Green tea in transdermal formulation: HPLC method for quality control and in vitro drug release assays

RP-HPLC based analytical method for use in both quality control of green tea in a semisolid formulation and for in vitro drug release assays was developed and validated. The method was precise (CV < 5%), accurate (recovery between 98% and 102%), linear (R² > 0.99), robust, and specific for the determination of epigallocatechin 3-gallate (EGCG), caffeine (CAF), and gallic acid (GA). In a diffusion cell chamber, the release rate of EGCG was 8896.01 µg cm-2. This data showed that EGCG will be able to exert its systemic activity when delivered though the transdermal formulation, due to its good flux rates with the synthetic membrane.

Evaluation of gas diffusion electrodes as detectors in amperometric hydrogen sensors

This work is directed to the study and evaluation of gas diffusion electrodes as detectors in hydrogen sensors. Electrochemical experiments were carried out with rotating disk electrodes with a thin porous coating of the catalyst as a previous step to select useful parameters for the sensor. An experimental arrangement made in the laboratory that simulates the sensor was found appropriate to detect volumetric hydrogen percentages above 0.25% in mixtures H2:N2. The system shows a linear response for volumetric percentages of hydrogen between 0.25 and 2 %.

Comparison of diffusion models for description of osmotic dehydration of radish slices dipped in brine

ABSTRACT This paper aims at describing the osmotic dehydration of radish cut into cylindrical pieces, using one- and two-dimensional analytical solutions of diffusion equation with boundary conditions of the first and third kind. These solutions were coupled with an optimizer to determine the process parameters, using experimental data. Three models were proposed to describe the osmotic dehydration of radish slices in brine at low temperature. The two-dimensional model with boundary condition of the third kind well described the kinetics of mass transfers, and it enabled prediction of moisture and solid distributions at any given time.

Panel Method Formulation for Oscillating Airfoils in Sonic Flow

The mathematical model for two-dimensional unsteady sonic flow, based on the classical diffusion equation with imaginary coefficient, is presented and discussed. The main purpose is to develop a rigorous formulation in order to bring into light the correspondence between the sonic, supersonic and subsonic panel method theory. Source and doublet integrals are obtained and Laplace transformation demonstrates that, in fact, the source integral is the solution of the doublet integral equation. It is shown that the doublet-only formulation reduces to a Volterra integral equation of the first kind and a numerical method is proposed in order to solve it. To the authors' knowledge this is the first reported solution to the unsteady sonic thin airfoil problem through the use of doublet singularities. Comparisons with the source-only formulation are shown for the problem of a flat plate in combined harmonic heaving and pitching motion.

Diffusion Tensor Imaging as a Diagnostic and Research Tool: A Study on Preterm Infants

Diffusion tensor imaging (DTI) is an advanced magnetic resonance imaging (MRI) technique. DTI is based on free thermal motion (diffusion) of water molecules. The properties of diffusion can be represented using parameters such as fractional anisotropy, mean diffusivity, axial diffusivity, and radial diffusivity, which are calculated from DTI data. These parameters can be used to study the microstructure in fibrous structure such as brain white matter. The aim of this study was to investigate the reproducibility of region-of-interest (ROI) analysis and determine associations between white matter integrity and antenatal and early postnatal growth at term age using DTI. Antenatal growth was studied using both the ROI and tract-based spatial statistics (TBSS) method and postnatal growth using only the TBSS method. The infants included to this study were born below 32 gestational weeks or birth weight less than 1,501 g and imaged with a 1.5 T MRI system at term age. Total number of 132 infants met the inclusion criteria between June 2004 and December 2006. Due to exclusion criteria, a total of 76 preterm infants (ROI) and 36 preterm infants (TBSS) were accepted to this study. The ROI analysis was quite reproducible at term age. Reproducibility varied between white matter structures and diffusion parameters. Normal antenatal growth was positively associated with white matter maturation at term age. The ROI analysis showed associations only in the corpus callosum. Whereas, TBSS revealed associations in several brain white matter areas. Infants with normal antenatal growth showed more mature white matter compared to small for gestational age infants. The gestational age at birth had no significant association with white matter maturation at term age. It was observed that good early postnatal growth associated negatively with white matter maturation at term age. Growth-restricted infants seemed to have delayed brain maturation that was not fully compensated at term, despite catchup growth.

