Commissioning and performance of the CMS silicon strip tracker with cosmic ray muons

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The CMS experiment at the CERN LHC

The Compact Muon Solenoid (CMS) detector is described. The detector operates at the Large Hadron Collider (LHC) at CERN. It was conceived to study proton-proton (and lead-lead) collisions at a centre-of-mass energy of 14 TeV (5.5 TeV nucleon-nucleon) and at luminosities up to 10(34)cm(-2)s(-1) (10(27)cm(-2)s(-1)). At the core of the CMS detector sits a high-magnetic-field and large-bore superconducting solenoid surrounding an all-silicon pixel and strip tracker, a lead-tungstate scintillating-crystals electromagnetic calorimeter, and a brass-scintillator sampling hadron calorimeter. The iron yoke of the flux-return is instrumented with four stations of muon detectors covering most of the 4 pi solid angle. Forward sampling calorimeters extend the pseudo-rapidity coverage to high values (vertical bar eta vertical bar <= 5) assuring very good hermeticity. The overall dimensions of the CMS detector are a length of 21.6 m, a diameter of 14.6 m and a total weight of 12500 t.

On homoclinic chaos and a control chaos strategy applied to a free-joint nonholonomic manipulator

In this work, the occurrence of chaos (homoclinic scene) is verified in a robotic system with two degrees of freedom by using Poincare-Mel'nikov method. The studied problem was based on experimental results of a two-joint planar manipulator-first joint actuated and the second joint free-that resides in a horizontal plane. This is the simplest model of nonholonomic free-joint manipulators. The purpose of the present study is to verify analytically those results and to suggest a control strategy.

On chaotic behavior of a fixed offshore structure

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo de bactérias do gênero Gluconobacter: isolamento, purificação, identificação fenotípica e molecular

A importância do estudo de bactérias acéticas, em especial as do gênero Gluconobacter, está baseada em suas aplicações industriais, pois estas possuem a capacidade de bioconversão de sorbitol a sorbose, viabilizando o processo de produção de vitamina C. O estudo envolveu coletas de amostras em indústrias de refrigerante, flores, frutos e mel, seguidas de purificação, identificação fenotípica e identificação molecular, com a utilização de iniciador definido a partir de consulta ao Nucleotide Sequence Database. Preservaram-se as linhagens identificadas como membros da família Acetobacteriaceae, gênero Gluconobacter. Foi isolado um total de 110 linhagens dos substratos: Pyrostegia venusta (Cipó de São João), mel, Vitis vinifera (uva), Pyrus communis (pêra), Malus sp. (maçã) e de duas amostras de refrigerantes envasados em embalagens de PET de 2 L. Deste total, 57 linhagens foram recuperadas em meio MYP (manitol, extrato de levedura, peptona), 12 em meio YGM (glicose, manitol, extrato de levedura, etanol, ácido acético), 41 em meio de enriquecimento e, posteriormente, em meio GYC (glicose, extrato de levedura e carbonato de cálcio). Obtiveram-se 68 linhagens identificadas como bastonetes Gram negativos. Destas, 31 foram caracterizadas bioquimicamente como pertencentes à família Acetobacteriaceae por serem catalase positivas, oxidase negativas e produtoras de ácido a partir de glicose. A caracterização dessas linhagens foi complementada com os testes bioquímicos: liquefação da gelatina, redução de nitrato, formação de indol e H2S e oxidação de etanol a ácido acético. Métodos moleculares foram aplicados para identificação do gênero Gluconobacter. Finalmente, oito linhagens foram caracterizadas como pertencentes ao gênero Gluconobacter. As linhagens encontram-se depositadas em coleção de cultura do laboratório de Microbiologia do Departamento de Biologia da UNESP, campus de Assis, estocadas em extrato de malte 20 a -196 ºC.

Botulismo de origem alimentar

O botulismo alimentar ocorre pela ingestão de toxinas pré-formadas pelo Clostridium botulinum, consideradas as mais potentes dentre as toxinas conhecidas. Caracteriza-se como uma doença de extrema gravidade, de evolução aguda, provoca distúrbios digestivos e neurológicos, em conseqüência à ingestão de diversos tipos de alimentos. As conservas caseiras estão entre os alimentos que oferecem maior risco à população consumidora. Os produtos de origem animal são frequentemente associados aos surtos da doença, destacando-se os embutidos, tais como salsichas, salames, presuntos e patês. Derivados do leite e enlatados, bem como produtos fermentados, são passíveis de provocar a intoxicação. As outras formas naturais da doença são botulismo por feridas e botulismo infantil, normalmente associado ao consumo de mel contendo esporos do Clostridium botulinum.

