Crystal structure and statistical coupling analysis of highly glycosylated peroxidase from royal palm tree (Roystonea regia)

Royal palm tree peroxidase (RPTP) is a very stable enzyme in regards to acidity, temperature, H(2)O(2), and organic solvents. Thus, RPTP is a promising candidate for developing H(2)O(2)-sensitive biosensors for diverse applications in industry and analytical chemistry. RPTP belongs to the family of class III secretory plant peroxidases, which include horseradish peroxidase isozyme C, soybean and peanut peroxidases. Here we report the X-ray structure of native RPTP isolated from royal palm tree (Roystonea regia) refined to a resolution of 1.85 angstrom. RPTP has the same overall folding pattern of the plant peroxidase superfamily, and it contains one heme group and two calcium-binding sites in similar locations. The three-dimensional structure of RPTP was solved for a hydroperoxide complex state, and it revealed a bound 2-(N-morpholino) ethanesulfonic acid molecule (MES) positioned at a putative substrate-binding secondary site. Nine N-glycosylation sites are clearly defined in the RPTP electron-density maps, revealing for the first time conformations of the glycan chains of this highly glycosylated enzyme. Furthermore, statistical coupling analysis (SCA) of the plant peroxidase superfamily was performed. This sequence-based method identified a set of evolutionarily conserved sites that mapped to regions surrounding the heme prosthetic group. The SCA matrix also predicted a set of energetically coupled residues that are involved in the maintenance of the structural folding of plant peroxidases. The combination of crystallographic data and SCA analysis provides information about the key structural elements that could contribute to explaining the unique stability of RPTP. (C) 2009 Elsevier Inc. All rights reserved.

Highly Sensitive Fluorescent Method for the Detection of Cholesterol Aldehydes Formed by Ozone and Singlet Molecular Oxygen

Cholesterol oxidation gives rise to a mixture of oxidized products. Different types of products are generated according to the reactive species being involved. Recently, attention has been focused on two cholesterol aldehydes, 3 beta-hydroxy-5 beta-hydroxy-B-norcholestane-6 beta-carboxyaldehyde (1a) and 3 beta-hydroxy-5-oxo-5,6-secocholestan-6-al (1b). These aldehydes can be generated by ozone-, as well as by singlet molecular oxygen-mediated cholesterol oxidation. It has been suggested that 1b is preferentially formed by ozone and la is preferentially formed by singlet molecular oxygen. In this study we describe the use of 1-pyrenebutyric hydrazine (PBH) as a fluorescent probe for the detection of cholesterol aldehydes. The formation of the fluorescent adduct between la with PBH was confirmed by HPLC-MS/MS. The fluorescence spectra of PBH did not change upon binding to the aldehyde. Moreover, the derivatization was also effective in the absence of an acidified medium, which is critical to avoid the formation of cholesterol aldehydes through Hock cleavage of 5 alpha-hydroperoxycholesterol. In conclusion, PBH can be used as an efficient fluorescent probe for the detection/quantification of cholesterol aldehydes in biological samples. Its analysis by HPLC coupled to a fluorescent detector provides a sensitive and specific way to quantify cholesterol aldehydes in the low femtomol range.

Structure effects of self-assembled Prussian blue confined in highly organized mesoporous TiO(2) on the electrocatalytic properties towards H(2)O(2) detection

Here we report the derivatization of mesoporous TiO(2) thin films for the preparation of H(2)O(2) amperometric sensors. The coordination of the bifunctional ligand 1,10 phenantroline, 5,6 dione on the surface Ti(IV) ions provides open coordination sites for Fe(II) cations which are the starting point for the growth of a layer of Prussian blue polymer. The porous structure of the mesoporous TiO(2) allows the growth, ion by ion of the coordination polymer. Up to four layer of Prussian blue can be deposit without losing the porous structure of the film, which results in an enhanced response of these materials as H(2)O(2) sensors. These porous confined PB modified electrodes are robust sensors that exhibit good reproducibility, environmental stability and high sensitivity towards H(2)O(2) detection. (C) 2010 Elsevier B.V. All rights reserved.