Numerical simulation of two-chamber plasma sources using finite element method

Numerical simulation of plasma sources is very important. Such models allows to vary different plasma parameters with high degree of accuracy. Moreover, they allow to conduct measurements not disturbing system balance.Recently, the scientific and practical interest increased in so-called two-chamber plasma sources. In one of them (small or discharge chamber) an external power source is embedded. In that chamber plasma forms. In another (large or diffusion chamber) plasma exists due to the transport of particles and energy through the boundary between chambers.In this particular work two-chamber plasma sources with argon and oxygen as active mediums were onstructed. This models give interesting results in electric field profiles and, as a consequence, in density profiles of charged particles.

Epidemiological characterization of resistance and PCR typing of Shigella flexneri and Shigella sonnei strains isolated from bacillary dysentery cases in Southeast Brazil

Shigella spp are Gram-negative, anaerobic facultative, non-motile, and non-sporulated bacilli of the Enterobacteriaceae family responsible for "Shigellosis" or bacillary dysentery, an important cause of worldwide morbidity and mortality. However, despite this, there are very few epidemiological studies about this bacterium in Brazil. We studied the antibiotic resistance profiles and the clonal structure of 60 Shigella strains (30 S. flexneri and 30 S. sonnei) isolated from shigellosis cases in different cities within the metropolitan area of Campinas, State of São Paulo, Brazil. We used the following well-characterized molecular techniques: enterobacterial repetitive intergenic consensus, repetitive extragenic palindromic, and double-repetitive element-polymerase chain reaction to characterize the bacteria. Also, the antibiotic resistance of the strains was determined by the diffusion disk method. Many strains of S. flexneri and S. sonnei were found to be multi-resistant. S. flexneri strains were resistant to ampicillin in 83.3% of cases, chloramphenicol in 70.0%, streptomycin in 86.7%, sulfamethoxazole in 80.0%, and tetracycline in 80.0%, while a smaller number of strains were resistant to cephalothin (3.3%) and sulfazotrim (10.0%). S. sonnei strains were mainly resistant to sulfamethoxazole (100.0%) and tetracycline (96.7%) and, to a lesser extent, to ampicillin (6.7%) and streptomycin (26.7%). Polymerase chain reaction-based typing supported the existence of specific clones responsible for the shigellosis cases in the different cities and there was evidence of transmission between cities. This clonal structure would probably be the result of selection for virulence and resistance phenotypes. These data indicate that the human sanitary conditions of the cities investigated should be improved.

Prospects of Bitcoin diffusion

Currency is something people deal with every day in their lives. The contemporary society is very much revolving around currencies. Even though technological development has been rapid, the principle of currency has stayed relatively unchanged for a long time. Bitcoin is a digital currency that introduced an alternative to other digital currencies, and to the traditional physical currencies. Bitcoin is peer-to-peer, open source, and it erases the need of a third party in transactions. Bitcoin has since inception gained certain fame, but it has not established itself as a common currency in the world. The purpose of this study was to analyse what kind of potential does Bitcoin have to become a widely accepted currency in day-to-day transactions. The main research question was divided into three sub questions: • What kind of a process is the diffusion of new innovations? • What kinds of factors speak for the wider adoption of Bitcoin? • What kinds of factors speak against the wider adoption of Bitcoin? The purpose of the study was approached by having diffusion of innovations as the theoretical framework. The four elements in diffusion of innovations are, innovation, communication, time, and social system. The theoretical framework is applied to Bitcoin, and the research questions answered by analysing Bitcoin’s potential diffusion prospects. The body of research data consisted of media texts and statistics. In this study, content analysis was the research method. The main findings of the study are that Bitcoin has clear strengths, but it faces a large amount of uncertainty. Bitcoin’s strong areas are the transactions. They are fast, easy, and cheap. From the innovation diffusion perspective Bitcoin is still relatively unknown, and the general public’s attitudes towards it are sceptical. The research findings purport that Bitcoin has potential demand especially when the financial system of a region is dysfunctional, or when there is a financial crisis. Bitcoin is not very trusted, and the majority of people do not see a reason to start using Bitcoin in the future. A large number of people associate it with illegal activities. In general people are largely unaware of what Bitcoin is or what are the strengths and weaknesses. Bitcoin is an innovative alternative currency. However, unless people see a major need for Bitcoin due to a financial crisis, or dysfunctionality in the financial system, Bitcoin will not become much more widespread as it is today. Bitcoin’s underlying technology can be harnessed to multiple uses. Developments in that field in the future are something that future researchers could look into.

