Influence of energy and polymer-escapsulated methionine supplements on mohair growth and fibre diameter of Angora goats fed at maintenance

We studied the fleece production of Angora wether goats provided with energy, to maintain liveweight, and polymer-encapsulated methionine while they were fed on poor quality roughage rations in early summer. Forty goats (mean fleece-free liveweight 28.5 kg) were randomly allotted to 5 treatments and housed individually for 12 weeks. The treatments were: control, fed to lose 5 kg liveweight; M, fed to maintain liveweight; and 3 maintenance rations with either 0.5, 1 or 2 g day-1 of polymer-encapsulated methionine. The basal ration was oaten chaff (56.8% digestible dry matter) and all maintenance- fed goats received a supplement of 150 g day- 1 gristed barley. Goats required an estimated 267 kJ ME kg-0.75 day-1 to maintain liveweight. Goats fed the control diet grew less mohair (P<0.05) with reduced mean fibre diameter (P< 0.05) than maintenance-fed goats (4.9 g day-1, 30.0 pm compared with 5.8 g day-1, 31.9 pm). For maintenance-fed animals, the addition of 1 g day- methionine (0.15% of dry matter intake) increased mohair growth by 0.8g day-1 (P<0.075). Feeding barley to prevent liveweight loss and feeding polymer-encapsulated methionine at maintenance is unlikely to result in economic responses in mohair production of goats grazing low quality summer pastures

Relationship between processing, surface energy and bulk properties of ultrafine silk particles

Silk particles of different sizes and shapes were produced by milling and interactions with a series of polar and non-polar gaseous probes were investigated using an inverse gas chromatography technique. The surface energy of all silk materials is mostly determined by long range dispersive interactions such as van der Waals forces. The surface energy increases and surface energy heterogeneity widens after milling. All samples have amphoteric surfaces and the concentration of acidic groups increases after milling while the surfaces remain predominantly basic. We also examined powder compression and flow behaviours using a rheometer. Increase in surface energy, surface area, and static charges in sub-micron air jet milled particles contributed to their aggregation and therefore improved flowability. However they collapse under large pressures and form highly cohesive powder. Alkaline hydrolysis resulted in more crystalline fibres which on milling produced particles with higher density, lower surface energy and improved flowability. The compressibility, bulk density and cohesion of the powders depend on the surface energy as well as on particle size, surface area, aggregation state and the testing conditions, notably the consolidated and unconsolidated states. The study has helped in understanding how surface energy and flowability of particles can be changed via different fabrication approaches.

The correlation between stacking fault energy and the work hardening behaviour of high-mn twinning induced plasticity steel tested at various temperatures

High-Mn Twinning Induced Plasticity (TWIP) steels have superior mechanical properties, which make them promising materials in automotive industry to improve the passenger safety and the fuel consumption. The TWIP steels are characterized by high work hardening rates due to continuous mechanical twin formation during the deformation. Mechanical twinning is a unique deformation mode, which is highly governed by the stacking fault energy (SFE). The composition of steel alloy was Fe-18Mn-0.6C-1Al (wt.%) with SFE of about 25-30 mJ/m2 at room temperature. The SFE ensures the mechanical twinning to be the main deformation mechanism at room temperature. The microstructure, mechanical properties, work hardening behaviour and SFE of the steel was studied at the temperature range of ambient ≤T[°C]≤ 400°C. The mechanical properties were determined using Instron tensile testing machine with 30kN load cell and strain rate of 10-3s-1 and the work hardening behaviour curves were generated using true stress and true strain data. The microstructure after deformation at different temperatures was examined using Zeiss Supra 55VP SEM. It was found that an increase in the deformation temperature raised the SFE resulting in the deterioration of the mechanical twinning that led to decrease not only in the strength but also in the total strain of the steel. A correlation between the temperature, the SFE, the mechanical twinning, the mechanical properties and the work hardening rate was also found. © (2014) Trans Tech Publications, Switzerland.