Lipase-Catalyzed Highly Enantioselective Kinetic Resolution of Boron-Containing Chiral Alcohols

The first application of enzymes as catalysts to obtain optically pure boron compounds is described. The kinetic resolution of boron-containing chiral alcohols via enantioselective transesterification catalyzed by lipases was studied. Aromatic, allylic, and aliphatic secondary alcohols containing a boronate ester or boronic acid group were resolved by lipase from Candida antartica (CALB), and excellent E values (E > 200) and high enantiomeric excesses (up to >99%) of both remaining substrates and acetylated product were obtained.

Lithium butylchalcogenolate induced Michael-aldol tandem sequence: easy and rapid access to highly functionalized organochalcogenides and unsaturated compounds

Lithium ""butylchalcogenolates are generated in situ by reacting the elements (S, Se, and Te) with (n)butyl-lithium at 0 degrees C. Reaction of the lithium alkylchalcogenolates with activated alkenes and aldehydes gives the corresponding aldol adducts. The selenium-containing products give Morita-Baylis-Hillman adducts after the oxidation/elimination of the selenoxide. The whole sequence can be performed in a one-pot procedure. (C) 2009 Elsevier Ltd. All rights reserved.

Development of Highly Selective Enzymatic Devices Based on Deposition of Permselective Membranes on Aligned Nanowires

We describe a simple and efficient strategy to fabricate enzymatic devices based on the deposition of glucose oxidase on aligned and highly oriented CoNiMo metallic nanowires. CoNiMo nanowires with an average diameter of 200 nm and length of 50 mu m were electrodeposited on Au-covered alumina substrates via electrodeposition, using alumina membranes as templates. Enzyme-modified electrodes were fabricated via enzyme immobilization using a cross-linker. To minimize nonspecific reactions in the presence of interfering agents, a permselective membrane composed of poly(vinylsulfonic acid) and polyamidoamine dendrimer was deposited via electrostatic interaction. The formation of hydrogen peroxide as a product of the enzymatic reaction was monitored at low overpotential, 0.0 V (vs Ag/AgCl). The detection limit was estimated at 22 mu M under an applied potential of 0.0 V. The apparent Michaelis-Menten constant determined from the Lineweaver-Burke plot was 2 mM.

Ruthenium nanoparticles prepared from ruthenium dioxide precursor: Highly active catalyst for hydrogenation of arenes under mild conditions

The hydrogenation of benzene and benzene derivatives was studied using Ru(0) nanoparticles prepared by a very simple method based on the in situ reduction of the commercially available precursor ruthenium dioxide under mild conditions (75 degrees C and hydrogen pressure 4atm) in imidazolium ionic liquids. Total turnovers (TTO) of 2700 mol/mol Ru were obtained for the conversion of benzene to cyclohexane under solventless conditions and TTO of 1200 mol/mol Ru were observed under ionic liquid biphasic conditions. When corrected for exposed ruthenium atoms, TTO values of 7940 (solventless) and 3530 (biphasic) were calculated for benzene hydrogenation. These reaction rates are higher than those observed for Ru nanoparticles prepared from decomposition of an organometallic precursor in similar conditions. The presence of the partially hydrogenated product cyclohexene was also detected at low conversion rates. (C) 2008 Elsevier B.V. All rights reserved.

Electroanalytical determination of promethazine hydrochloride in pharmaceutical formulations on highly boron-doped diamond electrodes using square-wave adsorptive voltammetry