Diffusion Monte Carlo study of electronic properties for H and Be atoms /

We examined three different algorithms used in diffusion Monte Carlo (DMC) to study their precisions and accuracies in predicting properties of isolated atoms, which are H atom ground state, Be atom ground state and H atom first excited state. All three algorithms — basic DMC, minimal stochastic reconfiguration DMC, and pure DMC, each with future-walking, are successfully impletmented in ground state energy and simple moments calculations with satisfactory results. Pure diffusion Monte Carlo with future-walking algorithm is proven to be the simplest approach with the least variance. Polarizabilities for Be atom ground state and H atom first excited state are not satisfactorily estimated in the infinitesimal differentiation approach. Likewise, an approach using the finite field approximation with an unperturbed wavefunction for the latter system also fails. However, accurate estimations for the a-polarizabilities are obtained by using wavefunctions that come from the time-independent perturbation theory. This suggests the flaw in our approach to polarizability estimation for these difficult cases rests with our having assumed the trial function is unaffected by infinitesimal perturbations in the Hamiltonian.

Exact property estimation from diffusion Monte Carlo with minimal stochastic reconfiguration /

Our objective is to develop a diffusion Monte Carlo (DMC) algorithm to estimate the exact expectation values, ($o|^|^o), of multiplicative operators, such as polarizabilities and high-order hyperpolarizabilities, for isolated atoms and molecules. The existing forward-walking pure diffusion Monte Carlo (FW-PDMC) algorithm which attempts this has a serious bias. On the other hand, the DMC algorithm with minimal stochastic reconfiguration provides unbiased estimates of the energies, but the expectation values ($o|^|^) are contaminated by ^, an user specified, approximate wave function, when A does not commute with the Hamiltonian. We modified the latter algorithm to obtain the exact expectation values for these operators, while at the same time eliminating the bias. To compare the efficiency of FW-PDMC and the modified DMC algorithms we calculated simple properties of the H atom, such as various functions of coordinates and polarizabilities. Using three non-exact wave functions, one of moderate quality and the others very crude, in each case the results are within statistical error of the exact values.

Rendu d'images en demi-tons par diffusion d'erreur sensible à la structure

Le présent mémoire comprend un survol des principales méthodes de rendu en demi-tons, de l’analog screening à la recherche binaire directe en passant par l’ordered dither, avec une attention particulière pour la diffusion d’erreur. Ces méthodes seront comparées dans la perspective moderne de la sensibilité à la structure. Une nouvelle méthode de rendu en demi-tons par diffusion d’erreur est présentée et soumise à diverses évaluations. La méthode proposée se veut originale, simple, autant à même de préserver le caractère structurel des images que la méthode à l’état de l’art, et plus rapide que cette dernière par deux à trois ordres de magnitude. D’abord, l’image est décomposée en fréquences locales caractéristiques. Puis, le comportement de base de la méthode proposée est donné. Ensuite, un ensemble minutieusement choisi de paramètres permet de modifier ce comportement de façon à épouser les différents caractères fréquentiels locaux. Finalement, une calibration détermine les bons paramètres à associer à chaque fréquence possible. Une fois l’algorithme assemblé, toute image peut être traitée très rapidement : chaque pixel est attaché à une fréquence propre, cette fréquence sert d’indice pour la table de calibration, les paramètres de diffusion appropriés sont récupérés, et la couleur de sortie déterminée pour le pixel contribue en espérance à souligner la structure dont il fait partie.

