Composition of sediments samples spanning the Cretaceous-Tertiary boundary at ODP Site 207-1259

Ocean Drilling Program (ODP) Leg 207, on the Demerara Rise in the western tropical North Atlantic, recovered multiple Cretaceous-Paleogene boundary sections containing an ejecta layer. Sedimentological, geochemical, and paleontological changes across the boundary closely match patterns expected for a mass extinction caused by a single impact. A normally graded, ~2-cm-thick bed of spherules that is interpreted as a primary air-fall deposit of impact ejecta occurs between sediments of the highest Cretaceous Plummerita hantkeninoides foraminiferal zone and the lowest Paleogene P0 foraminiferal zone. There are no other spherule layers in the section. In addition to extinction of Cretaceous taxa, foraminiferal abundance drops from abundant to rare across the boundary. Ir concentrations reach a maximum of ~1.5 ppb at the top of the spherule bed, and the Ir anomaly is associated with enrichment in other siderophile elements. We attribute the unusually well-preserved and relatively simple stratigraphy to the fact that Demerara Rise was close enough (~4500 km) to the Chicxulub impact site to receive ~2 cm of ejecta, yet was far enough away (and perhaps sheltered by the curve of northern South America) to have been relatively unaffected by impact-induced waves.

Internal deformation and kinematic indicators within a tripartite Mass Transport Deposit, NW Argentina

Acknowledgments This work was carried out with support from CNPq (Conselho Nacional de Desenvolvimento Científico e Tecnológico) – Brazil, BG-Brazil and the University of Aberdeen. We would like to thank the following geologists for their support, camaraderie and countless hours of fieldwork: Claus Fallgatter, Victoria Valdez, Carla Puigdomenech, Guilherme Bozetti, Roberto Noll Filho and Arthur Giovannini, and we thank Lorena Moscardelli and an anonymous reviewer, whose constructive comments helped to improve the manuscript.

(Table 2, page 1177) Composition of manganese deposit samples from Cuba

Todorokite is a very abundant manganese oxide mineral in many deposits in Cuba and has been noted from other localities. Six new analyses are givenl they lead to the approximate formula (Na, Ca, K, Mn+2)(Mn+4, Mn+2, Mg)6O12.3H2O. Electron diffraction data show the mineral to be orthorhombic, or monoclinic with beta near 90°. The x-ray powder pattern is indexed on a cell with a=0.75A, b=2.849A, c=9.59A, beta=90°. A differential thermal analysis curve is given.

Chemical composition of nodules from two locations in the Pacific Ocean using different methods

Manganese nodules recovered in the Pacific Ocean by the U. S. Bureau of Mines and by DeepSea Ventures Ltd. are studied for their chemical composition using X microprobe and X-ray fluorescence methods.

(Page 290) Composition of a manganese deposit sample from the Todoroki Mine, Japan

The Todoroki Mine is situated about 25 kilometers to the south-east of Ginzan railway station in Siribesi Province, Hokkaido. The author analysed an interesting specimen of black manganese-ore which had a fractured surface which looked like that of a broken piece of wood. This new manganese mineral was studied in its form, physical properties and chemical composition. The author later named this mineral form as "todorokite".

Elemental composition of various manganese nodules

Manganese nodules have been observed over wide areas of both the Pacific and Atlantic Oceans, however, deposits in the Pacific Ocean are generally much richer in elements of economic interest such as nickel, copper and cobalt. In understanding the genesis and the geochemistry involved in their formation and growth, it is important to know the total chemical composition of these nodules and how they vary within a given deposit and between deposits in the oceans of the world. The concentrations of elements: nickel, copper, cobalt, iron, manganese, silicon, and calcium, in all of the manganese nodules which have been analyzed were recently summarized by Horn et al. (1972). These observations indicate certain correlations, both positive and negative, between Mn and the associated elements within the nodules. Their data suggest similarities in chemical composition for nodules from a given area; however, the analyses of Mn nodules, like that of the ocean water, itself, has large errors associated with some of the measurements. This is understandable, since many of these measurements were intended to provide an approximate indication of elemental content. Where one is interested in carefully preparing a description of Mn nodule chemical composition which can serve as a basis for formulating theories regarding their genesis and subsequent geochemical changes in the ocean environment, then very precise and accurate analyses are essential. The purpose of this study has been to measure the concentrations of 18 elements in Mn nodules with a high degree of accuracy and determine what correlations exist between element concentrations. The scope of this study was seriously limited and therefore was confined to one area of the Pacific Ocean at approximately 22 N latitude, 114 W longitude, at an ocean depth of approximately 11,000 feet.

