Caracterização de águas do processo e optimização dos consumos de água nos vários circuitos da Petibol, S.A. – Embalagens de Plástico

A empresa Petibol, S.A. – Embalagens de plástico centra-se na produção de embalagens de plástico a partir da matéria-prima Poliestireno Expandido (EPS) e Polipropileno Expandido (EPP). A empresa possui uma preocupação ao nível da qualidade da água e do aproveitamento energético, tendo desta forma surgido a realização do estudo na unidade industrial, com o objectivo de anular e/ou diminuir as possíveis lacunas existentes na unidade industrial. Numa primeira etapa foi realizada uma caracterização global à qualidade da água e à empresa, actualizando-se os esquemas já existentes, contabilizando-se os custos actuais relativamente aos processos no circuito da água (arrefecimento, aquecimento e pressurização), e por fim, efectuou-se um levantamento in loco do circuito de água, relativamente à pressão, temperatura e caudal. Numa fase posterior, foram propostos equipamentos e processos, tendo em vista a colmatação dos problemas identificados, realizando-se um subsequente estudo relativamente aos custos inerentes a esses novos processos. A caracterização à água foi avaliada em diferentes pontos do circuito industrial, tendo-se determinado na Sala de Bombagem que o filtro de areia não possuía as dimensões mais apropriadas, existindo também um problema a nível mecânico associado ao processo de contra-lavagem. Tais factos podem ser a causa da ocorrência de um aumento do teor de sólidos após a passagem na camada filtrante. Relativamente ao amaciador, este deveria amaciar de forma completa a água para alimentação à caldeira, embora se tenha registado à saída do amaciador uma dureza de 21,3 mg/L, denunciando problemas na troca iónica. No que toca à água de alimentação à caldeira, verifica-se a existência de parâmetros que não se encontram de acordo com os critérios enunciados para uma óptima qualidade, sendo eles o pH (10,14), condutividade (363 μS/cm), teor de ferro (1,21 mg/L) e a dureza (16 mg/L). De salientar que somente o teor de cobre, que se encontra em quantidades vestigiais, apresenta-se de acordo com os valores impostos. No que respeita à água da caldeira, esta apresenta parâmetros incompatíveis com os recomendados, sendo eles a condutividade (7350 μS/cm), teor de sólidos dissolvidos (5248 mg/L) e alcalinidade total (780 mg/L). De referir que o valor de pH (11,8) não se encontra de acordo com a aplicação do tratamento “fosfato-pH coordenado”. Em relação aos parâmetros com valores que se encontram dentro dos limites, estes correspondem à dureza (0 mg/L), ao teor de fosfatos (45 mg/L) e teor de sílica (0 mg/L). A água do circuito de arrefecimento foi sujeita a uma análise microbiológica, que corroborou a presença de um biofilme. Um dos problemas enunciados pela empresa, prendia-se com a impossibilidade de descarga, no colector municipal, dos condensados dos compressores, visto apresentarem uma quantidade de óleo de cerca de 43,3 mg/L, equivalente a quatro vezes o valor limite de emissão, de acordo com a legislação municipal. Por fim, o efluente de descarga industrial apresenta um valor de pH (10,3) acima do intervalo permitido por lei (6,0 – 9,0), sendo que a corrente que mais contribui para este acréscimo de pH corresponde à corrente proveniente da água de purga, visto esta apresentar um valor de pH de 12,22. De maneira a contornar os parâmetros enunciados, é proposto a substituição do filtro de areia da Sala de Bombagem, assim como a inserção de um conjunto de medidas de remoção de ferro e desinfecção, sendo a conjugação de arejamento, coagulação, filtração e desinfecção, por parte do hipoclorito, a proposta apresentada. Aos condensados dos compressores é apresentado um sistema de separação, que possibilita a remoção do óleo da água, e uma consequente descarga da mesma. Actualmente, não existe qualquer filtro de areia no circuito de arrefecimento da água, sendo proposto assim esse equipamento, de forma a minorar o desenvolvimento da população microbiana, bem como a permitir uma maior eficiência na transferência de calor na torre de arrefecimento. Relativamente à descarga industrial, é recomendável a colocação de um sistema de regularização automática de pH. A inserção de uma válvula de três vias permite um aproveitamento energético e de água, a partir da confluência da água oriunda dos furos com a água do tanque de água fria, sendo posteriormente alimentada à central de vácuo. No estudo da recuperação energética, um outro equipamento avaliado correspondeu à serpentina, no entanto, verificou-se que a poupança no consumo de gás natural era de apenas 0,005%, o que não se mostrou uma proposta viável. O orçamento de todos os equipamentos é de 11.720,76 €, possibilitando não só um melhor funcionamento industrial, como um menor impacto a nível ambiental. Os custos futuros de funcionamento aumentam em 3,36%, tendo a pressurização um aumento do seu custo em 3,4% em relação ao custo actual, verificando-se um custo anual de 10.781,21€, em relação aos processos de arejamento, coagulação e desinfecção.