Action collective patronale : les mécanismes de diffusion entre les niveaux sectoriel et local

Cette recherche s'intéresse à l'acteur patronal organisé, encore peu étudié en Amérique du Nord. Pourtant, cet acteur est fortement organisé au Québec et il exerce une influence reconnue sur les politiques publiques et les relations industrielles. Cette recherche vise à mieux comprendre la logique d’action des employeurs et les lieux où ils exercent leur influence. Plus important encore, la recherche s’interroge sur les mécanismes de diffusion utilisés par les associations patronales pour transmettre à leurs membres des orientations et des lignes directrices à adopter. Tout comme pour l’acteur syndical qui doit développer sa capacité représentative (Dufour, Hege, Levesque et Murray, 2009), nous croyons qu’il en est de même pour l’acteur patronal. Bref, cette étude cherche à comprendre comment les associations patronales vont s'assurer que leurs membres adoptent des pratiques en lien avec les positions défendues dans les institutions du marché du travail et dans la sphère des politiques publiques. Notre question de recherche est la suivante : Quels sont les mécanismes développés par les associations patronales pour diffuser leurs orientations en matière de politiques publiques et de relations du travail en vue d’influencer les pratiques locales de gestion de leurs membres? Au plan théorique, cette étude mobilise les idées développées par les approches néo-institutionnalistes pour mieux expliquer comment les acteurs vont utiliser les institutions en place pour façonner les règles dans leurs intérêts, ce qui suppose d’abord une capacité de représentation et une cohérence dans les actions entre les niveaux où se situent l’acteur. On cherche à comprendre comment les associations peuvent coordonner les actions patronales en réaction aux changements qui s’opèrent dans l’environnement institutionnel. Les associations patronales sont des entrepreneurs institutionnels (Crouch, 2005) qui sont à la recherche active d’opportunités et de leviers de pouvoir à utiliser pour maximiser leurs intérêts de leurs membres et par la même occasion, réduire les incertitudes en provenance de l’environnement (Campbell, 2004; Streeck et Thelen, 2005; Crouch, 2005). Toujours au niveau théorique, cette étude se base sur les idées avancées par la sociologie des logiques d’action. Cette approche théorique nous permet de rendre compte des niveaux sectoriel et local où s’enracinent les comportements des employeurs. Au niveau sectoriel, il existe une pluralité d’instances qui contribuent à façonner les logiques d’actions des associations patronales. La sociologie des logiques d’actions nous permet d’envisager l’association patronale comme un groupe qui dispose d’une vie qui lui est propre avec une relative autonomie de fonctionnement. La capacité d’influence de l’association serait tributaire des mécanismes de coordination de l’action utilisés pour susciter l’accord au sein du groupe. Les mécanismes de coordination de l’action devraient permettre une connexion régulière et stable entre l’association et ses membres. Cette recherche s’intéresse aux associations patronales qui ont recours à un ensemble de moyens pour diffuser les orientations privilégiées aux entreprises membres. Au plan empirique, cette recherche propose de répondre aux trois objectifs suivants : (1) mieux comprendre les formes d’organisation patronales dans les mines au Québec; (2) mieux saisir la structure et la logique d’action des associations patronales sur les politiques publiques, les relations de travail et le marché du travail et finalement (3) mieux comprendre les mécanismes développés par les associations patronales pour diffuser leurs orientations en vue d’influencer les pratiques locales de gestion de leurs membres. Pour atteindre nos objectifs de recherche, nous avons utilisé une méthodologie qualitative de recherche soit une étude de cas du secteur des mines au Québec. Cette dernière a été conduite en trois étapes : la préparation, la collecte des données et l’interprétation (Merriam, 1998). Les données de cette étude ont été recueillies à l’hiver 2012, par le biais d’entretiens semi-directifs auprès de gestionnaires d’entreprises minières et de dirigeants d’associations minières. Une analyse qualitative du contenu de ces entrevues a été effectuée en lien avec la revue de littérature et nos propositions de recherche. À cette fin, nous avons utilisé la technique de l’appariement logique de Yin (1994), ce qui nous a permis de comparer nos observations à nos propositions de recherche. Au niveau des résultats, nous avons pu constater que les associations patronales du secteur des mines au Québec, endossent davantage le rôle de porte-parole de l’industrie auprès du gouvernement que celui de développeur de services aux membres. Les actions des associations patronales s’exercent à tous les niveaux décisionnels afin d’assurer la meilleure promotion possible des intérêts des employeurs. La représentation politique représente le champ d’activité le plus important qui compose la logique d’action des associations patronales de la filière minérale québécoise. Mentionnons également que la représentation des intérêts des entreprises auprès du public et des médias est également vitale à l’action collective patronale dans un souci d’acceptabilité sociale. Les associations d’employeurs vont tenter principalement d’influencer les pratiques en relations industrielles qui permettent d’assurer une meilleure image de l’industrie et qui sont jugées prioritaires en fonction du contexte institutionnel en place. La recherche nous a permis d’observer un impact favorable et significatif à la capacité de diffusion pour cinq des sept mécanismes de diffusion faisant partie de notre modèle d’analyse. Trois de ces cinq mécanismes favorisent la capacité de diffusion descendante (transposition de la logique d’action sectorielle sur les pratiques locales des membres) et les deux autres favorisent plutôt la capacité de diffusion ascendante (transposition des enjeux locaux jugés prioritaires sur la logique d’action sectorielle). Les mécanismes qui supportent au mieux la cohésion au sein de l’association sont ceux qui impliquent une relation dynamique entre les représentants et les membres et entre les membres eux-mêmes d’où la pertinence d’une diffusion descendante et ascendante des orientations. Il est à noter qu’étant donné que cette recherche consiste en une étude de cas, des limites méthodologiques liées à la généralisation des résultats sont présentes. Il n’est pas aisé d’affirmer que les résultats de cette microanalyse soient généralisables en raison des spécificités du secteur à l’étude. En contrepartie, les analyses ont servi à l’élaboration d’un modèle qui pourra être utilisé dans des études futures.

