Laser-Sintern. Die Schluesseltechnologie des e-Manufacturing TM

e-Manufacturing™, das ist die schnelle, flexible und kostengünstige Fertigung von Produkten, Formen/Werkzeugen oder Modellen direkt aus elektronischen Daten. e-Manufacturing™ schließt Rapid Prototyping, Rapid Tooling oder Rapid Manufacturing ein, geht aber zugleich weit über den Gedanken der schnellen Verfügbarkeit hinaus. Zwar wird auch in Zukunft die schnelle Produktentwicklung eine immer wichtigere Rolle spielen, bei der e-Manufacturing™ für ein verkürztes Time to Market sorgt, Entwicklungskosten verringert und zur Risikominimierung beiträgt. Darüber hinaus entstehen aber auch neue Geschäftsmodelle, da Kleinserienproduktion, steigende Variantenvielfalt und eine individualisierte Produktion (Mass Customization) plötzlich möglich und wirtschaftlich sind und sich neue Logistikkonzepte wie (Spare) parts on demand entwickeln. Die neue Konstruktionsfreiheit des Laser-Sinterns ermöglicht neue Produktkonzepte. Minimale Einschränkungen durch das Fertigungsverfahren erlauben funktionelle Integration und die Fertigung des „Unmöglichen“, da kreisförmige und lineare Werkzeugbewegungen das Produktdesign nicht mehr beeinflussen bzw. limitieren. Auch die Fertigungskonzepte unterliegen einem Wandel und werden deutlich flexibler. Werkzeuglose Produktion, losgrößenangepasste Fertigung und dezentrale Fertigung on demand sind die Schlagworte der Zukunft. Der vorliegende Beitrag zeigt Beispiele für den erfolgreichen kommerziellen Einsatz von Laser-Sintern in allen Phasen des Produktlebenszyklus. Der Schwerpunkt liegt dabei auf der direkten Herstellung von Funktionsteilen in der Serienfertigung. Die entscheidenden Faktoren für eine erfolgreiche Einführung und Anwendung von e-Manufacturing™ werden diskutiert. Der Beitrag zeigt auf, wie die neuesten technologischen Innovationen im Laser-Sintern, speziell zur Produktivitätssteigerung, das Spektrum der Anwendungsfelder erweitern, in denen dieses Fertigungsverfahren kostengünstige Lösungen bietet.

Neue Dimensionen in der 3D-Drucktechnologie

Die heute kommerziell verfügbaren generativen Fertigungsverfahren und deren Folgeprozesse ermöglichen die Verarbeitung einer Vielzahl unterschiedlicher Werkstoffe. Bei der Herstellung von funktionalen Prototypen werden die Leistungsgrenzen dieser Technologien jedoch schnell erreicht, sodass Kompromisse und Einschränkungen beim Einsatz der Prototypen in Kauf genommen werden müssen. Die Gründe hierfür liegen bei den sehr hohen Anforderungen, die sowohl an das Serienteil als auch an die Prototypen gestellt werden. Alle Forderungen bezüglich der mechanischen, topographischen und physikalischen Eigenschaften zu erfüllen, ist aus technologischer Sicht nicht möglich, da die RP-Verfahren nicht die Fertigungsbedingungen in der Serienproduktion abbilden können. Um dennoch der steigenden Nachfrage speziell der kunststoffverarbeitenden Industrie nach serienidentischen Prototypen und funktionalen Kleinserien nach zu kommen, wurde ein neues Werkstoff-, Technologie- und Maschinenkonzept basierend auf der 3D-Drucktechnologie entwickelt.

Geänderte Zielsetzungen bei der Konfiguration und dem Betrieb von Fließmontagesystemen und deren Berücksichtigung in der Fachliteratur

Ursprünglich zielte die Gestaltung von Montagesystemen in Form von Fließsystemen auf eine gleichmäßig hohe Stückzahl eines einzelnen Produkts bei hohem Automatisierungsgrad ab. Aus Gründen wie z.B. ständig zunehmende Anforderungen durch Kundenwünsche oder Absatzveränderungen sind die Montageprozesse fortwährend an die veränderten Rahmenbedingungen anzupassen. In diesem Zusammenhang gewinnen Gesichtspunkte wie Flexibilität, höhere Verfügbarkeit bzw. Nutzungsgrade, Energieeffizienz und Wirtschaftlichkeit stärker an Bedeutung. Die Konfiguration und Planung von Fließmontagesystemen erfolgt i.d.R. durch die Zerlegung der gesamten Planungsprobleme in kleine Teilprobleme, die durch unterschiedliche Planungsmaßnahmen bzw. systematische Planungs-schritte lösbar sind. Mit den vorstehenden Hinweisen ist außerdem nur ein Teil der Gesichtspunkte aufgeführt, die aus heutiger Sicht zu geänderten (ergänzten) Zielsetzungen führen. Der Beitrag wird diese Veränderungen durch Darstellung eines sinnvollen zielführenden Katalogs von Zielsetzungen und dessen Abgleich mit der Fachliteratur nachvollziehbar machen.