Finnish Kullervo and chinese martial arts stories

Introduction: There are many important Finnish plays but, due to language barrier, Finnish drama is seldom exported, particularly to Hong Kong and China.. Objective: To find out differences in mentality between the Finnish and Chinese peoples by comparing the partially localized Chinese translation of Aleksis Kivi’s tragedy, Kullervo, with genuine Chinese martial arts literature. Methodology: 1. Chapman Chen has translated the Finnish classic, Kullervo, directly from Finnish into Chinese and published it in 2005. 2. In Chen’s Chinese translation, cultural markers are domesticated. On the other hand, values, characterization, plot, and rhythm remain unchanged. 3. According to Gideon Tory, the translator has to strike a golden mean between the norms of the source language and the target language. 4. Lau Tingci lists and explicates the essential components of martial arts drama. 5. According to Ehrnrooth’s “Mentality”, equality is the most important value in Finnish culture. Findings: i. Finland emphasizes independence while China emphasizes bilateral relationships. ii. The Finnish people loves freedom, but Gai Sizung argues that the Chinese people is slavish. iii. Finns are mature while many Chinese are, according to Sun Lung-kee (“The Deep Structure of Chinese Culture”; “The Deep Structure of Chinese Sexuality”), fixated at the oral and anal stages. iv. Finnish society highly values equality while Chinese interpersonal relationships are extremely complicated and hierachical. If Kullervo were a genuine Chinese kungfu story, the plot would be much more convoluted. Conclusion: The differences between Finnish and Chinese mentalities are so significant that partially localized or adapted Chinese translations of Finnish drama may still be able to introduce Finnish culture to the Chinese audience.

Effectiveness of see-and-treat for approaching pre-invasive lesions of uterine cervix

OBJECTIVE: To compare the effectiveness between the see-and-treat (S&T) approach and the conventional one (with prior biopsy) for squamous intraepithelial lesions of uterine cervix. METHODS: A cross-sectional study was conducted with 900 nonpregnant women with cytology suggestive of high grade squamous intraepithelial lesions in the city of Rio de Janeiro, Southeastern Brazil, between 1998 and 2004. The S&T approach consists of a large loop excision of the transformation zone procedure and is recommended when cytology is suggestive of high grade squamous intraepithelial lesion, satisfactory colposcopy with abnormalities compatible with the suspected cytological results, and the lesion is limited to the ectocervix or extends up to one centimeter of the endocervical canal. A subgroup of 336 patients whose colposcopy was considered satisfactory was analyzed, and they were divided into two groups for comparison: patients treated without prior biopsy (n = 288) and patients treated after a biopsy showing high grade squamous intraepithelial lesions (n = 48). Patients who were not treated or only treated more than a year later after recruitment at the colposcopy unit were considered dropouts. RESULTS: Of patients recruited during the study period, 71 were not treated or were only treated for at least a year. The overall dropout rate was 7.9% (95% CI: 6.1;9.7). Mean time elapsed between patient recruitment and treatment was 17.5 days in the S&T group and 102.5 days in the prior biopsy group. Dropout rates were 1.4% (95% CI: 0.04;2.7) and 5.% (95% CI: 0;12.3), respectively (p=0.07). The proportion of overtreated cases (negative histology) in the S&T group was 2.0% (95% CI: 0.4;3.6). CONCLUSIONS: The difference in the mean time elapsed between patient recruitment and treatment indicates that S&T is a time-saving approach The proportion of negative cases from using the S&T approach can be regarded as low.

