Statistical Innovations Improve Prevalence Estimates of Nutrient Risk Populations: Applications in Sao Paulo, Brazil

The objective of this study was to estimate the prevalence of inadequate micronutrient intake and excess sodium intake among adults age 19 years and older in the city of Sao Paulo, Brazil. Twenty-four hour dietary recall and sociodemographic data were collected from each participant (n=1,663) in a cross-sectional study, Inquiry of Health of Sao Paulo, of a representative sample of the adult population of the city of Sao Paulo in 2003 (ISA-2003). The variability in intake was measured through two replications of the 24-hour recall in a subsample of this population in 2007 (ISA-2007). Usual intake was estimated by the PC-SIDE program (version 1.0, 2003, Department of Statistics, Iowa State University), which uses an approach developed by Iowa State University. The prevalence of nutrient inadequacy was calculated using the Estimated Average Requirement cut-point method for vitamins A and C, thiamin, riboflavin, niacin, copper, phosphorus, and selenium. For vitamin D, pantothenic acid, manganese, and sodium, the proportion of individuals with usual intake equal to or more than the Adequate Intake value was calculated. The percentage of individuals with intake equal to more than the Tolerable Upper Intake Level was calculated for sodium. The highest prevalence of inadequacy for males and females, respectively, occurred for vitamin A (67% and 58%), vitamin C (52% and 62%), thiamin (41% and 50%), and riboflavin (29% and 19%). The adjustment for the within-person variation presented lower prevalence of inadequacy due to removal of within-person variability. All adult residents of Sao Paulo had excess sodium intake, and the rates of nutrient inadequacy were high for certain key micronutrients. J Acad Nutr Diet. 2012;112:1614-1618.

Towards a hybrid approach for adapting web graphical user interfaces to heterogeneous devices using context

Ubiquitous Computing promises seamless access to a wide range of applications and Internet based services from anywhere, at anytime, and using any device. In this scenario, new challenges for the practice of software development arise: Applications and services must keep a coherent behavior, a proper appearance, and must adapt to a plenty of contextual usage requirements and hardware aspects. Especially, due to its interactive nature, the interface content of Web applications must adapt to a large diversity of devices and contexts. In order to overcome such obstacles, this work introduces an innovative methodology for content adaptation of Web 2.0 interfaces. The basis of our work is to combine static adaption - the implementation of static Web interfaces; and dynamic adaptation - the alteration, during execution time, of static interfaces so as for adapting to different contexts of use. In hybrid fashion, our methodology benefits from the advantages of both adaptation strategies - static and dynamic. In this line, we designed and implemented UbiCon, a framework over which we tested our concepts through a case study and through a development experiment. Our results show that the hybrid methodology over UbiCon leads to broader and more accessible interfaces, and to faster and less costly software development. We believe that the UbiCon hybrid methodology can foster more efficient and accurate interface engineering in the industry and in the academy.

Comparative study of bone repair in mandibular body osteotomy between metallic and absorbable 2.0 mm internal fixation systems. Histological and histometric analysis in dogs: a pilot study

The objective of this study was to compare the bone repair along a mandibular body osteotomy stabilized with 2.0 mm absorbable and metallic systems. 12 male, adult mongrel dogs were divided into two groups (metallic and absorbable) and subjected to unilateral osteotomy between the mandibular third and fourth premolars, which was stabilized by applying two 4-hole plates. At 2 and 18 weeks, three dogs from each group were killed and the osteotomy sites were removed and divided equally into three parts: the upper part was labelled the tension third (TT), the lower part the compression third (CT), and the part between the TT and CT the intermediary third (IT). Regardless of the treatment system, union between the fragments was observed at 18 weeks and the CT showed more advanced stages of bone repair than the TT. Histometric analysis did not reveal any significant differences among the 3 parts or systems in the distance between bone fragments at 2 weeks. Although at 18 weeks the proportions of newly formed bone did not differ among TT, IT and CT, significantly enhanced bone formation was observed in all sections for the metallic group. The patterns of repair were distinct between treatments.

(KsKs0)-K-0 correlations in pp collisions at root s=7 TeV from the LHC ALICE experiment

Identical neutral kaon pair correlations are measured in root s = 7 TeV pp collisions in the ALICE experiment. One-dimensional (KsKs0)-K-0 correlation functions in terms of the invariant momentum difference of kaon pairs are formed in two multiplicity and two transverse momentum ranges. The femtoscopic parameters for the radius and correlation strength of the kaon source are extracted. The fit includes quantum statistics and final-state interactions of the a(0)/f(0) resonance. (KsKs0)-K-0 correlations show an increase in radius for increasing multiplicity and a slight decrease in radius for increasing transverse mass, mT, as seen in pi pi correlations in pp collisions and in heavy-ion collisions. Transverse mass scaling is observed between the (KsKs0)-K-0 and pi pi radii. Also, the first observation is made of the decay of the f(2)'(1525) meson into the (KsKs0)-K-0 channel in pp collisions. (C) 2012 CERN. Published by Elsevier B.V. All rights reserved.

