dinâmica (linear e não-linear) de estruturas de aço. Outra contribuição desta dissertação diz respeito à investigação do comportamento dinâmico (linear e não-linear) de pórticos de aço, a partir da consideração de ligações viga-coluna simétricas e não-simétricas e especialmente das placas de base. A análise estrutural é desenvolvida com base no emprego do programa de elementos finitos ANSYS [27]. Nos modelos em elementos finitos foram considerados os efeitos de não-linearidade geométrica (efeitos de segunda ordem), o comportamento não-linear das placas de base e das ligações viga-coluna e, bem como, o efeito de histerese que ocorre quando a estrutura é submetida a cargas cíclicas. Os resultados alcançados indicaram que o fenômeno físico da ressonância não ocorre no que se refere à resposta dinâmica dos modelos semi-rígidos não-lineares. A ressonância não ocorre na resposta dos modelos devido ao fato de que, na análise dinâmica não-linear, o efeito de histerese presente nas ligações (placas de base e viga-coluna), essencialmente com comportamento não-linear, provoca um amortecimento na resposta dinâmica da estrutura.

The calibration of a semi-quantitative approach to fish stock assessment in the North West Region of the NRA

(1) A total of 45 sites was sampled, each being fished using the semi-quantitative and quantitative techniques. (2) A significant relationship existed between the semi-quantitative and Quantitative results for all age groups of salmonids (R2 83.4% to 96.1%, p < 0.0001). (3) The results from each site were categorised according to an existing classification system for quantitative and semi-quantitative data. The semi-quantitative component of this system was modified using the results of this investigation. The degree of error associated with sites classified semi-quantitatively was found to be slightly less when using the modified system for 0+ salmon, > 0+ salmon and 0+ trout, ranging from 10.5% to 30%. (4) Insufficient data points were available for the analysis of coarse fish data.

Critério estatístico para obtenção de valores de NSPT para previsão da capacidade de carga de estacas por métodos semi empíricos.

Uma das tarefas mais desafiadoras do engenheiro na área da Geotecnia é a escolha dos valores de parâmetros geotécnicos obtidos de ensaios de campo ou laboratório e que serão utilizados nos modelos analíticos ou numéricos na fase de projeto de fundações. Diante das incertezas inerentes aos ensaios de SPT e da heterogeneidade de abordagens para a utilização dos valores de NSPT, é proposta neste estudo, a aplicação de um critério estatístico para obtenção de valores de NSPT, a partir da construção de intervalos de confiança de 95% de probabilidade em torno da reta ajustada de regressão linear simples entre a variável aleatória NSPT e a profundidade. Os valores obtidos de NSPT pelo critério aplicado foram utilizados na previsão da capacidade de carga de 19 estacas isoladas a partir da utilização de três métodos semi-empíricos: Aoki-Velloso (1975) com coeficientes alterados por Monteiro (1997), Décourt & Quaresma (1978) alterado pelo método de Décourt (1996) e Método de Alonso (1996). As cargas de ruptura dessas 19 estacas ensaiadas através de Provas de Carga Estática foram obtidas pelos métodos de extrapolação de Van Der Veen (1953) e Décourt (1996) e serviram para comparação e consequente validação do critério estatístico. Adicionalmente, com fulcro no item 6.2.1.2.1 da ABNT NBR 6122:2010 Resistência calculada por método semi-empírico, foram avaliados os fatores de segurança em relação às cargas de projeto, inclusive, também se utilizando da premissa de reconhecimento de regiões representativas, levando em conta o número de ensaios de SPT executados, fato que promove uma diminuição da incerteza dos parâmetros, apontando a um menor fator de segurança. A dissertação enfatiza as vantagens de um adequado tratamento estatístico dos parâmetros geotécnicos, a exemplo da recomendação já existente nas normas internacionais como Eurocódigo e outras. O critério construído permite e encoraja análises e decisões racionais no universo das partes interessadas consumidores, projetistas, fiscais de obras, contratantes e comunidade científica promovendo as discussões de forma mais objetiva e harmoniosa sobre o tema.

Investigation of damping effects on statistical energy analysis of coupled structures

The effects of damping on energy sharing in coupled systems are investigated. The approach taken is to compute the forced response patterns of various idealised systems, and from these to calculate the parameters of Statistical Energy Analysis model for the systems using the matrix inversion approach [1]. It is shown that when SEA models are fitted by this procedure, the values of the coupling loss factors are significantly dependent on damping except when it is sufficiently high. For very lightly damped coupled systems, varying the damping causes the values of the coupling loss factor to vary in direct proportion to the internal loss factor. In the limit of zero damping, the coupling loss factors tend to zero. This is a view which contrasts strongly with 'classical' SEA, in which coupling loss factors are determined by the nature of the coupling between subsystems, independent of subsystem damping. One implication of the strong damping dependency is that equipartition of modal energy under low damping does not in general occur. This is contrary to the classical SEA prediction that equipartition of modal energy always occurs if the damping can be reduced to a sufficiently small value. It is demonstrated that the use of this classical assumption can lead to gross overestimates of subsystem energy ratios, especially in multi-subsystem structures. © 1996 Academic Press Limited.

CLADP - THE CAMBRIDGE LINEAR ANALYSIS AND DESIGN PROGRAMS USER REFERENCE MANUAL (4TH ISSUE: APRIL 1983).

CLADP is an engineering software program developed at Cambridge University for the interactive computer aided design of feedback control systems. CLADP contains a wide range of tools for the analysis of complex systems, and the assessment of their performance when feedback control is applied, thus enabling control systems to be designed to meet difficult performance objectives. The range of tools within CLADP include the latest techniques in the field whose central theme is the extension of classical frequency domain concepts (well known and well proven for single loop systems) to multivariable or multiloop systems, and by making extensive use of graphical presentation information is provided in a readily understood form.

Incremental Linear Discriminant Analysis Using Sufficient Spanning Sets and Its Applications

This paper presents an incremental learning solution for Linear Discriminant Analysis (LDA) and its applications to object recognition problems. We apply the sufficient spanning set approximation in three steps i.e. update for the total scatter matrix, between-class scatter matrix and the projected data matrix, which leads an online solution which closely agrees with the batch solution in accuracy while significantly reducing the computational complexity. The algorithm yields an efficient solution to incremental LDA even when the number of classes as well as the set size is large. The incremental LDA method has been also shown useful for semi-supervised online learning. Label propagation is done by integrating the incremental LDA into an EM framework. The method has been demonstrated in the task of merging large datasets which were collected during MPEG standardization for face image retrieval, face authentication using the BANCA dataset, and object categorisation using the Caltech101 dataset. © 2010 Springer Science+Business Media, LLC.

Semi-supervised video segmentation using tree structured graphical models

We present a novel, implementation friendly and occlusion aware semi-supervised video segmentation algorithm using tree structured graphical models, which delivers pixel labels alongwith their uncertainty estimates. Our motivation to employ supervision is to tackle a task-specific segmentation problem where the semantic objects are pre-defined by the user. The video model we propose for this problem is based on a tree structured approximation of a patch based undirected mixture model, which includes a novel time-series and a soft label Random Forest classifier participating in a feedback mechanism. We demonstrate the efficacy of our model in cutting out foreground objects and multi-class segmentation problems in lengthy and complex road scene sequences. Our results have wide applicability, including harvesting labelled video data for training discriminative models, shape/pose/articulation learning and large scale statistical analysis to develop priors for video segmentation. © 2011 IEEE.