Oxidative Leaching of metals from electronic waste with solutions based on quaternary ammonium salts

The treatment of electric and electronic waste (WEEE) is a problem which receives ever more attention. An inadequate treatment results in harmful products ending up in the environment. This project intends to investigate the possibilities of an alternative route for recycling of metals from printed circuit boards (PCBs) obtained from rejected computers. The process is based on aqueous solutions composed of an etchant, either 0.2 M CuCl2.2H2O or 0.2 M FeCl3.6H2O, and a quaternary ammonium salt (quat) such as choline chloride or chlormequat. These solutions are reminiscent of deep eutectic solvents (DES) based on quats. DES are quite similar to ionic liquids (ILs) and are used as well as alternative solvents with a great diversity of physical properties, making them attractive for replacement of hazardous, volatile solvents (e.g. VOCs). A remarkable difference between genuine DES and ILs with the solutions used in this project is the addition of rather large quantities of water. It is shown the presence of water has a lot of advantages on the leaching of metals, while the properties typical for DES still remain. The oxidizing capacities of Cu(II) stem from the existence of a stable Cu(I) component in quat based DES and thus the leaching stems from the activity of the Cu(II)/Cu(I) redox couple. The advantage of Fe(III) in combination with DES is the fact that the Fe(III)/Fe(II) redox couple becomes reversible, which is not true in pure water. This opens perspectives for regeneration of the etching solution. In this project the leaching of copper was studied as a function of gradual increasing water content from 0 - 100w% with the same concentration of copper chloride or iron(III) chloride at room temperature and 80ºC. The solutions were also tested on real PCBs. At room temperature a maximum leaching effect for copper was obtained with 30w% choline chloride with 0.2 M CuCl2.2H2O. The leaching effect is still stronger at 80°C, b ut of course these solutions are more energy consuming. For aluminium, tin, zinc and lead, the leaching was faster at 80ºC. Iron and nickel dissolved easily at room temperature. The solutions were not able to dissolve gold, silver, rhodium and platinum.

Socioeconomic inequities in the health and nutrition of children in low/middle income countries

OBJECTIVE: To describe the effects of social inequities on the health and nutrition of children in low and middle income countries. METHODS: We reviewed existing data on socioeconomic disparities within-countries relative to the use of services, nutritional status, morbidity, and mortality. A conceptual framework including five major hierarchical categories affecting inequities was adopted: socioeconomic context and position, differential exposure, differential vulnerability, differential health outcomes, and differential consequences. The search of the PubMed database since 1990 identified 244 articles related to the theme. Results were also analyzed from almost 100 recent national surveys, including Demographic Health Surveys and the UNICEF Multiple Indicator Cluster Surveys. RESULTS: Children from poor families are more likely, relative to those from better-off families, to be exposed to pathogenic agents; once they are exposed, they are more likely to become ill because of their lower resistance and lower coverage with preventive interventions. Once they become ill, they are less likely to have access to health services and the quality of these services is likely to be lower, with less access to life-saving treatments. As a consequence, children from poor family have higher mortality rates and are more likely to be undernourished. CONCLUSIONS: Except for child obesity and inadequate breastfeeding practices, all the other adverse conditions analyzed were more prevalent in children from less well-off families. Careful documentation of the multiple levels of determination of socioeconomic inequities in child health is essential for understanding the nature of this problem and for establishing interventions that can reduce these differences.