Bestimmung des elektrischen Formfaktors des Neutrons G en in der Reaktion 3 He (e,e'n) bei einem Impulsübertrag Q 2 =0.67 (GeV/c) 2

In der Überprüfung von Kernmodellen stellt der elektrische Formfaktor des Neutrons Gen eine wichtige Eingangsgröße dar. Im Rahmen dieser Arbeit wurde am polarisierten Elektronenstrahl des Mainzer Mikrotrons MAMI der elektrische Formfaktor des Neutrons in der Reaktion 3He(e,e'n) bestimmt. Aus dem Verhältnis der Asymmetrien respektive der Helizitätsumkehr der Elektronenpolarisation mit Targetspin senkrecht und parallel zum Impulsübertrag konnte in einer integralen Analyse Gen bestimmt werden. Zusammengefasst ergab sich Gen(Q2=0.67 (GeV/c)2) = 0.0468 +- 0.0064(stat} +- 0.0027(syst}. Um den Einfluß von Kernbindungseffekten, die z. Zt. von der Gruppe um Prof. Glöckle in Bochum theoretisch gerechnet werden, auch experimentell abzusichern, wurden parallel zur Gen-Messung die Targetasymmetrie Ay0 3He(e,e'n) und Protonenasymmetrie 3He(e,e'p) bestimmt. Die Empfindlichkeit dieser Observablen auf FSI und D-Wellenbeiträge schafft Redundanzen, aus denen auf die Eigenschaften des freien Neutrons im gebundenen System geschlossen werden kann.

Engineering Concurrent and Event-driven Web Apps: An Agent-Oriented Approach based on the simpAL Language

Web is constantly evolving, thanks to the 2.0 transition, HTML5 new features and the coming of cloud-computing, the gap between Web and traditional desktop applications is tailing off. Web-apps are more and more widespread and bring several benefits compared to traditional ones. On the other hand reference technologies, JavaScript primarly, are not keeping pace, so a paradim shift is taking place in Web programming, and so many new languages and technologies are coming out. First objective of this thesis is to survey the reference and state-of-art technologies for client-side Web programming focusing in particular on what concerns concurrency and asynchronous programming. Taking into account the problems that affect existing technologies, we finally design simpAL-web, an innovative approach to tackle Web-apps development, based on the Agent-oriented programming abstraction and the simpAL language. == Versione in italiano: Il Web è in continua evoluzione, grazie alla transizione verso il 2.0, alle nuove funzionalità introdotte con HTML5 ed all’avvento del cloud-computing, il divario tra le applicazioni Web e quelle desktop tradizionali va assottigliandosi. Le Web-apps sono sempre più diffuse e presentano diversi vantaggi rispetto a quelle tradizionali. D’altra parte le tecnologie di riferimento, JavaScript in primis, non stanno tenendo il passo, motivo per cui la programmazione Web sta andando incontro ad un cambio di paradigma e nuovi linguaggi e tecnologie stanno spuntando sempre più numerosi. Primo obiettivo di questa tesi è di passare al vaglio le tecnologie di riferimento ed allo stato dell’arte per quel che riguarda la programmmazione Web client-side, porgendo particolare attenzione agli aspetti inerenti la concorrenza e la programmazione asincrona. Considerando i principali problemi di cui soffrono le attuali tecnologie passeremo infine alla progettazione di simpAL-web, un approccio innovativo con cui affrontare lo sviluppo di Web-apps basato sulla programmazione orientata agli Agenti e sul linguaggio simpAL.

Thin nanostructured crystalline TiO 2 films and their applications in solar cells