Dendrogeochemical Study of a Copper Deposit in Black Springs, Australia

The Bushranger Copper project is a known porphyry-style copper deposit located roughly 150 km west of Sydney in New South Wales, Australia. Monterey pines (Pinus radiata) growing over the mineralization were cored and their rings were counted. Segments of the core representing growth between 2003 and 2008 were selected, digested in nitric acid, and analyzed via ICP-MS. This time span was selected because there was the least variation in tree ring width among all samples during these years, indicating uniform growth. The relative concentrations of the pathfinder elements Al, Cu, Mo, Pb and Zn were highest in the south-western corner of the area. Based on the data this area is the most prospective area to conduct further exploration efforts.

Understanding arsenic mobility and speciation in lake sediments impacted by ore roasting near Giant mine, NWT

The roasting of gold-bearing arsenopyrite at Giant mine (Northwest Territories) between 1949 and 1999 released approximately 20,000 tonnes of toxic arsenic-bearing aerosols in the local aerial environment. Detailed examination of lake sediments, sediment porewaters, surface waters and lake hydrology sampled from three lakes of differing limnological characteristics was conducted in summer and winter conditions. Samples were analyzed for solid and dissolved elemental concentrations, speciation and mineralogy. The three lakes are located less than 5km from the mine roaster, and downwind, based on predominant wind direction. The objective of the study was to assess the controls on the mobility and fate of arsenic in these roaster-impacted subarctic lacustrine environments. Results show that the occurrence of arsenic trioxide in lake sediments coincides with the regional onset of industrial activities. The bulk of arsenic in sediments is contained in the form of secondary sulphide precipitates, with iron oxides hosting a minimal amount of arsenic near the surface-water interface. The presence of geogenic arsenic is likely contained as dilute impurities in common rock-forming minerals, and is not believed to be a significant source of arsenic to sediments, porewaters or lake waters. Furthermore, the well correlated depth-profiles of arsenic, antimony and gold in sediments may help reveal roaster impact. The soluble arsenic trioxide particles contained in sediments act as the primary source of arsenic into porewaters. Dissolved arsenic in reducing porewaters both precipitate as secondary sulphides in situ, and diffuse upwards into the overlying lake waters. Arsenic diffusion out of porewaters, combined with watercourse-driven residence time, are estimated to be the predominant mechanisms controlling arsenic concentrations in overlying lake waters. The sequestration of arsenic from porewaters as sulphide precipitates, in the study lakes, is not an effective process in keeping lake-water arsenic concentrations below guidelines for the protection of the freshwater environment and drinking water. Seasonal impacts on lake geochemistry derive from ice covering lake waters, cutting them off from of atmospheric oxygen, along with the exclusion of solutes from the ice. Such effects are limited in deep lakes but are can be an important factor controlling arsenic precipitation and mobility in ponds.

The Evolution of the Los Negritos Porphyry Copper Deposit, Coquimbo, Chile: Geological, Geochronological, Mineralogical and Geochemical Evidence