The electrochemical oxidation of promethazine hydrochloride was made on highly boron-doped diamond electrodes. Cyclic voltammetry experiments showed that the oxidation mechanisms involved the formation of an adsorbed product that is more readily oxidized, producing a new peak with lower potential values whose intensity can be increased by applying the accumulation potential for given times. The parameters were optimized and the highest current intensities were obtained by applying +0.78 V for 30 seconds. The square-wave adsorptive voltammetry results obtained in BR buffer showed two well-defined peaks, dependent on the pH and on the voltammetric parameters. The best responses were obtained at pH 4.0, frequency of 50 s(-1), step of 2 mV, and amplitude of 50 mV. Under these conditions, linear responses were obtained for concentrations from 5.96 x 10(-7) to 4.76 x 10(-6) mol L-1, and calculated detection limits of 2.66 x 10(-8) mol L-1 (8.51 mu g L-1) for peak 1 and of 4.61 x 10(-8) mol L-1 (14.77 mu g L-1) for peak 2. The precision and accuracy were evaluated by repeatability and reproducibility experiments, which yielded values of less than 5.00% for both voltammetric peaks. ne applicability of this procedure was tested on commercial formulations of promethazine hydrochloride by observing the stability, specificity, recovery and precision of the procedure in complex samples. All results obtained were compared to recommended procedure by British Pharmacopeia. The voltammetric results indicate that the proposed procedure is stable and sensitive, with good reproducibility even when the accumulation steps involve short times. It is therefore very suitable for the development of the electroanalytical procedure, providing adequate sensitivity and a reliable method.

Ionized-air-treated curaua fibers as reinforcement for phenolic matrices

Curaua fibers were treated with ionized air to improve the fiber/phenolic matrix adhesion.The treatment with ionized air did not change the thermal stability of the fibers. The impact strength increased with increase in the fiber treatment time. SEM micrographs of the fibers showed that the ionized air treatment led to separation of the fiber bundles. Treatment for 12 h also caused a partial degradation of the fibers, which prompted the matrix to transfer the load to a poorer reinforcing agent during impact, thereby decreasing the impact strength of the related composite. The composites reinforced with fibers treated with ionized air absorbed less water than those reinforced with untreated fibers.

Development and Application of a Highly Selective Biomimetic Sensor for Detection of Captopril, an Important Ally in Hypertension Control

A biomimetic sensor is proposed as a promising new analytical method for determination of captopril in different classes of samples. The sensor was prepared by modifying a carbon paste electrode with iron (II) phthalocyanine bis(pyridine) [FePe(dipy)] complex. Amperometric measurements in a batch analytical mode were first carried out in order to optimize the sensor response. An applied potential lower than 0.2 V vs Ag vertical bar AgCl in 0.1 mol L(-1) of TRIS buffer at pH 8.0 provided the best response, with a linear range of 2.5 x 10(-5) to 1.7 x 10(-4) mol L(-1). A detailed investigation of the selectivity of the sensor, employing seventeen other drugs, was also performed. Recovery studies were carried out using biological and environment samples in order to evaluate the sensor`s potential for use with these sample classes. Finally, the performance of the biomimetic sensor was optimized in a flow injection (FIA) system using a wall jet electrochemical cell. Under optimized flow conditions, a broad linear response range, from 5.0 x 10(-4) to 2.5 x 10(-2) mol L(-1), was obtained for captopril, with a sensitivity of 210 +/- 1 mu A L mol(-1).

Does location matter to explain loan interest rates? evidence from Brazilian highly concentrad local markets

O setor bancário brasileiro é altamente concentrado. Embora concentração não signifique necessariamente que o mercado se comporta de forma não competitiva, o grau de competição é freqüentemente questionado no país. Utilizando uma base de dados extensiva e única do mercado de crédito brasileiro, este trabalho procura avaliar muitos dos fatores que contribuem para a variação nas taxas de juros cobradas pelos bancos nos diferentes mercados locais em duas categorias de empréstimos. A concentração não é significante ou mesmo associada a taxas de juros mais baixas, em parte devido ao papel dos bancos públicos. O prêmio de default é positivo e significante, e há alguma evidência de imperfeição de mercado. Neste trabalho, analisamos também o comportamento de precificação dos bancos em diferentes regiões do país, e encontramos que a localização é importante para explicar as taxas de juros dos empréstimos.