Research on thin nanostructured crystalline TiO2 films has attracted considerable interests because of their intriguing physical properties and potential applications in photovoltaics. Nanostructured TiO2 film plays an important role in the TiO2 based dye-sensitized solar cells because they act as a substrate for the adsorption of dye molecules and a matrix for the transportation of electrons as well. Thus they can influence the solar cell performance significantly. Consequently, the control of the morphology including the shape, size and size distribution of the TiO2 nanostructures is critical to tune and optimize the performance of the solar cells. To control the TiO2 morphology, a strategy using amphiphilic block copolymer as templating agent coupled with sol-gel chemistry has been applied. Especially, a good-poor solvent pair induced phase separation process has been developed to guide the microphase separation behavior of the block copolymers. The amphiphilic block copolymers used include polystyrene-block-poly (ethylene oxide) (PS-b-PEO), poly (methyl methacrylate)-block-poly (ethylene oxide) (PMMA-b-PEO), and poly (ethylene oxide)-block-polystyrene-block-poly (ethylene oxide) (PEO-b-PS-b-PEO). The block copolymer undergoes a good-poor-solvent pair induced phase separation in a mixed solution of 1, 4-dioxane or N, N’-dimethyl formamide (DMF), concentrated hydrochloric acid (HCl) and Titanium tetraisopropoxide (TTIP). Specifically, in the system of PS-b-PEO, a morphology phase diagram of the inorganic-copolymer composite films was mapped by adjusting the weight fractions among 1, 4-dioxane, HCl, and TTIP in solution. The amorphous TiO2 within the titania-block copolymer composite films was crystallized by calcination at temperatures above 400C, where the organic block copolymer was simultaneously burned away. This strategy is further extended to other amphiphilic block copolymers of PMMA-b-PEO and PEO-b-PS-b-PEO, where the morphology of TiO2 films can also be controlled. The local and long range structures of the titania films were investigated by the combination of imaging techniques (AFM, SEM) and x-ray scattering techniques (x-ray reflectivity and grazing incidence small-angle x-ray scattering). Based on the knowledge of the morphology control, the crystalline TiO2 nanostructured films with different morphologies were introduced into solid state dye-sensitized solar cells. It has been found that all of the morphologies help to improve the performance of the solar cells. Especially, clustered nanoparticles, worm-like structures, foam-like structures, large collapsed nanovesicles show more pronounced performance improvement than other morphologies such as nanowires, flakes, and nanogranulars.

Bildung in Medienwelten?: Eine biografieanalytische Studie zu Lern- und Bildungsprozessen bei Homosexuellen im Internet

Innerhalb der vorliegenden Untersuchung geht es um die Verknüpfung von Medienbildung, homosexueller Sozialität und der Methodik der Biografieanalyse. Ausgangsbasis ist eine sozialkonstruktivistische Sichtweise auf Geschlecht und (Homo-) Sexualität, wobei eine sozio-historische Kontextualisierung von Homosexualität unter Berücksichtigung von Diskriminierung erfolgt. Im Fokus steht der Coming-out-Prozess, der zwischen Zeigen und Verstecken changiert und mittels des Mediums Internet einen Raum findet, indem neue Bestimmungen homosexueller Identitäten und Formen homosexueller Sozialität möglich werden. Kommunikative Aspekte des Internets werden ausführlich expliziert und durch die strukturelle Medienbildungstheorie nach Marotzki (2009) ergänzt, um mögliche verbundene Bildungsprozesse zu beschreiben. Innerhalb dieser Theorie werden vier kritische Reflexionshorizonte (Wissensbezug, Handlungsbezug, Grenzbezug, Biografiebezug) entfaltet und auf die Artikulations- und Präsentationsmöglichkeiten des Internets bezogen. Deutlich wird, dass das Internet Spielräume für Identitäten bietet, denen Potenziale für reale Identitätskonstruktionen inneliegen. Fassbar werden diese Potenziale durch das medienpädagogische Konstrukt der Medienbiografie, sowie Konzepte der erziehungswissenschaftlichen Biografieforschung (Konstrukt Bildung nach Marotzki, 1990a; Konstrukt Sexualbiografie nach Scheuermann, 1999; 1995). Empirisch orientiert sich die Studie an Methodologie und Methodik der Biografieforschung, Grounded Theory (Glaser/Strauss, 1967) und dem narrationsstrukturellen Verfahren nach Schütze (1984, 1983). Konkret wird auf folgende Forschungsfragen referiert: Wie gestalten sich Lern- und Bildungsprozesse für männliche Homosexuelle in digitalen Medienwelten? Welche Möglichkeiten und Gestaltungschancen gibt es für die Repräsentation des (sexuellen) Selbst im Medium Internet? Welche Auswirkungen haben diese virtuellen Prozesse auf die real gelebte Biografie und das Selbst- und Weltverhältnis der einzelnen Homosexuellen? Durch Rekonstruktion von vier Fallbeispielen werden Möglichkeiten des Internets für die Repräsentation und Identitätsgestaltung von männlichen Homosexuellen präsentiert, bei denen die Gestaltbarkeit von Konstruktionen sexueller Identität und die Problematik der Subjekt-Umwelt-Relation deutlich werden. Im weiteren erfolgt ein kontrastierender Vergleich der Einzelfälle (Dimensionen: Familie, Peer Group, sexualbiografische Entwicklung, Medienbildungsprozesse, biografische Fallstruktur), die einer anschließenden Konstruktion von vier idealtypischen Prozessvarianten der sexualbiografischen Identitätsentwicklung zugeführt werden. Vier verschiedene Möglichkeiten des Internets als Präsentationstraum der eigenen Sexualität und Konstruktionen homosexueller Identität lassen sich somit skizzieren (Virtualitätslagerung, Zweckorientierung, reflexive Balancierung, periodische Selbstaktualisierung). Tentative Bildungs- und Identitätsprozesse sind also in der Virtualität des Internets möglich und können rekursiv-zirkulär auf reale Identitätsentwicklungen und reale Zugänge zu spezifischen sozialen Gruppen einwirken.