Food sources of total energy and nutrients among U.S. infants and toddlers: national health and nutrition examination survey 2005-2012

Understanding the dietary intakes of infants and toddlers is important because early life nutrition influences future health outcomes. The aim of this study was to determine the dietary sources of total energy and 16 nutrients in a nationally representative sample of U.S. infants and toddlers aged 0-24 months. Data from the 2005-2012 National Health and Nutrition Examination Survey were analyzed. Dietary intake was assessed in 2740 subjects using one 24-h dietary recall. The population proportion was used to determine the contribution of foods and beverages to nutrient intakes. Overall infant formulas and baby foods were the leading sources of total energy and nutrients in infants aged 0-11.9 months. In toddlers, the diversity of food groups contributing to nutrient intakes was much greater. Important sources of total energy included milk, 100% juice and grain based mixed dishes. A number of foods of low nutritional quality also contributed to energy intakes including sweet bakery products, sugar-sweetened beverages and savory snacks. Overall non-flavored milks and ready-to-eat cereals were the most important contributors to micronutrient intakes. In conclusion this information can be used to guide parents regarding appropriate food selection as well as inform targeted dietary strategies within public health initiatives to improve the diets of infants and toddlers.

The effect of offering an energy and protein supplement to grazing canchim beef cows either postpartum or both pre- and postpartum on lipid blood metabolites and folliculogenesis

This study was designed to evaluate the effect of nutritional supplementation offered during the pre- and postpartum periods on serum cholesterol, triglycerides and total lipids of Canchim beef cows and their relationship with folliculogenesis. Thirty cows with predicted calving date between September and October, kept in pastures of Brachiaria brizantha cv. Marandu together with their calves, were randomly distributed into three experimental groups: the first received only a mineral mixture (Control Group, CG); the second group received a concentrate with 16% crude protein/kg dry matter (DM) and 3000 kcal digestible energy/kg DM offered for 45 days prepartum and 120 days postpartum (PREG); the third group received the concentrate from parturition until the 120th day postpartum (POSG). Consumption was estimated at 1% of body weight, and each cow received approximately 4.0 kg/day (fresh weight) of supplement. Blood samples were taken and an ultrasound examination of the ovaries was performed twice a week until the 60th day postpartum. The body condition score (BCS) and the weight of the cows were recorded at 15-day intervals from calving until the 60th day postpartum. Data are presented as mean +/- SEM. Mean weight and BCS at calving were, respectively, 448 +/- 54.9 kg and 6.2 +/- 0.25 (PREG); 432 +/- 71.1 kg and 5.5 +/- 0.69 (POSG); and 434 +/- 66.4 kg and 5.5 +/- 0.69 (CG). Total cholesterol (TC), triglycerides (TRIG) and total lipids (TLIP) were measured using colorimetry until the 60th day postpartum. TC averages were PREG 186 +/- 62.6 mg/dL, POSG 159 +/- 43.1 mg/dL and CG 133 +/- 35.1 mg/dL (P < 0.05). For TRIG, the means were PREG 29 +/- 11.3 mg/dL (P < 0.05), POSG 24 +/- 8.1 mg/dL and CG 26 +/- 12.1 mg/dL (P > 0.05). Serum concentrations of TLIP were PREG 588 +/- 145.6 mg/dL, POSG 512 +/- 137.6 mg/dL and CG 452 +/- 122.4 mg/dL (P < 0.05). The first dominant follicle (DF) was identified on Day 21 +/- 10.3 (PREG), 36 +/- 28.5 (POSG) and 51 +/- 32.8 (CG) after calving. The difference between PREG and CG was significant (P < 0.05). TC was positively correlated with the calving to first estrus interval (P < 0.05). Results showed that nutritional supplementation before parturition assured good body condition at calving and suggested that it was effective at increasing cholesterol availability to maintain ovarian follicle function and to favor earlier resumption of ovarian activity. (C) 2010 Published by Elsevier B.V.

Effect of dietary energy and stocking density on the performance and sensible heat loss of broilers reared under tropical winter conditions

The objective of the present study was to evaluate the effects of different dietary energy levels and stocking densities on the thermoregulating parameters, live performance, and carcass traits of broilers reared under tropical winter conditions at different times of the day. In total, 1,312 one-d-old male broilers were used. Birds were allotted to three different stocking densities (10, 14 or 18 birds/m²) and two dietary energy levels (2900 or 3200 kcal ME/kg). The following parameters were evaluated:radiant heat load (RHL), rectal temperature (RT), feed intake (FI), weight gain (WG), feed conversion ratio (FCR), livability (L), production of live weight per area (WA), and carcass yield. Stocking density did not affect sensible heat loss (SRL) or rectal temperature (RT); however, as expected, sensible heat loss (SRL) and RT were influenced by time of the day, with higher values in the morning and in the afternoon, respectively. There was no effect of treatment (p>0.05) on carcass or parts yield. Feed intake was reduced in 3%, whereas weight gain and feed conversion ratio improved in 8 and 10%, respectively, as dietary energy level increased. on the other hand, stocking density did not influence live performance or carcass traits. Based on the present results, it is concluded that sensible heat loss depends on dietary energy levels and particularly on time of the day. Therefore, environmental house management is suggested during tropical winters in order to reduce differences between broiler skin and environmental temperatures in the morning and in the afternoon.