Novos artigos e sistemas no processamento do couro

A necessidade de diminuir os consumos de energia, não só por questões financeiras mas também por questões ambientais, faz com que sejam feitos esforços no sentido da implementação de energias renováveis bem como da melhoria e expansão das soluções técnicas já conhecidas. Uma das maiores fontes de energia renovável, senão mesmo a maior, é a energia solar que, no futuro, terá uma contribuição muito significativa, quer na satisfação dos consumos energéticos, quer na racionalização da sua utilização, isto é, na melhoria da eficiência do consumo. O presente trabalho focou-se na procura de um sistema solar térmico para o pré-aquecimento da água quente a ser utilizada numa fábrica de curtumes, a empresa Curtumes Aveneda, Lda. Em simultâneo, desenvolveram-se e optimizaram-se processos de produtos específicos que o mercado exige actualmente, visando uma economia de recursos (matérias-primas, água e energia), objectivando sempre a sua viabilidade económica. No que respeita à procura do sistema solar térmico, inicialmente foram realizados levantamentos relativos ao consumo de água, quente e fria, na respectiva empresa. Esta avaliação focou-se em todos os sectores consumidores intensivos de água, tais como a ribeira, curtume e a tinturaria, excluindo o sector de acabamento uma vez que o consumo aqui é insignificante relativamente aos sectores citados anteriormente. Com base no levantamento efectuado foi dimensionado um sistema solar térmico para o pré aquecimento da água quente que conduz a uma economia anual de 107.808,3 kWh de energia térmica, representativa de 29% do consumo anual de energia térmica de aquecimento de água. Foi efectuada análise económica deste investimento que mostrou um índice de rentabilidade superior à unidade e um tempo de retorno do investimento de 9 anos. Desenvolveu-se com sucesso um produto de couro a partir de wet-blue, designado por crispado, produto normalmente produzido a partir da pele em tripa e muito difícil de obter a partir de wet-blue. Este produto caracteriza-se pela sua forma granular irregular e firme da pele. O processo desenvolvido foi ainda optimizado no sentido da redução do consumo de água e de energia. Tendo em conta a necessidade da empresa também se tentou melhorar as características do couro wet-white, muito solicitado actualmente, com resultados positivos no que respeita à temperatura de contracção do couro e às propriedades físico-mecânicas mas sem se atingir o principal objectivo que seria tornar a cor mais clara e mais pura. Foram desta forma dados contributos importantes para a empresa que, assim, dimensionou um sistema mais económico para o aquecimento de água que vai adoptar e ficou com um processo disponível para produzir um produto até então não conseguido.

Levantamento e integração energética do processo de refinação de açúcar

Este trabalho foi realizado no âmbito da disciplina de Dissertação/Estágio do ramo de Optimização Energética na Indústria Química, do Mestrado em Engenharia Química do Instituto Superior de Engenharia do Porto e foi desenvolvido na empresa Refinarias de Açúcar Reunidas, S.A (RAR Açúcar). Face à crise energética mundial e à globalização, o custo de produção aumentou consideravelmente nos processos industriais e os mercados ficaram mais competitivos. Estes aspectos levam a que cada vez mais os responsáveis industriais se concentrem em encontrar soluções que contrariem estes aspectos. Nesta perspectiva, a questão da conservação da energia na indústria torna-se uma medida fundamental a adoptar na política interna de uma indústria. Na década de 80 as técnicas de integração revelaram-se como uma ferramenta muito útil na área da integração térmica de processos. O conceito destas técnicas focaliza-se numa maior recuperação de energia, um menor consumo de utilidades e consequentemente uma diminuição de custos. Este trabalho tem como objectivo realizar um Levantamento e uma Integração Energética do Processo de Refinação de Açúcar. O conhecimento profundo do processo de refinação do açúcar, assim como o conhecimento de todas as fases do processo da empresa foram um ponto de partida fundamental para o desenrolar do trabalho. O levantamento energético, a nível térmico, a todos os equipamentos das linhas de produção forneceu os dados necessários para a Integração do Processo de Refinação de Açúcar através da Metodologia de Pinch. Como resultado da aplicação da Metodologia Pinch foram introduzidos oito permutadores de calor obtendo-se uma recuperação de calor igual a (confidencial) kJ/dia aliada a um investimento de (confidencial). A recuperação energética alcançada traduz-se numa poupança de (confidencial)de nafta/ano sendo o investimento proposto recuperado em 1,2 anos.