The Implementation of the Audiovisual Media Services Directive by National Regulatory Authorities National Responses to Regulatory Challenges

The Audiovisual Media Services Directive (AVMSD) which regulates broadcasting and on-demand audiovisual media services is at the nexus of current discussions about the convergence of media. The Green Paper of the Commission of April 2013 reflects the struggle of the European Union to come to terms with the phenomenon of convergence and highlights current legal uncertainties. The (theoretical) quest for an appropriate and future-oriented regulatory framework at the European level may be contrasted to the practice of national regulatory authorities. When faced with new media services and new business models, national regulators will inevitably have to make decisions and choices that take into account providers’ interests to offer their services as well as viewers’ interests to receive information. This balancing act performed by national regulators may tip towards the former or latter depending on the national legal framework; social, political and economic considerations; as well as cultural perceptions. This paper thus examines how certain rules contained in the AVMSD are applied by national regulators. It focuses first on the definition of an on-demand audiovisual media service and its scope. Second, it analyses the measures adopted with a view to protection minors in on-demand services and third discusses national approaches towards the promotion of European works in on-demand services. It aims at underlining the significance of national regulatory authorities and the guidelines these adopt to clarify the rules of a key EU Directive of the “media law acquis”.

Digital Systems for Open Access to Formal and Informal Learning

Today, Digital Systems and Services for Technology Supported Learning and Education are recognized as the key drivers to transform the way that individuals, groups and organizations “learn” and the way to “assess learning” in 21st Century. These transformations influence: Objectives - moving from acquiring new “knowledge” to developing new and relevant “competences”; Methods – moving from “classroom” based teaching to “context-aware” personalized learning; and Assessment – moving from “life-long” degrees and certifications to “on-demand” and “in-context” accreditation of qualifications. Within this context, promoting Open Access to Formal and Informal Learning, is currently a key issue in the public discourse and the global dialogue on Education, including Massive Open Online Courses (MOOCs) and Flipped School Classrooms. This volume on Digital Systems for Open Access to Formal and Informal Learning contributes to the international dialogue between researchers, technologists, practitioners and policy makers in Technology Supported Education and Learning. It addresses emerging issues related with both theory and practice, as well as, methods and technologies that can support Open Access to Formal and Informal Learning. In the twenty chapters contributed by international experts who are actively shaping the future of Educational Technology around the world, topics such as: - The evolution of University Open Courses in Transforming Learning - Supporting Open Access to Teaching and Learning of People with Disabilities - Assessing Student Learning in Online Courses - Digital Game-based Learning for School Education - Open Access to Virtual and Remote Labs for STEM Education - Teachers’ and Schools’ ICT Competence Profiling - Web-Based Education and Innovative Leadership in a K-12 International School Setting are presented. An in-depth blueprint of the promise, potential, and imminent future of the field, Digital Systems for Open Access to Formal and Informal Learning is necessary reading for researchers and practitioners, as well as, undergraduate and postgraduate students, in educational technology.

Ansätze zum Management der Additive Manufacturing Supply Chain

Da sich Additive Manufacturing (AM) von traditionellen Produktionsverfahren unterscheidet, entstehen neue Möglichkeiten im Produktdesign und im Supply Chain Setup. Die Auswirkungen der Aufhebung traditionellen Restriktionen im Produktdesign werden unter dem Begriff „Design for Additive Manufacturing“ intensiv diskutiert. In gleicher Weise werden durch AM Restriktionen im traditionellen Supply Chain Setup aufgehoben. Insbesondere sind die folgenden Verbesserungen möglich: Reduktion von Losgrössen und Lieferzeiten, bedarfsgerechte Produktion auf Abruf, dezentrale Produktion, Customization auf Ebene Bauteil und kontinuierliche Weiterentwicklung von Bauteilen. Viele Firmen investieren nicht selbst in die AM Technologien, sondern kaufen Bauteile bei Lieferanten. Um das Potential der AM Supply Chain mit Lieferanten umzusetzen, entstehen die folgenden Anforderungen an AM Einkaufsprozesse. Erstens muss der Aufwand pro Bestellung reduziert werden. Zweitens brauchen AM Nutzer einen direkten Zugang zu den Lieferanten ohne Umweg über die Einkaufsabteilung. Drittens müssen geeignete AM Lieferanten einfach identifiziert werden können. Viertens muss der Wechsel von Lieferanten mit möglichst geringem Aufwand möglich sein. Ein mögliche Lösung sind AM spezifische E-Procurement System um diese Anforderungen zu erfüllen