How the full opening of the capital account to highly liquid financial markets led Latin America to two and a half cycles of ‘mania, panic and crash’

Latin America has recently experienced three cycles of capital inflows, the first two ending in major financial crises. The first took place between 1973 and the 1982 ‘debt-crisis’. The second took place between the 1989 ‘Brady bonds’ agreement (and the beginning of the economic reforms and financial liberalisation that followed) and the Argentinian 2001/2002 crisis, and ended up with four major crises (as well as the 1997 one in East Asia) — Mexico (1994), Brazil (1999), and two in Argentina (1995 and 2001/2). Finally, the third inflow-cycle began in 2003 as soon as international financial markets felt reassured by the surprisingly neo-liberal orientation of President Lula’s government; this cycle intensified in 2004 with the beginning of a (purely speculative) commodity price-boom, and actually strengthened after a brief interlude following the 2008 global financial crash — and at the time of writing (mid-2011) this cycle is still unfolding, although already showing considerable signs of distress. The main aim of this paper is to analyse the financial crises resulting from this second cycle (both in LA and in East Asia) from the perspective of Keynesian/ Minskyian/ Kindlebergian financial economics. I will attempt to show that no matter how diversely these newly financially liberalised Developing Countries tried to deal with the absorption problem created by the subsequent surges of inflow (and they did follow different routes), they invariably ended up in a major crisis. As a result (and despite the insistence of mainstream analysis), these financial crises took place mostly due to factors that were intrinsic (or inherent) to the workings of over-liquid and under-regulated financial markets — and as such, they were both fully deserved and fairly predictable. Furthermore, these crises point not just to major market failures, but to a systemic market failure: evidence suggests that these crises were the spontaneous outcome of actions by utility-maximising agents, freely operating in friendly (‘light-touch’) regulated, over-liquid financial markets. That is, these crises are clear examples that financial markets can be driven by buyers who take little notice of underlying values — i.e., by investors who have incentives to interpret information in a biased fashion in a systematic way. Thus, ‘fat tails’ also occurred because under these circumstances there is a high likelihood of self-made disastrous events. In other words, markets are not always right — indeed, in the case of financial markets they can be seriously wrong as a whole. Also, as the recent collapse of ‘MF Global’ indicates, the capacity of ‘utility-maximising’ agents operating in (excessively) ‘friendly-regulated’ and over-liquid financial market to learn from previous mistakes seems rather limited.

How the full opening of the capital account to highly liquid financial markets led Latin America to two and a half cycles of ‘mania, panic and crash’

Latin America has recently experienced three cycles of capital inflows, the first two ending in major financial crises. The first took place between 1973 and the 1982 ‘debt-crisis’. The second took place between the 1989 ‘Brady bonds’ agreement (and the beginning of the economic reforms and financial liberalisation that followed) and the Argentinian 2001/2002 crisis, and ended up with four major crises (as well as the 1997 one in East Asia) — Mexico (1994), Brazil (1999), and two in Argentina (1995 and 2001/2). Finally, the third inflow-cycle began in 2003 as soon as international financial markets felt reassured by the surprisingly neo-liberal orientation of President Lula’s government; this cycle intensified in 2004 with the beginning of a (purely speculative) commodity price-boom, and actually strengthened after a brief interlude following the 2008 global financial crash — and at the time of writing (mid-2011) this cycle is still unfolding, although already showing considerable signs of distress. The main aim of this paper is to analyse the financial crises resulting from this second cycle (both in LA and in East Asia) from the perspective of Keynesian/ Minskyian/ Kindlebergian financial economics. I will attempt to show that no matter how diversely these newly financially liberalised Developing Countries tried to deal with the absorption problem created by the subsequent surges of inflow (and they did follow different routes), they invariably ended up in a major crisis. As a result (and despite the insistence of mainstream analysis), these financial crises took place mostly due to factors that were intrinsic (or inherent) to the workings of over-liquid and under-regulated financial markets — and as such, they were both fully deserved and fairly predictable. Furthermore, these crises point not just to major market failures, but to a systemic market failure: evidence suggests that these crises were the spontaneous outcome of actions by utility-maximising agents, freely operating in friendly (light-touched) regulated, over-liquid financial markets. That is, these crises are clear examples that financial markets can be driven by buyers who take little notice of underlying values — investors have incentives to interpret information in a biased fashion in a systematic way. ‘Fat tails’ also occurred because under these circumstances there is a high likelihood of self-made disastrous events. In other words, markets are not always right — indeed, in the case of financial markets they can be seriously wrong as a whole. Also, as the recent collapse of ‘MF Global’ indicates, the capacity of ‘utility-maximising’ agents operating in unregulated and over-liquid financial market to learn from previous mistakes seems rather limited.