Should the U.S. adapt to the world? The first debate on american exceptionalism and its impact on the founding of the United States

This paper aims at putting into perspective the recent, post 9/11 debate on the United States‘ alleged exceptionalism and its impact on the definition of American foreign policy. It reminds the readers that the United States was born as a result of a similar debate, at a time when a crucial choice for its future was to be made. Indeed, the Founding Fathers discarded the revolutionary idea that America was altogether different from other (European) nations and, as such, could succeed in saving republicanism and concentrate on domestic affairs. As Gordon Wood and Harvey Mansfield have shown, the 1787 version of republicanism stood as a departure from its earlier version, and such a change was necessary to the creation of a full-fledged federation, therefore paving the way to the current powerful Federal Republic. The early failure of the exceptionalist creed did not cause its disappearance, as the contemporary form of exceptionalism demonstrates, but created conditions that made an enduring and powerful influence very difficult.

Quantificação do valor ambiental em edifícios: estudo de um caso prático

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil

A waste management school approach towards sustainability

Education towards sustainability in Chemical Engineering (CEng) gave birth to awaste management program (WMP) at Instituto Superior de Engenharia do Porto, in Portugal. It involves students, teachers, and laboratory technicians. It aims to enhance the conscientiousness of the decision-maker next generation for saving resources, managing wastes, and at same time to develop applied chemistry understanding. This program was implemented in 1999 and is responsible for management and fate of all inorganic wastewater providing from training experimental activities of the CEng degree. An immediate reduction of wastes at their source was first defined. Wastes were collected separately and were reused, recycled or chemically treated, and after analytically controlled as legally imposed. Solids formed after this program were recycled, purified or followed suitable elimination. Global results point out environmental, pedagogical, and social benefits. Active participants are aware, in agreement, and publicly committed to the WMP.

Diz-me porque poupas, dir-te-ei como te comportas

Embora Portugal seja um país onde tradicionalmente se mantinham elevados níveis de poupança, essa tendência esbateu-se na década passada, fruto de fatores diversos e de uma realidade sócio-económica menos favorável. Todavia, na presente conjuntura económica reveste-se de particular importância a adoção de comportamentos de poupança. É, por isso, necessário compreender claramente os fatores que estão na sua origem. Neste estudo, que envolveu uma amostra de 835 portugueses, procurámos investigar a relação entre as motivações de poupança e os comportamentos de poupança dos portugueses. Os resultados indicam que as motivações de poupança estão relacionadas com a perceção da capacidade de gestão financeira, com a elaboração de um orçamento familiar e com a frequência de poupança dos agregados familiares em Portugal.

Constructing and Using Multimodal Narratives to Research in Science Education: Contributions Based on Practical Classroom

This study deals with the problem of how to collect genuine and useful data about science classroom practices, and preserving the complex and holistic nature of teaching and learning. Additionally, we were looking for an instrument that would allow comparability and verifiability for teaching and research purposes. Given the multimodality of teaching and learning processes, we developed the multimodal narrative (MN), which describes what happens during a task and incorporates data such as examples of students’ work.