Traffic-Adaptive and Link-Quality-Aware Communication in Wireless Sensor Networks

This paper is a summary of the main contribu- tions of the PhD thesis published in [1]. The main research contributions of the thesis are driven by the research question how to design simple, yet efficient and robust run-time adaptive resource allocation schemes within the commu- nication stack of Wireless Sensor Network (WSN) nodes. The thesis addresses several problem domains with con- tributions on different layers of the WSN communication stack. The main contributions can be summarized as follows: First, a a novel run-time adaptive MAC protocol is intro- duced, which stepwise allocates the power-hungry radio interface in an on-demand manner when the encountered traffic load requires it. Second, the thesis outlines a metho- dology for robust, reliable and accurate software-based energy-estimation, which is calculated at network run- time on the sensor node itself. Third, the thesis evaluates several Forward Error Correction (FEC) strategies to adap- tively allocate the correctional power of Error Correcting Codes (ECCs) to cope with timely and spatially variable bit error rates. Fourth, in the context of TCP-based communi- cations in WSNs, the thesis evaluates distributed caching and local retransmission strategies to overcome the perfor- mance degrading effects of packet corruption and trans- mission failures when transmitting data over multiple hops. The performance of all developed protocols are eval- uated on a self-developed real-world WSN testbed and achieve superior performance over selected existing ap- proaches, especially where traffic load and channel condi- tions are suspect to rapid variations over time.

Mobile Cloud Networking: Virtualisation of Cellular Networks

Virtualisation of cellular networks can be seen as a way to significantly reduce the complexity of processes, required nowadays to provide reliable cellular networks. The Future Communication Architecture for Mobile Cloud Services: Mobile Cloud Networking (MCN) is a EU FP7 Large-scale Integrating Project (IP) funded by the European Commission that is focusing on cloud computing concepts to achieve virtualisation of cellular networks. It aims at the development of a fully cloud-based mobile communication and application platform, or more specifically, it aims to investigate, implement and evaluate the technological foundations for the mobile communication system of Long Term Evolution (LTE), based on Mobile Network plus Decentralized Computing plus Smart Storage offered as one atomic service: On-Demand, Elastic and Pay-As-You-Go. This paper provides a brief overview of the MCN project and discusses the challenges that need to be solved.

Streaming Support for Data Intensive Cloud-Based Sequence Analysis

Cloud computing provides a promising solution to the genomics data deluge problem resulting from the advent of next-generation sequencing (NGS) technology. Based on the concepts of “resources-on-demand” and “pay-as-you-go”, scientists with no or limited infrastructure can have access to scalable and cost-effective computational resources. However, the large size of NGS data causes a significant data transfer latency from the client’s site to the cloud, which presents a bottleneck for using cloud computing services. In this paper, we provide a streaming-based scheme to overcome this problem, where the NGS data is processed while being transferred to the cloud. Our scheme targets the wide class of NGS data analysis tasks, where the NGS sequences can be processed independently from one another. We also provide the elastream package that supports the use of this scheme with individual analysis programs or with workflow systems. Experiments presented in this paper show that our solution mitigates the effect of data transfer latency and saves both time and cost of computation.

REST-based sensor networks with OData

RESTful services gained a lot of attention recently, even in the enterprise world, which is traditionally more web-service centric. Data centric RESfFul services, as previously mainly known in web environments, established themselves as a second paradigm complementing functional WSDL-based SOA. In the Internet of Things, and in particular when talking about sensor motes, the Constraint Application Protocol (CoAP) is currently in the focus of both research and industry. In the enterprise world a protocol called OData (Open Data Protocol) is becoming the future RESTful data access standard. To integrate sensor motes seamlessly into enterprise networks, an embedded OData implementation on top of CoAP is desirable, not requiring an intermediary gateway device. In this paper we introduce and evaluate an embedded OData implementation. We evaluate the OData protocol in terms of performance and energy consumption, considering different data encodings, and compare it to a pure CoAP implementation. We were able to demonstrate that the additional resources needed for an OData/JSON implementation are reasonable when aiming for enterprise interoperability, where OData is suggested to solve both the semantic and technical interoperability problems we have today when connecting systems

The Olive Tree, Vol. 15 Number 2, 2007

The fall 1007 issue of The Olive Tree features articles about library projects, collections, technological innovations, and events at Fogler Library, University of Maine.