The Los Negritos porphyry copper deposit is located ~ 4 km to the northeast of Carmen de Andacollo Mine in the Chilean Cretaceous metallogenic belt. The mineralization is hosted in andesite of the Quebrada Marquesa Formation and a series of at least four early to intramineral porphyry intrusive rock types: plagioclase quartz biotite porphyry (P1b and P1a dated at 109.60± 0.75 Ma and 107.22± 0.40 Ma); plagioclase biotite porphyry (P2: 106.30 ± 0.47 Ma); and quartz plagioclase biotite porphyry (P3: 106.19 ± 0.42 Ma). These units are cut by late‐ to post‐mineral plagioclase‐hornblende porphyritic rocks (P4b: 106.20 ± 0.69 Ma and P4a: 106.50 ± 0.68 Ma). The earliest intrusive units (P1) were affected by an initial stage of K‐feldspar‐biotite alteration, with chalcopyrite, molybdenite (date at 108.5 ± 0.5 Ma) and gold (up to 0.11 ppm), and the surrounding volcanic host rock was overprinted by chlorite‐epidote dominated (propylitic) alteration. Subsequent to the P2 and P3 intrusion, these rocks were affected by albite and then a second stage of potassic alteration. The Ti and Ba contents in hydrothermal biotite are notably lower (typically Ti = 0.100‐0.144 a.p.f.u. and Ba = 0.001‐0.005 a.p.f.u) than in magmatic ones (generally Ti = 0.186‐0.222 a.p.f.u. and Ba = 0.014‐0.023 a.p.f.u.), and constitute an excellent discriminant of the nature of biotite. These early stages of alteration were overprinted by copper‐molybdenum bearing chlorite‐sericite alteration at 106.60 ± 0.5 Ma (Re‐Os age in molybdenite) and by quartz‐sericite‐pyrite veins (phyllic), respectively in the southwest and northeast areas. The average temperature associated with these two alteration facies is estimated around 305 °C. Weak albite‐calcite alteration, spatially associated with sulfosalts and distributed along the margins of P3, overprinted the phyllic facies. The intrusive rock units at the Los Negritos and Carmen de Andacollo deposits are geochemically classified as diorite to granodiorite with a calc‐alkaline magmatic affinity, and formed in a volcanic arc setting from partial melting of a metasomatized mantle wedge. They are interpreted to be cogenetic, and related to a common long‐lived magma chamber that emplaced during a period of tectonic inversion known as the Subhercynian, Peruvian or Pacific event.

Alteration mineralogy and pathfinder element inventory of the McArthur River unconformity-related uranium deposit, Canada

The chemical compositions, modal mineralogy, and textural variability of interstitial minerals in sandstones of the Athabasca Group strata in the vicinity of the McArthur River unconformity-related uranium deposit were characterized using a combination of short wave infrared spectroscopy (SWIR), lithogeochemistry, scanning electron microscopy (SEM), electron probe microanalysis (EPMA) and laser ablation mass spectrometry (LA-ICP-MS) to determine the residence sites of pathfinder trace elements. The importance of integrating in-situ mineral chemistry with whole-rock analyses resides in the possibility to establish the mineralogical and paragenetic context of geochemical signatures in defining the footprint of the deposit. Located in the Athabasca Basin, Saskatchewan, Canada, the deposit is situated below ~550 m of quartz arenitic sandstones that are strongly silicified between depths of approximately 200-400 m. The silicified layer exhibits significant control on the distribution of alteration minerals, and appears to have restricted both the primary and secondary dispersion of pathfinder trace elements, which include U, radiogenic Pb isotopes, V, Ni, Co, Cu, Mo, As, Zn, and REEs. Diagenetic background sandstones contain assemblages of illite, dickite, aluminum-phosphate-sulfate (APS) minerals, apatite, and Fe-Ti oxide minerals. Altered sandstones contain assemblages of Al-Mg chlorite (sudoite), alkali-deficient dravite, APS minerals, kaolinite, illite, and oxide minerals. Throughout the sandstones, APS minerals account for the majority of the Sr and LREE concentrations, whereas late pre-ore chlorite, containing up to 0.1 wt.% Ni, accounts for the majority of Ni concentrations. Cobalt, Cu, Mo, and Zn occur predominantly in cryptic sub-micron sulfide and sulfarsenide inclusions in clay mineral aggregates and in association with paragenetically-late Fe-Ti oxides. Uranium occurs predominantly in cryptic micro-inclusions associated with pyrite in late-stage quartz overgrowths, and with paragenetically late Fe-Ti oxide micro-inclusions in kaolinite. Additionally, up to 0.2 wt.% U is cryptically distributed in post-ore Fe-oxide veins. Early diagenetic apatite, monazite and apatite inclusions in detrital quartz, and detrital zircon also contribute significant U and HREE to samples analyzed with an aggressive leach such as Aqua Regia. Detailed LA-ICP-MS chemical mapping of interstitial assemblages, detrital grains, and cements provides new insights into the distribution and inventory of pathfinder elements in the footprint of the McArthur River uranium deposit.