Environmental data management in the Sado Estuary

Estuaries are perhaps the most threatened environments in the coastal fringe; the coincidence of high natural value and attractiveness for human use has led to conflicts between conservation and development. These conflicts occur in the Sado Estuary since its location is near the industrialised zone of Peninsula of Setúbal and at the same time, a great part of the Estuary is classified as a Natural Reserve due to its high biodiversity. These facts led us to the need of implementing a model of environmental management and quality assessment, based on methodologies that enable the assessment of the Sado Estuary quality and evaluation of the human pressures in the estuary. These methodologies are based on indicators that can better depict the state of the environment and not necessarily all that could be measured or analysed. Sediments have always been considered as an important temporary source of some compounds or a sink for other type of materials or an interface where a great diversity of biogeochemical transformations occur. For all this they are of great importance in the formulation of coastal management system. Many authors have been using sediments to monitor aquatic contamination, showing great advantages when compared to the sampling of the traditional water column. The main objective of this thesis was to develop an estuary environmental management framework applied to Sado Estuary using the DPSIR Model (EMMSado), including data collection, data processing and data analysis. The support infrastructure of EMMSado were a set of spatially contiguous and homogeneous regions of sediment structure (management units). The environmental quality of the estuary was assessed through the sediment quality assessment and integrated in a preliminary stage with the human pressure for development. Besides the earlier explained advantages, studying the quality of the estuary mainly based on the indicators and indexes of the sediment compartment also turns this methodology easier, faster and human and financial resource saving. These are essential factors to an efficient environmental management of coastal areas. Data management, visualization, processing and analysis was obtained through the combined use of indicators and indices, sampling optimization techniques, Geographical Information Systems, remote sensing, statistics for spatial data, Global Positioning Systems and best expert judgments. As a global conclusion, from the nineteen management units delineated and analyzed three showed no ecological risk (18.5 % of the study area). The areas of more concern (5.6 % of the study area) are located in the North Channel and are under strong human pressure mainly due to industrial activities. These areas have also low hydrodynamics and are, thus associated with high levels of deposition. In particular the areas near Lisnave and Eurominas industries can also accumulate the contamination coming from Águas de Moura Channel, since particles coming from that channel can settle down in that area due to residual flow. In these areas the contaminants of concern, from those analyzed, are the heavy metals and metalloids (Cd, Cu, Zn and As exceeded the PEL guidelines) and the pesticides BHC isomers, heptachlor, isodrin, DDT and metabolits, endosulfan and endrin. In the remain management units (76 % of the study area) there is a moderate impact potential of occurrence of adverse ecological effects and in some of these areas no stress agents could be identified. This emphasizes the need for further research, since unmeasured chemicals may be causing or contributing to these adverse effects. Special attention must be taken to the units with moderate impact potential of occurrence of adverse ecological effects, located inside the natural reserve. Non-point source pollution coming from agriculture and aquaculture activities also seem to contribute with important pollution load into the estuary entering from Águas de Moura Channel. This pressure is expressed in a moderate impact potential for ecological risk existent in the areas near the entrance of this Channel. Pressures may also came from Alcácer Channel although they were not quantified in this study. The management framework presented here, including all the methodological tools may be applied and tested in other estuarine ecosystems, which will also allow a comparison between estuarine ecosystems in other parts of the globe.

Device power management for real-time embedded systems

A large part of power dissipation in a system is generated by I/O devices. Increasingly these devices provide power saving mechanisms to inter alia enhance battery life. While I/O device scheduling has been studied in the past for realtime systems, the use of energy resources by these scheduling algorithms may be improved. These approaches are crafted considering a huge overhead of device transition. The technology enhancement has allowed the hardware vendors to reduce the device transition overhead and energy consumption. We propose an intra-task device scheduling algorithm for real time systems that allows to shut-down devices while ensuring the system schedulability. Our results show an energy gain of up to 90% in the best case when compared to the state-of-the-art.

Online intra-task device scheduling for hard real-time systems

A large part of power dissipation in a system is generated by I/O devices. Increasingly these devices provide power saving mechanisms, inter alia to enhance battery life. While I/O device scheduling has been studied in the past for realtime systems, the use of energy resources by these scheduling algorithms may be improved. These approaches are crafted considering a very large overhead of device transitions. Technology enhancements have allowed the hardware vendors to reduce the device transition overhead and energy consumption. We propose an intra-task device scheduling algorithm for real time systems that allows to shut-down devices while ensuring system schedulability. Our results show an energy gain of up to 90% when compared to the techniques proposed in the state-of-the-art.