An Architecture to offer Cloud-Based Radio Access Network as a Service

This paper addresses the novel notion of offering a radio access network as a service. Its components may be instantiated on general purpose platforms with pooled resources (both radio and hardware ones) dimensioned on-demand, elastically and following the pay-per-use principle. A novel architecture is proposed that supports this concept. The architecture's success is in its modularity, well-defined functional elements and clean separation between operational and control functions. By moving much processing traditionally located in hardware for computation in the cloud, it allows the optimisation of hardware utilization and reduction of deployment and operation costs. It enables operators to upgrade their network as well as quickly deploy and adapt resources to demand. Also, new players may easily enter the market, permitting a virtual network operator to provide connectivity to its users.

A Case for CDN-as-a-Service in the Cloud: A Mobile Cloud Networking Argument

Content Distribution Networks are mandatory components of modern web architectures, with plenty of vendors offering their services. Despite its maturity, new paradigms and architecture models are still being developed in this area. Cloud Computing, on the other hand, is a more recent concept which has expanded extremely quickly, with new services being regularly added to cloud management software suites such as OpenStack. The main contribution of this paper is the architecture and the development of an open source CDN that can be provisioned in an on-demand, pay-as-you-go model thereby enabling the CDN as a Service paradigm. We describe our experience with integration of CDNaaS framework in a cloud environment, as a service for enterprise users. We emphasize the flexibility and elasticity of such a model, with each CDN instance being delivered on-demand and associated to personalized caching policies as well as an optimized choice of Points of Presence based on exact requirements of an enterprise customer. Our development is based on the framework developed in the Mobile Cloud Networking EU FP7 project, which offers its enterprise users a common framework to instantiate and control services. CDNaaS is one of the core support components in this project as is tasked to deliver different type of multimedia content to several thousands of users geographically distributed. It integrates seamlessly in the MCN service life-cycle and as such enjoys all benefits of a common design environment, allowing for an improved interoperability with the rest of the services within the MCN ecosystem.

Functional polypyrrole coatings for wirelessly controlled magnetic microrobots

A wirelessly controlled magnetic microrobot has been proposed to diagnose and treat pathologies in the posterior segment of the human eye. The robot consists of a magnetic CoNi platform with a conformal coating of functional polymers. Electrodeposition has been the preferred method to fabricate and to functionalize the microrobot. Poly(pyrrole), a widely studied intrinsically conductive polymer has been investigated as a biocompatible coating to reduce biofouling, and as a coating that can release incorporated drugs on demand. The mechanism of redox cycling has been investigated to reduce the stiction of NIH 3T3 fibroblasts onto poly(pyrrole) surfaces. To demonstrate triggered drug release, Rhodamine B has been incorporated into the Ppy matrix as a model drug. Rapid Rhodamine B release is obtained when eddy current losses are induced by alternating magnetic fields on the CoNi substrates underneath these films.

In vitro rescue of FGA deletion by lentiviral transduction of an afibrinogenemic patient's hepatocytes.

BACKGROUND: Congenital afibrinogenemia is a rare inherited autosomal recessive disorder in which a mutation in one of three genes coding for the fibrinogen polypeptide chains Aα, Bβ and γ results in the absence of a functional coagulation protein. A patient with congenital afibrinogenemia, resulting from an FGA homozygous gene deletion, underwent an orthotopic liver transplant that resulted in complete restoration of normal hemostasis. The patient's explanted liver provided a unique opportunity to further investigate a potential novel treatment modality. OBJECTIVE: To explore a targeted gene therapy approach for patients with congenital afibrinogenemia. METHODS AND RESULTS: At the time of transplant, the patient's FGA-deficient hepatocytes were isolated and transduced with lentiviral vectors encoding the human fibrinogen Aα-chain. FGA-transduced hepatocytes produced fully functional fibrinogen in vitro. CONCLUSIONS: Orthotopic liver transplantation is a possible rescue treatment for failure of on-demand fibrinogen replacement therapy. In addition, we provide evidence that hepatocytes homozygous for a large FGA deletion can be genetically modified to restore Aα-chain protein expression and secrete a functional fibrinogen hexamer.