Combining histology, stable isotope analysis and ZooMS collagen fingerprinting to investigate the taphonomic history and dietary behaviour of extinct giant tortoises from the Mare aux Songes deposit on Mauritius

Taphonomic research of bones can provide additional insight into a site's formation and development, the burial environment and ongoing post-mortem processes. A total of 30 tortoise (Cylindraspis) femur bone samples from the Mare aux Songes site (Mauritius)were studied histologically, assessing parameters such as presence and type of microbial alteration, inclusions, staining/infiltrations, the degree of microcracking and birefringence. The absence of microbial attack in the 4200 year old Mare aux Songes bones suggests the animals rapidly entered the soil whole-bodied and were sealed anoxically, although they suffered frombiological and chemical degradation (i.e. pyrite formation/oxidation, mineral dissolution and staining) related to changes in the site's hydrology. Additionally, carbon and nitrogen stable isotopeswere analysed to obtain information on the animals' feeding behaviour. The results show narrowly distributed δ13C ratios, indicating a terrestrial C3 plant-based diet, combined with a wide range in δ15N ratios. This is most likely related to the tortoises' drought-adaptive ability to change their metabolic processes, which can affect the δ15N ratios. Furthermore, ZooMS collagen fingerprinting analysis successfully identified two tortoise species (C. triserrata and C. inepta) in the bone assemblage,which,when combined with stable isotope data, revealed significantly different δ15N ratios between the two tortoise species. As climatic changes around this period resulted in increased aridity in the Mascarene Islands, this could explain the extremely elevated δ15N ratio in our dataset. The endemic fauna was able to endure the climatic changes 4200 years ago, although human arrival in the 17th century changed the original habitat to such an extent that it resulted in the extinction of several species. Fortunately we are still able to study these extinct tortoises due to the beneficial conditions of their burial environment, resulting in excellent bone preservation.

High plasticity of loggerhead nesting site fidelity: from using repeatedly the same small beach during different seasons to deposit consecutive nests in different islands distant more than 100 km

[EN] Sea turtles exhibit a strong natal homing associated with a high nesting site philopatry. Mark-recapture and genetic studies confirm these patterns suggesting differences among and within species. In the present study, we have analysed the degree of nest site fidelity of a loggerhead population nesting on the islands of Cape Verde and have evaluated the existence of intrapopulational variability in this trait. The loggerhead is the only sea turtle species that nests in Cape Verde, and 15,000–25,000 nests per season have been estimated for the whole archipelago.

Characterisation of a pleistocene debris-avalanche deposit in the Tenteniguada Basin, Gran Canaria Island, Spain

[EN] We studied a large debris-avalanche deposit of Pleistocene age in the Tenteniguada Basin, Gran Canaria Island, Spain. This deposit, which is well preserved because it is mostly covered by basanite lava flows, has distinctive matrix and block facies, hummocky topography and internal structures typical of debris avalanches. However, neither syneruptive lavas nor some characteristic features of volcanic debris-avalanche deposits, such as a stratovolcano edifice or a horseshoe-shaped crater, are present. The occurrence of internal features characteristic of volcanic avalanche deposits could be attributed to the volcanic materials involved in the movement rather than to the triggering of the avalanche during a volcanic eruption.

Antimony-based type-II superlattice infrared detectors

Numerous applications within the mid- and long-wavelength infrared are driving the search for efficient and cost effective detection technologies in this regime. Theoretical calculations have predicted high performance for InAs/GaSb type-II superlattice structures, which rely on mature growth of III-V semiconductors and offer many levels of freedom in design due to band structure engineering. This work focuses on the fabrication and characterization of type-II superlattice infrared detectors. Standard UV-based photolithography was used combined with chemical wet or dry etching techniques in order to fabricate antinomy-based type-II superlattice infrared detectors. Subsequently, Fourier transform infrared spectroscopy and radiometric techniques were applied for optical characterization in order to obtain a detector's spectrum and response, as well as the overall detectivity in combination with electrical characterization. Temperature dependent electrical characterization was used to extract information about the limiting dark current processes. This work resulted in the first demonstration of an InAs/GaSb type-II superlattice infrared photodetector grown by metalorganic chemical vapor deposition. A peak detectivity of 1.6x10^9 Jones at 78 K was achieved for this device with a 11 micrometer zero cutoff wavelength. Furthermore the interband tunneling detector designed for the mid-wavelength infrared regime was studied. Similar results to those previously published were obtained.