Effects of energy and protein levels on egg quality and performance of laying hens at early second production cycle

One hundred sixty-two commercial 70-wk-old ISA Brown laying hens, previously subjected to induced molting by feed restriction, were distributed in a completely randomized design with 3 x 3 factorial arrangement (i.e., 3 metabolizable energy levels: 2,850; 2,950, and 3,050 kcal of ME/kg) and 3 protein levels (16, 18, and 20% CP), which totaled 9 treatments with 3 replicates of 6 birds each. Experimental diets were offered to birds after the feed restriction period. Performance and egg quality parameters were evaluated in 14-d intervals from the 4th to 12th weeks after forced molting for a total of 4 evaluation periods. Increases in dietary energy and protein levels did not improve performance or egg quality. The levels of 2,850 kcal of ME and 16% protein were sufficient for laying hens starting the second production cycle without decreasing their performance or egg quality.

Energy and lysine for broilers from 44 to 55 days of age

An experiment was conducted to evaluate the performance and carcass yield of broilers at 55 days of age fed diets with different levels of metabolizable energy and lysine. Evaluated data of performance were weight gain, feed intake, energy intake, lysine intake, caloric conversion and feed conversion. Carcass assessment was performed based on data from carcass yield, breast weight, whole wings, whole legs, back, head + neck, feet and abdominal fat. A 3 x 3 factorial arrangement was used, with 3 levels of metabolizable energy (3,200; 3,400 and 3,600 kcal ME/kg) and 3 lysine levels (0.95%; 1.05% and 1.15%). There was no interaction between the two factors. Nevertheless, increasing levels of metabolizable energy improved weight gain (745 g; 841 g and 910 g, respectively) and feed intake was higher in broilers receiving the diets with 3,200 and 3,600 kcal ME/kg. Overall performance was not affected by lysine levels. Feed conversion values were 2.69, 2.42 and 2.14 for birds fed diets with 3,200; 3,400 and 3,600 kcal ME/kg, respectively. Carcass yield and breast weight increased with higher levels of energy and lysine in the diets.

Prediction equations to estimate the demand of energy and crude protein for maintenance, gain and egg production for laying Japanese quails

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Energy and amino acid content in phase 1 nursery diet: piglet performance and body chemical composition

Avaliaram-se os efeitos da densidade de energia metabolizável (EM) e lisina digestível (LIS) sobre o desempenho e a composição corporal de leitões após o desmame. Utilizaram-se 114 animais desmamados aos 7,4 ± 0,80 kg; desses animais, 108 foram alojados na unidade de creche e 6 foram abatidos no dia do desmame para determinação dos dados comparativos da composição química corporal. Seis densidades de nutrientes foram estipuladas a partir de estudo anterior, com base na maior retenção de nitrogênio, mantendo-se as seguintes relações EM:LIS nas dietas experimentais: 3.390:1,291; 3.450:1,409; 3.650:1,411; 3.780:1,461; 3.940:1,507; e 4.109 kcal/kg EM:1,564% LIS. As dietas experimentais foram oferecidas durante 13 dias, quando os leitões atingiram o peso de 12,986 ± 1,449 kg. Avaliaram-se os prováveis efeitos residuais da densidade nutricional no desempenho subseqüente dos leitões. Ao término da fase inicial-1, seis leitões de cada densidade foram abatidos para determinação da composição química nas frações corporais e no corpo vazio. Não houve influência significativa dos níveis nutricionais no desempenho dos leitões ao término da avaliação. Os resultados de conversão alimentar e composição corporal ratificam o nível indicado em estudo anterior, de 4 g LIS/Mcal. O aumento da densidade de energia e lisina confirma a necessidade da correta relação entre ambos para assegurar o melhor desempenho dos leitões na fase inicial de crescimento.