Application of laser beam deflection technique to study the diffusion process in electrolyte solutions

A simple method based on laser beam deflection to study the variation of diffusion coefficient with concentration in a solution is presented. When a properly fanned out laser beam is passed through a rectangular cell filled with solution having concentration gradient, the emergent beam traces out a curved pattern on a screen. By taking measurements on the pattern at different concentrations, the variation of diffusion coefficient with concentration can be determined.

Studies on Heat Diffusion in Selected Conducting Polymers using Probe Beam Deflection and Photoacoustic Techniques

In the present study, radio frequency plasma polymerization technique is used to prepare thin films of polyaniline, polypyrrole, poly N-methyl pyrrole and polythiophene. The thermal characterization of these films is carried out using transverse probe beam deflection method. Electrical conductivity and band gaps are also determined. The effect of iodine doping on electrical conductivity and the rate of heat diffusion is explored.Bulk samples of poyaniline and polypyrrole in powder form are synthesized by chemical route. Open photoacoustic cell configuration is employed for the thermal characterization of these samples. The effect of acid doping on heat diffusion in these bulk samples of polyaniline is also investigated. The variation of electrical conductivity of doped polyaniline and polypyrrole with temperature is also studied for drawing conclusion on the nature of conduction in these samples. In order to improve the processability of polyaniline and polypyrrole, these polymers are incorporated into a host matrix of poly vinyl chloride. Measurements of thermal diffusivity and electrical conductivity of these samples are carried out to investigate the variation of these quantities as a function of the content of polyvinyl chloride.

Analytical Studies on Diffusion and lntermittency in Chaotic Maps

The study of simple chaotic maps for non-equilibrium processes in statistical physics has been one of the central themes in the theory of chaotic dynamical systems. Recently, many works have been carried out on deterministic diffusion in spatially extended one-dimensional maps This can be related to real physical systems such as Josephson junctions in the presence of microwave radiation and parametrically driven oscillators. Transport due to chaos is an important problem in Hamiltonian dynamics also. A recent approach is to evaluate the exact diffusion coefficient in terms of the periodic orbits of the system in the form of cycle expansions. But the fact is that the chaotic motion in such spatially extended maps has two complementary aspects- - diffusion and interrnittency. These are related to the time evolution of the probability density function which is approximately Gaussian by central limit theorem. It is noticed that the characteristic function method introduced by Fujisaka and his co-workers is a very powerful tool for analysing both these aspects of chaotic motion. The theory based on characteristic function actually provides a thermodynamic formalism for chaotic systems It can be applied to other types of chaos-induced diffusion also, such as the one arising in statistics of trajectory separation. It was noted that there is a close connection between cycle expansion technique and characteristic function method. It was found that this connection can be exploited to enhance the applicability of the cycle expansion technique. In this way, we found that cycle expansion can be used to analyse the probability density function in chaotic maps. In our research studies we have successfully applied the characteristic function method and cycle expansion technique for analysing some chaotic maps. We introduced in this connection, two classes of chaotic maps with variable shape by generalizing two types of maps well known in literature.