Melatonin in maturation media fails to improve oocyte maturation, embryo development rates and DNA damage of bovine embryos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

THE EFFECT OF TUBEROINFUNDIBULAR DOPAMINERGIC-NEURONS ON PROLACTIN AND ALPHA-MELANOCYTE STIMULATING HORMONE-RELEASE

The effect of tubero-infundibular dopaminergic neurons (TIDA) on the release of prolactin (PRL) and alpha-melanocyte stimulating hormone (alpha-MSH) was studied in median eminence-lesioned (MEL) male rats (N = 6-28). Plasma PRL and alpha-MSH levels were significantly elevated 2 (86.1 +/- 19.8 and 505.1 +/- 19.1 ng/ml), 4 (278.7 +/- 15.5 and 487.4 +/- 125.1 ng/ml), 7 (116.2 +/- 16.2 and 495.8 +/- 62.6 ng/ml) and 14 (247.3 +/- 26.1 and 448.4 +/- 63.8 ng/ml) days after MEL when compared to sham-operated control animals (55.5 +/- 13.4 and 56.2 +/- 6.1 ng/ml, respectively). MEL altered plasma PRL and alpha-MSH levels in a differential manner, with a 1.5-to 5.0-fold increase in PRL and an 8.0-to 9.0-fold increase in alpha-MSH. The increase of alpha-MSH levels occurred abruptly and remained constant from days 2 to 14. These observations indicate that TIDA plays an important role in the pituitary release of PRL and alpha-MSH and provide evidence that the release of the two hormones occurs in a differential manner.

Electronic ballast for multiple fluorescent lamp systems

An electronic ballast for multiple tubular fluorescent lamp systems is presented. The proposed structure has a high value for the power factor, a dimming capability, and soft switching of the semiconductor devices operated at high frequencies. A zero-current switching pulse width modulated SEPIC converter is used as the rectifying stage and it is controlled using the instantaneous average input current technique. The inverting stage consists of classical resonant half-bridge converter with series-resonant parallel-loaded filters. The dimming control technique is based on varying the switching frequency and monitoring the phase shift of the current drained by the filters and lamps in order to establish a closed loop control. Experimental results are presented that validate the theoretical analysis.

Sintering of ZnO doped SnO2

Dense SnO2 ceramics were obtained by doping with ZnO concentrations varies from 0.5 to 5.0 mel. The obtained powder was isostaticaly pressed to 210MPa in cylindrical shape and sintered from ambient to 1.500 degrees C using constant heating rate of 10 degrees C/min. Densities above 97% were obtained depending on the ZnO doping concentration. A maximum density was reached with the addition of 2 mol%. It can be concluded from shrinkage data and the observed microstructure obtained by SEM that the solid solution limit for ZnO in SnO2 is about 1.0 mol%. Above this concentration the formation of a second ceramic phase is observed.

Solubilização de fosfatos de rocha por Aspergillus niger em diferentes tipos de vinhaça

Aspergillus niger was inoculated into flasks containing mixed of different origins and fluorapatite as a source of phosphorus, or alternatively rock phosphates of different compositions. There was no difference in fungal growth or fluorapatite solubilization when sterilized or unsterilized vinasse was used. Total and soluble solid content was at least two times higher in 65/35 vinasse than in 10/1 vinasse. The higher total sugar content causing higher titratable acidity levels, or the lower fungal growth, may possibly have favored the greater accumulation of soluble phosphate in 10/1 than in 65/10 vinasse. No appreciable differences in residual soluble phosphate levels were detected with increasing fluorapatite concentrations. Rock phosphates of different origins and with different phosphorus concentrations affected the solubilizing ability of the fungus. Whereas crude concentrated apatite phosphorus favored the greatest accumulation of soluble phosphate in the culture medium (1.08 mg/ml), the highest solubilization (72% total phosphate) was achieved with Patos de Minas material obtained from the first crushing.

Aggregation behaviour of hydrophobically modified poly(allylammonium) chloride

The behaviour of hydrophobically modified poly(allylammonium) chloride having octyl, decyl, dodecyl and hexadecyl side chains has been studied in aqueous solution using fluorescence emission techniques. Micropolarity studies using the I-1/I-3 ratio of the vibronic bands of pyrene show that the formation of hydrophobic microdomains depends on both the length of the side chain and the polymer concentration. The I-1/I-3 ratio of the polymers with low hydrophobe content (less than 5% mel) changes substantially when reaching a certain concentration. These changes are assigned to aggregation originating from interchain interactions. This behaviour is also confirmed by the behaviour of the monomer/excimer emission intensities of pyrene- dodecanoic acid used as a probe. For polymers having dodecyl side chains and hydrophobe contents higher than 10%, aggregates are formed independently of the polymer concentration. Anisotropy measurements show that microdomains resulting from the inter- and/or intramolecular interactions are similar to those observed for cationic surfactants. Viscosity measurements show that the coil dimensions are substantially decreased for the polymers having high hydrophobe contents, indicating intramolecular associations.

Model for electrodes' filaments of hot cathode fluorescent lamps, during preheating with constant rms current

This paper presents a new model for the representation of electrodes' filaments of hot-cathode fluorescent lamps, during preheating processes based on the injection of currents with constant root mean square (rms) values. The main improvement obtained with this model is the prediction of the R-h/R-c ratio during the preheating process, as a function of the preheating time and of the rms current injected in the electrodes. Using the proposed model, it is possible to obtain an estimate of the time interval and the current that should be provided by the electronic ballast, in order to ensure a suitable preheating process. is estimate of time and current can be used as input data in the design of electronic ballasts with programmed lamp start, permitting the prediction of the R-h/R-c ratio during the initial steps of the design (theoretical analysis and digital simulation). Therefore, the use of the proposed model permits to reduce the necessity of several empirical adjustments in the prototype, in order to set the operation of electronic ballasts during the preheating process. This fact reduces time and costs associated to the global design procedure of electronic ballasts.