Mean curvature flow in SE (2) and applications to visual perception

Our goal in this thesis is to provide a result of existence of the degenerate non-linear, non-divergence PDE which describes the mean curvature flow in the Lie group SE(2) equipped with a sub-Riemannian metric. The research is motivated by problems of visual completion and models of the visual cortex.

Preparation of highly-ordered TiO₂ nanotube arrays and their applications in Dye-sensitized solar cells

Titanium oxide is an important semiconductor, which is widely applied for solar cells. In this research, titanium oxide nanotube arrays were synthesized by anodization of Ti foil in the electrolyte composed of ethylene glycol containing 2 vol % H2O and 0.3 wt % NH4F. The voltages of 40V-50V were employed for the anodizing process. Pore diameters and lengths of the TiO2 nanotubes were evaluated by field emission scanning electron microscope (FESEM). The obtained highly-ordered titanium nanotube arrays were exploited to fabricate photoelectrode for the Dye-sensitized solar cells (DSSCS). The TiO2 nanotubes based DSSCS exhibited an excellent performance with a high short circuit current and open circuit voltage as well as a good power conversion efficiency. Those can be attributed to the high surface area and one dimensional structure of TiO2 nanotubes, which could hold a large amount of dyes to absorb light and help electron percolation process to hinder the recombination during the electrons diffusion in the electrolyte.

Computer technology applications in surgical implant dentistry: a systematic review

PURPOSE: To assess the literature on accuracy and clinical performance of computer technology applications in surgical implant dentistry. MATERIALS AND METHODS: Electronic and manual literature searches were conducted to collect information about (1) the accuracy and (2) clinical performance of computer-assisted implant systems. Meta-regression analysis was performed for summarizing the accuracy studies. Failure/complication rates were analyzed using random-effects Poisson regression models to obtain summary estimates of 12-month proportions. RESULTS: Twenty-nine different image guidance systems were included. From 2,827 articles, 13 clinical and 19 accuracy studies were included in this systematic review. The meta-analysis of the accuracy (19 clinical and preclinical studies) revealed a total mean error of 0.74 mm (maximum of 4.5 mm) at the entry point in the bone and 0.85 mm at the apex (maximum of 7.1 mm). For the 5 included clinical studies (total of 506 implants) using computer-assisted implant dentistry, the mean failure rate was 3.36% (0% to 8.45%) after an observation period of at least 12 months. In 4.6% of the treated cases, intraoperative complications were reported; these included limited interocclusal distances to perform guided implant placement, limited primary implant stability, or need for additional grafting procedures. CONCLUSION: Differing levels and quantity of evidence were available for computer-assisted implant placement, revealing high implant survival rates after only 12 months of observation in different indications and a reasonable level of accuracy. However, future long-term clinical data are necessary to identify clinical indications and to justify additional radiation doses, effort, and costs associated with computer-assisted implant surgery.

Leveraging Informality Within eLearning

The next generation of learners expect more informality in learning. Formal learning systems such as traditional LMS systems no longer meet the needs of a generation of learners used to Twitter and Facebook, social networking and user-generated content. Regardless of this, however, formal content and learning models are still important and play a major role in educating learners, particularly in enterprise. The eLite project at DERI addressed this emerging dichotomy of learning styles, reconciling the traditional with the avant garde by using innovative technology to add informal learning capabilities to formal learning architectures.

“Advertising Psychology – The Blog Seminar”.

The aim of the web-based course “Advertising Psychology – The Blog Seminar” was to offer a contemporary teaching design using typical Web 2.0 characteristics such as comments, discussions and social media integration which covers facebook and Twitter support, as nowadays, this is a common part of students’ everyday life. This weblog (blog)-based seminar for Advertising Psychology was set up in order to make the course accessible to students from different campuses in the Ruhr metropolitan area. The technical aspect of the open-source content management system Drupal 6.0 and the didactical course structure, based on Merrill’s five first principles of instruction, are introduced. To date, this blog seminar has been conducted three times with a total of 84 participants, who were asked to rate the course according to the benefits of different didactical elements and with regard to Kirkpatrick’s levels of evaluation model. This model covers a) reactions such as reported enjoyment, perceived usefulness and perceived difficulty, and b) effects on learning through the subjectively reported increase in knowledge and attitude towards the seminar. Overall, the blog seminar was evaluated very positively and can be considered as providing support for achieving the learning objectives. However, a successful blended learning approach should always be tailored to the learning contents and the environment.